Hebrock Akv 3003 Dkf pirkti naudotą (51)

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Nlsdslht Hzspfx Abmoh Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, maks. briaunos storis: 3 mm ruloninė / 8 mm juostinė medžiaga Rulonų pjovimo agregatas Nupjovimo pjūklas Nledpoxpu N Nofx Abmeh Kraštų frezavimo agregatas, kombinuotas frezavimas Matmenys: apie 3300 x 1400 x 1300 mm (IxPxA) Svoris: apie 550 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Edgebanding Machine Hebrock F 4 with Jointing, Corner Copying, and Two Scrapers. Very well-maintained machine from a small business, in excellent condition. Color touch-screen interface with PLC control for easy operation of the machine, allowing storage of 10 operating programs. Edge thickness roll: approx. 0.4 – 2 mm Workpiece height: approx. 10 – 40 mm Feed rate: approx. 7 m/min Noise protection hood Extendable workpiece support Extraction connection: 1 x 140 mm Units: Top pressure, manual adjustment with SIKO counter Infeed fence, manual adjustment with SIKO counter Edge thickness, manual adjustment with SIKO counter Jointing with diamond cutters, cutters resharpened Gluing unit with automatic edge feed for roll material up to 2 mm Glue pot with quick color change device Pressure zone with 3 rollers Cut-off saw Combination milling unit, R2, with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Corner rounding unit R2, pneumatically adjustable between thin and thick edge Nodsw Sn I Eepfx Abmolh The profile milling unit can also be used for shelf programs; i.e., only the straight edge is rounded, not the corners Glue joint scraper, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent on request. All reversible knives of the milling units and scrapers have been replaced or rotated, saws have been resharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork damage has been repaired. The machine has approx. 335 operating hours and has processed approx. 20,700 linear meters of edge material. The machine is in very good condition, see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "further offers from this seller."

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10/3201, Siūlome gerai prižiūrėtą Hebrock SBM 10. Tikra retenybė. Karštų klijų dengimo įrenginys standartinėms briaunų medžiagoms dengti ir efektyviam lukšto juostelių atlieku panaudojimui. Nlodpfsxmbkhex Abmjh

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3074, Y ašies padavimo greitis: 10 m/min, bendras ilgis: 4 984 mm, ruošinio aukštis (maks.): 60 mm, bendras plotis: 1 425 mm, briaunos storis (maks.): 3 mm, bendras aukštis: 1 618 mm, bendras svoris: 1 400 kg, įvesties srovės tipas: trifazis, aukščio reguliavimo tipas: mechaninis, įėjimo įtampa: 400 V, ekstrakcijos antgalio skersmuo: 140 mm, darbinio aukščio: 888 mm, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, ištraukimo jungties skersmuo: 140 mm, paskutinio kapitalinio remonto metai: 2025, Due to the procurement of a new machine, we are selling our reliable edge banding machine, purchased new in 2016. The machine was operated in an 8-person joinery workshop. A complete overhaul was performed in January 2025, including new radius scrapers, new milling tools, and new polishing wheels. The pre-milling unit was re-sharpened. The coupling of the glue roller shaft was replaced. The glue tank underwent thorough refurbishment and cleaning. The machine is suitable for EVA granulate (e.g., Henkel Dorus KS351) and PUR gluing as well. The degree of pre-milling, edge band thickness, and the position of the lower and upper milling tools can all be conveniently adjusted by handwheels located outside the machine housing. The control system allows you to save custom edge banding programs. For 0.4 and 2.0 mm edge banding, the machine automatically switches pneumatically from the control panel. Main specifications: - Power rating: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen - Programmable/saved edge banding operations - Feed speed: 10 m/min - Edge material thickness in coil: 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding possible on 60 mm thick material) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Machining units: - Diamond pre-milling unit (12,000 rpm) - Separator fluid tank/sprayer Njdpfexlr S Hjx Abmelh - Gluing unit - End trimming saw - R2 milling unit - R2 radius scraper - Corner rounding unit - Cleaning fluid tank/sprayer - Flat scraper - Polishing wheel The price of the machine does not include VAT.

Sąlyga: naudotas, Kompaktiška briaunų klijavimo staklė Hebrock EURO 3001 tiksliam plokščių medžiagų briaunavimui su briaunų juostomis. Staklės užtikrina švarią briaunų apdirbimą automatiniu klijų užnešimu, prispaudimo voleliais ir apdirbimo agregatais. Idealiai tinka baldų gamybai ir interjero apdailai. Techniniai duomenys gali keistis. 1 agregatas: Klijų užnešimas Nledsxdc D Rspfx Abmjh 2 agregatas: Nupjovimas 3 agregatas: Lygus frezavimas Detalės aukštis: apie 10–40 mm Briaunos storis: maks. apie 12 mm Padavimo greitis: apie 10 m/min

Sąlyga: naujas, Gamybos metai: 2025, Hebrock F 4 For complete processing of your panels For those who don't do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges in just 4 m of machine length. The F 4 is not just space-saving – it is also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm PLC control via 10" touchscreen Nlodpfx Abjhqadcsmoh Top-mounted quick heating glue pot (maintenance-free) Support disc for edge material Automatic central lubrication (cut-off saw, corner milling unit) Optical indicator for workpiece sequence Outrigger (extendable to the front) Quick-change glue pot preparation including glue change device, suitable for PUR processing Surface scraper with dual sensor system Pneumatic trim shear (scissor-type design, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed, special chain plates Joiner Milling unit Cut-off saw Corner milling unit Accessories: F4/09 radius scraper (incl. pneumatic lift-out) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: From stock 54634 Bitburg – available at short notice –

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. total connected load: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Nledpsglfwtofx Abmjh Extraction nozzle: Ø 1 x 140 mm Edge banding machine with PLC control Joint milling unit (incl. DIA tool) up to 2 mm milling depth Combination milling head Radius miller R=2 mm Radius corner miller R=2 mm Radius scraper blade R=2 mm

Sąlyga: naujas, Gamybos metai: 2025, HEBROCK briaunų klijavimo staklės F2 next su PLC valdymu (įskaitant jutiklinį ekraną) ir lydymosi klijų padavimu ant ruošinio, skirtiems briaunų medžiagai iki 3 mm: sujungimo freza (įskaitant DIA įrankį) iki 2 mm frezavimo gylio, be priežiūros klijų vonelė su keitimo rinkiniu ir klijų išbėgimo įranga, HF atkirtimo pjovimo stotis (apie 12 000 aps./min.), HF frezavimo stotis (apie 12 000 aps./min.) su atskiru pneumatiniu frezavimo reguliavimu ir keičiama peilių freza (kombinuota versija), tvirtas grandininis pavara, rutuliniu guoliu dvigubas viršutinis presas, matymo langas iš mašinos galinės pusės, ištraukiama ruošinio atrama, tiekimo greitis apie 10 m/min. Įskaičiuota: F2/500/10 sujungimo galvutė Whispercut Nlsdpfxowmdbrj Abmsh F2/500/20 kombinuota frezavimo galvutė F2/500/2 freza radiusui R=2mm F2/12 paviršiaus grandymo peilis (įskaitant pneumatinį pakėlimą)

Sąlyga: geras (naudotas), Gamybos metai: 2003, I am selling a HEBROCK HFF08 edge radius milling machine for shaped workpieces. Year of manufacture: 2003. Suitable for curved elements. In good condition, inspections are possible! Optionally, the edge banding machine AKV 088D is also available for purchase. Nlodpswun H Usfx Abmeh

Sąlyga: geras (naudotas), Gamybos metai: 2005, Markė: Hebrock Modelis: HFF 08 Mašinos Nr.: 08/379 Pagaminimo metai: 2005 Kraštų frezavimo staklės, skirtos vienu metu viršutiniam ir apatiniam spindulio/nulio švariam frezavimui nuo laužtų kraštų ant ruošinių su tiesiomis briaunomis bei ant apvalintų ruošinių su vidiniais ir išoriniais spinduliais. Techniniai duomenys: Maksimali kraštinės storis: apie 3 mm Maksimalus ruošinio aukštis: 50 mm Minimalus vidinis spindulys: 40 mm Frezavimo variklis: 12000 aps./min. Stalo aukštis: 865 mm Maks. slėgis: 6 bar Drožlių storis: 120 mm Frezavimo variklio galingumas: 0,37 kW Pagrindinis variklis: 1,5 kW, 50 Hz, 400 V, 3 fazės Nlsdpfxeq H Spvo Abmsh Sandėlio Nr.: 2001922

Sąlyga: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 1271, Maks. briaunos storis: 2 mm Min. ruošinio storis: 10 mm Maks. ruošinio storis: 40 mm Nlsdpfx Aevniu Uobmoh Min. ruošinio ilgis: 180 mm Padavimo greitis: 7 m/min Įšilimo laikas: 4 min Jungimo agregatas: Taip, su 2 frezavimo agregatais Jungimo įrankis: Deimantinis keičiamų plokštelių freza Įėjimo liniuotės reguliavimas: rankinis Nukirptuvė iki: 2 mm Briaunos padavimas pavieniui: įmanoma Klijavimas: kontaktinis klijavimo volelis Klijų talpa: keičiama su išleidimo kanalu PU klijavimas: įmanoma Pjūklelis: Taip Kombinuotas agregatas lygiavimas/fazavimas/radiusas: pneumatiškai reguliuojamas Kampų apvalinimo agregatas: pneumatiškai reguliuojamas Plokščioji grandymo geležtė: Taip, jautri Agregatų rodymas: ekrane Valdymo tipas: PLC valdymas Valdymas: jutiklinis ekranas Variklio galia: 7,4 kW Važiuoklė: Ne Ištraukiamas ritininis stalas: Taip Apsauginis gaubtas: Taip Svoris apie: 750 kg Ištraukimo skersmuo: 140 mm Darbinis metražas apie: 7 900 m

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Hebrock drying box for edge banding machine Year: 2020 Excellent condition - as new Njdpfx Abewqx Ememelh Location: available from stock, 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min. Weight: approx. 900 kg Max. total connected load: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min. Nledpfxshymgde Abmoh Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combi milling unit Radius milling R=2 mm Corner radius milling R=2 mm Radius scraper R=2 mm

Sąlyga: naujas, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (including touchscreen) Hotmelt adhesive application to the workpiece for edge material up to 3 mm Jointing cutter (including DIA tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change system including glue discharge device HF end trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combination version) Robust chain drive Nlodpfx Ajl D Rp Eobmjh Ball bearing-supported double roller upper pressure Inspection window on the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Sąlyga: naujas, Gamybos metai: 2025, Edge banding machine F5 with PLC control (incl. 15" touchscreen), thermoplastic glue application to the workpiece for edge material up to 3 mm: joint milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF milling station with pneumatic cutter adjustment, including corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift device), cleaning station Whispercut jointing head Combination cutter Nedpfsh Hl Ayex Abmslh Radius cutter R=2mm Radius corner cutter R=2mm Quick-change system for corner cutter Radius interchangeable motor R=1mm Multi-radius scraper R1/R2 Chassis Spray system for release agent (PUR) Spray system for cleaning agent (PUR) pneumatic 3-point adjustment LED lighting INCLUDES 2nd interchangeable glue pot max. edge thickness 3mm workpiece thickness 8-50mm min. workpiece length approx. 160mm feed speed 10m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300x1300x1400mm (LxWxH) Weight approx. 900kg Extraction connection 1 x 140mm

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Hebrock edge banding machine, model: F 4 Year of manufacture: 2024 Serial no. F 4371 / Including special equipment: Njdpfx Asvkv Eljbmelh - Quick-change device for corner rounding unit, No. F4/08/4 - Additional exchange motor for corner rounding unit, No. F4/08/5 - Radius scraper (pneumatic lift), No. F4/9 - Multi-radius scraper (R2/1), No. F4/09/4 - Spray device for release agent, No. F4/24/1 - Pneumatic 3-point adjustment, No. F4/30 - Jointing up to 50 mm workpiece thickness, No. F4/31 Commissioning of the machine on site can be carried out by Hebrock (factory instruction). Cost: €798 + VAT List price of the machine incl. equipment: €49,110 excl. VAT Machine available immediately

Sąlyga: naujas, Edge thickness: up to 3 mm Total length: 4122 mm Feed speed: 10 m/min with PLC control (including touchscreen) and hot melt glue monitoring at the workpiece for edge material up to 3 mm Jointing cutter (including DIA tooling) up to 2 mm milling depth1), maintenance-free glue pot with quick-change feature chip/scrap removal unit, HF (high-frequency) cut-off saw station (approx. 12,000 rpm), HF (high-frequency) milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination design), corner rounding milling unit, surface scraper (including pneumatic lift), spare station (for cleaning unit or radius scraper), robust chain drive, double roller top pressure with ball bearings, inspection window at rear of machine, extendable workpiece support, approx. 10 m/min feed. Item No. F4/00/11 - Jointing Head Whispercut F4/500/10 - Combination Milling Head F4/500/20 - Radius Milling Head R=2mm F4/500/2 - Radius Corner Milling Head R=2mm F4/08/2 - Quick-change Corner Milling Unit F4/08/4 - Radius Scraper (incl. pneumatic lift) F4/09 - Radius Scraper R=2mm F4/09/2 - Chassis F4/10 Nsdpfxsvwd Uuj Abmolh - Pneumatic 3-point adjustment (for radius, chamfer, flush milling) F4/30

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately Available - This Hebrock evergreen offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a profile milling unit and a multi-radius scraper, Hebrock sets new standards in perfect edge processing of various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Nsdpfx Aji Am Ukobmjlh Features: • Hebrock K 36 – 15 m/min • K36 Edge Banding Machine • With PLC control (incl. 15" touchscreen), hot-melt adhesive provision directly onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm milling depth, maintenance-free coated glue pot with quick-change preparation incl. glue discharge device, high-frequency double-motor end trim saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with pneumatic adjustment and quick-change insert milling cutter (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift-out device), buffing station, robust chain drive, double-roller upper pressure with ball bearings, aggregate viewing windows on both machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge banding on workpieces up to 60 mm thick • 36/08/1 Quick-change corner rounding unit • 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 • 36/09/1 Multi-radius scraper • 36/24/1 Separator spraying device • 36/24/2 Cleaning agent spraying device • 36/25 Edge protective spray • 36/27 Nesting (1x milling station + 1x radius scraper) • 36/30 Pneumatic 3-point adjustment • 36/30/1 Multitool for HF milling station (R2/R1/chamfer) • 36/45 Axis package for motorized adjustment of panel/edge thickness and jointing depth settings Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Corner rounding unit, radius R = 2 mm Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Nodpjg Tu Rkjfx Abmolh Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 800 kg, darbinio aukščio: 870 mm, galia: 11 kW (14,96 AG), ruošinio plotis (maks.): 70 mm, Technical data: - Max. edge thickness: 5 mm / 8 mm Nlsdpfx Absug Uqasmsh - Max. workpiece height: approx. 40 mm / 50 mm - Min. workpiece length: approx. 250 mm / 300 mm - Min. workpiece width: approx. 70 mm - Feed speed: approx. 11 m/min - Ready for operation: approx. 4.5 min - Power consumption: approx. 11 kW - Electrical connection: 230/400V / 50/60 Hz - Working table height: 870 mm - Dimensions (LxWxH): 4100 x 1400 x 1300 mm Condition and further details as shown in the pictures.

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Μηχανή επικόλλησης ακμών Hebrock F5 με σύστημα ελέγχου PLC, καζάνι ταχείας θέρμανσης με επικάλυψη, χωρίς απαιτήσεις συντήρησης, με προκαταρκτική ρύθμιση για γρήγορη αλλαγή του δοχείου κόλλας. Nledpjwyu Rwjfx Abmoh - Οθόνη αφής 10" - Μέγιστο πάχος ακμής 3mm - Ελάχιστο μήκος τεμαχίου 160mm - Ταχύτητα προώθησης 7m/min - Έτοιμη για λειτουργία σε περίπου 3,5 λεπτά - Μέγιστη κατανάλωση ισχύος 7,4kW - Ηλεκτρική σύνδεση 400V/3φ/50Hz - Ύψος τραπεζιού 900mm - Διαστάσεις μηχανήματος 4300x1300x1400 mm - Βάρος περίπου 900Kg Εξτρα εξοπλισμός • Κεφαλή προ-φρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Κεφαλή συνδυασμένης κοπής • Ακτίνα για στρογγύλεμα γωνιών R = 2mm • Στρογγύλεμα γωνιών ακτίνας R = 2mm • Συσκευή ταχείας αλλαγής για μοτέρ στρογγυλοποίησης γωνιών • Ξέστρο πολλαπλών ακτίνων R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Ψεκασμός προστασίας ακμών • Υποδοχή για φρεζαριστική μονάδα και ξέστρο προφίλ ακτίνας • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λοξογωνιά) • Εσωτερικός φωτισμός LED

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 ensures comprehensive edge processing in every step, as it comes equipped with all the components necessary to meet your requirements: jointer, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even greater flexibility towards achieving the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and hot-melt adhesive application onto the workpiece for edging materials up to 3 mm; jointer (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change facility including glue discharge device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window from the machine’s rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) Nljdpfxei Anado Abmoh F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: ex stock 54634 Bitburg Available calendar weeks: 4/2024

Sąlyga: naujas, Gamybos metai: 2025, Your entry into edge banding couldn’t be better, as the 3.3 m long F 2 is not only affordable and space-saving. It also comes equipped with all the features you need to achieve perfect edges from the very start: diamond-tipped jointing cutters ensure that your workpieces are optimally prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination cutter. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Nledpjglfw Njfx Abmsh Max. power consumption: Ø approx. 5.9 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: approx. 3350 x 1300 x 1400 mm (LxWxH) Worktable height: approx. 900 mm Weight: approx. 620 kg Extraction port: Ø 1 x 140 mm

Sąlyga: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Kantbandmaschine Hebrock K36 mit SPS-Steuerung, wartungsfreiem und beschichtetem Schnellheizleimbecken mit Vorbereitung für schnellen Leimtopfwechsel. - Touchscreen 10“ - Maximale Kantenstärke 3 mm - Minimale Werkstücklänge 200 mm - Minimale Werkstückbreite 80 mm - Vorschubgeschwindigkeit 10 m/min - Betriebsbereit in ca. 5 Minuten - Max. Anschlusswert 14 kW - Elektrischer Anschluss 400 V / 3 Ph / 50 Hz - Maschinenabmessungen 5250 x 1230 x 1430 mm - Gewicht ca. 1.700 kg Extras • Vorfräskopf Whispercut, Werkstückhöhe 60 mm • Beheizbarer Einlaufanschlag • Radius für Eckenrunder R = 2 mm • Schnellwechselvorrichtung für Motor Eckenrunder • Multi-Radiusziehklinge R2/R1 • 60 mm Werkstückhöhe – Eckenrunden • Trennmittel-Sprüheinrichtung • Reinigungsmittel-Sprüheinrichtung • Schutzsprühkante • Nesting-Vorrichtung • Pneumatische 3-Punkt-Verstellung • Multiwerkzeug (R2/R1/Fase) • LED-Innenbeleuchtung • Einrichtung für kurze Werkstücke • Vorbereitung für Rückführsystem (barbaric) • Achspaket / motorische Höhen-, Kanten- und Vorfräsverstellung Njdpowyu E Uofx Abmslh • Zusätzliche Werkstück-Ein- und Auslaufunterstützung (je 450 mm)