Briaunų klijavimo staklės

HEBROCK Top 2000

Būklė: geras (naudotas), Kantavimo staklės Hebrock top 2000 Klijų padengimas voleliu Pneumatinė išankstinio pjovimo giljotina Prispaudimo voleliai Galutinis nupjovimo pjūklas Frezuojantis agregatas viršus-apačia R1-R2 Maksimalus ruošinio aukštis 50 mm Maksimalus briaunos storis ritinyje 3 mm Padavimo greitis 10 m/min Ndedpfjy Rpicex Ahcjb Staklių ilgis 310 cm Tvarkinga, geros būklės staklės.

Gamybos metai: 2000, būklė: geras (naudotas), Barberan Laminating Line For all inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Njdpfx Ahsilqvrjcedb Maximum element length: 2800 mm Minimum element length: approx. 600 mm Continuously adjustable speed from the brushing machine, maximum speed: 20 m/min. The line includes: - Tommassini automatic loader (not operational) - Top and bottom brushing machine - Pre-heating lamps for the top and bottom glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Steel calender line for pressing - Additionally, the line is equipped with a purchased corona treatment unit for the upper surface (functional) – allows for single-side laminating with PP films

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread 2x safety clamps Pneumatic foot switch Table size: 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Ndodpfjh U Damsx Ahcsb Unfortunately, we are unable to respond to inquiries without complete contact details.

Būklė: naudotas, mašinos/transporto priemonės numeris: 008388, X ašies darbo sritis: 3086 mm Y ašies darbo sritis: 2185 mm Darbinis paviršius: Nestingo stalas Pagrindinio veleno galia: 15 kW Nodpfxeyngzvj Ahcodb Valdomų ašių skaičius: 4 ašys Gręžimo velenų skaičius: 18 Įrankių pozicijų skaičius: 20

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Cutting area: 5300 x 2240/2100 x 80 mm Ndjdpjyx H Dtjfx Ahcjb Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring saw unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Precision manufacturing of machine components to 1/100 mm • Massive, self-supporting, solid-welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch multiplex plywood with integrated small-part support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of center support • Automatic roller locking during the sawing process Saw Beam • Sturdy, durable saw beam steel construction • Automatic saw beam locking with interface detection Saw Unit • Play-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced convenience thanks to largely automated operation • Laser-assisted indication of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy changeover to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control System • 12" touchscreen computer with optimal user guidance • Multilingual operation guidance • Tool database ensures high flexibility and absolute repeat accuracy • Fully automatic saw cycle • Infinitely variable feed speeds 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • USV 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning ASP Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design & Ergonomics • Typical STRIEBIG product design • Multiple awards (including Design Prize Switzerland) • Functional and user-optimized ergonomics Installation • Wall-mounted or free-standing installation possible

Būklė: naudotas, Agregatas pasukamas, grandinės plotis 10 mm Sandėlio vieta: Nattheim Nsdpfx Ahsvvku Ejcodb

Būklė: naujas, Gamybos metai: 2023, New machine Ndedpow I U Drsfx Ahcjb Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with discharge function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, and integrated distance control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer tape, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. - 3 free slots for finishing units - 10" color touchscreen Machine length: 4030 mm Workpiece thickness: 8 - 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4 – 3.0 mm Pre-milling unit cutting depth: 0 – 2.0 mm, stepless Total installed power: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraper unit with air-blast device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with discharge function - Surcharge for diamond tools, height = 65mm, for pre-milling unit - Riepe spray device (anti-adhesive) at pre-milling unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° elbow + hand slider, mounted on machine, D = 200 mm Availability: short-term Location: Hochheim

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin Nsdpfodh Tfgsx Ahcjdb SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, Spray/Paint Booth !! This is a brand new machine directly from the manufacturer; we are the producers. The photos are from previous customer installations !! Professional spray/paint booth Reinox 300×235, ideal for medium-sized parts and series production. Designed for use in explosive environments (EX certification), it offers high extraction performance, efficient three-phase filtration, and reliability during continuous operation. Technical specifications: - Fan certified for ATEX zone 22 - Extraction area: 3000 × 1900 mm - Overall dimensions: 3100 × 2350 × 1910 mm - Dimensions exclude fan and control panel! - Fan power: 3 kW (ATEX version) - Fan suction capacity: 16,000 m³/h (maximum 1,100 Pa) - Lighting: 2 × 36 W, ATEX certified - Power supply: 400 V, 3-phase Frequency inverter: for seamless fan speed control via potentiometer on the control panel. Filtration: three-stage system Certification and documentation: CE, EX / ATEX, complete technical documentation Ndodpjia Tauefx Ahcob Warranty: according to standard (12 months) !!! Machines can be ordered in various custom configurations and dimensions !!! Do not hesitate to contact us.

Būklė: naudotas, Gamybos metai: 2014, Für Anfragen: Zoltán Utasi +36 30 205 7380 • Motorisierte Druckbalkenverstellung • Elektronischer stufenloser Vorschubantrieb 400 V / 50 Hz, 2,2 kW • „Steuerung PPC 221 – mit 8,4'' VGA-Farbanzeige“ Hochleistungssteuerung für äußerst einfache Bedienung • Vorfräsaggregat 1802, 400 V (2 x 2,0 kW, 200 Hz, 12.000 U/min) mit 2 Fräsaggregaten zum Vorfräsen der Plattenkante • Fräser, Diamant, Ø 70 x 64 x 30 mm, Z2, Linkslauf Für Vorfräsaggregat 1801 / 1802 • Fräser, Diamant, Ø 70 x 64 x 30 mm, Z2, Rechtslauf Für Vorfräsaggregat 1801 / 1802 Ndodex Huhcspfx Ahcob • Kantenmagazin 1903 SYNCHRO automatischer Transport von Rollen- und Streifenmaterial • Leimauftragseinheit Glu Jet GJ301 automatisch (2,3 kW, 50 Hz) • Druckeinheit 1913 pneumatisch erste Walze angetrieben, 2 zusätzliche Druckrollen mit pneumatischer Einzelverstellung • Ablängaggregat 1918 (60 mm) pneumatisch (2 x 0,45 kW, 12.000 U/min) pneumatisch schwenkbar 0/10° • Multifunktionsfräsaggregat 1827 pneumatisch (2 x 0,65 kW, 200 Hz, 12.000 U/min) • Vertikale Tastrollen manuell manuelle Verstellung der vertikalen Tastrolle um 0,1 mm zum Fräsen des Kantenüberstands, z.B. bei Kunststoffkanten • Fräser, Diamant Ø 56 / 60 mm, Z = 2, R = 2,0 mm, Linkslauf Diamantbestücktes Vollhartmetallwerkzeug mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Fräser, Diamant Ø 56 / 60 mm, Z = 2, R = 2,0 mm, Rechtslauf Diamantbestücktes Vollhartmetallwerkzeug mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, patentiertes ProLock-E • Eckenrundungsaggregat 1832 (1 x 0,35 kW, 200 Hz, 12.000 U/min), für Kantenstärken bis 3 mm • Fräser, Diamant Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, mit CM-Technologie (LEUCO-System) und integrierter Späneabsaugung, für Profilaggregat 1832 • Ziehmesseraggregat 1929 pneumatisch inklusive pneumatischer Verstellung (getrennt für oben und unten) • HW-Wendemesser für Ziehmesserhalter 1929 / 1927 R = 2,0 mm (2 Stück erforderlich) • Flachziehmesseraggregat 1964 Entfernen von Leimresten für eine saubere Leimfuge. • Polieraggregat 1940 (2 x 0,12 kW, 50 Hz, 1400 U/min) Für Endreinigung und Hochglanzpolitur der Kante. Mit 2 Textilscheiben, Schwenkbereich 0–5°