Briaunų apklijavimo mašina

Hebrock F4

Būklė: labai geros būklės (naudotas), Hebrock F4 kantavimo staklės Gerai sukomplektuota, galima patikrinti prieš perkant Pradiniai frezai Klijų užnešimas voleliu, Išimamas bakelis antras bakelis komplekte Pneumatinė pirmoji giljotina Prispaudimo volai Galutinis pjūklas Frezavimo agregatas viršus-apačia, R1 – R2 Profilinė ciklina Kampų apdirbimo agregatas Pneumatinė plokščioji ciklina Max detalės aukštis 50 mm Max briaunos storis rulone 3 mm Padavimo greitis 7 m/min Min. detalės ilgis 160 mm Njdpfx Aoy N Ulgofxewg Įšilus per ~5 min Labai tvarkinga, pilnai veikianti

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis Nwjdelht Hzspfx Afxeg F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Būklė: beveik kaip naujas (naudotas), Kantavimo staklės Hebrock F4 Gerai įrengta, galima patikrinti prieš perkant, Pastaba: Mašiną galima apžiūrėti ir išbandyti nuo gegužės 11 d. Išankstinių frezų mazgas, Klijų uždėjimas voleliu, Yra klijų išleidimas, Klijų rezervuaras keičiamas, Pneumatinė išankstinė giljotina, Prispaudimo voleliai, Galutinis pjovimo diskas, Frezavimo agregatas viršus-apačia, R1 – R2, Profilių skutiklis R1-R2, Keičiamas kampų apdirbimo agregatas 1mm ir 2mm, Plokščias skutiklis, Nesting funkcija, 3 taškų pneumatinis reguliavimas, LED apšvietimas, Nedpfx Afoy Dcmusxewg Maksimalus briaunos ritinio storis – 3 mm, Padavimo greitis – 7 ir 10 m/min, Elektros poreikis – 7,08 kW, Staklės beveik naujos, ekspozicinės.

Būklė: naujas, Gamybos metai: 2025, Hebrock F 4 For complete processing of your panels For those who don't do things by halves. With the F 4, we offer you a model that allows you to produce fully finished edges in just 4 m of machine length. The F 4 is not just space-saving – it is also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm PLC control via 10" touchscreen Top-mounted quick heating glue pot (maintenance-free) Support disc for edge material Automatic central lubrication (cut-off saw, corner milling unit) Optical indicator for workpiece sequence Outrigger (extendable to the front) Quick-change glue pot preparation including glue change device, suitable for PUR processing Surface scraper with dual sensor system Pneumatic trim shear (scissor-type design, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed, special chain plates Joiner Milling unit Cut-off saw Corner milling unit Accessories: Njdpehqadcofx Afxjwg F4/09 radius scraper (incl. pneumatic lift-out) F4/09/4 multi radius scraper (R1/R2) F4/30 pneumatic 3-point adjustment Location: From stock 54634 Bitburg – available at short notice –

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, Įranga: drožlių transporteris, sūkių greitis be galo kintamas, DMG-MORI DMU 60 EVO linear, 2014 m. X/Y/Z eiga: 600 mm x 500 mm x 500 mm Pagrindinis velenas SK40 su 18 000 aps./min. NC pasukamas-sveriamas stalas, B ir C ašys Įrankių sandėlis su 60 vietų Šilumokaitis velenui ir stalui Dynamic paketas Siemens 840 D SL valdymas su Shop-Mill Infraraudonųjų spindulių matavimo zondas Heidenhain TS 649 Nwjdpfx Aexvhrwsfxeg Blum lazerinis įrankio matavimas Grandininis transporter, IKZ su popieriniu juostiniu filtru ir 80 bar slėgiu Alyvos rūko-emulsijos separatoriaus Programuojamos aušinimo skysčio purkštukai Elektrinis rankenėlė, darbo režimas 4 Staklių tekinimo ir frezavimo ciklas

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 50 mm, briaunos storis (maks.): 3 mm, darbinis slėgis: 7 juosta, reikalingas aukštis: 1 400 mm, vietos reikalavimas ilgis: 4 050 mm, reikalingas plotis: 1 300 mm, darbinio aukščio: 900 mm, with PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm: jointing cutter (including DIA tool), up to 2 mm cutting depth (max. 1 mm for special materials such as multiplex plywood), maintenance-free glue pot with quick-change system including glue discharge device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and indexable insert cutter (combination design), corner rounding cutter, surface scraper (including pneumatic lift), robust chain drive, ball-bearing mounted double roller upper pressure system, inspection window on the rear of the machine, extendable workpiece support, feed speed approx. 10 m/min. Nwedjx E N Nfspfx Afxeg Complete with quick-change system for corner rounding cutter, radius scraper (including pneumatic lift), chassis. F 4 – Technical Data Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m/min Ready for operation: approx. 3.5 min Max. connected load: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Būklė: naudotas, Gamybos metai: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Unit including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station radius R 2.5 mm. Technical Description: - Application of hotmelt adhesive to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit Njdpfx Aex S Hmzsfxewg - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable insert cutters (combination version), fine adjustment of the cutter from the operator side - Free slots for additional processing aggregates (Hebrock System) - Feed rate approx. 10 m/min - Cutting depth adjustment for the crosscut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate viewing windows from the rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on equipment) - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic including cooling and antistatic spray device (built 2014) - 1 pc. hot air unit for producing optical zero joint when using the appropriate edge materials - Incl. pneumatic glue pot positioning - Incl. cooling and antistatic spray device - Incl. 2 additional quick-change edge channels - Incl. special corner rounding trimming unit, max. workpiece thickness 60 mm, min. workpiece length 200 mm - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible – extra costs upon request - Technical data: max. panel thickness 40 mm, edge thickness 1.2 – 2.0 mm, 7 – 10 m/min feed speed, air consumption approx. 280 – 580 l/min (Airtronic only), electronically controlled, ready for operation after approx. 2 min Upgrade to 8 mm edge thickness: - 1 pc for max. workpiece thickness 40 mm - Incl. pneumatic saw adjustment, special version for min. workpiece thickness 8 mm - 1 pc 3-point pneumatic milling adjustment - 1 pc switching for radius – chamfer – flush for the combination milling stations, eliminating manual adjustment for the third stop position (PLC control required) - Buffing station (polishing wheel) 1 pc - Corner rounding trimming unit 1 pc incl. combination tool and pneumatic setting for chamfer/radius, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 pc incl. pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 pc with pneumatic engagement control - Complete chassis 1 pc - Glue station change system incl. glue discharge device downward (preparation) 1 pc; without second glue pot – includes the ability to process PU adhesives - Groove saw unit vertical in the panel 1 pc incl. pneumatic lifting device, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm - Special version groove saw motor with higher power - Extraction unit for jointing aggregate (internal) 1 pc at the machine's extraction manifold - Ball bearing for corner rounding cutter 24.1 mm 1 pc - Ball bearing for corner rounding cutter 24.2 mm 1 pc - Protective agent spray device 1 pc for edge surfaces on sensitive edge materials - Combined spray device for panel (separating and cleaning agent spraying) Location: Supplier’s stock

Būklė: geras (naudotas), Gamybos metai: 2000, darbinis plotis: 900 mm, bendras plotis: 1 800 mm, bendras ilgis: 12 000 mm, bendras aukštis: 3 550 mm, bendras svoris: 8 000 kg, Parduodama: Konig kombinuota duonos linija, 8/7/6/4 eilutės Komplekte: - Piltuvas TRO 240 su alyvos sistema - Galvos mašina Konig Industrie Rex Model A - Išsklaidymo juostos - Kildinimo spinta modelis: KGV V L Tipas: (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Spaudimo mazgas Nwsdpfoxnb Iisx Afxjg - Ilgeriedė - Sėklų stotelė - Nukritimo stalai (8/7/6/4) (4 skirtingi stalai su įvairiomis juostomis įtraukti) - Stalų laikymo vežimėlis - Miltų barstytojų laikymo vežimėlis - Atsarginės dalys - Valdymo spinta - Visi dokumentai ir elektros schemos Porcijos diapazonas: nuo 20–30 gramų iki 110 gramų Našumas: 18 000 / 24 000 vnt./val. Darbo plotis: 900 mm Naujas būgnas Industrie Rex Daug atsarginių dalių, tokių kaip išsklaidymo juostos ir kt. Liniją galima apžiūrėti vietoje. Galime atsargiai pakrauti liniją į sunkvežimį ar konteinerį. Turite klausimų ar pastabų? Prašome kreiptis. Pagarbiai, Leo Holland

Būklė: naujas, Gamybos metai: 2025, Exhibition machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest free-form nesting software - Uninterruptible power supply (UPS, ZB27) - Touchtool tool length measurement - 10.3 kW milling spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Fields A + D in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, single-tool unit magazine swiveling in X and Y directions for Clamex unit - 2 x 140 m³/h and 1 x 250 m³/h vacuum pumps, dry-running, 400 V - 16-circuit vacuum system (VF16), software-controlled, incl. additional 25 meters of sealing cord - Laser pointer – red (one laser pointer) Field D (ZB8) for positioning vacuum cups and defining the workpiece contour - Automatic central lubrication - Vacuum cups for smooth table surfaces, complete, 140x115 mm, height 30 mm, with connection hose - Thin panel pusher as an addition to the pusher for special material under 4 mm thickness and standard wood-based panels under 2 mm - Conveyor belt, complete push-off conveyor belt, push-off table - TouchLabel PRO – touchscreen and label printer mounted on stand Nwjdexc Rmkjpfx Afxsg - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the push-off conveyor belt - Availability: by arrangement - Location: Flörsheim

Būklė: geras (naudotas), Medienos smulkintuvas parduodamas Paruoštas transporterio juostai Idealiai tinka likutinės (visų rūšių minkštos medienos) ir padėklų smulkinimui Įskaitant hidraulinį stūmiklį Nwsdpfjxbyx Tsx Afxog Variklis: 7,5 kW Rotoriaus plotis: apie 82 cm Svoris: 1 460 kilogramų Pilna apkrovos srovė: 32 A Pagrindinis saugiklis: 35 A