Fp1 pirkti naudotą (156)

Sąlyga: labai geros būklės (naudotas), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic polymer to rectangular glass panes as part of a production line for solar modules. The polymer forms a seal to a second glass pane, which is applied in a later process step. Feeding, application, and removal of the panes is carried out on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process base materials (glass, sealant) that comply with the specifications found on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values - Maximum conveyor speed: 18 m/min - Height of glass running surface: 1100 mm - Height of applied sealant bead: 0.5 to 1.2 mm - Maximum width of applied sealant bead: 12.0 mm - Required constant inlet pneumatic pressure: 6.5 to 8.0 bar - Operating pneumatic pressure: 6.0 bar - Compressed air consumption, normal operation: 10 Nl/min - Compressed air consumption during drum change: 500 Nl/min - Average energy consumption per hour: 10 kWh - Working temperature of sealant: 110°C to 130°C Ambient Conditions and Emissions - Minimum ambient temperature: +15°C - Maximum ambient temperature: +35°C - Maximum relative humidity: 75% - Sound level: < 70 dB (A) Requirements for Sealant Drums Specification: - Material/lid container D18 according to DIN 6644 – with foot (F1) and smooth external surface (smooth shell design). - Capacity: 216 liters - Internal diameter: 571.5 mm - Height: 874 mm - Minimum wall thickness: 1.25 mm Processable Glass Panes Glass Types: - Glass panes with smooth surfaces (float glass) can be processed. Dimensions and Weights Minimum Dimensions Maximum Dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Processable materials are thermoplastic polymers based on polyisobutylene (butyl). The material must have a defined viscosity curve and be capable of flowing at approx. 110°C to 130°C. Only use materials that have proven themselves in practice and are approved by the manufacturers of these materials and Bystronic for your intended application. Ihedpfx Asd N Erpef Iot Detailed product descriptions and information on handling, storage, and disposal of the polymer used can be found in the information sheets and safety data sheets provided by the polymer manufacturers. Dimensions – Gantry Robot with Glass Conveyor - Height x Width x Depth: 2800 x 1890 x 2735 mm - Weight of gantry robot: 850 kg - Weight of glass conveyor: 1400 kg Dimensions – Drum Pumps - Height x Width x Depth: 3320 x 1060 x 1200 mm - Weight (without drum): 850 kg - Weight (with drum): 1100 kg - Height H at drum pump FP1: 4400 mm - Height H at drum pump FP2: 4000 mm Dimensions – Control Cabinet - Height x Width x Depth: 2200 x 1800 x 600 mm - Weight: 450 kg The applicator has been used with butyl material. Condition: used From test laboratory, like new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Ref: 11032 . 2018 MBO K8-RS.6/SKTL Neuestes Modell, 16-Seiten-Highspeed-Kombifalzmaschine Ausstattung: FP130 Palettenanleger als Flachstapelanleger mit 'Vaculift' und 120 cm Stapelhöhe. ‘M1 Advanced’ intuitives Bedienerführungssystem mit verstellbarem 15,6” Touchscreen RAS (Remote Maintenance Software) & Bogenverfolgung Datamanager 4.0 Softwarepaket für die Produktionsplanung Automatische Verstellung der Kombiplatten mit Deflektoren Ijdpfx Aexx Uxvef Ijht Automatische Verstellung der Falzwalzen Schlitzwellen-Kassette für schnellen Rüstwechsel Bogenanschlag im Kreuzbruch kann als Makulaturauswurf während laufender Produktion genutzt werden Gesamt- und Chargenzähler Schallschutzhauben mit Sichtfenstern Palamides Alpha 500 Plus Pressstapelauslage Inklusive integrierter Kompressoren, Werkzeuge & Handbücher. Falzkonfiguration: 6 Parallelfalztaschen im ersten Werk mit Schlitz-/Rillwellen 1. Messer bei 90° mit Schlitz-/Rillwelle & Einbruchfalztasche zur Seite 2. Messer links vom ersten Messer. Technische Daten: Bogenformat max.: 80 x 120 cm Min.: 15 x 25 cm Parallelfalz Min.: 15 x 20 cm Kreuzbruchfalz Min.: 20 x 30 cm Dreibruchfalz Bogenstärke: 35 – 250g Mechanische Geschwindigkeit: 230 m/min

Sąlyga: naudotas, Slotting head, slotting attachment suitable for DECKEL milling machine type FP 2 Serial no.: 2211 / 1895 Dovetail width: approx. 76 - 88 mm Iodpfowbi Rbjx Af Isht Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail front edge to gear center: approx. 235 mm Stroke length: max. 80 mm Strokes per minute: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke length adjustable via eccentric adjustment - Driven by the machine's gearbox, within the dovetail guide (same as a standard vertical head) - This slotting attachment is inserted into the dovetail guide in place of the standard vertical milling head (mounting in place of vertical head, milling head) - Drive gear in slotting head: 39 teeth, gear width 16 mm, presumed 20° pressure angle - Slotting head rotatable 360° on flange plate, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a 15° pressure angle on the drive gear DECKEL FP2 + FP3 have a 20° pressure angle on the drive gear

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2020, veikimo valandos: 10 h, Compact precision mini rotary table, suitable for single-part or small batch production in laser welding and precision engineering. Both horizontal and vertical setups are possible. - Made in Germany - It is particularly suitable as a 4th axis for engraving and milling machines for engraving, laser processing, drilling, slotting, keyway milling, or for use on a tool or surface grinding machine. Precision worm gear drive with a reduction ratio of 50:1. The worm and worm wheel are manufactured in-house, ensuring the highest adjustment precision. The gear set is fourfold ball bearing mounted and backlash-free but can be adjusted if necessary. The robust output spindle is equipped with a faceplate with a diameter of 108 mm, internal taper MK1, and a through-hole of 10.5 mm (optionally with M12 internal thread). The electronic control is provided as a handy module with a foot switch for clockwise/counterclockwise operation, including power supply and emergency stop. Rotation speed can be set from 0–50 rpm according to the scale. Speed changes are immediate while the axis is rotating. The direction is selected with the foot switch: the right switch rotates the axis to the right, the left switch to the left. Pressing the foot switch accelerates the axis to the set speed; releasing the switch decelerates the axis. Ideal for laser welding applications on Hermle, Trumpf, Haas, Maho, Deckel FP1, G1, or Gravograph machines. We offer standard clamping devices for your applications. Special clamping fixtures can also be manufactured quickly and cost-effectively. Special accessories: #600010 3-jaw chuck 80 mm: €125 #600011 3-jaw chuck 100 mm (with 1 adapter plate, height increase to 80 mm): €300 #600021 Tailstock, height adjustable 60 mm: €125 #600030 Adapter for ER16 collet with nut: €125 Ihodeb Nbpwjpfx Af Iot Technical data: Total height: - vertical setup: 145 mm - horizontal setup: 70 mm Center height: 60 mm Faceplate diameter: 108 mm, maximum axial runout 0.020 mm Locating flange diameter: 55 h7 mm, maximum radial runout 0.020 mm Morse taper MK1 with 10.5 mm through-hole, maximum runout 0.020 mm Lightweight: 5 kg, load capacity: 20 kg workpiece weight Each with four mounting holes, 7 mm diameter, spaced 150 mm apart Comes with 6 months warranty - Worldwide, 800 rotary axis systems sold since 2006 -

Sąlyga: naudotas, rida: 62 506 km, galia: 117 kW (159,08 AG), pirmoji registracija: 09/1971, kuro tipas: dyzelinas, tuščias svoris: 8 020 kg, didžiausias leistinas svoris: 3 580 kg, bendras svoris: 11 600 kg, padangos dydis: 8,25-20 PR 12, ašių konfigūracija: 4x2, ratų bazė: 4 200 mm, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: mechaninis, pakaba: plienas, sėdimų vietų skaičius: 6, bendras ilgis: 2 450 mm, bendras plotis: 2 650 mm,

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Compact precision CNC rotary table, suitable for single-part or small-series production in precision engineering. Both horizontal and vertical installation are possible. You cannot buy better quality! - Made in Germany - It is ideal as a 4th axis on engraving and milling machines for engraving, laser marking, drilling, keyway cutting, milling, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any division, or 3D machining operations are all possible. Precision worm gear with a reduction ratio of 100:1. Output torque well above 25 Nm. Drive is provided by a controlled stepper motor with 1.8-degree steps, 3.2A, and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest adjustment precision. The pair is mounted on four ball bearings, backlash-free, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate d=108 mm with internal Morse taper 1 and a through hole of 10.3 mm (optional M12 internal thread). The electronic control unit, a handy module with 14 travel programs and 2 reference moves as well as step monitoring and power supply, is included in the package. Optimized pre-programming with 360 (for milling), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, and 0.02-degree incremental cycles. CW and CCW rotation, cycle pauses, and more are freely programmable. With the software you can: - Create travel programs and cycles - Set absolute or incremental movement values - Check the actual position of the rotary axis at any time via software - Receive start impulses from your NC machine via output Complex divisions, cross-drillings, or gears can be produced quickly. Additionally, with a start signal, you can now execute multiple different rotation angles in sequence—e.g. incrementally 30°, then 3°, then 90°, then 1.45°, with or without pauses, or return in reverse. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 operating steps, as well as start and reference commands, can now be externally controlled by your NC controller through M-functions. Optional: Sealing air with splash guard. We can offer standard clamping devices for your applications, and we can also manufacture custom clamping fixtures quickly and cost-effectively. Special accessories: - 3-jaw chuck 80 mm: 125 Euro - #600011 3-jaw chuck 100 mm, bore 25 mm, with adapter plate (center height increased to 80 mm): 300 Euro - #600021 Tailstock, height adjustable 60–80 mm: 150 Euro - #600030 Mount for ER 25 collet chuck with nut: 125 Euro - #600031 USB data cable for PC programming: 150 Euro - #600032 Programming of your travel angles: 40 Euro - #600033 Measuring travel program & final inspection test report: 100 Euro - #600036 ER 25 collet set up to D16 mm, 10 pcs: 125 Euro Ijdpfxed Erdre Af Isht - #600037 Mount for ER 32 collet chuck with nut up to D20: 125 Euro - #600097 Control cable with magnetic switch (reed contact) for automation without NC machine output: 25 Euro - #600099 Acceptance/program/aluminium case/software setup: 80 Euro