Fp1 pirkti naudotą (147)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and infinitely variable feed on 3 axes – Excellent condition Technical Data: >> Year of manufacture: 1985 >> Machine no.: 2102-2867 >> Swiveling-tilting rotary table (newly ground) >> Spindle speeds: 40 – 2000 rpm >> Infinitely variable feed in 3 axes Fsdpfx Ahst Aarpowepd >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 taper >> Clamping system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed, with manufacturer’s warranty and operation manual. Display functions: set reference and zero points, enter coordinates, mm/inch switch, absolute or incremental mode, circle functions, hole patterns, radius milling functions, etc. >> Coolant device >> Operator’s manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in excellent condition. The machine has minimal backlash and all axes move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, plus there is rapid traverse in all axes. Oil change has been performed. Mechanically and electrically inspected. The new digital readout by K&C makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780, like new condition!! Technical data: >> Machine No.: 2101-51084, year 2011 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes Fpedpfx Aswpi Dqshwjd >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic machine vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the machine: Offered is a universal milling machine Deckel FP1 repowered by FPS in like-new condition. Included in the accessories are the hydraulic machine vice with swivel base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. You have the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and Horizontal Quill - ISO 40 taper >> Spindle Brake >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant device >> Machine leveling feet Fpjdpfevb Ud Uex Ahwsd About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes Fjdsu Racrspfx Ahwjpd >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes Fpsdsu T D Nrepfx Ahwjd >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system Fpsdpfx Ahsu Nvwvewed >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 repowered by FPS, Year of Manufacture 2010 with 3-axis Digital Readout Heidenhain ND 780, As New Condition! Technical Data: >> Machine No. 55249/08, Year 2010 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Drive Power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical Quill SK40 and Horizontal Quill SK40 >> Drawbar System S20x2 >> Weight approx. 700 kg Fpsdpfx Aexu Hbhehwsd Accessories and Equipment: >> 3-axis Digital Readout Heidenhain ND 780 >> Hydraulic Vice >> Collets >> Tool Holders >> Cutters >> Operating Manual >> Coolant System About the Machine: Offered is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. The accessories include hydraulic vice with swivel base, collet tool holder, and cutters. Mechanically and electrically tested. The Heidenhain digital readout ensures easier and more precise operation. Take advantage of the opportunity to view and test the Deckel under power on site. The machine is available immediately.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power. Fpedpfx Aju R D I Sehwod

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the spindle head >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: Fjdpoxu E R Iofx Ahwepd >> 3-axis digital readout Heidenhain TNC113 >> Centralized electrical lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed rate is steplessly adjustable on all three axes and each axis is also equipped with rapid traverse. The active 3-axis digital readout from Heidenhain is a significant advantage. Thanks to this Heidenhain positioning control, you can enter dimensions which the machine automatically moves to. The FP1 was previously located in a training workshop and only occasionally used. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this premium machine under power at our premises. The machine is available immediately.

Gamybos metai: 1981, būklė: geras (naudotas), Deckel FP1 2-axis universal milling machine with Heidenhain digital readout and tilting table. SK 40 spindle taper. Good, fully operational condition. Machine can be demonstrated under power by appointment. Fpjdpfxehg Embj Ahwed

Gamybos metai: 1980, būklė: geras (naudotas), Deckel FP1 Aktiv milling machine with 3 axes Heidenhain digital readout, tilting table. SK 40 spindle taper. Good, ready-to-operate condition and can be demonstrated under power by appointment. Fjdpfx Ahod Id N Rswepd

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, For sale is a partially refurbished Deckel FP1 milling machine with 3-axis Heidenhain TNC113 active control, notable for its user-friendly operation. This newer model, manufactured in 1989, features central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary/swivel tilting table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Fodpfspy Eldox Ahwjpd Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering. - All machines undergo thorough inspection. - All lubricants and, if necessary, worn parts are replaced beforehand. - On request, we can provide a complete or partial overhaul of the selected machine. - You can order additional accessories such as tools, etc., directly with your purchase. - On request, additional features such as safety equipment can be supplied and installed. - We are happy to arrange shipping and/or machine installation for you.

Būklė: geras (naudotas), Sandėlio numeris: 3010 Gamintojas: Deckel Staklių numeris: 31488 Tipas / modelis: FP 1 Ėjimo atstumai x-y-z: 300 - 150 - 340 mm Stalas: 600 x 200 mm Apsisukimų diapazonas: 40 iki 2 000 sūk./min Veleno tvirtinimas: MK 40 Padavimai: 16 – 500 mm/min Jungtis: 1 / 1,5 kW Fpjdpfx Ahow D N Thowjd Priedai/komplektacija: Elesta skaitmeninis indikatorius Būklė: gera Svoris: 0,8 t Matmenys: 800 x 1 000 x 1 800 mm

Būklė: geras (naudotas), Gamybos metai: 1980, mašinos/transporto priemonės numeris: 4038, X ašies eiga: 290 mm, Y ašies eiga: 150 mm, Z ašies eigos atstumas: 330 mm, tvirtinimo skersmuo: 40 mm, stalo ilgis: 600 mm, stalo plotis: 210 mm, sukimosi greitis (maks.): 2 000 aps./min, sukimosi greitis (min.): 40 aps./min, bendras svoris: 700 kg, CONDITION & REMARKS: - This is an actively controlled tool milling machine Fpsdpfowxpxmex Ahwsd

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed – very good condition – CE compliant Technical Data: • Year of manufacture: 1992, Machine No. 2102-6209 • Rigid angle table (newly planed) • Spindle speed: 40 - 2000 rpm • Stepless feed in 3 axes • Rapid traverse in 3 axes • Drive power: 1.5 / 1.9 kW • Spindle brake • Travel distances X/Y/Z: 300 / 160 / 340 mm • Vertical milling head can be shifted 100 mm on spindle carrier • Vertical and horizontal quill – SK40 • Drawbar system M16 • Weight approx. 800 kg Accessories and Equipment: • 3-axis digital display Heidenhain TNC113 • Coolant system • Machine lamp • Operating manual, spare parts list About the Machine: For sale is a Deckel FP1 universal milling machine, CE compliant and in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, which makes transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine also features rapid traverse on these axes. An important advantage is the active 3-axis digital display. With this Heidenhain distance controller, you can enter dimensions that the machine will move to automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site. Fpedpexdi Ivofx Ahwsd

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: Very good Control type: Conventional Control system: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Fpsdpfxexnnias Ahwod Tool holder: SK40 Spindle speed: 40-2000 rpm Control system: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirement (LxWxH): approx. 1200x1100x1600 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 340 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, Dear Sir or Madam, We are offering a Deckel FP1 3-axis milling machine (active), equipped with retrofitted safety features. These newer models are fitted with central lubrication, an electric coolant pump, and a brake motor. The control cabinet can be quickly disconnected from the machine thanks to a Harting connector. The safety components are also connected to the cabinet using this connector type, ensuring ease of handling is not compromised. You receive a 12-month warranty on the retrofitted safety devices, which we can offer for any machine type! The electronic spindle guard is adjustable in multiple axes and is designed to prevent access to the work spindle as well as hazards from flying chips, coolant, etc. The electronic spindle safety hood prevents access to the rotating spindle stub and the tool clamping mechanism. Delivery time: On request Year of manufacture: 1989–1992 Machine no.: 2102-xxxx Table: Fixed angle table Travel distances: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Power supply: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Fpodpfouw Uu Njx Ahwjd Feed: Infinitely variable, 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine mounts, electronic spindle guard, electronic spindle safety hood Our service promise to you: - We are a certified master engineering company - All machines are thoroughly inspected - All lubricants and, where necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul your selected machine - On request, you can order additional accessories such as tools directly - On request, we can install other accessories such as safety devices - We are happy to handle shipping and/or bring-in logistics for you

Būklė: naudotas, mašinos/transporto priemonės numeris: 28670, X-travel: approx. 400 mm y-travel: 150 mm z-travel: 340 mm Clamping surface: 600 x 210 mm Fjdpfx Ahecxxliswepd T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed range - vertical: 60 - 1200 rpm Speed range - horizontal: 95 - 1900 rpm Spindle speed steps: 12 Feed range: 10 - 500 mm/min Feed steps: 10 Spindle taper: MT 4 Vertical quill stroke: 60 mm Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.9 x 1.05 x 1.55 m

Būklė: naudotas, mašinos/transporto priemonės numeris: 52326/08, x-axis travel: 250 mm y-axis travel: 150 mm z-axis travel: 305 mm Table clamping surface: 600 x 210 mm Spindle speed range: 40 - 2000 rpm Number of spindle speeds: 16 Spindle taper: SK 40 Feed rate: 10 - 500 mm/min Number of feed rates: 16 Swiveling vertical head: +/- 90 degrees Total power requirement: 1.0 / 1.4 kW Machine weight approx.: 0.8 t Space requirements approx.: 1.0 x 1.25 x 0.85 m Universal tool milling machine type Deckel FP1 with: - Swiveling vertical spindle, - Vertical head swivels +/- 90°, - SK40 spindle taper, Fpsdpscxxrvefx Ahwod - Automatic feeds, - Two-speed (pole-changing) motor, and - Separate control cabinet with main switch.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 160 mm, padavimo ilgis Z ašis: 320 mm, bendras svoris: 860 kg, Universal Tool Milling Machine Ruhla Type 58 Thiel Duplex 58 Comparable to Deckel FP1 Compact machine with boring quill and automatic feed on all 3 axes including vice New digital readout included with 1 measuring scale Swiveling table ±0–30° Table size 715 x 260mm X-axis: 300mm Fedpswf Agdofx Ahwepd Y-axis: 160mm Z-axis: 320mm Dimensions (LxWxH) approx. 110 x 110 x 170cm Inspection and testing are welcome.

Būklė: geras (naudotas), Deckel FP1 milling machine, manufactured in Germany by Friedrich Deckel AG, Munich. The machine is fully operational and in good working condition. For further information, please do not hesitate to contact us. Fodpfx Aow Amaishwspd

Būklė: dilaminuotas dirbtuvėje (naudotas), Universal Tool Milling Machine Deckel FP1: Fsdohv H Spspfx Ahwspd Technical specifications: - Travel X-axis: approx. 300 mm - Travel Y-axis: approx. 150 mm - Travel Z-axis: approx. 340 mm - Swivelling angle table - Clamping surface: 260 x 600 mm - T-slots: 5 - T-slot width: 12 mm - Spindle speed range: 20 - 2000 rpm - Speed range – vertical: 60 - 1200 rpm - Speed range – horizontal: 95 - 1900 rpm - Spindle speed steps: 12 - Feed range: 10 - 500 mm/min - Feed steps: 10 - Spindle taper: MK 4 - Vertical quill stroke: 60 mm - Total connected load: 1.7 kW - Machine weight approx.: 0.8 t - Required space approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: - Complete renewal of the electrics (by a professional, with wiring diagram!) - Cleaning - Polishing of all bare metal surfaces - Repainting - Replacement of various signs - Replacement of all standard parts (screws, handles, levers, handwheels, oil sight glasses, etc.) - Bearing and sealing of the upper gearbox shaft - Sealing of the coolant pump - Conversion of feed axes to safety handwheels - New installation of coolant lines - Adjustment of gibs and axis clamps On request, the machine can be fitted with glass scales on all axes. The machine can be inspected and tested by appointment. We are also happy to offer machine transport and various accessories.

Būklė: naudotas, Gamybos metai: 1982, x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Infinitely variable feeds: 5–500 mm/min Rapid traverse: 1200 mm/min Spindle speeds: 40–2000 rpm Tool holder: Standard taper 40 Table length: 600 mm Table width: 120 mm Operating voltage: 380 V Frequency: 50 Hz Rated current: 13 A Machine weight: approx. 0.75 t Space requirement: approx. 1.8 x 1.5 x 1.8 m DESCRIPTION Machine includes: Fpsdpfjvvnfusx Ahwsd Active three-axis digital readout HEIDENHAIN Documentation Accessories Vice etc.

Būklė: naudotas, Universali įrankinė frezavimo staklė DECKEL tipas FP 1 Staklių nr. 51265 Pagaminimo metai apie 1967 Važiavimo eiga X: 300 mm Y: 150 mm Z: 340 mm Stalo matmenys 600 x 200 mm Veleno laikiklis SK 40 - S20 x 2 Veleno apsukos 40–2000 aps./min., 16 pakopų Variklio galia 1,0 ir 1,6 kW, poliarumo perjungimas Maitinimas 380 V, 50 Hz - Pavaros X ir Z ašyse - Veleno apsukos valdoma per 2 variklio greičius ir 8 pavarų pakopas Fodpfx Aoghtvashwepd - Vertikaliosios galvos pinolės eiga 60 mm - Pasukamas, vartomas ir palenkiamas kampinis stalas - Aušinimo skysčio siurblys sumontuotas mašinos pagrinde - Atskiras valdymo skydas šalia Reikalinga erdvė (I x P x A): 1100 x 1100 x 1600 mm Svoris: 690 kg Gera būklė

Būklė: naudotas, Gamybos metai: 1969, Veleno skersmuo: 150 mm X eiga: 7200 mm Y eiga: 3800 mm Plokštės laukas: 9000x6000 mm AEG skaitmeninis indikatorius Atraminė mova: skersmuo 440 mm Atraminė mova: horizontalus judėjimas 1000 mm Veleno eiga: 1500 mm Plokštės laukas yra pasirinktinai ir apskaičiuojamas atskirai. Techniniai duomenys pateikti gamintojo arba eksploatuotojo, todėl mums nėra įpareigojantys. Pasiliekame teisę parduoti tarpiniu laikotarpiu; galioja tik mūsų bendrosios pardavimo sąlygos. Apie mus: daugiau nei 400 nuosavų įrenginių sandėlyje daugiau nei 15 000 m² sandėliavimo plotas, kranų talpa iki 70 t daugiau nei 10 000 dirbtuvių priedų prekių Norite parduoti mašinas, gamybos linijas ar įmonę? Kreipkitės į mus. Daugiau pasiūlymų rasite mūsų interneto svetainėje. Fodpjyt R Absfx Ahwjpd Apžiūros galimos pagal susitarimą. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda