Frezavimo Mašina Lentelės pirkti naudotą (17 637)

Sąlyga: naudotas, Gamybos metai: 2020, x-travel: 1,800 mm y-travel: 700 mm z-travel: 700 mm Controller: Heidenhain TNC 640 Spindle speed: 20,000 rpm Spindle motor: 35 / 25 kW Torque: 130 / 86 Nm Tool holder: SK 40 Number of tool positions: 60 pcs. Table diameter: 750 mm Table load: 500 kg Rapid traverse (x/y/z): 80 m/min Acceleration (x/y/z): 8 m/s² Chip-to-chip time: 6.5 s Operating hours: approx. 21,460 h Spindle hours: approx. 12,928 h Machine weight: approx. 14,080 kg In our assessment, the machine is in good used condition and can be viewed under power by appointment. Technical features & accessories: Gkjdpex Hazbsfx Abmsf - NC swiveling milling head - Direct path measuring systems - Chip conveyor - Fixed table with integrated rotary table - ICS 40 bar - Rinsing pistol for chip washing - Oil and emulsion mist separator - Air blast through the spindle center - Infrared probe PP60 optical - MPC - Machine Protection Control - Electronic handwheel Accessories, illustrated tools, and clamping devices are only included in the delivery scope if specified in the additional information. Subject to change and error in the technical data and information, as well as prior sale!

Sąlyga: geras (naudotas), Gamybos metai: 1988, X ašies eiga: 1 000 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 600 mm, 5 ašių staklės Bežingsnis padavimas: 2-4000 Bendra reikalinga galia: 20 kW Staklių svoris apie: 7 t Reikalinga erdvė apie: 7 linijiniai metrai Gksdpjx Ehr Asfx Abmef

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Universalioji frezavimo staklė su štampavimo galva SHW Tipas UF 1 Pagaminimo metai 1970 Atnaujinta 2010 Stalas 700 x 310 mm Gsdox E Rq Dopfx Abmjkf Judėjimo eiga X/Y/Z 550/340/420 mm tvirtinimas SK 40 Veleno greičiai 46 – 2200 aps./min Pinolės eiga 80 mm Smūgio eiga 200 mm Pavaros 12 – 254 mm/min Svoris 2 t SK 40 tvirtinimai Hidraulinis veržtuvas Svoris 2 t Kaina: 2.500 EUR plius PVM, iš vietos.

Sąlyga: naudotas, Gamybos metai: 2018, x-travel 1,800 mm y-travel 700 mm z-travel 700 mm Control 840 D sl op. (CELOS) Siemens Spindle speed range - main spindle 20 - 20,000 rpm Drive power - main spindle 35 / 25 kW Max. torque 130 / 86 Nm Tool holder HSK-A63 Tiltable B-axis: +/- 100° Godpfx Aexr Racjbmekf Clamping surface of table 2,100 x 700 mm Max. table load (1,500) kg Number of T-slots 7 Table diameter 750 mm Max. rotary table load 500 kg Number of rotary table T-slots 7 T-slot pitch 63 mm Table height 255 mm Rotatable C-axis: 360° Rotation speed 16 rpm Resolution 0.001° Number of tool pockets 60 positions Tool holder HSK-A63 Max. tool weight 6.0 kg Max. tool diameter 80 mm Max. tool diameter with empty adjacent pocket 130 mm Max. tool length 300 mm Chip-to-chip time 7.6 sec Rapid traverse (X / Y / Z) 40 m/min Acceleration 4 m/s² Feed rate max. 40,000 mm/min Feed force (X / Y / Z) 8 kN Total power requirement 73 kVA Machine weight approx. 13.7 t Footprint approx. 7.5 x 6.5 x 3.0 m 5-axis CNC travelling column milling machine DMG MORI – DMF 180-7 - Motor spindle SpeedMaster - Swivel milling head (B-axis) - Rotary table integrated in fixed table - Internal coolant supply - Spindle, Y-axis, and B-axis clamping overhauled in 04/2025

Gamybos metai: 1986, Sąlyga: geras (naudotas), Universal milling machine Manufacturer: KUNZMANN Type: UF 6 / 3 Year: 1986 with Heidenhain digital readout Spindle mount: ISO 40 horizontal and vertical Spindle speeds: 50 - 2150 rpm Infinitely variable feeds: 0 - 1000 mm/min on X / Y axes Gksdpfxsich Dvo Abmsf and Z axis 0 - 250 mm/min Rapid traverse: 2000 mm/min on X / Y axes and 500 mm/min on Z axis Table size: 860 mm x 265 mm, swivels +/- 45 degrees Counter bearing, 2 arbors for horizontal milling included. Machine documentation available. Good condition. Ready for demonstration.

Sąlyga: naujas, X ašies eiga: 8 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 000 mm, frezos galvos padėtis: Universal-Diagonal-Fräskopf, greitas poslinkis X ašimi: 30 000 m/min, greitas poslinkis Y ašis: 30 000 m/min, greitasis eiga Z ašyje: 30 000 m/min, veleno greitis (maks.): 6 000 aps./min, pasukimo diapazonas: 1 °, stalo ilgis: 9 500 mm, stalo plotis: 1 100 mm, sukimo momentas: 1 178 Nm, stalo apkrova: 62 000 kg, aušinimo skysčio tiekimas: 36 juosta, ruošinio svoris (maks.): 62 000 kg, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, VISIŠKAI NAUJA KOLONOS TIPO FREZAVIMO STAKLĖ Gksdpfx Aom Tv D Aobmof

Sąlyga: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 7853, X ašies eiga: 5 000 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 2 000 mm, stalo ilgis: 6 000 mm, stalo plotis: 2 000 mm, stalo apkrova: 17 000 kg, Lovio tipo frezavimo staklės | FPT Sirio-M50 - Heidenhain valdymo sistema - 60 vietų įrankių keitiklis - Aušinimo skysčio paruošimo / filtravimo sistema - Drožlių transporteris - Šaldymo įrenginys, gamintojas Deerosdassi (Italija) - Elektros valdymo spinta - Įrenginio apsauginis gaubtas Gkjdpsxzzlhefx Abmef Apžiūra galima bet kuriuo metu iš anksto susitarus.

Sąlyga: geras (naudotas), Travel distances: 500x350x380 mm Table size: 790x360 mm Spindle mount: ISO40 Spindle speeds: 63–4000 rpm Gkedpfxeff R Slo Abmef Active digital display Various accessories included MARCELS MASCHINEN CH

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1989, Universalus horizontalaus – vertikalaus frezavimo staklės WMW Auerbach Tipas: FW 250 x 1000 / 2 Pagaminimo metai: 1989 Stalas: 1250 x 250 mm Stalo apkrova: 1250 kg Judėjimo eiga X/ Y/ Z: 700 / 400 / 500 mm Heidenhain 3 ašių skaitmeninis indikatorius SK 40 Veleno apsisukimai: 55 – 2800 aps/min Pado eiga: 10 – 630 mm/min be laipsnių Vertikalioji galva Horizontalioji frezavimo įranga Galia: 6,3 kW Gkedpex E Rqkefx Abmef Svoris: 2,5 t Kaina: 2.000 €—pridėjus PVM, iš sandėlio vietos.

Sąlyga: labai geros būklės (naudotas), kuro tipas: dyzelinas, spalva: geltonas, pirmoji registracija: 01/2018, Gamybos metai: 2018,

Sąlyga: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 450 mm, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 350 mm, 3 ašių skaitmeninis indikatorius Horizontali ir vertikali frezavimo galvutė Ištraukiamas pinolas Techniniai duomenys: Išilginis eigos kelias X – 450 mm Skersinis eigos kelias Y – 300 mm Vertikalus eigos kelias Z – 350 mm Stalo matmenys – 800 x 400 mm Veleno kūgis – SK40 Gkjdpfswyit Hjx Abmef Veleno apsukų diapazonas – 50–2500 aps./min Paduoda – 8–400 mm/min Variklio galia – 3,2 kW Mašinos svoris – 1500 kg Techniniai duomenys, priedai ir aprašymas nėra įpareigojantys.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, X ašies eiga: 16 000 mm, Y ašies eiga: 3 200 mm, Z ašies eigos atstumas: 1 500 mm, greitas poslinkis X ašimi: 15 000 m/min, greitas poslinkis Y ašis: 15 000 m/min, greitasis eiga Z ašyje: 15 000 m/min, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 20 aps./min, 100% Retrofit by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2002 Control system: Heidenhain TNC 640 / TNC 7 Travel paths: X-axis (mm): 16,000* (see below) Y-axis (mm): 3,200 Z-axis (mm): 1,500 Spindle speed range (rpm): 20 – 4,000 Feed rates X, Y & Z axes (mm/min): 2 - 12,000 Max. rapid traverse X, Y & Z axes (mm/min): 15,000 Milling head: Automatic orthogonal milling head H10, 1° indexing Tool holder: ISO 50, DIN 69871 AD Main spindle drive power: 100% ED KW 37 - Automatic tool changer with 60 magazine positions - Coolant system with 20 bar & (IKZ - internal coolant supply) Gkjdpjv S Upfjfx Abmjf - Chip conveyor with floor discharge - Ergonomic operator platform - Safety guarding for hazardous areas - 3D thermal expansion compensation - INA linear guides *Adaptive X-axis length: We supply the machine bed in the length you require, up to a maximum of 16,000 mm. 100% RetroFIT – our core business! For us, it means offering a machine that is truly comparable only to a new product, yet offers you many additional benefits: - Latest CNC control technology combined with proven machine stability - Significant CO₂ savings compared to a new machine - Shorter delivery times - Often savings on costly foundation work - Significantly lower investment costs All mechanical components (e.g. ball screws, guides, rolling bearings, etc.) have been renewed. Our engineers have designed the entire electrical peripheral system (including the latest drive, control, and regulation technology) with a focus on maximum efficiency. The retrofit includes new cabling, a completely new control cabinet, and the most modern Heidenhain control system with a wide range of innovative options. The completely new and innovative hydraulic concept meets the latest requirements and achieves the highest efficiency. Visually, thanks to our thorough refurbishment, the machine is in no way inferior to a new one: The entire machine has been stripped down to every last screw, ground, primed, and then coated with a robust 2K-EP paint. We have equipped the machine with a safety concept tailored individually to the operator’s needs, offering maximum safety, flexibility, and ergonomics. You receive a state-of-the-art machine, fully up to current technological standards, combined with significant CO₂ savings.

Sąlyga: naudotas, Gamybos metai: 1999, X travel: 12,000 mm Y travel: 3,600 mm Z travel: 1,500 mm Spindle speeds: 3,000 rpm Godpfx Absxwdygsmekf Control system: Heidenhain iTNC430 Milling head: 2 axes, indexed in 2.5° increments Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7:231:3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Sąlyga: naudotas, Gamybos metai: 1998, x-axis travel 4,300 mm y-axis travel 1,200 mm z-axis travel 1,500 mm Control unit: Heidenhain TNC 426 PB Table size: 6,120 x 1,000 mm Spindle taper: ISO 50 Spindle speed: 20 – 3,000 rpm Working feed rate: 5,000 mm/min Gjdpsxvtgajfx Abmskf Handwheel: HEIDENHAIN HR-410 Table load capacity: 20,000 kg Tool changer: 40 positions Rapid traverse: 12,000 mm/min Machine weight: approx. 28 t

Sąlyga: naudotas, Gamybos metai: 2013, veikimo valandos: 3 064 h, Usable material: Asphalt Serial number: 10188210xxxx Please contact ATS Norway for further information. Please provide the reference number when making inquiries: 20327 Specifications: - 2013 model - 3,064 operating hours - Deutz engine - Hydraulic lift and lower functions - Milling width of 60 cm - Roof lowering and lifting function - Available immediately Description: We have a Bomag BM600/15 asphalt milling machine from 2013 for sale. Everything operates as it should, according to the owner's statement. Gsdpjwi Rc Uofx Abmskf All maintenance has been carried out in our own workshop. The milling width is 60 cm. Errors and omissions excepted. Available immediately Operating hours: 3,064 Net weight: 6,800 kg Model: BM600/15

Gamybos metai: 1988, Sąlyga: geras (naudotas), For sale is a milling machine from Maho, model 500 W. The machine is in good condition and fully operational. Gkjdsittrlepfx Abmef Year of manufacture: 1988 Heidenhain TNC 232 Travel distances: X - 500 mm, Y - 380 mm, Z - 350 mm Spindle taper: ISO 40 Vertical quill travel: 50 mm Spindle speeds: 20–4000 rpm, stepless Feed range: 1–3000 mm/min Rapid traverse: 5 m/min Table load capacity: 250 kg Total power requirement: 11.3 kW Machine weight: approx. 2 t All prices plus VAT. Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Sąlyga: naujas, X ašies eiga: 6 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 000 mm, frezos galvos padėtis: Universal-Diagonal-Fräskopf, greitas poslinkis X ašimi: 30 000 m/min, greitas poslinkis Y ašis: 30 000 m/min, greitasis eiga Z ašyje: 30 000 m/min, veleno greitis (maks.): 6 000 aps./min, pasukimo diapazonas: 1 °, stalo ilgis: 7 500 mm, stalo plotis: 1 100 mm, sukimo momentas: 1 178 Nm, stalo apkrova: 42 000 kg, aušinimo skysčio tiekimas: 36 juosta, ašies variklio galia: 53 W, Įranga: sūkių greitis be galo kintamas, VISIŠKAI NAUJA STATYVINĖ KONSOLINĖ FREZAVIMO STAKLĖ Valdymas ir varikliai: Gedpfx Aevrv Susbmskf Dvi HEIDENHAIN TNC 640 skaitmeninės valdymo sistemos – viena priekyje, kita gale kabinoje HEIDENHAIN paketas (varikliai, matavimo sistemos ir rankenėlė) Papildoma įranga: Įrankių keitimo sistema su dvigubu griebtuvu, 60 pozicijų Dvigubas vyrių tipo drožlių transporteriais (išilginis), vienas priekyje ir vienas gale Tikslumai: Pozicionavimo tikslumas: ±0,040 mm Kartojimo tikslumas: ±0,008 mm Tik užklausos iš Vokietijos bus nagrinėjamos

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2016, X ašies eiga: 6 500 mm, Y ašies eiga: 1 800 mm, Z ašies eigos atstumas: 1 300 mm, padavimo ilgis X ašis: 10 000 mm, padavimo eiga Y ašimi: 10 000 mm, padavimo ilgis Z ašis: 10 000 mm, greitas poslinkis X ašimi: 35 m/min, greitas poslinkis Y ašis: 35 m/min, greitasis eiga Z ašyje: 35 m/min, veleno greitis (maks.): 7 000 aps./min, veleno greitis (min.): 20 aps./min, stalo ilgis: 8 000 mm, stalo plotis: 1 100 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2016 Travel / Movements: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Transversal (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on table surface: 7 units T-slot width: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 43 kW (100% duty cycle) Spindle speed range: Spindle speed max.: 20 - 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axes mm/min: 2 – 10,000 Gedpfexvx Amsx Abmekf Max. Rapid traverse speed: X, Y, and Z axes mm/min: 35,000 Footprint SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, diagonal H207 Adapter – angle milling head SK50 with Hirth gearing Automatic tool changer with 60 magazine slots Chip conveyor Preparation / integration for NC rotary table Adaptive Control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for profitable entry into our product range. The machines available in this line are procured by us following a strict selection process and undergo thorough inspection (Deep-Dive-Check). After extensive cleaning, all identified obvious defects and faults are professionally rectified by our expert service team.

Sąlyga: paruoštas naudoti (naudotas), Travels 300x150x340 mm Universal table 600x260 mm Spindle mount ISO40 Gjdedr E Apepfx Abmjkf Spindle speeds 40–2000 rpm Digital readout Various accessories MARCELS MASCHINEN CH

Sąlyga: naudotas, Gamybos metai: 2000, x eiga 22 000 mm y eiga 1 500 mm z eiga 3 000 mm Valdymas SIEMENS 840 D Frezavimo galva - pasukama 0,001/0,001 laipsnio Universalioji frezavimo galva 45° Vidinis aušinimas 20 bar Drožlių transporteris: taip Įrankių keitimo įrenginys: 30 pozicijų Aušinimo skysčio talpa: 1 100 l Įrankio tvirtinimas DIN 69871A ISO 50 Bendras galios poreikis: 45 kW Mašinos svoris apie 68 t Gedpoxvtf Nsfx Abmokf ZAYER važiuojantis stovo frezavimo/gręžimo staklės 30 KCU 22000 - Apsisukimai: 6 000 min-1 - Padavimas: iki 5 000 mm/min - Greitas važiavimas: - X ašis: 10 000 mm/min - Y/Z ašys: 15 000 mm/min Nuotraukose parodytas apvalus stalas ir plokščių laukas neparduodami!

Sąlyga: naujas, Type: MX5117B Arbeitsflächengröße: 1130 x 670 mm Spindeldurchmesser: 35 mm Spindeldrehzahl: 6000 / 8000 / 800 / 10.000 U/min Maximale Bearbeitungshöhe: 120 mm Gkjdpfxod R Shns Abmjf Motorleistung: 4 kW Absaugstutzen: 200 x 65 mm, 200 x 80 mm Transportmaße: 1130 x 670 x 1100 mm Gewicht: 325 kg

Sąlyga: naudotas, Gamybos metai: 2013, Technical details: X-travel: 30,000 mm y-travel: 3,600 mm z-travel: 1,900 mm Milling spindle speed range: 1 – 4,000 rpm Spindle taper: ISO 50 Feed rate: 1 – 10,000 mm/min Rapid traverse: 25 m/min Milling spindle motor: 46 kW Total power requirement: 85 kW Approx. installation space required: 45 x 8.7 x 5.5 (LxWxH) m Equipped with CNC HEIDENHAIN iTNC 530 Gjdpfxsvmzihj Abmskf Automatic milling head indexing 2.5° Table surface: 31,000 x 2,500 mm (4 plates 6,000 x 2,500 mm + 1 plate 7,000 x 2,500 mm) 2 chip conveyors, coolant system

Sąlyga: naudotas, BOKO WF3-K, CNC vertikali frezavimo staklės, Heidenhain 426 CA CNC valdymas, stalas 810 x 1300 mm, X 1200 mm, Y 755 mm, Z 1050 mm, veleno greičiai 18 – 1800 aps./min., konsolės eiga 300 mm, lova 3100 x 1300 x 600 mm, galva 1100 x 1000 x 1400 mm, kolona 1400 x 1300 x 2400 mm, stalas ir balnelis 3210 x 1250 x 750 mm, valdymo pultas 1700 x 400 x 2000 mm, +pakabinamas pultas, aušinimo skysčio bakelis, frezavimo priedas, įrankiai Gsdow U Uhqjpfx Abmokf

Sąlyga: naudotas, Gamybos metai: 1999, veikimo valandos: 19 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 85525, X ašies eiga: 1 760 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 600 mm, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, veleno greitis (maks.): 6 000 aps./min, įvesties srovės tipas: trifazis, bendras plotis: 2 900 mm, bendras aukštis: 3 100 mm, bendras ilgis: 3 800 mm, stalo ilgis: 2 030 mm, stalo plotis: 500 mm, stalo apkrova: 900 kg, bakelio talpa: 290 l, įrankio ilgis: 250 mm, įrankio skersmuo: 180 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, 4 ašys 36 įrankių vietos SK40 Švytuoklinis darbas su pertvara 2x pasukami tiltai 290 l aušinimo skysčio bakas su juostiniu filtru Heidenhain TNC 410 MA valdymo sistema Gkjdpfoxup Iqsx Abmjf A pavara RTA 200/300

Sąlyga: naudotas, Gamybos metai: 2002, Technical Details: Gkedpfx Asv Uzt Ajbmsf X-axis travel: 16,300 mm y-axis travel: 2,600 mm z-axis travel: 1,600 mm Spindle taper ISO: 50 Spindle speeds: 22 - 4,000 rpm Rapid traverse: 24 / 36 m/min Main motor: 37 kW Total power requirement: 50 kW Equipped with CNC HEIDENHAIN TNC 430 automatic universal milling head automatic tool changer with 90 stations coolant system, chip conveyor