Frezavimo Mašina Lentelės pirkti naudotą (17 966)

Sąlyga: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 900 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 700 mm, veleno greitis (maks.): 8 000 aps./min, Work Table Clamping Surface mm 3000 x 1000 Table Height mm 750 Number of T-slots 6 Size of T-slots mm 18 Travel Paths X-Axis mm 2900 Y-Axis mm 1000 Z-Axis mm 700 Distance between Table Top and Spindle Bottom min/max. mm 150 / 850 Main Spindle Drive for 8000 rpm AC Motor, frequency controlled kW 16 at 44% duty cycle Speed Range: rpm 15 – 8000 Torque at 44% duty cycle Nm 96 (constant up to 1500 rpm) Cedpfew E Ey Hsx Admehf Feed Drives X-Axis AC Servo Motor kW 3.5 Y-Axis AC Servo Motor kW 2.0 Z-Axis AC Servo Motor kW 3.5 Rapid Traverse Speeds (X/Y/Z): m/min. 30/30/20 Indirect linear measuring system. Accuracy Positioning Accuracy X-, Y-Axis over 1000 mm mm ±0.0150 Repeatability X-, Y-Axis mm ±0.0075 Positioning Accuracy Z-Axis mm ±0.0150 Repeatability Z-Axis mm ±0.0075 Tool Magazine 2x 24-Station Disc magazine design - Tool stations 16 - Tool shank (DIN 69871/69872) SK 40 - Max. Tool Diameter mm 76 - Max. Tool Length mm 300 - Max. Tool Weight kg 8 Machine Control: Heidenhain TNC 426 Enclosure Guarding of the entire work area, designed as partial enclosure per current standards of German accident prevention regulation (UVV) and European Standard EN 12417, with manually operated work area door including electrical interlock and safety. Machine door equipped with polycarbonate glazing. 30 bar High-Pressure Coolant System (IKZ) For use with tools that have internal coolant supply, switchable between 19 liters/min at 30 bar or 19 liters/min at 15 bar, complete with free-standing paper belt filter. Internal cooling also possible with air. Clean tank volume l 500 Filtration grade µm 30 Filter capacity l/min. 120 Hinged Belt Chip Conveyor Instead of chip collecting tray with integrated coolant tank, right-hand discharge Discharge width approx. mm 300 Discharge height approx. mm 1050 Incl. coolant system Tank capacity liters approx. 150 Delivery rate l/min. 30 Pump pressure bar 2.0 Heidenhain HR 410 Handheld Control Unit External handheld control unit with built-in electronic handwheel, connected to machine via cable, for manual axis movement, with emergency stop button. Centralized Grease Lubrication Documentation Operating and programming manual Hydraulic and pneumatic diagrams Wiring diagram Test report

Gamybos metai: 2001, veikimo valandos: 27 046 h, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, CNC travelling column milling machine in cast iron construction Extremely stable design thanks to triple-guided X-axis and fixed table Machine will be provided EXW TECHNICAL DETAILS X-axis (Longitudinal) linear guideway: 5,300 mm (triple-guided) Y-axis (Cross) linear guideway: 1,000 mm (double-guided) Z-axis (Vertical) box guideway: 1,500 mm (double-guided) Spindle speed range: 60 to 3,000 rpm Tool interface: SK 50 Tool changer: 40 positions Pull stud: DIN 69872-B Drive power: 30 kW Tool dimensions: max. L=350mm / Ø=200mm Table size: 6,000 x 1,000 mm Heidenhain control: TNC 426 with color display and handwheel Rapid traverse X, Y, Z axis: 10,000 mm/min Clamping area: 6,000 x 1,000 mm T-slots: 22 H12 / spacing 130 mm Central T-slot: 22 H7 MACHINE DETAILS Total operating hours: 62,774 (as of 11/2022) Coolant system external: 1.1 kW, 50 l/min Machine weight: 43,000 kg EQUIPMENT - Electric handwheel Heidenhain - Pendulum machining function monitored by light barriers - New X-axis covers - Dual chip conveyor - New milling head bearing in 2021 - Operating manual / documentation CONDITION - Service and maintenance performed as scheduled - Geometry in good order - Suitable for pendulum machining Cedpslhqkhefx Admohf Machine available from July-August

Sąlyga: naudotas, AUTOMATIC MOULDER WITH 4+1 SPINDLES STETON MODEL FAST-5S - CE STANDARDS - USED - Serial no. 25 906/001 Csdpfx Adsmxliaemjhf

Gamybos metai: 1989, Sąlyga: naudotas, x-travel: 1100 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain TNC 335 B* Tool holder: SK40 Table surface - top: 1650 x 700 mm Table surface - bottom: 1870 x 300 mm Spindle speed: 3000 rpm Spindle drive approx. 9 kW Cjdpfed Ih Rxox Admohf *Control is defective!!!! Horizontal and vertical milling Head position change is manual-hydraulic Vertical head with quill, boring depth 100 mm

Sąlyga: naudotas, Cylindrical face mill, cylindrical cutter, milling cutter, shell-end milling cutter -Manufacturer: Garant, shell-end face mill -Type: H 40Ø x 20 x 16 H C7 Sp.224mm Codpfx Adsh Tk D Tjmjhf -Holder: with keyway -Cutting material: HSS-Co5 -Dimensions: Ø 40 x 20 x 16 mm -Weight: 0.1 kg

Sąlyga: naujas, Gamybos metai: 2023, X ašies eiga: 16 000 mm, Y ašies eiga: 4 000 mm, Z ašies eigos atstumas: 1 600 mm, Heidenhain / Siemens valdymas Vandeniu aušinamas inline variklis 43 kW / 900 Nm Judėjimo diapazonai: X= 16.000 Y= 4.000 Z= 1.600 Frezavimo galvos: 2,5°x2,5° / 1°x1° / 0,001°x0,001 / pino Papildoma įranga: Įrankių keitiklis 40 / 60 / 80 / 100 NC stalai Plokščių laukai Karuselės tipo sukamieji stalai Drožlių transporteriai Automatinė frezavimo galvos keitimo sistema Cjdpfsqy Hkaox Admehf Švytuoklinis apdirbimas Purkštuvų apsauginis gaubtas Operatorių palaikymo technologiniai paketai

Gamybos metai: 1964, Sąlyga: paruoštas naudoti (naudotas), Padavimas: 250 mm/min, apsukos: 2800 aps./min, įrankio skersmuo: 200 mm, svoris: apie 850 kg. Apžiūra vietoje galima. Chsdpfx Asw Iqg Njdmof

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: 5319, X ašies eiga: 8 000 mm, Y ašies eiga: 2 600 mm, Z ašies eigos atstumas: 1 300 mm, BASE MACHINE PowerSpeed 5 WITH FORK HEAD – TECHNICAL KEY DATA Travel distances: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat bed design with 1,000 mm guideway width. Two electric motors drive via a centrally mounted rack. Hardened compact roller guides ensure high precision. Machine column (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamics and accuracy. Protected by telescopic steel covers. Spindle carriage and headstock: Manufactured from GGG 60 cast iron, guided via compact roller guides. Optimum power transmission thanks to long guides and close arrangement of Y- and Z-axes. Dual spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Digital individual drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, contactless linear measuring systems for high production accuracy. Automatic 2-axis fork head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230 V, 50 Hz, 80 kVA connected load. Control cabinet (IP54) with control and switching devices. Cable length machine–cabinet: 5 m. Control cabinet cooling: Dual-chamber system with automatic internal air cooling and dehumidification. Lubrication: Central lubrication for guides, permanent grease lubrication for main spindle, oil mist lubrication in milling head. Energy supply: Compressed air 4–6 bar, connection G ¼, with pressure regulator and condensate separator. Control system: Siemens 840D sl with swiveling operating panel. Wireless handwheel with LCD display, potentiometers and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification by e-mail/SMS (SIM card and network required). Chodpfx Adswdub Demef TightBlock base frame (X = 8,000 mm): Heavy composite construction for vibration damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm X-travel, statically verified. Coolant system: 500 l tank, filtration unit

Sąlyga: naudotas, Gamybos metai: 1998, AUTOMATIC 5-SPINDLE MOULDER WEINIG MODEL PROFIMAT 23 E – USED - Equipped with ATS device - Working width: 260 mm, working height: 160 mm Configuration: - Bottom horizontal spindle 5.5 kW - Right vertical spindle (7.5 kW right + left) - Left vertical spindle - Top horizontal spindle 7.5 kW - Bottom horizontal spindle 11 kW - Year: 1998 (CE compliant) - Voltage: 380 V / 50 Hz Csdpomxkx Hefx Admshf

Sąlyga: naudotas, Travel of axes: X: 300 mm Y: 350 mm Chedpfx Adsq Awhfsmjf Z: 200 mm Weight: approx. 800 kg

Sąlyga: naudotas, Cylindrical face mill, side and face mill, milling cutter, arbor-mounted milling cutter - Manufacturer: Fette, cylindrical face mill with keyway - Model: Fette 50 x 25 H Sp 588 - Mounting: with keyway - Cutting material: HSS (High Speed Steel) - Dimensions: Ø 50 x 25 x 22 mm Chedpsh Tk Dhjfx Admjf - Weight: 0.2 kg

Sąlyga: naujas, Gamybos metai: 2024, X ašies eiga: 10 000 mm, Y ašies eiga: 3 200 mm, Z ašies eigos atstumas: 1 600 mm, Heidenhain / Siemens control system Water-cooled inline motor 43 kW / 900 Nm Travel paths: X = 4,000 – unlimited Y = 2,600 / 3,200 Z = 1,600 Chodpfx Adeqy Hinemof Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001° / quill Additional equipment: Tool changer 40 / 60 / 80 / 100 NC tables Plate fields Rotary tables (carousel type) Chip conveyor Fully automatic milling head change system Pendulum machining Splash guard enclosure Operator assistance technology packages

Sąlyga: naudotas, Gamybos metai: 1986, 3-axis milling machine Codpfjivg Saox Admohf X-axis travel ----- 300 mm Y-axis travel ----- 110 mm Z-axis travel ----- 210 mm Milling table ----- 480 x 125 mm Spindle taper ----- ISO30 Spindle speed ----- 100 - 4000 rpm Weight ----- 750 kg Dimensions ----- 1550 x 1150 x 1700 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2014, Siemens 840 D Pasukama valdymo konsolė su SIEMENS 840 D Solution Line valdymu. Eigos kelias X 8000 mm Eigos kelias Y 1300 mm Chsdpsw Syv Uofx Admjf Eigos kelias Z 2200 mm Įrankių sistema SK 50; Capto C8 Pagrindinis velenas 20–4000 aps./min. 3D mašinos tūrio modelis HEIDENHAIN matavimo sistema visose ašyse. Automatinis centrinis tepimas su slėgio ir laiko kontrole visoms ašims ir judėjimo elementams. Matavimo jutiklių sistema RENISHAW RMP60 M Įrankio lūžio kontrolė per matavimo galvutę BRANKAMP CMS susidūrimo stebėjimo sistema su dviem matavimo kanalais: FIBRO sukamojo fiksatoriaus centrų aukštis 1100 mm FIBRO sukamojo fiksatoriaus centrų atstumas 900–3000 mm Maks. apsisukimo Ø FIBRO sukamojo fiksatoriaus 2200 mm FIBRO karuselinio stalo D=1600; 250 aps./min. Karuselinio stalo FIBRODYN 1600 mm: Stalo plotas 6000x2000 mm d‘Andrea slankiklis Universalus frezos galva Automatinis įrankių keitiklis ATC, 80 vietų žurnalas M versijoje: 3 frezos galvos vietos, Aukšto slėgio siurblys 30 bar Darbo valandos 4261 h

Sąlyga: naudotas, Gamybos metai: 1994, WEINIG PROFIMAT 23 AUTOMATIC 5-SPINDLE MOULDER – USED Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle Chedpfsrm Rxwsx Admef - 4) Top horizontal spindle - 5) Bottom horizontal spindle Working width: 230 mm Year: 1994 Voltage: 380/50

Gamybos metai: 1979, Sąlyga: paruoštas naudoti (naudotas), Traverse path X/Y/Z: 950mm/250mm/470mm, table dimensions X/Y: 1200mm/440mm, tool holder: ISA40, spindle speed: 1800 rpm, machine dimensions X/Y/Z: approx. 2150mm/2000mm/2100mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible. Chedpfx Ajw Duukedmef

Sąlyga: naudotas, Cylindrical face milling cutter, cylindrical cutter, milling cutter, side-and-face milling cutter - Cylindrical face milling cutter: with longitudinal keyway - Type: HSS 60x30x27 H - Arbor hole: with parallel key slot Chsdpfx Adeh Tk D Ejmef - Cutting material: HSS - Dimensions: Ø 60 x 30 x 27 mm - Weight: 0.4 kg

Sąlyga: naudotas, Gamybos metai: 2001, X ašies eiga: 1 200 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 800 mm, Travel paths: X-axis 1,200 mm Y-axis 650 mm Z-axis 800 mm Spindle drive Spindle mount: SK50 Drive power: 23 kW Spindle speed: 7,300 rpm Internal coolant supply: 25 bar NC rotary indexing table For positioning and circular milling Table diameter: 980 mm Table load capacity: 2.5 t Electrical equipment: Chjdpfxjwgdkte Admjf Power consumption: approx. 50 kW Automatic chain-type tool changer Number of tool stations: 31 Features/Accessories: - Torque: 680 Nm - Milling head swivels automatically from horizontal to vertical - Electronic handwheel - Chip conveyor Space required (L x W x H): 5.4 x 3.5 x 3.5 m Machine weight: approx. 12 t

Sąlyga: naudotas, Gamybos metai: 2013, mašinos/transporto priemonės numeris: 5279, X ašies eiga: 8 000 mm, Y ašies eiga: 1 600 mm, Z ašies eigos atstumas: 1 300 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 22 aps./min, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Horizontal, longitudinal (X-axis): 8,000 mm Spindle stock slide, vertical (Y-axis): 1,600 mm Spindle stock, horizontal traverse (Z-axis): 1,300 mm RADIO MEASURING PROBE: m&h HSK 100 SIEMENS HANDHELD OPERATOR PANEL B-MPI RIDING OPERATOR PLATFORM 3-SIDED SPLASH AND CHIP GUARD CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm, Width: 2,500 mm WASHDOWN GUN IN THE WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 L 2-CHANNEL COLLISION MONITORING SYSTEM 2 monitoring channels: – 1. Collision monitoring orthogonal milling head (Channel 1) – 2. Collision monitoring fork head (Channel 2) PENDULUM MACHINING IN 3 WORK AREAS MULTI-AXIS INTERPOLATION FOR FREEFORM SURFACES (TRAORI, 3D tool radius correction, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For fork head, arranged on clamping plate Storage spaces: 10 Max. tool weight: 12.5 kg Max. tool length: 200 mm Max. tool diameter: 63 mm Max. tool diameter with free neighbouring slot: 250 mm Tool holder: HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Max. tool diameter with full magazine: 125 mm Max. tool diameter with free neighbouring slots: 250 mm Max. tool length: 500 mm Max. tool weight: 25 kg Max. tool load moment: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 FORK HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE – High-frequency milling spindle: – Built-in high-frequency spindle – Tool holder: HSK – A 63 DIN 69893 – Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle – Speed range up to 20,000 rpm – Motor spindle bearings with lifetime grease lubrication – Sealing air protection – Torque: 40 Nm at 100% duty cycle, 50 Nm at 40% duty cycle – Automatic tool clamping – Power transmission according to speed/power diagram GMN HCS 170 – Technical data per data sheet E 745.1467.00 UNIVERSAL MILLING HEAD, ORTHOGONAL DESIGN – Liquid-cooled milling head – Cast construction GGG 60 – Milling head swivelable 180 x 1 degree, automatic – The resulting positions can be not only approached but also programmed and processed by CNC control – Repeatability at the spindle nose ±0.002 mm, indexing accuracy ±3 arcseconds – Tool holder: HSK 100-A – Milling spindle equipped with hydromechanical quick tool clamping – Tool retention force: 45 kN – Internal coolant supply, Form A-D – External coolant supply via shower ring – Speed range: 22–4,000 rpm MAIN DRIVE Via a frequency-controlled, liquid-cooled AC motor with – 32 kW drive power at 100% duty cycle; 46 kW at 40% duty cycle – Direct power transmission WITHOUT gearbox, thus no heat generation or wear of a gearbox – 637 Nm torque at 100% duty cycle, 875 Nm at 40% duty cycle Chsdpsu Sppwofx Admjf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Manufacturer: Emerson Macchine Torino Model: Carrera 700 Year of manufacture: 2021 Technical specifications: Chodpfxsw Ew Dwj Admsf Table size: 1,320 x 320 mm • X - Y travel: 1,000 x 290 mm • Z-table travel: 400 mm • Distance spindle to table: 140 - 540 mm • Distance spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard features: • Automatic tool screwdriver • Gearbox • Horizontal spindle • Automatic feed on axes • Automatic spindle downfeed • Cooling system • Lamp Main features: • Three-axis digital readout (Z with head movement) • Thread cutting device (reverse device) • Table guard Accessories: Documentation Tool Please send inquiries by e-mail only. All information is given to the best of our knowledge. Subject to errors. This offer is directed exclusively at entrepreneurs within the meaning of § 14 BGB. The sale is made under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller as well as for any injury to life, body or health. For further information, please visit the Witzenmann GmbH website under the headings "Impressum", "AGB" and "Datenschutz".

Sąlyga: labai geros būklės (naudotas), X ašies eiga: 22 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 2 600 mm, stalo ilgis: 22 000 mm, stalo plotis: 2 000 mm, sukamosios stalo skersmuo: 2 000 mm, Double Column Milling Machine Technical Data Travel per Machine • X-axis (bed): 22,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (horizontal spindle slide): 1,500 (1,200) mm Control System • CNC Control: Heidenhain TNC 430 Automatic Tool Changer • Tool robot • 90 magazine positions Universal Milling Head in Orthogonal Design • Swivel range, milling head holder: 360 x 1° • Swivel range, milling head: 180 x 1° • Tool holder: SK 50 DIN 69871 • Spindle speed: 3,200 rpm 2x Chip Conveyors • Discharge height above floor: 1,250 mm • Task length: 24,000 mm Clamping Table Cjdpfx Adswi Iaqsmehf • Clamping area: 22,000 x 2,000 mm Rotary Table • Clamping area: diameter 2,000 mm About Us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core expertise lies in tool milling machines. Our services include spare parts supply, on-site customer support, machine overhauls, and CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - CNC control modernization _____ _____ _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used fraesmaschine – used cnc milling machine – used drilling milling machine – used metal milling machine – metal mill – used metal milling machine – used cnc mill – cnc milling machines – milling machine – large component machining – cnc large part machining – milling – shw – uf6 – uf 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 65039, X ašies eiga: 1 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 700 mm, veleno greitis (maks.): 8 000 aps./min, Travelling column machine Overhauled in 2023 Codpfxowv Nl Uj Admohf Worktable clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 T-slot size (DIN 650) mm 18 Traversing paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top – spindle nose min/max. mm 150 / 850 Main spindle drive for speed 8000 rpm AC motor, frequency controlled kW 16 at 44% duty cycle Speed range: rpm 15 – 8000 Torque at 44% duty cycle Nm 104 Constant up to rpm 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect measuring system. Accuracy Positioning accuracy X-, Y-axis over 1000 mm mm ±0.0150 Repeatability X-, Y-axis mm ±0.0075 Positioning accuracy Z-axis mm ±0.0150 Repeatability Z-axis mm ±0.0075 24-position tool magazine, right-mounted on the travelling column - Tool stations 24 - Tool holder (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain iTNC530, optionally 620

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 12 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 2 600 mm, stalo ilgis: 12 000 mm, stalo plotis: 2 000 mm, Travelling Column Milling Machine Technical Data Travel Paths • X-axis (bed): 12,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (horizontal spindle slide): 1,500 (1,200) mm Chodpfx Adswuy Udjmsf Control • CNC Control: Heidenhain TNC 430 Automatic Tool Changer • Tool Robot • 90 magazine positions Universal Milling Head in Orthogonal Design • Headholder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed: 3,200 rpm Chip Conveyor • Discharge height above floor: 1,250 mm • Input length: 12,000 mm Clamping Table + Rotary Table • Clamping surface: 13,000 x 2,000 mm Including rotary table with a clamping surface of 2,000 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core competence lies in tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, as well as control retrofitting. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ _____ _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used drilling and milling machine – used metal milling machine – used metalworking mill – used cnc mill – cnc milling machines – vertical column milling machine – large component machining – cnc large part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 10 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 2 600 mm, stalo ilgis: 10 000 mm, stalo plotis: 2 000 mm, Travelling Column Milling Machine Chsdjwuy Nbopfx Admef Technical Data Travel Distances • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (horizontal spindle slide): 1,500 (1,200) mm Control System • CNC Control: Heidenhain TNC 430 Automatic Tool Changer • Tool robot • 90 magazine positions Universal Milling Head in Orthogonal Design • Swivel range of the milling head flange: 360 x 1 degree • Swivel range of milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed: 3,200 rpm Chip Conveyor • Discharge height above floor: 1,250 mm • Feed length: 10,000 mm Table Area • Clamping area: 10,000 x 2,000 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core competence focuses on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, as well as control upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control retrofits _____ _____ _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used cnc milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used cnc mill - cnc milling machines - cnc milling machines - milling machine - large part machining - large parts machining - large workpiece machining - cnc large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Sąlyga: labai geros būklės (naudotas), X ašies eiga: 5 000 mm, Y ašies eiga: 1 600 mm, Z ašies eigos atstumas: 1 500 mm, greitas poslinkis X ašimi: 8 m/min, greitas poslinkis Y ašis: 8 m/min, greitasis eiga Z ašyje: 8 m/min, X ašies padavimo greitis: 8 m/min, Y ašies padavimo greitis: 8 m/min, padavimo greitis Z ašis: 8 m/min, pasukimo diapazonas: 340 °, stalo ilgis: 5 000 mm, stalo plotis: 1 730 mm, Technical Data Travel Paths • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Control System • CNC control: Heidenhain TNC 415 Feed Rate • X, Y, and Z axes stepless: 2 – 8,000 mm/min Universal Milling Head in Orthogonal Design • Motorized swivel range of milling head mount: 340 degrees • Milling head swivel range: 180 degrees • Tool holder: SK 50 Clamping Table • Clamping surface: 5,000 mm x 1,730 mm • T-slots: 9 x 28, DIN 650 • T-slot spacing: 160 mm Year of manufacture: 1992 Partial overhaul: 2025 The machine can be demonstrated under power at D-73479 Ellwangen. Cjdpfx Adewfd Dkjmshf About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system retrofit/modernization. Our services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ----- Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring and milling machine – used metal milling machine – used metal mill – used CNC mill – cnc milling machines – milling – large part machining – CNC large part machining – SHW – UF6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine