Eisen Und Hammerwerk Gmbh pirkti naudotą (86 824)

Sąlyga: naujas, Gamybos metai: 2025, TOP Carousel Storage System for 3D Foil Rolls Our film carousel storage systems are suitable for storing all types of foil rolls. They can be used as a high-bay storage solution directly at the membrane press or as a space-saving 3D foil stock. With our carousels, a large number of foil rolls can be stored in the smallest space (approx. 2.4m x 1.2m), accommodating up to 32 rolls with a diameter of 300mm. The required film is immediately accessible at the push of a button. Our standard carousels are available in heights from 2.8 meters up to 6.0 meters. Custom solutions are also available upon request. Please contact us – together we will find the right storage solution for your needs. As optional additional equipment, we offer centering sleeves, manual or automatic cutting devices, and ionization solutions. • Hanging bars with diameters from 42.4mm up to max. 76mm • Side cladding over the entire construction height • Protective grid from 2.2m above floor level up to the top edge of the carousel Tjdpfx Asff Huwsg Ref • Load chain as hollow pin chain, breaking strength 100 kN, pitch 50mm = support rod hanger spacing. Circulation speed approx. 5.5 m/min • Operation via key-operated switch with return (dead man’s control) for up/down movement • Rated voltage 400 V; 3N; 50 Hz, power supply cable with CEKON plug 16A, site-side fuse protection 10A time-delay • Attention!!! Installation requires a stable, level, and solid floor (no floating screed). Minimum floor load capacity must be 2.4kg/cm²

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 300 mm, bendras plotis: 1 300 mm, bendras ilgis: 2 500 mm, Our innovative welding cell maximises both the efficiency and flexibility of your production. Equipped with a Kuka KR6 robot and a Dinse welding torch, it offers two workstations for uninterrupted production workflows. The KRC4 control cabinet operates the robot with precision, ensuring maximum reliability as well as seamless integration into modern manufacturing systems. The user-friendly interface simplifies programming and guarantees consistently high weld quality. This compact solution sustainably increases productivity and reduces operational costs. Cell: ◦ Dimensions: 2.50 m x 1.30 m x 2.30 m ◦ 2 workstations, approx. 80 cm x 80 cm ◦ Compatible with preferred welding equipment upon request (e.g. Fronius, Lorch, etc.) ◦ Immediately available ◦ Location: Worms, Rhineland-Palatinate Control Cabinet: ◦ Control unit: KRC 4 Compact ◦ Hard drive: SSD ◦ Interfaces: USB 3.0, GbE, DVI-I ◦ Ambient temperature: +5°C to +45°C Robot: ◦ Kuka KR-6 R900 sixx Agilus series ◦ 6 axes ◦ Max. payload: 6 kg ◦ Reach: 0.9 m ◦ Repeatability: ± 0.02 mm Tsdevz Tv Nspfx Ag Rof ◦ Year of manufacture: 2017 Visit our website and let’s achieve your production goals together!

Sąlyga: naudotas, 5tSWF crane technology GmbH Tedpfxedc A R Ts Ag Ref

Sąlyga: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, tūrio srautas: 10,2 m³/val, įėjimo įtampa: 230 V, 2018 Vakuumpumpe RZ 9 S/N 100018206 Nennfördermenge: 10,20 Typ: RZ 9 Elektrischer Anschluss: 230 V Technische Daten Max. Saugvermögen 50 Hz (mbar): 8,9 m³/h Max. Saugvermögen 60 Hz (cfm): 6,0 cfm Endvakuum: 2 x 10⁻³ mbar / 1,5 x 10⁻³ Torr Endvakuum mit Gasballast: 1 x 10⁻² mbar / 0,75 x 10⁻² Torr Endpartialvakuum ohne Gasballast: 4 x 10⁻⁴ mbar / 3 x 10⁻⁴ Torr Wasserdampftoleranz: 40 mbar / 30 Torr Anzahl der Stufen: 2 Zulässiger Umgebungstemperaturbereich (Betrieb): 15 - 40 °C Zulässiger Umgebungstemperaturbereich (Lagerung): -10 - 60 °C Max. Auslassdruck (absolut): 1,1 bar Ölfüllmenge min./max.: 0,45 / 0,85 l Sauganschluss Kleinflansch KF DN 25 Tsdpew Rqx Dofx Ag Rsf Auslassanschluss Kleinflansch KF DN 25 Nennmotorleistung: 0,30 kW Nenndrehzahl 50/60 Hz: 1500/1800 min⁻¹ Schutzart nach IEC 60529: IP 40 Abmessungen (L x B x H): 503 mm x 156 mm x 240 mm Gewicht: 24,8 kg Geräuschpegel (Schalldruckpegel) bei 50 Hz bzw. 1500 U/min/62% (VARIO)/1500 U/min (VARIO-SP)/12500 U/min (VACUU·PURE®): 52 dBA NRTL-Zulassung: Nein

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Usable height: 380 mm Pump pressure: 2.2 bar Todpfx Agjxiwc Ss Ref Spray volume: 4,200 l/h Load capacity: 100 kg The soiled items to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the wash solution in the tank is heated. With the lid closed, the basket rotates at a constant speed around its own axis. The pump units draw the wash solution from the wash tank and deliver it through six stainless steel spray pipes equipped with overlapping flat jet nozzles. The items to be cleaned are thoroughly sprayed from all sides with the hot solution as the basket, driven by the spray jets, rotates evenly. After the cleaning process is completed, the unit switches off automatically. Advantages: - 1 horizontally arranged pump - Output: 70 L/min - 3 three-dimensional spray pipes made of stainless steel - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating wash basket made of stainless steel, driven by water jet - Steam extraction - Perforated sheet with stainless steel filter inlets above the wash tank - Water shortage protection

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, padavimo plotis: 720 mm, darbinis plotis: 720 mm, įėjimo įtampa: 400 V, Parduodamos 3 mašinos, parduodamos tik kaip komplektas. • Herzog und Heymann – 8 kišenių lankstymo mašina, 72 cm įvado plotis, labai geros būklės volų blokas su langelių lankstymu ir atskiro veikimo dėže. Elektriškai reguliuojamas aukštis. Naudota. • Palamides Alpha 800 – naudota • Bograma UEB 750A pervežimo įrenginys (naujas, niekada nenaudotas) – Būklė: naudota, gera būklė – žiūrėkite nuotraukas – Pardavimas vyksta komercine tvarka, PVM nurodomas atskirai sąskaitoje faktūroje. Todpfx Agjxxr Rcj Ref – Kaina nurodyta be PVM (+19% PVM). – Mašinos vis dar naudojamos, galima susitarti dėl jų perdavimo laiko. – Apžiūrą galima susitarti bet kada. – Pardavimas be garantijos ar grąžinimo teisės.

Sąlyga: naudotas, Candle filter for 3 filter candles with 20" length. Tsdpfx Agexytyne Ref

Gamybos metai: 2025, veikimo valandos: 10 h, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 800 kg, bendras ilgis: 120 mm, bendras plotis: 900 mm, bendras aukštis: 1 900 mm, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a wide range of marking tasks. Equipped with an integrated fiber laser, it can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be fitted with a 20, 30, or 50-watt fiber laser. For permanent markings, the use of a laser is now indispensable in many industries. With its powerful laser software, you can easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no advanced programming skills required. The software automatically increments serial and article numbers after initial setup. Additionally, it can extract data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064 nm • Marking field size 150x150 mm (larger sizes optional) • EZCAD marking software in German/English • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measuring system • Optional: Extraction system (incl. activated carbon filter) • Optional: Autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light tower for operating status indication • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Aluminum profile frame • Air-cooled Tedpoxuvk Eofx Ag Rsf • Door width approx. 700 mm / Door pass-through height: 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Sąlyga: naudotas, Gamybos metai: 1997, Microflow Isolator – Glove Box Glovebox Isolator The unit is unused. Equipped with microfilter extraction type 112108614A36, capacity 1870 m³/h With 2 transfer chambers (for loading and unloading of materials) Inlet/outlet size: W:400 x D:260 x H:430 mm Illumination 2 glove ports Todovw I Npjpfx Ag Ref Castors (unit is mobile) Front window made of polycarbonate Internal dimensions: W:1200 x D:650 x H:100 mm Machine dimensions: W:2100 x D:850 x H:2100 mm Weight: approx. 400 kg

Sąlyga: geras (naudotas), Gamintojas: Plastik-Maschinenbau GmbH (PM) Modelis: PM Wiska 30-25 D Serijos Nr.: M0793 Pagaminta: Vakarų Vokietija (Kelberg / Eifel) Tipas: Vienasraigtis plastiko ekstruzijos presas Tedpfx Agsxu E E Sj Rof Dokumentacija: Pateikta (originalus vokiškas vadovas ir susirašinėjimas iš 1987 m.) Būklė: Naudotas, bet pilnas ir veikiantis Vieta: Ivanka pri Nitre, Slovakija Techninė informacija (apytiksliai) Sraigto skersmuo: 30 mm L/D santykis: 25 D Pagrindinis pavaros variklis: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 aps./min.) Maitinimas: 3 × 380–420 V / 50 Hz Valdymo įtampa: 220 V Aušinimo sistema: Oras aušinamas cilindras su šildymo zonomis Valdiklio spinta: Yra, pilnai sukomplektuota su relėmis, automatiniais jungikliais ir analoginiais matuokliais Aprašymas Kompaktiškas vienasraigtis laboratorinis arba mažų gamybos apimčių ekstruzijos presas, pagamintas Plastik-Maschinenbau GmbH Vakarų Vokietijoje. Sukurtas termoplastikams apdoroti, medžiagoms testuoti ar mažų ekstruzijos linijų poreikiams (pvz. vamzdelių, profilių ar dengimo taikymams). Parduodamas su originalia elektros spinta, slėgio matuokliu ir dokumentacija. Mechaniniu ir elektriniu požiūriu pilnai sukomplektuotas – reikalingas tik standartinis paleidimas.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2010, • Travel paths: X = 3100 mm, Y = 1950 mm, Z = 1390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining, 3000 mm x 1600 mm • 2-axis NC universal boring and milling head, for simultaneous and positioning operation • Spindle: 10,000 rpm, HSK 100, 130 Nm spindle torque • Tool changer system HSK 100 / 40 tool stations for tools up to 750 mm length • Chip augers in X-axis for optimal chip removal • Chip conveyor (scraper belt conveyor), manufacturer Knoll, for cross conveying • Coolant supply 900 l, manufacturer Knoll • External air supply • ICS 60 bar for deep hole machining • Enclosure with safety glass, open at the top for optimized crane loading • Split sliding doors on the front side • Split sliding doors on the operator side • Wireless probe RMP 60 • Including wash pistol • Including platforms at loading and operator sides • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw renewed incl. bearings in September 2021 • X-axis linear guide incl. guide carriage replaced in July 2023 • Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours) • Can be inspected under power in 72793 Pfullingen Tedpfx Asxvlqqeg Rof • Fixators optional • Commissioning/installation optional • Transport optional • Total spindle hours: 23,122 • Total machine hours: 53,991 • Year of manufacture: 2010 Subject to prior sale

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Mobilus dyzelinis šildytuvas, tinkamas statybviečių, salių ar sandėlių šildymui. Techniniai duomenys: • Gamintojas: HEYLO GmbH • Įrenginio tipas: HEYLO K100 • Nominali galia: 116 kW • Tik šildymo dyzelinui pagal EL DIN 51603 Tedpfow Tautsx Ag Rjf • Būklė: naudotas, veikiantis • Daugiau informacijos: žr. tipinę lentelę Papildomai: Priklausantis 1000 l bakas

Sąlyga: naudotas, Gamybos metai: 2017, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 164543A01, Walter Maschinenbau GmbH gaminto kibirų plovimo įrenginys – tvirta pramoninė įranga, skirta automatizuotam maišymo bei transportavimo kibirų valymui. Įrenginys aprūpintas galingomis aukšto slėgio purkštukais ir besisukančiomis galvutėmis, kurios patikimai pašalina net ir įsisenėjusias betono bei kitų medžiagų liekanas. Skirta nuolatiniam naudojimui, pasižymi tvirta plienine konstrukcija ir (priklausomai nuo modelio) gali dirbti tiek su šviežiu, tiek su perdirbtu vandeniu. Puikus pasirinkimas betono maišymo gamykloms ir įmonėms, turinčioms didelį valymo poreikį. Todpoxxpp Asfx Ag Rjf Mašina naudota, netikrinta ir be garantijos. Grąžinimas negalimas.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 20 W, bendras plotis: 605 mm, bendras aukštis: 1 080 mm, bendras ilgis: 350 mm, bendras svoris: 40 kg, garantijos trukmė: 12 mėnesiai, The mobile laser LAS 23 portable stands out due to its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy as well as small workpieces. The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created quickly and easily, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. Additionally, the software can extract data (such as drawing numbers, project titles, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also supported. Made in Germany • Fiber laser 20W (optional: 30 Watt, 50 Watt) • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light to indicate operational status (in handpiece) • Marking software EZCAD Tsdsxuqxqjpfx Ag Rsf • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of the portable laser unit: 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Sąlyga: naudotas, Gamybos metai: 1994, Technical details: Welding current steplessly adjustable: 40...400 A Length: 900 mm Height: 1200 mm Total power requirement: 13.8 kVA Machine weight approx.: 180 kg Space requirement approx.: W:0.6 x L:0.9 x H:1.2 m MIG MAG WELDING MACHINE – welding rectifier offered as a donor for spare parts - Output range: 40A/15V to 400A/34V - Open-circuit voltage: 58V - Characteristic: Constant - Protection rating: IP 23 - Insulation class: F - Water cooling Tedju Nwx Ujpfx Ag Rjf A5 circuit board missing

Gamybos metai: 2020, veikimo valandos: 100 h, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 300 kg, bendras ilgis: 1 330 mm, bendras plotis: 840 mm, bendras aukštis: 1 870 mm, suslėgto oro jungtis: 6 juosta, įvesties srovės tipas: Oro kondicionierius, Kroviklis padėklų krautuvas Traystapler perstatymo įrenginys Tray-Loader TL-6040 – dviejų takelių padėklų (dėžių) krovimo-nukrovimo modulis ekonomiškam LED plokščių padėklų transportavimui. Tušti padėklai paimami iš transportavimo vežimėlio, automatiškai pozicionuojami ir paruošiami užpildymui. Užpildžius, padėklai automatiškai nukraunami ant antro transportavimo vežimėlio. • Kompaktiška konstrukcija • Mažas užimamas plotas • Krovimo-nukrovimo modulis • Transporto vežimėlis • Standartinio padėklo dydis: 400 x 600 mm • Tvirta suvirinto plieno konstrukcija • I x P x A: 840 x 1.330 x 1.870 mm • Rankinio valdymo aukštis: 930 – 1.050 mm • Suslėgtas oras 0,6 mPa (6 bar), be alyvos, filtruotas, sausas • Vidutinės sąnaudos apie 10 l/min Tjdpoxuqtbjfx Ag Rsf • Darbo temperatūra +18°C - +30°C • Svoris apie 300 kg

Sąlyga: naudotas, Technical details: Machine weight approx.: 8 kg Dimensions L x W x H: Ø 160 mm x 85 mm Tsdpfeu N Dw Djx Ag Rsf Origin: Germany Weight: 10 kg Ø 160 mm x 90 mm Magnetic core: 3 pieces, width: 20 mm, spacing: 36 mm

Sąlyga: naudotas, Technical details: Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m Todewiu Smspfx Ag Rof BRUSHING MACHINE for deburring / brushing of pipe ends / welded profile tubes / pipe bodies on the face side

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 690 mm y-axis travel: 400 mm z-axis travel: 550 mm B-axis (table): 360° Control: Siemens 840 D Spindle speed: max. 15,000 rpm Tool clamping system: DIN 69893 standard Tool holder: HSK-A63 Tool magazine: Chain magazine, 12 positions Traversing speed (x/y/z axes): 40 m/min Total power requirement: 195 kW Machine weight approx.: 13.0 t Travelling Column Machining Center - The WZR unit consists of 3 NC machining axes and 1 NC rotary table axis - With rotary indexing table type SKH-NC 4/029; Ø = 460 mm; table plate mounted Ø 500 x 20 mm; max. speed 22 rpm, 4 x 90° indexing - Control panel: SIEMENS Tsdpfx Agju Idl Ss Rsf - Spindle type: DRF-WE-255-N-W-15-30, 15,000 rpm, spindle power = 30 kW - Chip conveyor Knoll type 400K-3/280; discharge height 1,150 mm - Cooling unit for spindle cooling, manufacturer SCHIMBKE type DK 80 V; 3.36 kW int. diameter

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: Voltage: 400 V / Hz Total power requirement: 0.37 kW Machine dimensions approx. LxWxH: L:2.7 x W:0.7 x H:2.0 m Scraper belt conveyor combined with coolant system and torque disengagement Discharge length D = 280 mm Swaf entry width F = 325 mm Tsdpfxev N Ekbs Ag Rsf Insertion height B = approx. 160 mm Insertion height B+I = 220 mm Swaf entry width F1 = 300 mm Swaf entry length = 700 mm Ground clearance I = 60 mm Discharge height above ground level C+I = 950 mm Equipment: 2x support feet

Gamybos metai: 1998, Sąlyga: naudotas, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 pinout Window profile processing machine for materials such as PVC, aluminium, and timber windows in a continuous through-feed process. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, an operator control panel, and transport units. Also included are a station with transport system vibrator, chip conveyor unit, and a stand with confirmation printer. Tsdpfx Aju Ibuwsg Rjf Our photos first show the machine at its location, followed by images depicting the system prepared for transport and sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5 mm - Drilling unit with collet chuck (vertical upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical downward) - Twin drilling unit with collet chuck (vertical downward) - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical upward) - Milling spindle, horizontal, with 11 slotting saws - Triple drilling unit with collet chuck (vertical downward) - Triple drilling unit with collet chuck (vertical upward) - Triple drilling unit with collet chuck (horizontal) 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width: 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width: 2,300 mm

Sąlyga: naudotas, Gamybos metai: 1997, Technical details: Todsu Ibukspfx Ag Rof Tube diameter: 4.75 - 8.0 mm Wall thickness: - mm Minimum bending radius: various mm Maximum bending angle: 180° Compressed air: min. 4.5 bar Total power requirement: approx. 10 kW Machine weight approx.: 6.0 t Machine dimensions approx. (LxWxH): 6.3x3.7x2.0 m Control cabinet dimensions: 1.8x0.5x2.7 m Operator console dimensions (LxWxH): 0.85x0.68x1.65 m Fully automatic, numerically controlled system For bending hydraulic lines and automotive brake lines of various lengths. - Variable number of bends possible (max. 100 bends per tube) - 2 different, independent bending modules. Each module features 2 NC axes with functions: "Longitudinal movement" (axis 1 + axis 3) traversing speed max. 2.0 m/sec. and "Bending head rotation" and "Bending" (axis 2 + axis 4) max. bending angle 180° - Program memory for 250 lines - The loading unit consists of a manually refillable drum magazine (capacity in drum magazine tube Ø=4.75mm to Ø=8.0mm for 500/1000 pieces) - Loading via swing-arm inserter - Operator terminal Bundy GHF 60134 Accessories: - Various individual and add-on components - incl.

Gamybos metai: 2003, Sąlyga: naudotas, Technical Details: Operating pressure: 10 bar Todou N Afgjpfx Ag Rsf Voltage: 400/50 V/Hz Control voltage: 24 V Total power requirement: 0.76 kW Machine weight approx.: 160 kg Dimensions L x W x H: 0.58 x 0.68 x 1.35 m Heat Exchanger - Water Recooling System Area of application: Transfer of thermal energy from one medium to another (liquid or gaseous) Connections: 3/4" for supply/return, 2x on each side 2 units available in stock.

Sąlyga: naudotas, Technical details: Sheet thickness: 1 mm Frame opening: 2,255 mm Maximum bending angle: 130° Total power requirement: 2.25 kW Approx. machine weight: 1,400 kg Machine dimensions (LxWxH): approx. 2.7 x 1.15 x 1.3 m Machine without foot switch; however, it is pre-wired for one. Tjdpfx Ajwq I U Rsg Rjf The previous owner converted the upper beam adjustment to 60 mm; greater adjustment is only possible by reverting the modification. The foot control for automatic operation is missing. Manual operation is functional. No back gauge.

Sąlyga: naudotas, Gamybos metai: 2010, Technical details: X-axis travel: 800 mm Y-axis travel: 685 mm Z-axis travel: 630 mm C-axis: 360° (faceplate table) Control: Siemens 840D Power Line Spindle speed: 20 - 10,500 rpm Spindle torque: 180 Nm Tool holder: HSK-A63 DIN 69893 Tool magazine with: 40 positions Number of tables: 2 Table swivel range +/-: 120° each (A-axis) Table clamping surface: 280 x 275 mm Table load capacity: 320 kg Todou Idgpspfx Ag Rsf Interface: RS232 Spindle operating hours: 38,700 h Total power requirement: 37 kW Machine dimensions approx. LxWxH: 4.0 x 4.4 x 3.0 m Chip conveyor dimensions LxWxH: 2.1 x 1.05 x 1.5 m Coolant system dimensions LxWxH: 1.3 x 1.6 x 1.95 m CNC machining center – 5-axis machining center Clamping table for 4th and 5th axis (swivel range 120° right/left, rotation speed 50 rpm, and rotary operation with faceplate Ø 280 mm / 200 rpm) Max. workpiece size: 940 x 650 mm for/on table With chip conveyor, manufacturer Knoll, model 750 K-1/150; year 2009 Coolant system Bürener with paper band filter, band width 700 mm; year 2009 Both switch cabinets equipped with Rittal chiller A range of accessories, such as various clamping fixtures (manufacturers HILMA and Chick, among others), can be offered separately. In good condition. *