Eitec Gmbh pirkti naudotą (70 660)

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 Guodpfx Acjw U N Ixsujh INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036943, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, allowing you to respond quickly and innovatively to market requirements. It combines high performance, user-friendly operation, and short delivery times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your advantages: – Optimized price-performance ratio for a broad range of applications – High energy efficiency due to a fully electric machine concept – Fulfilment of demanding delivery times thanks to a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670020) CONTROL UNIT • MC P1 with 15'' TFT colour display and multitouch functionality CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platen (h x v) mm 610 x 560 • Mould height min. – max. mm 150 – 400 • Opening stroke mm 750 • Max. mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force fwd/back kN 22 / 22 • Ejector speed fwd/back mm/s 300 / 300 • Max. mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 40 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1860 • Shot volume cm³ 201 • Shot weight at max. stroke (PS) g 183 • Injection speed mm/s 200 • Injection flow rate cm³/s 251 • Screw drive/rpm 1/min 334 • Plasticising rate (standard) g/s 24.7 • Nozzle contact force kN 34 ELECTRICAL PARAMETERS • Connected load kW 20.6 • Installed heating capacity kW 11.5 • Power supply V / Hz 400 / 50 3-phase with neutral Gsdpew Ur I Uefx Acueuh WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.6 • Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT • Wear-resistant plasticising • BluePower full insulation plasticising cylinder • Open nozzle • Pneumatic air valve 1-fold (BWAP) • Pneumatic control hot runner shut-off 1-fold • Electrical interface, cascade 4-fold • Euromap interfaces for handling E18, E63 • Euromap interface (central computer) E67, E77 • Water manifold 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression option • Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP) Gujdpeuggb Dsfx Acueh  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036683, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, įpurškimo slėgis: 1,892 juosta, injekcijos svoris: 358 g, formos aukštis (min.): 200 mm, išmetimo jėga: 33 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 950 mm, įrengimo aukštis: 500 mm, bendras ilgis: 5 650 mm, bendras plotis: 1 820 mm, bendras aukštis: 1 950 mm, bendras svoris: 9 700 kg, šildymo galia: 15,5 kW (21,07 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 570 mm, įrankio svoris: 600 000 g,

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036940, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, įpurškimo slėgis: 1,892 juosta, injekcijos svoris: 358 g, formos aukštis (min.): 200 mm, išmetimo jėga: 33 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 950 mm, įrengimo aukštis: 500 mm, bendras ilgis: 5 650 mm, bendras plotis: 1 820 mm, bendras aukštis: 1 950 mm, bendras svoris: 9 700 kg, šildymo galia: 15,5 kW (21,07 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 570 mm, įrankio svoris: 600 000 g, Injection molding machines directly from the manufacturer! As the manufacturer KraussMaffei, we are offering you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the ideal entry-level solution for fully electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, user-friendly operation, and short delivery times. It is suitable for a variety of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency through a fully electric machine concept – Fast delivery times thanks to a base machine concept with a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functions CLAMPING UNIT • Clamping force kN 1600 • Maximum mold opening force kN 120 • Clear distance (h x v) mm 570 x 520 • Mounting plate size (h x v) mm 770 x 720 • Mold installation height min. - max. mm 200 - 500 • Opening stroke mm 950 • Maximum mold opening travel mm 450 • Ejector drive: electric • Ejector stroke mm 100 • Ejector force fwd/rev kN 33 / 33 • Ejector speed fwd/rev mm/s 300 / 300 • Maximum mold weight kg 1200 INJECTION UNIT • Screw diameter/type mm 50 / standard • Effective L/D ratio 20.2 • Injection pressure bar 1892 • Shot volume cm³ 393 • Shot weight at max. stroke for PS g 358 • Injection speed mm/s 200 • Injection flow rate cm³/s 393 • Screw drive/speed rpm 267 • Plasticizing rate (standard screw)4) g/s 36.5 • Nozzle contact force kN 42 ELECTRICAL PARAMETERS • Connected load kW 31.2 • Installed heating capacity kW 15.5 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 9.7 • Dimensions L x W x H m 5.65 x 1.82 x 1.95 ADDITIONAL FEATURES • Wear-resistant plasticizing system Guodpjugfw Dsfx Acujh • BluePower full insulation of plasticizing cylinder • Open nozzle • Air valve single (BWAP) • Pneumatic hot runner control, single circuit • Electrical interface for pneumatic cascade, 4-fold • Euromap interface handling E18 + E67 • Euromap interface (central computer) E67, E77 • Water manifold 4-fold • Electrical prep for hydraulic auxiliary unit • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression function • Graphic analysis package • Swiveling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras available on request. We look forward to your inquiry.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 Guedpfxoud H Dms Acujh - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037426, spaudimo jėga: 2 500 kN, varžto skersmuo: 60 mm, darbinio tūrio: 792 cm³, įpurškimo slėgis: 2,42 juosta, injekcijos svoris: 721 g, formos aukštis (min.): 250 mm, išmetimo jėga: 47 000 N, išstūmimo eiga: 200 mm, atvērimo eiga: 1 250 mm, įrengimo aukštis: 700 mm, bendras ilgis: 8 230 mm, bendras plotis: 2 320 mm, bendras aukštis: 2 210 mm, bendras svoris: 19 500 kg, šildymo galia: 292 kW (397,01 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 3 700 000 g, Injection molding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully electric PX series is the answer to your demand for greater flexibility with increasing productivity. Its robust mechanics, high-precision and dynamic drive technologies, as well as intelligent energy management, make the PX a reliable, productive, and efficient performer in any injection molding operation. Ergonomically optimized working height, maximum clearance beneath the clamping unit, and excellent accessibility ensure optimal operator convenience. The PX series impresses with flexibility throughout its entire service life. TECHNICAL SPECIFICATIONS: KM 251 / 2000 PX G02 (Order 38621992) CONTROL SYSTEM • MC6 with 20.5" TFT color display and multi-touch functionality CLAMPING UNIT • Clamping force kN 2500 • Max. mold opening force kN 375 • Daylight opening (h x v) mm 735 x 685 • Mounting platen (h x v) mm 1000 x 950 • Mold installation height min. - max. mm 250 – 700 • Maximum opening stroke mm 1250 • Maximum mold opening travel mm 550 • Ejector drive Hydraulic • Ejector stroke mm 200 • Ejector force fwd./bwd. kN 47 / 22.5 • Ejector speed fwd./bwd. mm/s 350 / 350 • Max. mold weight kg 3700 INJECTION UNIT • Screw diameter / type mm 60 / Standard • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 721 • Injection speed mm/s 125 • Injection flow cm³/s 353 • Screw drive / RPM 1/min 327 • Plasticizing rate g/s 82.8 • Nozzle contact force kN 57 ELECTRICAL PARAMETERS • Connected load kW 63.5 • Installed heating power kW 29.2 • Power supply V / Hz 400 / 50 WEIGHT AND DIMENSIONS • Net weight with control cabinet t 19.50 Godpjuaavzofx Acuouh • Length x width x height m 8.23 x 2.32 x 2.21 OPTIONAL EQUIPMENT • Enlarged mold opening stroke • Low-wear plasticizing unit (ZE23.03) • Hydraulic core pull 2+2-fold • Pneumatic core pull 1+1-fold • Air valves 1+1-fold • Pneumatic cascade 4-fold • Euromap interfaces E18, E67, E77 • Water battery 4-fold • Hot runner controllers 12-fold • Adaptive Process Control (APC) The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Sąlyga: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, tūrio srautas: 10,2 m³/val, įėjimo įtampa: 230 V, 2018 Vakuumpumpe RZ 9 S/N 100018206 Nennfördermenge: 10,20 Typ: RZ 9 Elektrischer Anschluss: 230 V Technische Daten Max. Saugvermögen 50 Hz (mbar): 8,9 m³/h Max. Saugvermögen 60 Hz (cfm): 6,0 cfm Endvakuum: 2 x 10⁻³ mbar / 1,5 x 10⁻³ Torr Endvakuum mit Gasballast: 1 x 10⁻² mbar / 0,75 x 10⁻² Torr Endpartialvakuum ohne Gasballast: 4 x 10⁻⁴ mbar / 3 x 10⁻⁴ Torr Wasserdampftoleranz: 40 mbar / 30 Torr Anzahl der Stufen: 2 Zulässiger Umgebungstemperaturbereich (Betrieb): 15 - 40 °C Zulässiger Umgebungstemperaturbereich (Lagerung): -10 - 60 °C Max. Auslassdruck (absolut): 1,1 bar Ölfüllmenge min./max.: 0,45 / 0,85 l Sauganschluss Kleinflansch KF DN 25 Auslassanschluss Kleinflansch KF DN 25 Nennmotorleistung: 0,30 kW Nenndrehzahl 50/60 Hz: 1500/1800 min⁻¹ Schutzart nach IEC 60529: IP 40 Abmessungen (L x B x H): 503 mm x 156 mm x 240 mm Gewicht: 24,8 kg Geräuschpegel (Schalldruckpegel) bei 50 Hz bzw. 1500 U/min/62% (VARIO)/1500 U/min (VARIO-SP)/12500 U/min (VACUU·PURE®): 52 dBA Gsdpfx Acew Rqx Djusuh NRTL-Zulassung: Nein

Sąlyga: labai geros būklės (naudotas), - nauja pagrindinė ašis smulkintuvui canter Linck V 25 tipo - kiekis: viena pora Godpfxjxnm T Ds Acusuh - puikios būklės

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, AGRE KOMPRESSOREN ADD 3000 (18) Air Dryer – 13 bar | 11.18 kW | 2012 For sale: industrial air dryer AGRE KOMPRESSOREN ADD 3000 (18), manufactured in 2012. This unit is the perfect solution for compressed air systems, providing effective moisture removal and improving air quality in pneumatic installations. Gujdov Dr I Ajpfx Acueh Technical data: ✅ Model: ADD 3000 (18) ✅ Manufacturer: AGRE KOMPRESSOREN GmbH (Austria) ✅ Year of manufacture: 2012 ✅ Weight: 550 kg ✅ Power: 11.18 kW ✅ Voltage: 400 V / 50 Hz / 3 phase ✅ Operating pressure: 13 bar ✅ Maximum pressure: 13 bar ✅ Maximum inlet temperature: 55°C ✅ Maximum ambient temperature: 45°C ✅ Refrigerant: R404A (10.5 kg) ✅ Country of manufacture: Italy Condition and usage: The dryer is in good technical condition and ready for operation.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 26 000 kg, Gamybos metai: 2001, mašinos/transporto priemonės numeris: PZEWL 160 R / HK, Machine Model: Double-column Eccentric Press Type: PZEWL 160 x 1 750 R / HK Serial Number: A01006-03 Year of Manufacture: 2001 Manufacturer: Müller Type: PZEWL 160 R / HK Year of Manufacture: 2001 Machine No.: A01006-03 Included: Tape feeding line, including: Combination straightener Müller type VR-IV-S Tape width: 400 mm Tape thickness: 7.0 mm Compact decoiler Technical documentation (DE) EU Directive Compliance: Machinery Directive 89/392/EEC (amended by 91/368/EEC, 93/44/EEC, 93/68/EEC) Low Voltage Directive 73/23/EEC Applied Harmonized Standards: EN 292 parts 1 and 2 EN 60204 part 1 EN 692 National Specifications: VBG 7n5.1 ZH1/456 ZH1/457 General Specifications: Height: approx. 4.70 m Width: approx. 3.41 m Depth: approx. 2.64 m Weight: approx. 26,000 kg Power consumption: 25 kW Technical Data: Max. press force at 6.7 mm before BDC: 1,600 kN Torque at 120 strokes/min: approx. 9,350 Nm Torque at 40 strokes/min: approx. 10,700 Nm Gap under slide guides: 1,750 mm Width between guides: 1,450 mm Distance table-ram (at max. stroke, upper position): 560 mm Work Table: Dimensions: 1,700 x 1,050 mm Thickness: 160 mm Godpfewmmzuox Acueuh Table opening: 1,200 x 240 mm T-slots: 7 pcs., width 22 mm, thread M20 Ram: Stroke: 8–160 mm Number of strokes: 30–120/min Height adjustment: 100 mm Clamping surface: 1,400 x 800 mm Counterbalance Pressure: For the machine: 3.60 bar For tool mass 100 kg: 0.32 bar Drive – Flywheel: Speed: 171–685 rpm V-belt size: SPB x 4500 mm Number of belts: 4 Coasting time at max. speed: 90 s Electric Motor: Power: 22 kW Type: B3 Speed: 1,500 rpm Voltage: 400/690 V Hydraulic Clutch: Type: 0-123-010-80-001-846 Operating pressure: 60 bar Hydraulic power unit output: 2.2 kW

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Džiovintuvas: Gamintojas: Ryser GmbH Šveicarija Gusdpfx Aju Rcz Dscuoh Tipas: BAFAG ATU 35 Galia: 3 kW Pagaminimo metai: 2015 Medžiagų transportavimo įrenginys: Gamintojas: Labotek Tipas: PGT 4-I/MV/MR/P1 Modelis: 101501 Pagaminimo metai: 2016 Galia: 0,4 kW

Sąlyga: naudotas, Gamybos metai: 2016, SVARBU: Šio įrenginio pardavimas ir pristatymas griežtai ribojami tik tiems klientams, kurių registruota buveinė ir pristatymo adresas yra Europos Sąjungoje (ES). Pristatymas gavėjams už Europos Sąjungos ribų yra neįmanomas. Gjdpjw Tidqefx Acueuh Įrenginio duomenys – PITTLER • Gamintojas: Pittler • Modelis/tipas: LP03B • Serijos Nr.: 2198 • Pagaminimo metai: 2016 • TAR Nr.: 12244247 • Įrenginio svoris: 19 500 kg • Gamybos šalis: Vokietija • CE žymėjimas: Taip • Valdymo sistemos gamintojas: Pittler T&S GmbH • Valdymo sistemos tipas: plokštė PLS/G-RZ 10 Elektros duomenys: • Maitinimas: 3 fazių AC 400 V • Dažnis: 50 Hz • Apšvietimo įtampa: 42 V • Valdymo įtampa: 230 V AC / 24 V DC • Valdymo saugiklis: 25 A • Maks. kabelio ilgis iki įrankio galvutės: 10 m • Aušinimo skysčio prijungimas: jungti pagal objekto reikalavimus

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 60 000 aps./min, įvesties srovės tipas: Oro kondicionierius, stalo ilgis: 320 mm, stalo plotis: 560 mm, paskutinio kapitalinio remonto metai: 2025, garantijos trukmė: 12 mėnesiai, darbinis plotis: 560 mm, darbinis ilgis: 320 mm, ašių skaičius: 3, The compact tabletop version LOW MINI has been specially developed for depaneling small-format series, small batch series of large format, and cost-conscious production. PCB materials with residual web connections can be separated quickly and efficiently up to a maximum size of 320 mm x 560 mm. The separation process is fully servo-controlled on all axes, with the milling drive mounted from above. The straightforward and user-friendly changeover of the working area from small (320x280mm) to large (320x560mm) format is a particular highlight of this machine. • Short cycle times due to shuttle operation • X/Y axes with linear motor technology • Product fixation by pin system • Flexible handling • PCBs with residual web connections • Servo-driven milling spindle adjustment • Extraction unit • User-friendly operation • Optimal price-performance ratio Gedpfoxmfdxsx Acujuh Manual depaneling – flexible and cost-effective The manual depaneling concept offers significant advantages in terms of flexibility and costs. Mid-sized production volumes can be depaneled quickly and with minimal dust using the LOW MINI. Dual loading via linear motor technology comes as standard; a single-shuttle operation is available to increase the working area. Ease of maintenance and operator-friendly design, combined with an excellent price-performance ratio, facilitate efficient operation and make investment in this depaneling machine economically attractive. Axis speed: 160 mm/s Repeatability: 0.02 mm Separation accuracy: 0.1 mm Shank tool: 0.8 - 2.4 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Parduodama automatinė šilkografijos karuselė MHM SPiQ 20 45×55 (SYNCHROPRINT iQ OVAL compact) su iDS (individual Drive System) sistema. Gamybos data: 2023 m. sausis. Gamintojas: MHM – Machines Highest Mechatronic GmbH (Austrija) Modelis: SPiQ 20 45×55 Tipas: 1450IQ Pagaminimo metai: 2023-01 Energijos tiekimas: 3×400 V, 50/60 Hz Galia: 7,4 kVA Suspausto oro poreikis: apie 690 l/min, 0,8 MPa (8 bar / 116 psi) Gujdpfxexb Avzs Acush Specifikacija (pagal užsakymą): • Spaudos plotas: 45×55 cm • Spausdinimo stočių skaičius: 13 • Flash cure stočių skaičius: 4 Komplektacija: • 20× aliumininės paletės su išpjova kaklui: 52×80 cm • 13× rakelių (squeegee blade) 50 cm / 65 shore • 13× flood blade (žema) 50 cm • 1× MHM Pro Iron – 40 cm Bendri matmenys: 3,5 m × 11 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, • Travel distances: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 530 with HR 410 handwheel Gedpfxexmr Uwe Acuouh • NC rotary table for multi-side machining, 1600 mm x 1250 mm • 1-axis NC universal boring and milling head for simultaneous and positioning operation (A-axis, 45°-axis) • Motor spindle, max. 7,000 rpm, SK 50, 530 Nm spindle torque • Tool change system SK 50 / 40 slots for tools up to 400 mm length • Chip augers in X-axis for optimal chip removal • Chip conveyor (hinged belt conveyor), make: Knoll, transverse discharge, front ejection • Coolant supply 950 l, make: Knoll • External/internal air at the spindle • ICS 60 bar for deep hole machining • Operating mode 4 • Fully enclosed cabin with safety glass sliding doors, optimized for crane loading • Split sliding doors at the front • Split sliding doors on the operator side • Wireless measuring probe RMP 60 • incl. wash gun • Short delivery time by arrangement, subject to prior sale • Used machine • Z-axis ball screw renewed in September 2023 incl. bearings • Optional: fixators and anchor rods • Optional: commissioning/installation • Optional: transport

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 45 h, mašinos/transporto priemonės numeris: 202023-078, Multifunctional CAM cutting system utilizing pure waterjet technology—no abrasives (waterjet cutting machine / water cutting system). 2 cutting bridges with 2 cutting heads including Z-axis 1 head for 2D cutting 1 head for 2D cutting Designed for processing foam, plastics, technical textiles, and other flat, flexible, non-metallic materials. Maximum feed height: 140 mm Cutting area (X x Y): 2850 mm x 2750 mm Protection class: IP54 Including BFT 40.22 high-pressure pump (approx. 900 operating hours) Godpfx Aewrn Iyjcusuh (Product image for reference) The machine is CE certified.

Gamybos metai: 2024, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0963, Orkaitė, naudojama sinteravimo pastos džiovinimui ir vėlesniam atspausdintų puslaidininkių aušinimui Gedpfx Acexm Ri Houjuh

Sąlyga: naudotas, Gamybos metai: 2005, Komplektą sudaro: (1) Gumos juostelės aplikacijos sluoksnių pjaustytuvas Gujdsxf Apcopfx Acush Techninė informacija: Daugiau informacijos rasite pardavimo brošiūroje.

Sąlyga: geras (naudotas), Gamybos metai: 2017, Götzinger Maschinen GmbH » Wagbachstr. 4 - 68753 Waghäusel 2 Konzept: Die gehobelten Werkstücke werden auf das Querschubförderband gelegt, das als Zuführmagazin dient. Jeweils zwei Werkstücke werden im Takt eingezogen und bearbeitet. Eine auf einem Schlitten montierte Frässpindel fräst nacheinander den Radius. Eine Sägevorrichtung trennt die Teile nach dem Fräsen. Ein Greifer hält das Teil fest und führt es anschließend durch die Schleifeinheiten. 1 automatische Kantenfräsmaschine: - 2 x Zuführmagazine als Querschubförderer mit 4 Einzugsbändern Holzlänge min. 600 mm, max. 1200 mm Guodpfx Acjw I A Rasuoh - Grundgestell in stabiler, geschweißter Bauweise aus Profilstahlrohr - Fräsaggregat mit - 1 Frässpindel, 9.000 U/min, Motor 2 kW, Frequenzumrichter - X-Z-Schlitten mit Linearführung, Kugelgewindespindel, NC-Servoantrieb - (Beide Spindeln fahren synchron entlang der Kontur) - | Sägevorrichtung mit | Sägeblatt d = 300 mm, 3.500 U/min, 2 kW - 1 Greifer für Werkstücke, der die Teile am Sägepunkt aufnimmt und anschließend durch die Schleifeinheiten führt. - 4 Schleifeinheiten mit Schleifmotor 1 kW, ca. 800 U/min, manuell einstellbar - Elektro-pneumatische Steuerung über PLC B+R mit 10" Touch-Panel, Pneumatik von Festo - Maschine komplett mit 2 Absaugstutzen dm 120 mm, ohne Fräswerkzeug, ohne Schleifscheibe, mit 1 Sägeblatt und 1 Fräser - Vorschubachse rechts/links, separat aufgebaut mit 2 NC-Achsen für Werkstückzufuhr - Bürststation: Je 2 Bürsten auf NC-Schlitten, programmierte Bewegung an das Werkstück – passend zu den Dimensionen - Fehlererkennung: Fehler müssen am Werkstück mit Kreide markiert und korrekt eingelegt werden. Ein Sensor erkennt die Kreide-markierung und schleust das Werkstück über eine Ausschleusklappe aus. Der Prozess läuft weiter, nur die fehlerhaften Teile werden nicht gebürstet. - Zentralschmierung automatisch gesteuert über Bedienpanel - Positionsmesssystem in der Spannung: Bei Abweichungen kompensiert die Steuerung den Dimensionsunterschied. - Abtransport der Abfallteile über Förderband Fertigholzmaße min. 32 x 16 max. 64 x 62 Fertigholzlänge min. 32 max. 320 Rechteck- und Rundstäbe bearbeitbar Standard-Holzlänge 1200 oder 600 mm / nicht mischbar!!!

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 12 mėnesiai, įėjimo įtampa: 240 V, matavimo diapazonas X ašis: 250 mm, matavimo diapazonas Z ašis: 320 mm, bendras svoris: 100 kg, padavimo ilgis X ašis: 250 mm, padavimo ilgis Z ašis: 320 mm, Įranga: Tipinė plokštelė prieinama, Modulinė pagrindinė kontūrų matavimo sistema su galimybe plėsti, Z matavimo kryptis žemyn. Papildomos funkcijos, galimos išplėsti programinės įrangos atnaujinimu: - Nemokamas paleidimas ir apmokymai 200 km spinduliu - Matavimo krypties perjungimas aukštyn/žemyn - Šiurkštumo tikrinimas - Motorizuotas Y ašies stalelis - QR kodo skaitytuvas (antgalių ir etaloninių detalių identifikavimui) - Duomenų eksportas į QS-Stat (dfq duomenys) - Dominuojantis bangavimas Komplektacija: - Visa mechanika su Y staleliu (eigą 17 mm) - Integruotas valdiklis Gjdpfxoxgqlhe Acujuh - PC W11/64Bit; 24" TFT plokščias ekranas - ConturoMatic programinė įranga; naudojimo instrukcija - Atspari dulkėms danga, tvirta, atspari vandeniui Techniniai duomenys: Matavimo diapazonas X 250 mm Matavimo diapazonas Z 320 mm Skiriamoji geba 1 nm Matavimo sistemos optinės inkrementinės Sistemos tikslumas ±(0,9µm+L/100)µm* [L=mm] Jutiklio spaudimo reguliavimas Matavimo greitis 0,1–3,0 mm/s, automatinis optimizavimas Pozicionavimo greitis iki 25 mm/s Stalo apkrova 35 kg Preciziniai bėgeliai iš kietos uolienos Svoris 95 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, darbinis plotis: 5 040 mm, Lenkimo kampas (maks.): 135 °, plieno lakšto storis (maks.): 1 mm, galinis atmušas: 670 mm, Pagrindinis modulis darbo ilgis 2020 mm + prailginimo modulis 3020 mm Talpa 1,25 mm ST 37 esant 400 N/mm² Gedop R I H Uspfx Acuouh Pratęsus iki 5040 mm darbo ilgio, darbo talpa sumažėja iki 1,00 mm Įskaitant gylio ribotuvą 670 mm Įskaitant priekinį ribotuvą 400 mm Atidarymo plotis 60 mm

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts or, for example, nameplates. Due to its compact design, the system is very practical and can be used almost anywhere. The device is very easy to operate without any programming knowledge. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior configuration. Furthermore, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20-watt fiber laser (Optional: 30-watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110mm - Marking software EZCAD in German / English - Pilot laser (for simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures Guodpfxow Et Ilo Acuoh - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, The universally deployable laser marking system LAS 28 by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without advanced programming knowledge. The software can automatically sequence serial and part numbers after prior configuration. Additionally, it can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options such as side outriggers for marking long parts are available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system Guodsv Sybyjpfx Acueh • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – for automatic determination of focal distance • Signal tower to indicate operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Maximum component height approx. 270mm • Electrically adjustable Z-axis (working plane adjustment) • Aluminum profile frame • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (L x W x H) • Weight: approx. 80 kg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras svoris: 14 kg, bendras plotis: 245 mm, bendras ilgis: 420 mm, bendras aukštis: 450 mm, įėjimo įtampa: 230 V, tūrio srautas: 420 m³/val, Įranga: važiuoklė, Fume extraction unit with remote control and extraction hose Air inlet interface: ρm flange Max. power: 300W Air velocity: 24 m/s Filtration efficiency: 0.3 µm / 99.97% Noise level: 59 dB Extraction hose length: 1.5 m, inner Ø 30 mm Gedpfx Acounh Nmeuouh System airflow: approx. 420 m³/h Dimensions: L420 x W245 x H450 mm Weight: 14.0 kg Application: This product is suitable for environments subject to air pollution, such as fumes, unpleasant odours, dust, toxic and harmful gases generated during soldering, laser marking and engraving, printing, etc. • Extraction unit for workplace use • Separate, replaceable fine dust pre-filter M5 • Large HEPA H13 filter area, 2.4 m², for optimum particle filtration and extended filter life • Activated carbon for effective gas purification • Portable extraction unit for flexible placement directly under or next to the workstation • Simple filter replacement • Variable power control with 10-step, percentage-based speed adjustment • Health protection through electronic filter monitoring and filter alarm • Long service life due to high-quality EC blower • Fast, simple and stable installation thanks to Easy-Click system