Eitec Gmbh pirkti naudotą (70 668)

Gamybos metai: 2015, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Technical data of the feed bunker with hydraulic moving floor and bag opener: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feed bunker with bag opener was previously used at a major recycling facility, where bagged waste was tipped into the bunker by wheel loaders. The bag opener was used to open the sacks and meter the waste for further processing. The system functioned perfectly up until disassembly and was replaced by a larger unit with higher throughput capacity. Remarks: Hfjdpsu R Rtbefx Acuon The machine is currently undergoing refurbishment in our workshop. The photos show the unit during its current overhaul phase, therefore the system is not yet fully reassembled. Upon completion of the refurbishment, expected by February 2025, the machine will be test run under operational conditions without material input. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection by appointment is possible. We accept no liability for technical data or possible errors.

Gamybos metai: 2016, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Usable height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled items to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the wash solution in the tank is heated. With the lid closed, the basket rotates at a constant speed around its own axis. The pump units draw the wash solution from the wash tank and deliver it through six stainless steel spray pipes equipped with overlapping flat jet nozzles. The items to be cleaned are thoroughly sprayed from all sides with the hot solution as the basket, driven by the spray jets, rotates evenly. After the cleaning process is completed, the unit switches off automatically. Advantages: - 1 horizontally arranged pump - Output: 70 L/min - 3 three-dimensional spray pipes made of stainless steel - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating wash basket made of stainless steel, driven by water jet - Steam extraction - Perforated sheet with stainless steel filter inlets above the wash tank - Water shortage protection Hjdpfx Acoxiwc Ssujfn

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, spalva: balta, krovinių skyriaus plotis: 6 000 mm, krovimo vietos ilgis: 6 000 mm, krovos erdvės aukštis: 2 000 mm, NEW EQUIPMENT Our available sizes: Width x Length → 6m x 6m → from €1,299 → 8m x 6m → from €2,099 → 12m x 8m → from €3,699 → 10m x 12m → from €4,599 → 12m x 12m → from €10,745 ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT OFFER ☆ INCLUDES STRUCTURAL ENGINEERING REPORT (Germany) ☆ INSTALLATION AVAILABLE ️ → Genuine 750 g/m² PVC tarpaulin → more durable than standard products on the market ️ → Extra sturdy and tear-resistant with fabric reinforcement ️ → UV resistant ️ → 100% waterproof ️ → Extra strong, galvanized tubing for maximum stability ️ → Suitable for year-round use ️ → German customer service and support during purchase and assembly ️ → Snow load: 130 kg/m² (arch spacing 1m) and 70 kg/m² (arch spacing 2m) ️ → Wind load: Wind zone 4 (arch spacing 1m) and wind zone 2 (arch spacing 2m) ️ → Includes ground spikes, concrete anchors, and all other small components ️ → Spare parts guaranteed ️ → 5-year warranty on correctly installed PVC cover ️ → 10-year warranty against corrosion on the steel frame ► Most models available for immediate delivery ► Colours: green or white ► Includes German structural calculations ► Doors on both gable ends ☏ Call us! We will gladly provide you with a non-binding quote with our best price guarantee. THE IDEAL ALTERNATIVE TO PERMANENT STRUCTURES Optimal protection from wind, sun, rain, hail, and snow! Usually permit-free (unlike hall-type buildings made of wood, steel, or sheet metal) No foundation required High stability and structural safety (inspected by a German engineering office) Decades of use: high quality, warranty, and spare parts availability Robust, corrosion-free frame Various shapes, colours, and sizes VERSATILE APPLICATIONS → In agriculture, forestry, industry, trade, and for private use → Storage space for goods, materials, or machines → Garage/carport for trucks, motorhomes, or boats/yachts → Workshop in the lightweight hall → Shelter on construction sites → Pasture tent or shelter for livestock → Barn for straw, hay, and firewood → Greenhouse for plants ! Prices include structural engineering ! Delivery and installation available *Illustrations may vary · Prices and colours may differ · Subject to change Hfjdpfx Acsudwgfoujn · For an exact price, please request a non-binding quote · Available while stocks last · Offer non-binding

Sąlyga: naudotas, Gamybos metai: 1997, Parduodama emaliuota krosnis, matoma nuotraukose. Jei turite klausimų, mielai atsakysime. Hjdjxlq Elopfx Acujfn

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1995, used gable-top packaging machine for filling milk cartons Hedpfx Acohx D E Deuofn 1,000 packs/h 0.25 L / 0.5 L / 1.0 L for cartons without screw caps

Sąlyga: naudotas, Gamybos metai: 2005, veikimo valandos: 6 650 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 600 mm, Y ašies eiga: 1 550 mm, Z ašies eigos atstumas: 400 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 20 m/min, nominali (akivaizdi) galia: 25 kVA, valdiklių gamintojas: Bosh Rexroth, ruošinio aukštis (maks.): 290 mm, ruošinio svoris (maks.): 500 kg, stalo plotis: 1 300 mm, stalo ilgis: 4 000 mm, sukimosi greitis (min.): 1 200 aps./min, sukimosi greitis (maks.): 24 000 aps./min, bendras svoris: 5 500 kg, veleno greitis (min.): 1 200 aps./min, ašies variklio galia: 10 000 W, veleno nosis: HSK63F, ašies skaičius: 1, įrankių magazino lizdų skaičius: 15, įrankio ilgis: 240 mm, įrankio svoris: 6 000 g, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, ArtisX6 – SHORT DESCRIPTION 1 spindle motor with 10 kW power; constant power range from 12,000 to 24,000 rpm; operating range: 1,200–24,000 rpm. Tool holder: HSK63F. Axis travel ranges: X = 4,600 mm, Y = 1,550 mm, Z = 400 mm, B-axis = 180°, C-axis = 360° Axis rapid traverse speeds: X/Y plane = 85 m/min; Z = 20 m/min Clearance beneath gantry: 290 mm 1 automatic carousel tool magazine, 15 positions. Max. tool length: 240 mm, max. tool weight: 6 kg Drilling aggregate in L layout, 2.2 kW power, spindle speed 4,500 rpm, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4,000 x 1,300 mm. 2 x 4 pneumatically retractable location stops (Ø 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table divided into two stations for alternating operation 1 vacuum pump with a capacity of 250 m³/h and a buffer tank of 500 liters Machine safeguards (EU standard): BUMPER collision system (no mats, light barriers, etc. required) Control system: Bosch Rexroth PNC, industrial PC BTV 16, Pentium III processor, 256 MB RAM, 10 GB HDD, network card Profibus SERCOS drive control system Data input: USB stick, local network Operating system: Windows 2000. ProEmbSys Touchscreen display CAD/CAM software: Alpha/CAM Mobile control console with handheld control panel Remote diagnostics Hodpfx Aswh Aidscujfn Interpolation: 5-axis linear, 2½D circular Connected load: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% operational. Storage location: Northern Poland.

Sąlyga: naudotas, Technical Data PaperSpike 2 G: Manufacturer: Grumbach und Petermann GmbH Model: 2500 Year of manufacture: 2019 Hfodpfxju Tg Sij Acuen Dimensions of acceleration belt: 3,000 x 2,980 x 600 mm (L x W x H) Weight: 1,100 kg Dimensions of PaperSpike sorting unit: 2,480 x 2,982 x 1,805 mm (L x W x H) Weight: 3,100 kg Dimensions of complete PaperSpike 2G: 5,450 x 3,480 x 1,805 mm (L x W x H) Weight: 4,600 kg Dimensions of paper discharge conveyor: 3,400 x 1,200 x 650 mm (L x W x H) Weight: 400 kg Electrical equipment for the entire system: Voltage: 380 – 420 V Connected load: 9.5 kW Current consumption: 20.34 A Operating principle: The material is fed to the acceleration belt as dry and thin as possible, preferably as a single layer, and distributed evenly across the entire width. The sorting roller with spikes pulls the mixed paper from the chute; cardboard is impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls from the chute into a paper bunker or onto a discharge conveyor. The impaled cardboard is knocked off the sorting roller by the striker shaft and then falls onto the cardboard discharge belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, feed material characteristics, and machine settings, each unit can process between 10 and 12 tonnes per hour. Scope of delivery: 2 units PaperSpike 2G incl. 2 geared motors 2 units acceleration belt incl. geared motor 2 units paper discharge belt incl. geared motor (The cardboard discharge belt is not for sale and therefore not included in the scope of delivery!) Two lines are available for sale. Depending on customer preference, either one unit or both units can be sold together. The sales price always refers to one unit. Remarks: The systems are expected to be dismantled by the end of October and will then be ready for loading. Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is available. Inspection by appointment is possible. We accept no liability for the technical data or any potential errors.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Talpa: 300 l, darbinė padėtis 0–40 kg: 22° nuo horizontaliosios, darbinė padėtis 40–260 kg: pakreipta 45°. Pagrindinis pavaros tipas: RF 73DT 80N4 SEW (Siri 52x72x8BA), galia: 0,75 kW, konstrukcija: B 5, vardinė srovė: 3,8/2,2 A, padėtis: KLK 90°, įtampa: 220/380 V, 50 Hz, plačių ribų, apsisukimai: 21–1400/min, sandariklis: Kaco Ø 50 aukštas, D-sandariklis: SV-pilnas. Pakreipimo pavaros tipas: KA76 TR42 DT71 D4 BM SEW, tuščiavidurio veleno skersmuo: 50 mm, galia: 0,37 kW, konstrukcija: H 4A, vardinė srovė: 2,25/1,3 A, padėtis: KLK 0°, įtampa: 220/380 V, 50 Hz, plačių ribų, apsisukimai: 1,6–1400/min, stabdžio momentas: 5 Nm, stabdžio įtampa: 220 V, lygintuvas: BG 1,5. Su naudojimo instrukcija ir dokumentacija. Galima apžiūrėti vietoje. Hedpfx Asxg Ri Hecuofn

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Daugiapalvės ekranas lengvam nustatymui Įpakuojamų produktų kiekio išankstinis nustatymas Integruotas bendras produktų skaitiklis (su atkūrimo parinktimi) Ritės pakeitimas per mažiau nei minutę Sandarinimas pėdų pedalu, automatiškai arba rankiniu būdu Konvejerio sistemos automatiniam maišų užpildymui – pagal užklausą Techniniai duomenys Didžiausias maišelio ilgis: 450 mm Didžiausias maišelio plotis: 250 mm Didžiausias maišelio storis: 0,04–0,1 mm sluoksniui Pakavimo greitis: iki 25 vnt./min. Maitinimo įtampa: 1 fazė, 220 V, 50 Hz Bendra galia: apie 1 kW Mašinos svoris: apie 70 kg (su spausdintuvu) Mašinos matmenys: apie 670 × 665 × 860 mm Hedpoxlzr Ajfx Acusfn Spaudos plotas: 53 × 75 mm Maišelio tipas: grandininiai maišeliai ritinėliuose

Sąlyga: naujas, bendras svoris: 33 400 kg, tuščias svoris: 3 400 kg, didžiausias leistinas svoris: 30 000 kg, padangos dydis: 559x300, Gamybos metai: 2025, TPW 30 VL - LK Turntable Steering on Front Axle Trailing Axle Rigid Length: 6000 mm Width: 2200 mm Drawbar with safety locking device and adjustable height Hfedpohbmu Iefx Acusn Wheels: 559x300 solid tyres with steel rims 5 load securing stops per longitudinal side Paint finish RAL 5010 Blue Transport floor: 40 mm recessed wooden floor, bolted #HeavyDutyTransport #In-plant Transport Systems #HeavyDutyTrailers 6-100 Tons #HeavyDutyTrailers from 3 to 100 Tons #HeavyDutyTransport Platform Cart #Platform Heavy Duty Trailer #All-Wheel Steering #Transport Cart

Gamybos metai: 1992, Sąlyga: naudotas, Plate heat exchanger for milk processing Hfjdpfx Aoh Eulgecuen

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 8 052 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 875 mm, Y ašies eiga: 1 250 mm, Z ašies eigos atstumas: 1 345 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 24 m/min, padavimo ilgis X ašis: 1 875 mm, padavimo eiga Y ašimi: 1 250 mm, padavimo ilgis Z ašis: 1 345 mm, X ašies padavimo greitis: 24 000 m/min, Y ašies padavimo greitis: 24 000 m/min, padavimo greitis Z ašis: 24 000 m/min, sukimo momentas: 3 430 Nm, ruošinio svoris (maks.): 4 000 kg, bendras aukštis: 4 950 mm, bendras ilgis: 7 029 mm, bendras plotis: 5 200 mm, sukimosi greitis (min.): 10 aps./min, sukimosi greitis (maks.): 10 000 aps./min, bendras svoris: 51 200 kg, veleno greitis (min.): 1 aps./min, veleno greitis (maks.): 500 aps./min, atstumas nuo stalo centro iki veleno galo: 1 600 mm, ašies variklio galia: 37 000 W, veleno nosis: A2-11, įrankio ilgis: 300 mm, įvesties srovės tipas: Oro kondicionierius, tekėjimo skersmuo: 1 450 mm, sukimosi skersmuo virš skersinio stumduko: 1 250 mm, ašies skersmuo: 160 mm, strypo praėjimas: 160 mm, įvorės išorinis skersmuo: 500 mm, tvirtinimo įvorės skylė: 160 mm, padavimo jėga X ašis: 20 000 N, padavimo jėga Y ašis: 20 000 N, padavimo jėga Z ašyje: 25 000 N, frezos veleno ilgis: 300 mm, quill skersmuo: 160 mm, plunksnos brūkšnys: 250 mm, šilko eigos atstumas: 250 mm, veleno skylė: 160 mm, sūpynės skersmuo virš skersinio stumdomo: 1 450 mm, sūpynės skersmuo virš skersinio vežimo: 1 250 mm, sūpynės skersmuo virš viršutinio slankiklio: 1 100 mm, tekinimo skersmuo virš slankiojančio stalo: 1 300 mm, tekėjimo ilgis: 1 600 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, For sale: Mazak Integrex e-1250 V/8 mill-turn center with extensive accessories and a Mazak Palletech High Rise (800B) automation system. The system combines milling, turning, and automated pallet handling – ideal for machining complex workpieces in a single setup. _____ Technical Specifications – Integrex e-1250 V/8 • Travel: X = 1,875 mm, Y = 1,250 mm, Z = 1,345 mm • Rotary table: Ø 800 mm, 500 rpm • Tool magazine: 120 stations (CAPTO) • Control: Mazak SmoothX with 5-axis capability • Operations: Milling, turning, drilling, tapping, 5-axis simultaneous machining Hsdpfexgu E Eex Acuofn • Coolant system: High-pressure up to 70 bar, Mayfran belt filtration system, oil skimmer, coolant guns • Accessories: Tool Eye, Renishaw probe, HD camera system, overload monitoring _____ Software & Control Package • Synchronous tapping (G84.2 / G84.3) • Engraving and re-cutting functions • Cylindrical & polar interpolation (EIA) • Tool length & radius compensation (5-axis) • Spline fine interpolation (EIA) • Mazatrol turning/milling functions • MT Connect adapter for network integration _____ Automation – Palletech High Rise (800B) • Pallet transport system (mixed type) • Expandable high-bay solution for flexible production • Ideal for series and mixed-production environments • Note: Pallets to be procured separately _____ Special Features • Complete documentation (digital & paper) • All-in-one package: Machine + automation + accessories _____ Your Advantage • "Done in One®" concept: All operations in a single setup • Productivity: 5-axis machining + turning + pallet automation • Flexibility: From single parts to series production • Efficiency: Automatic pallet changer & integrated measuring technology 📍 Location: Southern Germany 👉 Price and delivery conditions upon request

Sąlyga: naudotas, Technical Data – IFE Cascade Screens (Vibrating Waste Screens): Hodpou Tg Rrofx Acuefn Manufacturer: IFE Aufbereitungstechnik GmbH, Austria Model: SM 2400 x 5000 F – UW30 Year of manufacture: 2009 Drive motor: 22 kW Rated current: 43 A Overall screen dimensions: 5,000 x 2,400 mm (L x W) Single screen segment dimensions: 950 x 800 x 130 mm (L x W x H) Screen aperture size: 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments): 400 mm Maximum amplitude: 18.5 mm Weight: approx. 6,600 kg Areas of application: The waste screen is suitable for use in systems for sorting domestic waste, commercial and industrial waste, paper and cardboard, scrap metal, and electronic scrap. Its key advantages are clog-free screening even with the most challenging input materials, high throughput rates, no formation of braids with oversize material, loose discharge of oversize across the entire screen width, and no downtime for screen cleaning. Note: The screen plates / screen segments have been covered with steel plates without screening function over time for use in a paper sorting plant. The steel plates are only spot-welded and can be removed again. Notes on the complete plant: Technical documentation for the machine is available in German only. Inspection of the plant is possible by appointment. We do not assume liability for the technical data or any possible errors.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, The Mercedes among cable stripping machines! The PR3 Evolution is manufactured entirely at our facility near Ulm. All purchased components come from renowned manufacturers such as Siemens (electrical), Rittal (control cabinet), KEB (gear motor), and Nachi (ball bearings). A machine truly MADE IN GERMANY! Robust, reliable, and safe. The PR3 Evolution complies with the EU Machinery Directive 2006/42/EC Annex II A. Technical data: Motor power: 4 kW / 380 V Cutting speed: 44 m/min Working range: 1.5 mm² – Ø 90 mm Weight: approx. 700 kg Dimensions: W 1000 x L 1800 x H 1520 mm Paintwork: Hedpfx Acsugt Dxeuofn RAL 7037 / 7035 Technical modifications reserved. 40 years of experience and over 500 machines sold worldwide speak for themselves.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: VK3542, statybos plotis: 4 300 mm, darbinio aukščio: 300 mm, darbinis plotis: 4 300 mm, oro slėgis: 6 juosta, darbo diapazonas: 4 300 mm, Parduodami 2 įrenginiai, sudaryti iš įstiklinimo presų su 0°-10° nuolydžio reguliavimu, portalo sistemos su važiavimo taku: 7,7 m x 2,8 m, su grandininio keltuvo ir vakuuminio siurbimo įrenginiu Vacu-Master-Window, kurio keliamoji galia 300 kg (iš SCHMALZ vakuuminės technologijos). Įstiklinimo ir kontrolės blokas su pneumatiniu 10 laipsnių pasukimu, nuolatinė aukščio reguliacija 500 mm, plieniniai ritinėliai D=50x206 mm, aukštis 260+100 mm, spaudimo aukštis 2200 mm, spaudimo plotis 3400 mm, su pneumatiniu atlenkiamu presavimo balkiu ir pneumatine pasukimo svirties fiksacija, dešinys presavimo balkis juda, spaudimo plokštės plotis #150 mm#, svoris 460 kg, dažyta RAL7040, ilgis 4300 mm, plotis 1050 mm, aukštis 2500 mm. Hfsdpfjxmtqaex Acuon

Sąlyga: naujas, Gamybos metai: 2025, TPW 30 AL - AS su visų ratų vairavimu, vairo svirtimi, padangos 559x300. Transportavimo dugnas iš 40 mm storio maumedžio (douglasie) medienos. Matmenys: ilgis 4000 mm, plotis 2000 mm. Traukimo sija 1600 mm su 40 mm akimi ir kritimo apsauga su aukščio reguliavimu. Dažymas RAL 2000. #Vidiniai transporto sistemos #Sunkiųjų krovinių priekabos 6–100 tonų #Sunkiųjų krovinių priekabos nuo 3 iki 100 tonų #Sunkiosios platformos transportavimo vežimėliai #Platforminės sunkiųjų krovinių priekabos #Visų ratų vairavimas #Transportavimo vežimėlis Hfedpjhbmukofx Acujn

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Aliumininė dėžės antstatė Iveco 70 C su 3 ritininiais užraktais, 3000 litrų talpos nerūdijančio plieno vandens baku su 2 valymo liukais. Dėžė ir bakas yra visiškai sumontuoti ant rėmo Iveco Allrad 70C automobiliui. Hedpfx Aexlkpkjcuefn

Sąlyga: geras (naudotas), Gamybos metai: 1996, Rumed Tipas 3300 Šaldomas Inkubatorius • Gamintojas: Rubarth Apparate GmbH, Laatzen (Vokietija) • Tipas: 3300 • Serijos numeris: 72258.4 • Pagaminimo metai: 1996 • Galia: 1,0 kW • Darbinė įtampa: 230 V / 50 Hz • Srovės stipris: 4,4 A • Šaltnešis: R134a • Užpildymo kiekis: 0,99 kg • Leistinas darbinis viršslėgis: 18 bar • Pagaminta Europoje, CE žymėjimas Aprašymas ir naudojimo sritys: RUMED Tipas 3300 yra profesionalus šaldomas inkubatorius, skirtas laboratoriniam naudojimui. Puikiai tinka: • Mikrobiologinėms kultūroms • Ilgalaikiam mėginių saugojimui • Klimatizuotiems stabilumo bandymams • Moksliniams tyrimams ir plėtrai Vidiniai matmenys (P/G/A): 575/550/510 mm Pastaba: Išsamiems techniniams duomenims ir naudojimo rekomendacijoms primygtinai rekomenduojame susipažinti su originaliais duomenų lapais arba kreiptis tiesiogiai į gamintoją. Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Hfodoxl Awgspfx Acujn Tarptautinio pristatymo kainos – pagal užklausą!

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily selected using the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Maximum pipe length: 6000 mm - For round pipes up to max. OD = 150 mm - For square tubes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight: 150 kg - 4-jaw chuck - Side loading possible, protected by light curtain - Fully automatic cutting process - Industrial PC control with 12" touch display - Data import via USB and LAN - Power supply: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm Hfjdpjg Dvdcofx Acusn - Weight: approx. 800 kg Made in Germany The images show an older, larger machine.

Sąlyga: naujas, Gamybos metai: 2025, TPW 8000 AL - As Industrial Heavy-Duty Transport Trailer Length 6000 mm, Width 2000 mm Hsdpfx Acohbicweujfn Payload 8000 kg, All-wheel stub axle steering, 30 mm wooden transport deck, drawbar 1150 mm with 40 mm pin, bandage tires 425x150, painted in RAL 2000, double-acting wheel chock, 6 stop blocks per side for securing the load.

Sąlyga: naujas, Gamybos metai: 2025, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed via the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6000 mm - For round pipes up to max. OD=220 mm Hsdpfegu Nmhox Acuefn - For square tubes up to max. 152.4 x 152.4 mm (6" x 6") - Maximum pipe weight: 250 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting cycle - Industrial PC control with 12" touch display - Data import via USB and LAN - Machine power supply: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 1000 kg Made in Germany The images show an older machine.

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, valdymo tipas: PLC valdomas, automatizacijos lygis: pusiau automatinis, Vamzdžio skersmuo (maks.): 60 mm, mandrilo ilgis: 6 000 mm, paskutinio kapitalinio remonto metai: 2025, Įranga: CE žymėjimas, avarinis stabdymas, Mandrel Bending Machine S6006 ----- For the production of precise pipe geometries with bending radii up to 1.5XD → Maximum bending capacity pipe 60.3 x 4 mm (400 N/mm²) → Maximum bending capacity pipe 60.3 x 2.6 mm (stainless steel) → Total connected load 5 kW → Pipe feeding length 6 m Robust and durable steel construction with a rigid, force-locked design – no torsion-prone structure due to, for example, separated construction of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control unit's touch display enables easy and intuitive programming and operation of the system. After loading the pipe, it is secured by the clamping chuck in the carriage, ensuring exact positioning of the pipe and thus the creation of dimensionally accurate geometries. Standard features also include a pipe geometry check before the bending process: If the bending process is started from the wrong position, the machine will not allow operation, thus preventing operator error. Optional add-ons provide more convenience, increase output, and thereby improve system efficiency. Data exchange from the optional pipe calculation program TBS-3D (PC version) is possible via USB stick or via FTP access from a computer to the machine controller. USB or LAN connectors (RJ45) are provided as standard. Existing pipe geometries can be quickly and easily converted via STEP format, for example. Standard equipment: → Electromechanical drive for the bending axis 2.2 kW → Rotation speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1 mm → Electronic torsion measurement ±0.1° → Manual stop system (overrun stops in length) → Manual indexing system (15° in torsion) → Three-jaw chuck for securing the pipe in the carriage → External control panel Hsdpfxew Sr Ucs Acusfn PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be computed directly at the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed via frequency converter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic clamping chuck → Automatic mandrel lubrication → Pneumatic stop system (length + torsion) → Mobile version (on rollers) → Radius expansion Sample image shows a similar machine

Sąlyga: naudotas, Gamybos metai: 2017, Vamzdžio skersmuo (maks.): 80 mm, mandrilo ilgis: 4 500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Maximum tube loading length 4.5 m Robust and durable steel construction with a rigid, torsion-resistant connection – no twist-prone components such as a split construction between bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The touchscreen control panel allows for easy and intuitive programming and operation of the machine. After loading, the tube is clamped in the travelling chuck, ensuring precise tube positioning for dimensionally accurate geometries. Standard equipment also includes a check of tube geometry prior to bending: if the bending process is initiated from the wrong position, the machine will not start, preventing operator errors. Optional additional features provide more comfort, increase output, and enhance overall system efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is possible via USB stick or by FTP access from the computer to the machine control. USB or LAN ports (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard Equipment: → Electromechanical drive for the bending axis 4 kW → Bending speed 2.9 rpm (=17°/sec) → Bending direction: left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending spindle diameter 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation measurement ±0.1° → Manual stop system (mechanical stops for length) → Manual indexing system (15° increments for rotation) Hfodettah Rjpfx Acujn → Three-jaw chuck for tube clamping on the carriage → External operator panel PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transfer via (W)LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. Once length and angle are entered, the system calculates the feed values and bending angles automatically. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-retract mandrel Options (can be ordered as extras): → Variable bending speed via frequency inverter or servomotors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on wheels) → Radius extension Images show a new machine.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Hand Tube Bender HRB-3D 850 For bending tubes and solid material up to max. 12mm Three battery-operated digital displays ensure precise and repeatable positioning, providing exact readings of the bending angle, tube feed, and tube rotation. - Three-jaw chuck 80 mm - Stop system for feed - Feed length approx. 850 mm Hfodpfxottagdj Acuen The hand tube bender should be securely mounted on a table or frame (not included). We would be happy to provide you with a detailed quotation upon receipt of your complete company address including email and contact person.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Mandrel Bending Machine S4501 ----- For producing tube geometries with bending radii from 1.5 x D upwards → Maximum bending capacity for tube: 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity for tube: 30 x 30 x 3 mm → Maximum bending capacity for tube: 42.4 x 2 mm (stainless steel, max. Rp0.2 260 N/mm²) → Total connected load: 3 kW Hjdpfx Ajtr U Hlscuofn → Tube feed length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control’s touch display enables simple and intuitive programming and operation of the system. After the tube is loaded, it is clamped by the chuck in the carriage, ensuring precise tube positioning and therefore the creation of dimensionally accurate geometries. A geometry inspection prior to the bending process is also standard: if the bending process is started from an incorrect position, the machine will not allow operation, preventing faulty operation. Optional additional features provide further convenience and increase both output and machine efficiency. Data exchange from the optional pipe calculation software TBS-3D (PC version) is via USB stick or network connection. Existing tube geometries can be imported using the software. Standard features: → Servo drive for bending axis 1.5 kW → Adjustable bending speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive for feed → Servo drive for rotation → Three-jaw chuck to clamp the pipe in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control system: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transmission via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. Once length and angle are entered, the control system calculates the feed values and bending angles automatically. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1,200 kg