Briketavimo Augalų pirkti naudotą (187)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
mütekMPP 180
Skambinti
Sąlyga: naujas, Gamybos metai: 2024, Good, used demonstration machine
Availability upon agreement
Very robust machine with high pressing force
- Also suitable for producing marketable briquette quality *depending on material. The large-dimensioned press cylinder and the 70 mm briquette make this possible.
Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in use by satisfied customers
+ Excellent price-performance ratio
Surcharge for demonstration cooling unit + €4,980 net
(can also be retrofitted later)
* cools the pressing jaws (important from 4 hours of operation) and the hydraulic oil
* Cooling unit recommended for regular operation longer than 4 consecutive hours.
Customs tariff number: 84793010
Briquette diameter: 70 mm
Front bushing: 125 mm
Kdjdpsd Nm Siofx Af Tsw
Maximum briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Performance (material dependent): up to 150 kg/h*
*dependent on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor power: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2095 mm
Width: 1300 mm
* with large chamber 1600 mm
Height: 1700 mm
Weight: 1250 kg
Oil capacity: 220 liters
Silo diameter: 1200 mm
Silo volume: approx. 1 m³
Pump: 75 liters
Hydraulic pre-compactor
Press jaw cooling option: yes, with special accessory coolable press jaw
Hydraulic oil cooling option: yes
Cooling of the press jaw and hydraulic oil via cooling unit (special accessory)
Filling level monitoring option: yes
Continuous briquette option: yes (material dependent)
Option enlarged filling slide: yes, with enlarged filling slide as special accessory
CE compliant
Raw material requirements:
- Moisture content (atro) must be between 6% and 18%
- Chip length max. 20 mm
- Installation temperature: temperature-controlled room with at least +5°C
- Feeding must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise result
mažas skelbimas
Karsin
410 km
Briketavimo presas MALISZ MASCHINENBAU RB-440
maliszRB-440
Skambinti
Sąlyga: reikia remonto (naudotas), Gamybos metai: 2004, galia: 30 kW (40,79 AG), INCOMPLETE
NOT TESTED
Kdjdpfeqd U Smox Af Tow
hydraulic
power supply: 400V / 50Hz / 70A
capacity: 440–500 kg/h
fully automatic
mažas skelbimas
Görisried
1 241 km
Briketavimo presas
RufRuf 1100
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2009, veikimo valandos: 37 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1653, bendras plotis: 2 000 mm, bendras aukštis: 2 100 mm, bendras ilgis: 3 000 mm, bendras svoris: 5 500 kg, Hydraulic system:
- Power-regulated axial piston twin pump
• Max. operating pressure: 300 bar
• Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm
→ Motor designed as an energy-saving EFF1 efficiency class motor
• Protection class: IP 54
- Valve voltage: 24 Volt DC
- Hydraulic tank (950 l) with separate cooling and fine filter circuit, 5µm filter unit, 2.2 kW drive
- Large double return filter integrated in tank, 10µm filter unit – tank integrated into the supporting frame
Electrical design:
- Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54
- Input voltage: 400 Volt, 50 Hz
- With lockable main switch inside the enclosure
- Emergency stop button in the control cabinet
- Control voltage: 24 Volt DC
- Freely programmable control (PLC) SIEMENS S7-200
- With Siemens TP 177B operator and display panel
• Display and modification of operating states and values
• Performance of control operations
• Fault/alarm display
- Automatic start/stop via light barrier integrated in the feed hopper
- All initiators operate contactlessly
- Gear motors and pump motor with thermal winding protection
Material feed:
- Loading hopper with filling area of 800 x 400 mm
- Sturdy sheet steel construction with reinforcements
- Hopper volume: approx. 150 liters
Kdodpfxjxxk D Uj Af Tjw
- Agitator to prevent bridging, 0.55 kW drive
- Feed screw with 1.5 kW drive
- Feeding time controlled automatically by PLC
Pre-compression: Vertically arranged, hydraulically operated.
- Pre-compaction pressure adjustable via TP 177B
- Dustproof control system, utilizing the RUF-developed and patented linear displacement measurement
Main compression: Horizontally arranged, hydraulically operated.
- Pressing pressure adjustable via TP 177B, up to 300 bar
- Hydraulic cylinder 350, pressing force up to 300 tons
Pressing performance:
- Depending on settings and material, up to 600 units per hour (approx. 800 – 1,000 kg/h)
Briquette dimensions:
- 240 x 70 mm
- Briquette length: 70 – 110 mm; depending on settings and the type and bulk density of the material to be briquetted
- Max. specific pressing pressure approx. 1,776 kg/cm²

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
mažas skelbimas
Bad Feilnbach
1 160 km
Briketavimo presas
GrossGP Genius 2/50
Skambinti
Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 872 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 910-2265, bendras plotis: 1 350 mm, bendras aukštis: 1 410 mm, bendras ilgis: 1 900 mm, briketo skersmuo: 60 mm, bendras svoris: 750 kg, įvesties srovės tipas: trifazis, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, alyvos bako talpa: 100 l, slėgis: 160 juosta, galia: 5,5 kW (7,48 AG), pildymo angos ilgis: 1 044 mm, pildymo angos plotis: 1 044 mm, Briketų skersmuo (mm): 60
Kdedpsxwm Utjfx Af Tew
Hidraulinis variklis (kW): 5,5
Nuolatinis maišytuvas (kW): 0,5
Sraigto variklis (kW): 0,6
Alyvos kiekis (apie l): 100
Svoris (apie kg): 750 kg
mažas skelbimas
Wijchen
1 253 km
Briketavimo presas POR A 100 N 2012
PORA 100 N
Skambinti
Sąlyga: naudotas, Gamybos metai: 2012, bendras plotis: 1 380 mm, bendras aukštis: 1 710 mm, bendras ilgis: 2 100 mm, Tai komplektas, sudarytas iš briketų preso su ištraukimo sistema.
Ištraukimo našumas: 5.800 m³/h
- Pagaminimo metai: 2012
- Dokumentacija: nėra
- Transportavimo matmenys: 2100 mm x 1380 mm x 1710 mm (ilgis x plotis x aukštis)
- Transportavimo pakuotės [vnt.]: 1
Finansinė informacija
Kedpsxr Dz Tjfx Af Todw
PVM: Nurodyta kaina be PVM
PVM / Skirtumo apmokestinimas: PVM atskaitomas verslui
Pristatymas ir priėmimas mainais galimi bet kada visiems pramoninio sektoriaus įrenginiams.
Glenn Smeets
Atraskite daugiau naudotų mašinų
mažas skelbimas
Korschenbroich
1 234 km
Tiesinimo augalų
MUBEAProfi
Skambinti
Sąlyga: naudotas, Gamybos metai: 1970, Sheet width 170 mm
Sheet thickness 0 mm
Number of rollers 0
Machine weight approx. 0.1 t
+++++
Please note that the machine is dismantled and ready for loading. For this reason, a powered demonstration or the production of a video is not possible.
Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, sending additional pictures is not possible.
Ksdpfxsd N Spms Af Tjdw
+++++
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas Briketavimo presas Aliuminis
MuetekMPP NEM 300
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, * Production time approx. 4–5 months
---
Our best-selling briquetting press series
+ Proven, straightforward technology for extremely low failure rates
+ 25 years of experience, continuous development, and expertise
+ Several hundred machines in use by satisfied customers
+ Excellent price-performance ratio
The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%.
The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material.
The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected.
Briquetting offers the following advantages:
• Volume reduction of up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Cost-effective disposal
• Profitable resale
--
Briquetting Press NEM 300
Throughput capacity approx. up to 200 kg per hour *highly material-dependent
Kdodpfjchqxxsx Af Tjw
- Last test with aluminum granulate
mažas skelbimas
Juszczyn
670 km
Briketavimo presas
POROscar
Skambinti
Sąlyga: labai geros būklės (naudotas), Briketavimo staklės POR Oscar 9kW
Vidutinė briketų gamyba: 130-180 kg
Briketo skersmuo: 70 mm
Variklio galia: 9 kW
Įkrovimo bunkerio skersmuo: 1170 mm
Techninė dokumentacija
CE ženklinimas
Įrenginio svoris apie 800 kg
Kdjdpexdahyjfx Af Tow
mažas skelbimas
Görisried
1 241 km
Briketavimo presas
RufRuf 1100
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2013, veikimo valandos: 37 400 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2110, bendras plotis: 2 000 mm, bendras aukštis: 2 100 mm, bendras ilgis: 3 000 mm, bendras svoris: 5 500 kg, Hydraulic system:
- Power-regulated axial piston twin pump
• Max. operating pressure: 300 bar
• Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm
→ Motor designed as an energy-saving EFF1 efficiency class motor
• Protection class: IP 54
- Valve voltage: 24 Volt DC
- Hydraulic tank (950 l) with separate cooling and fine filter circuit, 5µm filter unit, 2.2 kW drive
- Large double return filter integrated in tank, 10µm filter unit – tank integrated into the supporting frame
Electrical design:
- Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54
- Input voltage: 400 Volt, 50 Hz
- With lockable main switch inside the enclosure
- Emergency stop button in the control cabinet
- Control voltage: 24 Volt DC
- Freely programmable control (PLC) SIEMENS S7-200
- With Siemens TP 177B operator and display panel
• Display and modification of operating states and values
• Performance of control operations
• Fault/alarm display
- Automatic start/stop via light barrier integrated in the feed hopper
- All initiators operate contactlessly
- Gear motors and pump motor with thermal winding protection
Kdedpfx Ajxwizijf Tow
Material feed:
- Loading hopper with filling area of 800 x 400 mm
- Sturdy sheet steel construction with reinforcements
- Hopper volume: approx. 150 liters
- Agitator to prevent bridging, 0.55 kW drive
- Feed screw with 1.5 kW drive
- Feeding time controlled automatically by PLC
Pre-compression: Vertically arranged, hydraulically operated.
- Pre-compaction pressure adjustable via TP 177B
- Dustproof control system, utilizing the RUF-developed and patented linear displacement measurement
Main compression: Horizontally arranged, hydraulically operated.
- Pressing pressure adjustable via TP 177B, up to 300 bar
- Hydraulic cylinder 350, pressing force up to 300 tons
Pressing performance:
- Depending on settings and material, up to 600 units per hour (approx. 800 – 1,000 kg/h)
Briquette dimensions:
- 240 x 70 mm
- Briquette length: 70 – 110 mm; depending on settings and the type and bulk density of the material to be briquetted
- Max. specific pressing pressure approx. 1,776 kg/cm²
mažas skelbimas
Wijchen
1 253 km
Briketavimo presas Schuko Compacto CT 700 S-20 2017
SchukoCompacto CT 700 S-20
Skambinti
Sąlyga: naudotas, Gamybos metai: 2017, bendras plotis: 2 450 mm, bendras aukštis: 1 100 mm, bendras ilgis: 1 900 mm, Savaiminis svoris: 800 kg
Kaina: pagal užklausą
- Pagaminimo metai: 2017
- Dokumentacija prieinama: Ne
- CE žymėjimas: Taip
- Serijos numeris: 5037411-000150
- Transportavimo matmenys: 1900 mm x 2450 mm x 1100 mm (ilgis x plotis x aukštis)
- Transporto svoris [kg]: 800 kg
- Transporto pakuotės [vnt.]: 2
Kodpfsxan Utox Af Todw
Finansinė informacija
PVM: Nurodyta kaina be PVM
PVM / Skirtumo apmokestinimas: PVM gali būti atskaitytas juridiniams asmenims
Pristatymas ir priėmimas pagal mainus galimi bet kada už viską pramonės srityje
Yorick Diebels
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
mütek SystemtechnikMGP 60
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Briquetting press with PLC control and automatic briquette length adjustment
Throughput: up to a maximum of 60 kg/h
Ksdpfx Afev Rpxlj Tedw
Briquette: 50 mm cylindrical
Motor: 5.5 kW
Dimensions: 1,900 x 1,350 x 1,410 mm
Weight: approx. 860 kg
Requirements:
Feed material ideally shorter than 25 mm chip length
Moisture content 6–12% (ATRO)
Machine suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour break, etc.
If the machine is to operate continuously for more than 2 hours at a time, an optional cooling unit must be connected.
mažas skelbimas
Wijchen
1 253 km
Briketavimo presas Weima TH 400 1998
WeimaTH 400
Skambinti
Sąlyga: naudotas, Gamybos metai: 1998, Briketų presas
Weima TH 400
Pagaminimo metai: 1998
Briketo diametras: 50 mm
Našumas: 60–80 kg/val.
Mašinos numeris: 950-756
Pagrindinis variklis: 7,5 kW
200 bar, 400 V
Į komplektą įeina didelis surinkimo konteineris
Šiuo metu mašina neveikia, hidraulinis blokas nesandarus.
- Pagaminimo metai: 1998
- Dokumentacija: Nėra
Finansinė informacija
PVM: Nurodyta kaina be PVM
PVM/skirtumo apmokestinimas: PVM atskaitomas verslui
Pristatymas ir priėmimas daliniu keitimu galima bet kuriam pramonės įrenginiui
Yorick Diebels
Ksdpfxewh I Uro Af Tsdw
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
R 200
Skambinti
Sąlyga: geras (naudotas), Good, used condition
Main motor: 11 kW
Throughput up to max. 200 kg/h
Year of manufacture: 12/2008 / technically inspected in 01/2025
Kdjdpfx Ajt Hxudjf Tow
Briquette size: 150x60 mm
*Used machine, sold as seen
Functional guarantee upon handover
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
mütek SystemtechnikMPP NEM 900
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, * Options available at extra cost, see below
* Production time approx. +/- 5 months
The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction, ensuring consistent briquette quality during continuous operation. The pressing process takes place without any binding agents, relying solely on hydraulic pressure. Depending on the material, the input volume can be reduced by up to 90%.
The standard silo has a volume of approx. 0.5 m³. Larger silos or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. MPP NEM single machines can be combined into complete systems according to customer requirements. The press’s chip container can be loaded manually, via conveyor belt, with a dust extractor, or by tilting container. For fully automatic systems, the use of a lifting/tipping device in combination with a shredder is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material.
The length of a briquette varies by model, between 40 and 80 mm; the diameter depends on type: 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be fitted with a collecting tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length can be filled into the press’s storage container. A stirrer is installed at the bottom of the container to prevent bridging and feed the material into the precompaction chamber. In this chamber, a hydraulic slide precompacts the material and pushes it into the pressing block. The main ram compresses the material against a vertical slide until the set pressure is reached. Then the vertical cylinder lifts, and the briquette is ejected.
The more homogeneous the input material, the more uniform the length of the briquettes produced.
Advantages of briquette production:
• Reduction of volume by up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Convenient disposal
• Profitable sales
Briquetting Press NEM 900:
For briquetting aluminium chips
Throughput: up to max. 320 kg/h (material-dependent; chip length < 14 mm)
*Further details after a free test with your material.
Briquette diameter: Ø 70 mm
Optimal briquette length: 70 mm
Technical data:
Total connected load: approx. 31 kW
Continuous operation approx. 22 kW
400 Volt / 50 Hz / 3-phase
Pump: 120 + 60 litres per minute
Silo: 1 m³
Silo diameter: 1200 mm
Including stirrer
Oil tank: 600 litres
Kdedsgfm Ryopfx Af Tow
Dimensions: 2500 x 1700 x 1730 mm (L x W x H)
Weight: 2,250 kg
Hydraulic precompaction via slide
Main pressing cylinder
Vertical cylinder
Prepared for connection to a cooling unit
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
muetekMPP 280
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 8 h, Another machine immediately available
Very robust machine with high pressing force
- also suitable for producing a saleable briquette quality* depending on material. The large-dimensioned press cylinder and 80 mm briquette diameter make this possible.
Our best-selling briquetting press series
+ Proven, simple technology for extremely low failure rates
+ 25 years of experience, continuous development and expertise
+ Several thousand machines in use with satisfied customers
+ Excellent price-performance ratio
Surcharge for cooling unit: + €4,995 net (can also be retrofitted later)
* cools the pressing jaws and hydraulic oil (recommended if the press is to operate continuously for longer than approx. 3.5 hours without interruption)
Briquette diameter: 80 mm
Front bushing: 125 mm
Max. briquette stroke: 100 mm
Optimum briquette stroke: 80 mm
Performance (depending on material): up to 200 kg/h*
*dependent on bulk density
*based on a bulk density of 200 kg per cubic meter
Kdsdpfx Ajxfwdof Tow
Motor power: 9.2 kW
400 Volt / 50 Hz / 3 phase
Length: 2095 mm
Width: 1300 mm
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo capacity: approx. 1 m³
Pump: 75 liters
Hydraulic pre-compressor
Option for pressing jaw cooling: yes, with special accessory for cooled pressing jaw
Option for hydraulic oil cooling: yes
Cooling of pressing jaw and hydraulic oil with cooling unit (special accessory)
Fill level monitoring option: yes
Continuous briquette option: yes (material-dependent)
Option for enlarged feed slide: yes, with special accessory enlarged feed slide
CE compliant
Requirements for raw material:
- The moisture content (atro) must be at least 6% and at most 18%
- Maximum chip length: 20 mm
- Installation temperature: heated room with at least +5°C
- Feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
mütekMFP 35
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Machine available at special price
Another machine, available immediately (ex works Neckartailfingen)
Demonstration machine with approx. 10 operating hours
Your advantages:
+ Very robust, simple technology
+ Excellent price-performance ratio
+ Suitable for continuous operation
+ Long-standing, reliable, and established machine
Including control cabinet with timer operation
The press is switched on manually and runs for the set time on the timer (e.g., 4 hours), then automatically shuts off.
Technical data:
Briquette dimensions: approx. 35 x 35 mm (square)
Briquette length: 5–40 mm *depending on material
Throughput capacity up to 25 kg/h *depending on material
Machine dimensions (approx.): 137 x 75 x 148 cm (L x W x H)
Machine weight: approx. 250 kg
Silo capacity: approx. 250 liters
Motor: 2.2 kW, 400 V - 50 Hz
Noise emission: 62 dB
Raw material requirements:
- Wood shavings and dust less than 15 mm in length
- Moisture content less than 18% ATRO
- Sand, stones, metals, and minerals increase wear
---
Optional at extra charge:
- Timer function + €490 net
The machine is started manually and switches off automatically after the preset time.
- Fill level sensor for automatic operation + €1,450 net
Ksdpfxofci D As Af Tsdw
Press starts and stops automatically
* NEW!!! Also available in 230 Volt,
Motor then 3 kW instead of 2.2 kW,
C7m2mgj
Surcharge + €690 net (delivery time approx. 8 weeks)
---
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
WEIMATH 600
Skambinti
Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Briketavimo presas skirtas medienai arba medienai panašioms medžiagoms
Našumas: apie 80–100 kg/val.
Briketo dydis: 60 mm cilindrinis
Variklis: 7,5 kW
Alyvos šildytuvas
6374 darbo valandos
Matmenys: apie 2150 x 1700 x 1400 mm
Talpos dydis: 1400 x 1400 x 920 mm
Papildomai:
Gali būti komplektuojama su ištraukimo sistema kaip bunkerio priedas.
Reikalavimai:
Kdjdpfx Asw Hpizef Tsw
Išeitinė medžiaga idealiai turėtų būti trumpesnė nei 25 mm ilgio drožlės
Drėgnis: 6–12 % ATRO
Mašina tinkama nepertraukiamam veikimui. Pvz., iki 2 valandų briketavimas, 1 valandos pertrauka ir kt.
Jeigu reikia, kad mašina dirbtų ilgiau nei 2 valandas be pertraukos, būtina sumontuoti papildomą aušinimą.
mažas skelbimas
Neckartailfingen
1 238 km
Užimtumo medžiaga Briketavimo presas
mütekMAP 750
Skambinti
Sąlyga: geras (naudotas), Used, in good condition.
Technically inspected pre-owned machine
Base machine starting from: €139,750 net
*Options available at extra cost, see below
Delivery time approx. 16 weeks after order
Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced
Technical data:
Throughput capacity up to max. 750 kg/h (material-dependent)
(e.g. sawdust with a bulk density of 250 kg/m³)
A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material.
Commodity code: 84793010
Briquette Ø 65 mm
Including 2 m press channel
Main drive motor power 37 kW
Feed auger with geared motor 2.2 kW
Compactor auger 5.5 kW
Hydraulic pump motor 0.37 kW
Total connected load: approx. 47 kW
Control panel with plain text display for machine status and load display for main drive and feed augers
PLC control with operating hours counter in control cabinet
Machine carries CE marking
Automatic start-stop function
Dimensions 3100x860x1800 mm (LxWxH)
Weight: 3,800 kg
Options at extra cost:
Temperature control unit for pressing tools
For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch
Ready for connection – required for operation
Including corresponding control system + €7,850 net
Kjdpfxjfmqq Es Af Todw
Guillotine or tablet crusher
For cutting briquettes to size + €6,900 net
Compressed air connection required!
Silo for MAP series + €19,940 net
- Buffer silo above the machine -
Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor.
Transport piping / cooling section (nominal: 4x2m)
Price per 2 meters: €990 net
Assembly / commissioning (estimated 2-3 days on site)
Billed according to actual time and documented separately. The following rates apply:
Service technician/mechatronics engineer per assembly and travel hour: €129.00
Overtime: 25% surcharge
Each Saturday and night hour: 50% surcharge
Each Sunday and public holiday hour: 100% surcharge
Daily allowance per technician: country-specific
Per car/transporter kilometer: €0.98/km
Travel and accommodation at actual cost or by flat rate charged to the client.
Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate
Requirements for feedstock:
- Moisture content (bone dry) must be between at least 6% and max. 15%
- Maximum chip length 18 mm
- Installation temperature: heated room at least +5°C
- The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas Aliuminio briketavimo presas
mütekMPP NEM 90
Skambinti
Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new
only 704 operating hours
Special price for a slightly used demo machine
Base machine: €29,990 net
Ksdpfjd N Dnhex Af Tsdw
Options at extra cost:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material.
Throughput rate: up to max. 70 kg/h (depending on material)
Briquette diameter: Ø 50 mm
Motor: 5.5 kW
400 Volt / 50 Hz / 3-phase
Pump: 40 litres
Max. briquette length: 50 mm
Opt. briquette length: 40 mm
Silo diameter: 1,000 mm
Oil tank: 110 litres
Dimensions: 1750x1130x1100 mm (LxWxH)
Weight: 950 kg
Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder
Level sensor: yes
Requirements for input material
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room, minimum +5°C
- Max. load on agitator: 150 kg
- The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas / briketų presas
mütek SystemtechnikMPP 110
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, Machine lead time approx. 3.5 months
Very robust machine with high pressing force
Kdodpfx Asffh Atof Tsw
- Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible.
Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in use by satisfied customers
+ Good price-performance ratio
Options:
Surcharge for cooling unit + €3,995 net (can also be retrofitted later)
* Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil
* Cooling unit recommended for regular continuous operation of more than 3.5 hours
Large pre-compaction chamber + €1,975 net
Recommended for light input materials such as planer chips
Customs tariff number: 84793010
Briquette diameter: 65 mm
Front bushing: 65 mm
Max. briquette stroke: 50 mm
Opt. briquette stroke: 50 mm
Performance (material dependent): up to 110 kg/h*
During last test approx. 87 kg/h
*Dependent on bulk density
*Based on a bulk density of 200 kg per cubic meter
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo capacity: approx. 0.7 m³
Pump: 37 liters
Hydraulic pre-compactor
Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws
Pressing jaw cooling via water tank (to be provided by customer)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
String briquette option: yes (material dependent)
CE compliant
Requirements for raw material:
- Moisture content (atro) must be at least 6% and a maximum of 18%
- Chip length maximum 15 mm
- Installation temperature: heated area at least +5°C
- Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
muetekMAP 1200
Skambinti
Sąlyga: geras (naudotas), Refurbished Used Machine
Base machine price from: €147,700 net
*Options available at extra cost, see below
with full 1-year warranty
Delivery approx. 16 weeks after order
Technical data:
Throughput capacity up to 1200 kg/h (material dependent)
(e.g. sawdust with a bulk density of 180 kg/m³)
Briquette diameter: 75 mm
including 2 m press channel
Main motor power: 45 kW
Feed screw geared motor: 2 x 2.2 kW
Compressor screw: 2 x 5.5 kW
Distributor screw: 2.2 kW
Hydraulic pump motor: 0.37 kW
Total connected load: 65 kW
Control panel with plain text display for operational status
and load indicator for main drive and feed screws
PLC control Siemens S7/300 with operating hours counter in the control cabinet
Machine bears CE marking
Automatic start/stop function
Dimensions: 3100 x 860 x 1800 mm (L x W x H)
Weight: 4500 kg
Options:
Silo for MAP series (only suitable for MAP 1200 press)
- Storage silo above the machine -
Capacity approx. 6 m³, sturdy steel construction with agitator discharge and fill level sensor.
€19,700 net plus VAT
-Temperature control unit for press tools
For maintaining the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch. Fully wired and ready to operate – essential for operation
including corresponding control system
€7,850 net
-Guillotine, for cutting briquettes to length
Compressed air connection required onsite
€6,940 net plus VAT
-Transport duct / cooling section (nominal: 4 x 2 m)
per 2 meters: €990 net
Assembly / Commissioning (nominal per press approx. 2-3 days onsite)
Billed according to actual effort, at the following rates:
Service technician/mechatronics engineer per installation & travel hour: €129.00
Overtime: +25% surcharge
Each Saturday & night hour: +50% surcharge
Each Sunday & public holiday hour: +100% surcharge
Travel expenses per technician per day: country-dependent
Per car/transporter & km: €0.98/km
Travel and accommodation on submission of receipts or flat rate at the client’s expense.
Test with customer’s own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net
Kedpfo E Dquex Af Tedw
---
Raw material requirements:
- Moisture content (oven-dry basis) must be at least 6% and max. 18%
- Maximum chip length 20 mm
- Installation temperature: heated room with at least +5°C
- Feed must be free from metals and mineral contaminants. Damage to die tools and/or increased wear may otherwise occur.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
mütekMFP 30
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Machine available at a special price
Another unit available immediately (ex works Neckartailfingen)
* Includes 1 year warranty.
Your advantages:
+ Very robust, simple technology
+ Excellent price-performance ratio
+ Suitable for continuous operation
+ Long-established, reliable machine with proven performance
Includes control cabinet with timer operation
The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically.
Technical data:
Briquette dimensions: approx. 30 x 30 mm (square),
Briquette length: 5-40 mm *depending on material
Throughput capacity: up to max. 20 kg/h *depending on material
Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height)
Machine weight: approx. 250 kg
Silo volume: approx. 250 liters
Motor: 2.2 kW, 400 V - 50 Hz
Noise emission: 62 dB
Raw material requirements:
- Wood shavings and dust less than 15 mm in length
- Moisture content less than 18% ATRO
- Sand, stones, metals and minerals will increase wear
---
Options at extra charge:
- Timer function + €490 net
Machine is started manually and switches off automatically after a preset period.
- Fill level sensor for automatic operation + €1,450 net
Press starts and stops automatically
* NEW! Now also available in 230 Volt
Motor with 3 kW instead of 2.2 kW,
Additional charge + €890 net (delivery time approx. 8 weeks)
Kedpfx Afjd Nnwls Tsdw
- Special pressing unit + €2,950 net
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
RUFLignum Classic
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 29 h, Another machine available immediately ex works Neckartailfingen
*Subject to prior sale
*Silo available at an additional charge
Press exclusively deliverable with a plant component,
such as shredder, granulator, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction system
RUF briquetting press for rectangular briquettes
Very robust and established machine
The ideal machine for professional, industrial briquette suppliers.
Type Classic – throughput up to 425 kg/h *depending on material
Options available at extra charge: Plant engineering / mütek Systemtechnik:
- mütek MRZ shredder technology
- Conveyor belts
- Overband magnets
- Extraction systems, optionally with rotary valve
- Screw conveyors
- Silos
- Various control system interconnections
- Semi-automatic packaging technology
Your advantages:
Key point:
+ Very established, mature die press from 25 years of experience. The challenges and know-how are in the details, e.g. top-quality installed valves and cylinder seals.
Kedsfhql Tspfx Af Tsdw
+ 24/7 operation possible
+ Long service life
+ Low maintenance costs
+ Compact design
+ High energy efficiency thanks to innovative hydraulics
Technical data, briquetting press:
Throughput: up to 425 kg/h*
*depending on the bulk density of your feed material
*based on a bulk density of 200 kg per cubic meter
Specific information after successful test with your material. If no test material is provided, we cannot guarantee briquette quality and throughput.
Briquette dimensions: 150 x 60 mm
Briquette length: 40 to 105 mm (adjustable)
Hydraulic pre-compressor
Hydraulic main compressor
Pressing pressure: up to approx. 1,700 kg/cm²
Hydraulic system with 260-liter oil tank
Pump motor: 30 kW / 400V / 50Hz / 3 phase
Manual control of all cylinders
Control cabinet "dust protected"
with PLC and touch display
Total power consumption of the briquetting press: approx. 33 kW
Requirements for raw material:
- Moisture content (air-dried) must be between min. 6% and max. 15%
- Maximum chip size: 20 x 2 x 2 mm
- Installation temperature: +8°C ambient
- Feed material must be free from metals and mineral contaminants such as sand, stones, etc.; otherwise, damage to the pressing tools and/or increased wear may occur.
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
RUFRB 220
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2001, Good, used condition
Low operating hours (1,675 h)
Motor: 11 kW
Throughput up to max. 220 kg/h
Briquette: 150x60 mm
Dimensions of the press:
approx. 2200x3000x1920 mm (LxWxH)
Dimensions of the control cabinet:
Kdsdpfswcc D Rsx Af Tew
500x1250x2120 mm (LxWxH)
Weight approx. 3,000 kg
mažas skelbimas
Neckartailfingen
1 238 km
Briketavimo presas
mütek SystemtechnikMPP 60
Skambinti
Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 6 h, *Machine at a special price*
Our bestselling briquetting press, the classic.
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development and expertise
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio
Options available at extra cost:
*Surcharge for fill level sensor enabling automatic operation: + €995 net
*Surcharge for large pre-compaction chamber: + €970
(recommended for very light material such as straw)
Briquette diameter: 50 mm
Front bush: 50 mm
Max. briquette stroke: 40 mm
Optimal briquette stroke: 40 mm
Throughput (material dependent): up to 60 kg/h*
*depending on bulk density
*based on bulk density of 200 kg per cubic meter
Motor output: 5.5 kW
400 Volt / 50 Hz / 3-phase
Kdedpfx Afogl Nlmo Tjw
Length: 1680 mm
Width: 1100 mm
Height: 1500 mm
Weight: 680 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Silo capacity: approx. 0.7 cbm
Pump: 27 liters
Hydraulic pre-compactor
Cooling option for press clamp: no
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
CE compliant
Raw material requirements:
- The moisture content (atro) must be between at least 6% and a maximum of 18%
- Chip length maximum 15 mm
- Installation temperature: temperate room at a minimum of +5°C
- The customer must ensure there is no hydraulic oil loss
- Feed material must be free of metals and mineral impurities such as sand, stones etc. Damage to press tooling and/or increased wear may result
Palengviname jums paiešką: "briketavimo augalų"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Briketavimo Augalų (187)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Aliejinių Augalų Sėklos
- Augalų Milteliai
- Brikettieren Spauda
- Briketu Gamyba
- Būgnas
- Būgnas Dengimas
- Debiutas Spaudos
- Fiksavimo Replės
- Grūdų Skalė

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo






































































































































































































































