Briketų Presas pirkti naudotą (7 338)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Ncsdpfx Asd N Dnhsf Ijl Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 29 h, Another machine available immediately ex works Neckartailfingen *Subject to prior sale *Silo available at an additional charge Press exclusively deliverable with a plant component, such as shredder, granulator, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette suppliers. Type Classic – throughput up to 425 kg/h *depending on material Options available at extra charge: Plant engineering / mütek Systemtechnik: - mütek MRZ shredder technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - Various control system interconnections - Semi-automatic packaging technology Your advantages: Key point: + Very established, mature die press from 25 years of experience. The challenges and know-how are in the details, e.g. top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs Ncsdpfx Aofhql Tjf Iol + Compact design + High energy efficiency thanks to innovative hydraulics Technical data, briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your feed material *based on a bulk density of 200 kg per cubic meter Specific information after successful test with your material. If no test material is provided, we cannot guarantee briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - Moisture content (air-dried) must be between min. 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Installation temperature: +8°C ambient - Feed material must be free from metals and mineral contaminants such as sand, stones, etc.; otherwise, damage to the pressing tools and/or increased wear may occur.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Ncedjd Nnwljpfx Af Iel Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net

Sąlyga: geras (naudotas), Refurbished Used Machine Base machine price from: €147,700 net *Options available at extra cost, see below with full 1-year warranty Delivery approx. 16 weeks after order Technical data: Throughput capacity up to 1200 kg/h (material dependent) (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm including 2 m press channel Main motor power: 45 kW Feed screw geared motor: 2 x 2.2 kW Compressor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operational status and load indicator for main drive and feed screws PLC control Siemens S7/300 with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, sturdy steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT -Temperature control unit for press tools For maintaining the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch. Fully wired and ready to operate – essential for operation including corresponding control system €7,850 net -Guillotine, for cutting briquettes to length Compressed air connection required onsite €6,940 net plus VAT -Transport duct / cooling section (nominal: 4 x 2 m) per 2 meters: €990 net Assembly / Commissioning (nominal per press approx. 2-3 days onsite) Billed according to actual effort, at the following rates: Service technician/mechatronics engineer per installation & travel hour: €129.00 Overtime: +25% surcharge Each Saturday & night hour: +50% surcharge Each Sunday & public holiday hour: +100% surcharge Travel expenses per technician per day: country-dependent Per car/transporter & km: €0.98/km Travel and accommodation on submission of receipts or flat rate at the client’s expense. Test with customer’s own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net --- Njdpfxs E Dquo Af Iocl Raw material requirements: - Moisture content (oven-dry basis) must be at least 6% and max. 18% - Maximum chip length 20 mm - Installation temperature: heated room with at least +5°C - Feed must be free from metals and mineral contaminants. Damage to die tools and/or increased wear may otherwise occur.

Sąlyga: geras (naudotas), Gamybos metai: 2001, Good, used condition Low operating hours (1,675 h) Motor: 11 kW Throughput up to max. 220 kg/h Briquette: 150x60 mm Dimensions of the press: approx. 2200x3000x1920 mm (LxWxH) Ncjdpfswcc D Rjx Af Iol Dimensions of the control cabinet: 500x1250x2120 mm (LxWxH) Weight approx. 3,000 kg

Sąlyga: naujas, Gamybos metai: 2024, The E60 Super briquetting press is a highly efficient briquetting machine, with an operating speed depending on the processed material of between 40 and 100 kg/h. The machine uses a 10 HP motor. The briquetting press operates on 400V – 50Hz power supply. The output material has a diameter and a maximum length of 60 mm. The unit features a dual manometer for pressure measurement, an oil level monitoring device, and an inspection window. SIEMENS LCD control system, maintenance-free operation of the machine. Processed materials: • Wood shavings • Paper • Straw • etc. Njdpjtvmf Nsfx Af Iscl Briquette diameter: 60 mm Motor power: 7.5 kW, IE2, high efficiency Productivity: 40/100 kg/h Cylinder diameter: 1000 mm Pressing force: 900 kg/cm² Maximum briquette length: 60 mm Supply voltage: 400 V Dimensions: 1510 x 1850 x 1170 mm Weight: 770 kg Cycle rate: 7/min Number of cylinders: 3 Pump pressure gauge: electronic Oil level and temperature sensor: in tank Control: Siemens PLC

Sąlyga: beveik kaip naujas (naudotas), variklio galia 5,5 kW briketo skersmuo 60 mm pjuvenų lygio jutiklis naudotos valandos 1611 h talpyklos skersmuo 1000 mm Ncjdpfx Afjxcvgvj Isl gamybos metai 1998 CE žymėjimas

Sąlyga: labai geros būklės (naudotas), Briketų presas yra visiškai atnaujintas gamintojo. Techniniai duomenys: Briketo skersmuo: 70 mm Talpos skersmuo: 1200 mm Didžiausias briketo ilgis: 70 mm Našumas: ~70 kg/val. Maitinimas: 400 V Variklio galia: 11 kW Bendri matmenys: Ilgis: 2100 mm Aukštis: 1600 mm Ncsdpfetianfjx Af Iel

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, I am selling a heavy-duty briquetting press RUF RB440. Ncsdpswun I Ejfx Af Iel Year of manufacture: 11/2002 / Completely refurbished with warranty until 2025 Motor power: 30 kW Output: approx. 400 wood briquettes per hour Wood briquette RUF format: 150 x 60 x 40–110 mm (depending on material) Material moisture up to 15% Nominal pressing pressure: 14,200 N/cm² Oil cooler included Dimensions: 3000 x 1800 x 2000 mm Total weight: 3000 kg Equipment: right-hand side – right entry socket. Condition: Fully overhauled / 500 operating hours warranty, like new. Immediately available. Comes with full documentation and CE certification.

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilna briketavimo linija 2 x RUF 330. Katilinė, būgninė džiovykla, konvejeriai. Ncjdpjxazhtofx Af Iel

Sąlyga: geras (naudotas), Gamybos metai: 2009, veikimo valandos: 37 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1653, bendras plotis: 2 000 mm, bendras aukštis: 2 100 mm, bendras ilgis: 3 000 mm, bendras svoris: 5 500 kg, Hydraulic system: - Power-regulated axial piston twin pump • Max. operating pressure: 300 bar • Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm → Motor designed as an energy-saving EFF1 efficiency class motor • Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 l) with separate cooling and fine filter circuit, 5µm filter unit, 2.2 kW drive - Large double return filter integrated in tank, 10µm filter unit – tank integrated into the supporting frame Electrical design: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - With Siemens TP 177B operator and display panel • Display and modification of operating states and values • Performance of control operations • Fault/alarm display - Automatic start/stop via light barrier integrated in the feed hopper - All initiators operate contactlessly - Gear motors and pump motor with thermal winding protection Material feed: - Loading hopper with filling area of 800 x 400 mm - Sturdy sheet steel construction with reinforcements - Hopper volume: approx. 150 liters - Agitator to prevent bridging, 0.55 kW drive - Feed screw with 1.5 kW drive - Feeding time controlled automatically by PLC Pre-compression: Vertically arranged, hydraulically operated. - Pre-compaction pressure adjustable via TP 177B - Dustproof control system, utilizing the RUF-developed and patented linear displacement measurement Main compression: Horizontally arranged, hydraulically operated. - Pressing pressure adjustable via TP 177B, up to 300 bar - Hydraulic cylinder 350, pressing force up to 300 tons Pressing performance: - Depending on settings and material, up to 600 units per hour (approx. 800 – 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length: 70 – 110 mm; depending on settings and the type and bulk density of the material to be briquetted Njdpfoxxk D Ujx Af Iocl - Max. specific pressing pressure approx. 1,776 kg/cm²

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Briquetting press machine, automatic, hydraulic model POR STANDARD Used machine Condition: Excellent Briquette cutting system Ncsdpfx Aow E Iyief Isl Hydraulic machine CE marking: Yes Hourly output: 60 / 90 kg/h Hydraulic pump motor: 7.5 HP Briquette diameter: 65 mm Maximum briquette length: 50–300 mm Voltage: 380V / 50 Hz Net weight: 800 kg Overall dimensions: 195 x 110 x 150 cm (H)

Sąlyga: geras (naudotas), Gamybos metai: 2013, veikimo valandos: 37 400 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2110, bendras plotis: 2 000 mm, bendras aukštis: 2 100 mm, bendras ilgis: 3 000 mm, bendras svoris: 5 500 kg, Hydraulic system: - Power-regulated axial piston twin pump • Max. operating pressure: 300 bar • Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm → Motor designed as an energy-saving EFF1 efficiency class motor • Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 l) with separate cooling and fine filter circuit, 5µm filter unit, 2.2 kW drive Nsdpfx Aexwizisf Ijcl - Large double return filter integrated in tank, 10µm filter unit – tank integrated into the supporting frame Electrical design: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 - With Siemens TP 177B operator and display panel • Display and modification of operating states and values • Performance of control operations • Fault/alarm display - Automatic start/stop via light barrier integrated in the feed hopper - All initiators operate contactlessly - Gear motors and pump motor with thermal winding protection Material feed: - Loading hopper with filling area of 800 x 400 mm - Sturdy sheet steel construction with reinforcements - Hopper volume: approx. 150 liters - Agitator to prevent bridging, 0.55 kW drive - Feed screw with 1.5 kW drive - Feeding time controlled automatically by PLC Pre-compression: Vertically arranged, hydraulically operated. - Pre-compaction pressure adjustable via TP 177B - Dustproof control system, utilizing the RUF-developed and patented linear displacement measurement Main compression: Horizontally arranged, hydraulically operated. - Pressing pressure adjustable via TP 177B, up to 300 bar - Hydraulic cylinder 350, pressing force up to 300 tons Pressing performance: - Depending on settings and material, up to 600 units per hour (approx. 800 – 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length: 70 – 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, Felder Clean Air Extraction Unit | Dedusting System RL 200 | Ø 200 mm Max. air volume flow: 4000 m³/h Rated air volume flow: 20 m/sec, 2300 m³/h Negative pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Njdpfswa Rlkex Af Iocl Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: ready for operation Price: 15,500.- The plant has already been dismantled and is stored in Raasdorf.

Sąlyga: naujas, Gamybos metai: 2025, Performance: 10 - 25 kg/h Briquette size: cube 30mm x 30mm Hopper capacity: 0.33 m³ Dimensions: 1300 mm x 740 mm x 1200 mm (L x W x H) Power consumption: 2.2 kW Ncedpfx Afok Utqvj Iel Machine length: 1300 mm Machine width: 740 mm Machine height: 1120 mm Weight: 233 kg

Sąlyga: naujas, Gamybos metai: 2025, Capacity: 40 - 100 kg/h Briquette diameter: 60 mm Briquette length: 40 - 70 mm Ncedoknyhpjpfx Af Ijl Automatic start: yes Oil preheating system: yes Max. material moisture: 15% Hopper diameter: 1000 mm Dimensions: 1850 mm x 1170 mm x 1510 mm (LxWxH) Motor power: 7.5 kW Control cabinet: with PLC and Siemens touch screen Weight: 770 kg

Sąlyga: geras (naudotas), Gamybos metai: 1990, dar gerai išsilaikiusi briketavimo presas Hidraulinis variklis 5,5 kW Drožlių konteineris apačioje 120 x 120 cm su nuolydžiu priedu (viršuje 2 m), 85 cm aukščio pagal pageidavimą galima įsigyti ir filtravimo priedą (už papildomą mokestį) Njdexdlhropfx Af Iocl galima pagaminti ir mažesnį medinį priedą

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Equivalent to Weima C 150 Year of manufacture: 2019 1845 operating hours Features and technical data: Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection data: 400 V +/- 5% / 50 Hz Included: - Press mechanism with filling cylinder, main cylinder, clamping cylinder - Connection part for transport pipe - Chrome-plated clamp - Hydraulic tank 160 l with pump motor + valve control - Safety switch for oil temperature - Control cabinet and electrical control system - Briquette length monitoring - Automatic end position for all cylinders Ncodpew Rhk Defx Af Iel - Manual control - Automatic "On/Off" with level sensor switch Material: planer shavings, sawdust from solid wood, loose, clean, and free from foreign substances * Dimensions: max. 10 mm * Throughput: approx. 50 m³/year/ * Specification for foreign substances: Anything other than wood, wood pieces larger than 15 mm. Throughput capacity is highly dependent on material type. The stated values are averages. Actual performance may vary depending on blend ratio, moisture, and material characteristics! Application case not or not fully known/indicated. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure sufficient ventilation for the press/unit/oil cooler. In the case of heat accumulation, runtime may be drastically reduced depending on temperature rise. Supplied with new press clamp. Availability: by arrangement Stock location: Flörsheim

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HaRo2020, bendras plotis: 800 mm, bendras aukštis: 1 100 mm, bendras ilgis: 1 200 mm, briketo skersmuo: 60 mm, bendras svoris: 300 kg, garantijos trukmė: 12 mėnesiai, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 400 V, galia: 3 kW (4,08 AG), Įranga: avarinis stabdymas, Our new HaRo2020 briquetting press with a capacity of up to 40 kg/h, automatic clamp, and pre-compactor is manufactured in-house. You can only purchase the machine directly from us, excluding any middlemen. The briquetting presses are CE-compliant and produced according to the latest regulations. Since we manufacture most of the components ourselves, we can produce the machine at a particularly competitive price. Nsdpfx Ajw A Hvdof Iocl The price is plus VAT. The new hydraulic unit is equipped with a SILENCE PUMP, making the machine almost silent in operation. Another advantage of the helical gearing in the pump is its durability. Everything is Made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German manual (PDF) for the operation of this machine. The material to be pressed must have a moisture content below 15%—ideally between 10% and 12%—suitable for sawdust and planer shavings. Technical Data - Hydraulic unit: 3.0 kW (connection power) - Power consumption per hour approx. 1.8 – 2.0 kWh - Output: approx. 15 – 40 kg/h - Voltage: 400 V - Frequency: 50 Hz - Fuse: 16 A plug - Power cable: 3 m - Hydraulic control system with Bosch Rexroth valves - Briquette diameter: 60 mm (length varies depending on material) - Motor equipped with motor protection and emergency stop for the safety of operators and the machine itself - No susceptible electronic components like controllers, sensors, probes, or complex control systems - Operation without any additives - Counterpressure automatically adjusts to your material - The pre-compactor allows trouble-free processing of voluminous shavings - No adjustments or pressure monitoring required - Fully automatic operation Spare parts are readily available because we produce the machines in small series in-house in GERMANY. The large oil tank ensures that the oil does not overheat during continuous operation. Machine Dimensions Length: 1.25 m Width: 0.82 m Height: 1.11 m Hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is ready to use immediately and does not require any installation—just plug it in and start. The machine can be inspected and tested. You are welcome to send us a sample of your material for testing; this is the most efficient way.

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and technical data: Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Nodpfot Hagnex Af Iecl Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, BRIKETTIER- UND PELLETIERTECHNOLOGIE: Maschinentyp: BS70 Brikettierausrüstung Die Brikettierpresse vom Typ BS70 kann vielseitig zur Verarbeitung von natürlich nachwachsenden Rohstoffen zur Herstellung neuer, veredelter Handelswaren eingesetzt werden. Mit dieser Ausrüstung werden Materialien wie Stroh, Hülsenfrüchte, Heu, Papier, Holz sowie andere Naturstoffe und deren Mischungen verarbeitet und gepresst. Der Hersteller konstruiert das Gerät entsprechend dem jeweils zu verarbeitenden Produkt. Der Feuchtigkeitsgehalt der zu verarbeitenden Rohmaterialien darf maximal 10-12% betragen und keinerlei Fremdstoffe (Metall, Kies, Sand usw.) enthalten. Das Pressen erfolgt ohne Zugabe von Zusatzstoffen oder Bindemitteln, lediglich durch den Pressvorgang, bei dem – abhängig vom Ausgangsmaterial – eine Dichte von über 1 kg/dm³ erreicht werden kann. Das entstehende Endprodukt wird automatisch in die Lagerbehälter abgelegt – es ist kein manuelles Handling erforderlich – und eignet sich für den Dauerbetrieb. Dies wird durch 4 Brikettierpressen (Brikettierdurchmesser 70 mm) und 1 Pelletiermaschine (Pelletdurchmesser 6 mm) ermöglicht, die in einer Halle mit den Maßen 15 x 20 x 6,3 Meter installiert werden können. Die Anlage ist für einen Einsatz von 16 Arbeitsstunden pro Tag konzipiert, mit 2 x 7 Stunden durchgehenden Betrieb innerhalb dieses Zeitraums. Das System besteht aus folgenden Einheiten: - KSD900 Strohhacker (2 Stück) - AVSZ70 Automatische Steuerung zur Materialaufbereitung (2 Stück) - Schneckenförderer (3 Stück) - Trogschneckenförderer (2 Stück) - CSV70 Rohrleitung (2 Stück) - PFK70 Absaugung und Staubfilter (1 Stück) - PF70 Staubfilter (1 Stück) - ST70 Silotank (6 m³) (2 Stück) - BS70 Brikettpresse (4 Stück) Der Presskolben verdichtet das Material in einem konischen Rohr und erzeugt einen kontinuierlichen Stab mit 70 mm Durchmesser. Der Druck ist einstellbar, ebenso wie die Vorschubgeschwindigkeit der Förderschnecke. Der Wechsel der Presswerkzeuge ermöglicht die Regulierung der Qualität und Dichte der hergestellten Briketts. Für unterschiedliche Rohmaterialien liefern wir diverse Pressvorrichtungen, die auf Wunsch vor Auslieferung getestet werden – sofern der Kunde Materialmuster stellt. Durch den Austausch der Presswerkzeuge eignet sich die Anlage auch für die Herstellung von Streu, die lose Verpressung von Futtermitteln oder die Erzeugung von Mischungen als Option. Das Material wird ohne Bindemittel oder chemische Zusätze verpresst. Je nach Dichte des Ausgangsmaterials entstehen unterschiedliche Produkte, deren spezifisches Gewicht 1 kg/dm³ überschreiten kann. Die Leistungsfähigkeit der Pelletier- und Brikettiereinheit beträgt auf Basis von Weizenstroh 1,5 t/h. Leistung und Produktqualität werden durch die regelbare Schraubgeschwindigkeit und den einstellbaren Pressdruck – jeweils abgestimmt auf die Qualität des Rohstoffs – bestimmt. Elektrischer Leistungsbedarf: 37+10 kW. - Pressrohr (4 Stück) - Rippentransportband (1 Stück) - HF70 Steuerung der Kühl-/Heizbetriebstemperatur (4 Stück) - AVP70 Steuerung (4 Stück) Pelletiertechnologie für Biomasse: Das hergestellte Endprodukt sind 6-mm-Pellets, 10-40 mm lang. Zu verarbeitender Rohstoff: Heu, Stroh. Ncedpfx Afeubb Ube Isl Feuchtigkeitsgehalt: max. 10 % Die Pelletproduktion umfasst: Vorzerkleinerung (Trocknen), Zerkleinerung, Dosieraggregat, Befeuchtung, Pelletierpresse, Kühlsystem, Sieb, Filter und manuelle Absackung. Maschinentyp: MiniPell (1 Stück) Maschinenleistung: 50-120 kg/h Pressenantrieb: 10 k

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 2 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1630, bendras svoris: 7 800 kg, garantijos trukmė: 6 mėnesiai, galia: 85 kW (115,57 AG), A complete production line based on the Di Più BRIK MB100 briquetting press is for sale (complete production line). Di Più BRIK MB100 machine, fully overhauled (factory rebuilt in 2025), ready for immediate operation. The machine is designed for high-performance briquetting, suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory, with all vital parts, cables, wiring, and necessary electrical components replaced. As a result, the machine is in as-new condition and comes with a 6-month Di Più manufacturer's warranty. The machine can produce briquettes with or without a hole, with diameters from 90 mm to 110 mm, from both soft and hard wood, in round or square shapes. The machine can be inspected at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. The ideal input material moisture content is between 8% and 12%, and particle size between 1 mm and 12 mm. Technical specifications: - Production capacity: 1,300 – 2,300 kg/h (with sawdust bulk density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression force: 2,000 – 2,500 kg/cm² - Vertical auger with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for closing the extrusion head: 1.5 kW - Feeder with adjustable-speed auger: 1.5 kW - Oil lubrication system for bronze bearings: 100 liters - Briquette output monitoring sensor (automatic shut-off when material runs out) - Guards for moving parts - Oil pressure sensor - Control panel - Hopper for input material (accumulator) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Made from heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material feeding is controlled by a level sensor. - 20-meter-long briquette cooling line - Automatic saw for briquette cutting - The saw automatically cuts briquettes to operator-preselected lengths. - Device for the production of briquettes with a hole - Briquetting press head cooling system with chilled water Nodpfewrp Emox Af Ijcl - The system produces 50 liters/minute of chilled water for efficient head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank with water–refrigerant heat exchanger immersed inside. - Highly efficient fin-pack heat exchanger made of copper tubes and aluminum fins. - 800-liter water tank - Water supply pump (50 l/min – 20 m head – 0.55 kW) with three-way DN25 valves to control cooling water temperature in the briquetting press head. - Digital electronic temperature controller connected to NTC sensor (probe diameter 6 × 52 mm, IP68, AISI 316). OPTIONAL: NOVAPAC packer Optional additional purchase of a NOVAPAC packer, fully compatible with the Di Più BRIK MB100 and other machines, providing an ideal solution for automatic packaging directly after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the last 6 photos.

Sąlyga: naujas, Gamybos metai: 2025, Output: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Ncodspfatpopfx Af Isl Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Sąlyga: naujas, Gamybos metai: 2023, Output capacity: 15 - 55 kg/h Briquette diameter: 55 mm Container size: octagonal, diameter 750 mm Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Ncodpfx Aok Utqyjf Iel Motor power: 4 kW Control cabinet: electronically controlled via PLC Weight: 450 kg

Sąlyga: naujas, Gamybos metai: 2025, Performance: 40 and 60 kg/h Automatic Start: Yes Oil Cooler: Yes Briquette Size: 50 mm diameter Briquette Length: 35 mm Hopper Capacity: 0.38 m³ Ncodpfxswhuule Af Ijl Power Consumption: 5.5 kW Machine Length: 1860 mm Machine Width: 890 mm Machine Height: 1100 mm Weight: 400 kg