Briketų Presas Prisijungti Skirstytuvo pirkti naudotą (7 501)

Būklė: naudotas, Gamybos metai: 2019, Used machine Equivalent to Weima C 150 Year of manufacture: 2019 1845 operating hours Features and technical data: Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection data: 400 V +/- 5% / 50 Hz Included: - Press mechanism with filling cylinder, main cylinder, clamping cylinder - Connection part for transport pipe - Chrome-plated clamp - Hydraulic tank 160 l with pump motor + valve control - Safety switch for oil temperature - Control cabinet and electrical control system - Briquette length monitoring - Automatic end position for all cylinders - Manual control - Automatic "On/Off" with level sensor switch Material: planer shavings, sawdust from solid wood, loose, clean, and free from foreign substances * Dimensions: max. 10 mm * Throughput: approx. 50 m³/year/ * Specification for foreign substances: Anything other than wood, wood pieces larger than 15 mm. Throughput capacity is highly dependent on material type. The stated values are averages. Actual performance may vary depending on blend ratio, moisture, and material characteristics! Application case not or not fully known/indicated. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure sufficient ventilation for the press/unit/oil cooler. In the case of heat accumulation, runtime may be drastically reduced depending on temperature rise. Supplied with new press clamp. Gjdpfsw Rhk Dsx Af Djua Availability: by arrangement Stock location: Flörsheim

Būklė: naujas, Gamybos metai: 2025, THE WOOD PRESS FOR PREMIUM FUEL The RUF wood briquette press LIGNUM Classic is perfectly suited for briquetting medium quantities of wood chips generated in the woodworking industry. The briquetting process enables increased profits as well as reductions in storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can compress different material grain sizes into high-quality briquettes without any binders. As a result, RUF briquettes provide a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulic system. YOUR ADVANTAGES AT A GLANCE - Fully automated 24-hour operation possible - Durability - Low maintenance costs - Compact design - Direct integration into existing production lines possible - Over 35 years of experience ADVANTAGES OF RUF BRIQUETTES - Additional revenue from briquettes - Binder-free - CO2 neutral fuel - Higher calorific value compared to firewood - Space-saving storage due to rectangular format Technical Data RUF LIGNUM CLASSIC Max. throughput wood (kg/h): 410 Motor power (kW): 30 Max. specific press pressure (kg/cm²): 1700 Briquette format (mm): 150x60 Dimensions (m) L x W x H: 2.1 x 1.9 x 2.0 Approx. weight (t): 3.3 t Gedoq Rut Topfx Af Doua Availability/Delivery time upon request

Būklė: naujas, Gamybos metai: 2025, WOOD CHIP BRIQUETTING FOR ADDED PROFITS With our RUF LIGNUM R4 wood briquetting press, you can efficiently process medium to large quantities of wood chips, regardless of wood type, into high-quality briquettes—entirely without the need for binding agents. The briquetting process allows you to achieve higher revenues while simultaneously reducing transport and storage costs. Our robust LIGNUM series wood briquetting presses feature long service life, minimal wear, and can be directly integrated into existing production lines. The innovative RUF hydraulics system also ensures high energy efficiency. YOUR ADVANTAGES AT A GLANCE - Fully automated 24/7 operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Over 35 years of experience ADVANTAGES OF RUF BRIQUETTES - Increased profits from briquettes - No binding agents required - CO₂-neutral fuel - Higher calorific value compared to firewood - Space-saving storage thanks to rectangular shape Technical Data: RUF LIGNUM R4 Max. Throughput wood (kg/h): 590 Motor power (kW): 30 Max. specific pressing pressure (kg/cm²): 1700 Briquette size (mm): 150 x 60 Godpfx Afjq Ruvve Doua Dimensions (m) L x W x H: 2.9 x 2.1 x 2.1 Approx. weight (t): 4.1 t Availability/Delivery time upon request

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HaRo2020, bendras plotis: 800 mm, bendras aukštis: 1 100 mm, bendras ilgis: 1 200 mm, briketo skersmuo: 60 mm, bendras svoris: 300 kg, garantijos trukmė: 12 mėnesiai, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 400 V, galia: 3 kW (4,08 AG), Įranga: avarinis stabdymas, Our new HaRo2020 briquetting press with a capacity of up to 40 kg/h, automatic clamp, and pre-compactor is manufactured in-house. You can only purchase the machine directly from us, excluding any middlemen. The briquetting presses are CE-compliant and produced according to the latest regulations. Since we manufacture most of the components ourselves, we can produce the machine at a particularly competitive price. The price is plus VAT. The new hydraulic unit is equipped with a SILENCE PUMP, making the machine almost silent in operation. Another advantage of the helical gearing in the pump is its durability. Everything is Made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German manual (PDF) for the operation of this machine. The material to be pressed must have a moisture content below 15%—ideally between 10% and 12%—suitable for sawdust and planer shavings. Technical Data - Hydraulic unit: 3.0 kW (connection power) - Power consumption per hour approx. 1.8 – 2.0 kWh - Output: approx. 15 – 40 kg/h - Voltage: 400 V - Frequency: 50 Hz - Fuse: 16 A plug - Power cable: 3 m - Hydraulic control system with Bosch Rexroth valves - Briquette diameter: 60 mm (length varies depending on material) - Motor equipped with motor protection and emergency stop for the safety of operators and the machine itself - No susceptible electronic components like controllers, sensors, probes, or complex control systems - Operation without any additives - Counterpressure automatically adjusts to your material - The pre-compactor allows trouble-free processing of voluminous shavings - No adjustments or pressure monitoring required - Fully automatic operation Gujdpfxew A Hvdo Af Dsa Spare parts are readily available because we produce the machines in small series in-house in GERMANY. The large oil tank ensures that the oil does not overheat during continuous operation. Machine Dimensions Length: 1.25 m Width: 0.82 m Height: 1.11 m Hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is ready to use immediately and does not require any installation—just plug it in and start. The machine can be inspected and tested. You are welcome to send us a sample of your material for testing; this is the most efficient way.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2010, Performance: 180 - 300 kg/h Briquette diameter: 50 mm Hopper capacity: 0.3 m³ Lubrication pump: 1.0 kW Motor power: 15 kW Demonstration machine with few operating hours - Automatic press for briquetting wood shavings and other waste materials - Pressure oil lubrication for the heavily loaded moving components - Hydraulic clamping cylinder at the press jaw to improve briquette quality - Electrical control for all operating processes - The press head can be heated or cooled during the briquetting process - Material requirements: Moisture content between 8 and 14 % Particle size between 1 and 12 mm Technical data: - Total connected load: approx. 22.0 kW - Pressure on piston: 2,000 - 2,500 kg/cm² - Vertical compression screw: 1.5 kW Gsdpoxy S E Nofx Af Doua - Lubrication oil volume: 50 liters - Feed screw to compression screw: 0.75 kW - High-pressure pump: 0.55 kW Equipment: 1 Electric press head heater 1 Fan for press head cooling 1 V-type dosing hopper for briquetting press Heavy-duty steel construction Sight window incl. bridge breaker (driven together with the feed screw) Electro-mechanical level indicator 1 Cooling rail for briquettes L=4.0 m Briquette guidance by round bar Complete with supports

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Briquetting press for metal chips or granulate was only used for testing purposes hardly used 20 operating hours Guedefb T Huspfx Af Doa 2,000 kg/cm²

Būklė: naujas, Gamybos metai: 2025, Performance: 10 - 25 kg/h Briquette size: cube 30mm x 30mm Gedpfx Afjk Utqvj Deua Hopper capacity: 0.33 m³ Dimensions: 1300 mm x 740 mm x 1200 mm (L x W x H) Power consumption: 2.2 kW Machine length: 1300 mm Machine width: 740 mm Machine height: 1120 mm Weight: 233 kg

Būklė: naujas, Gamybos metai: 2025, Capacity: 40 - 100 kg/h Briquette diameter: 60 mm Briquette length: 40 - 70 mm Automatic start: yes Gedpfjknyhpox Af Dsua Oil preheating system: yes Max. material moisture: 15% Hopper diameter: 1000 mm Dimensions: 1850 mm x 1170 mm x 1510 mm (LxWxH) Motor power: 7.5 kW Control cabinet: with PLC and Siemens touch screen Weight: 770 kg

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, BRIKETTIER- UND PELLETIERTECHNOLOGIE: Maschinentyp: BS70 Brikettierausrüstung Die Brikettierpresse vom Typ BS70 kann vielseitig zur Verarbeitung von natürlich nachwachsenden Rohstoffen zur Herstellung neuer, veredelter Handelswaren eingesetzt werden. Mit dieser Ausrüstung werden Materialien wie Stroh, Hülsenfrüchte, Heu, Papier, Holz sowie andere Naturstoffe und deren Mischungen verarbeitet und gepresst. Der Hersteller konstruiert das Gerät entsprechend dem jeweils zu verarbeitenden Produkt. Der Feuchtigkeitsgehalt der zu verarbeitenden Rohmaterialien darf maximal 10-12% betragen und keinerlei Fremdstoffe (Metall, Kies, Sand usw.) enthalten. Das Pressen erfolgt ohne Zugabe von Zusatzstoffen oder Bindemitteln, lediglich durch den Pressvorgang, bei dem – abhängig vom Ausgangsmaterial – eine Dichte von über 1 kg/dm³ erreicht werden kann. Das entstehende Endprodukt wird automatisch in die Lagerbehälter abgelegt – es ist kein manuelles Handling erforderlich – und eignet sich für den Dauerbetrieb. Dies wird durch 4 Brikettierpressen (Brikettierdurchmesser 70 mm) und 1 Pelletiermaschine (Pelletdurchmesser 6 mm) ermöglicht, die in einer Halle mit den Maßen 15 x 20 x 6,3 Meter installiert werden können. Die Anlage ist für einen Einsatz von 16 Arbeitsstunden pro Tag konzipiert, mit 2 x 7 Stunden durchgehenden Betrieb innerhalb dieses Zeitraums. Das System besteht aus folgenden Einheiten: - KSD900 Strohhacker (2 Stück) - AVSZ70 Automatische Steuerung zur Materialaufbereitung (2 Stück) - Schneckenförderer (3 Stück) - Trogschneckenförderer (2 Stück) - CSV70 Rohrleitung (2 Stück) - PFK70 Absaugung und Staubfilter (1 Stück) - PF70 Staubfilter (1 Stück) - ST70 Silotank (6 m³) (2 Stück) - BS70 Brikettpresse (4 Stück) Der Presskolben verdichtet das Material in einem konischen Rohr und erzeugt einen kontinuierlichen Stab mit 70 mm Durchmesser. Der Druck ist einstellbar, ebenso wie die Vorschubgeschwindigkeit der Förderschnecke. Der Wechsel der Presswerkzeuge ermöglicht die Regulierung der Qualität und Dichte der hergestellten Briketts. Für unterschiedliche Rohmaterialien liefern wir diverse Pressvorrichtungen, die auf Wunsch vor Auslieferung getestet werden – sofern der Kunde Materialmuster stellt. Durch den Austausch der Presswerkzeuge eignet sich die Anlage auch für die Herstellung von Streu, die lose Verpressung von Futtermitteln oder die Erzeugung von Mischungen als Option. Das Material wird ohne Bindemittel oder chemische Zusätze verpresst. Je nach Dichte des Ausgangsmaterials entstehen unterschiedliche Produkte, deren spezifisches Gewicht 1 kg/dm³ überschreiten kann. Die Leistungsfähigkeit der Pelletier- und Brikettiereinheit beträgt auf Basis von Weizenstroh 1,5 t/h. Leistung und Produktqualität werden durch die regelbare Schraubgeschwindigkeit und den einstellbaren Pressdruck – jeweils abgestimmt auf die Qualität des Rohstoffs – bestimmt. Elektrischer Leistungsbedarf: 37+10 kW. - Pressrohr (4 Stück) - Rippentransportband (1 Stück) - HF70 Steuerung der Kühl-/Heizbetriebstemperatur (4 Stück) - AVP70 Steuerung (4 Stück) Pelletiertechnologie für Biomasse: Gjdpfx Asubb Ubef Doua Das hergestellte Endprodukt sind 6-mm-Pellets, 10-40 mm lang. Zu verarbeitender Rohstoff: Heu, Stroh. Feuchtigkeitsgehalt: max. 10 % Die Pelletproduktion umfasst: Vorzerkleinerung (Trocknen), Zerkleinerung, Dosieraggregat, Befeuchtung, Pelletierpresse, Kühlsystem, Sieb, Filter und manuelle Absackung. Maschinentyp: MiniPell (1 Stück) Maschinenleistung: 50-120 kg/h Pressenantrieb: 10 k

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 370, bendras plotis: 2 500 mm, bendras aukštis: 4 000 mm, bendras ilgis: 7 000 mm, bendras svoris: 14 000 kg, įvesties srovės tipas: trifazis, reikalingas plotis: 2 500 mm, vietos reikalavimas ilgis: 7 000 mm, reikalingas aukštis: 4 000 mm, įėjimo įtampa: 380 V, alyvos bako talpa: 200 l, slėgis: 300 juosta, darbinis slėgis: 250 juosta, galia: 37,51 kW (51,00 AG), paskutinio kapitalinio remonto metai: 2023, triukšmo lygis: 80 dB, Įranga: aušinimo blokas, avarinis stabdymas, *Parduodu mobilią medžio briketavimo įrangą.* Ruf RB440 presas > 2 val./1 tona. * Presas pilnai suremontuotas, visi dokumentai yra. * Sunkvežimio techninė apžiūra galioja iki 2026 m. sausio, paruoštas eksploatavimui, leidžiama važiuoti aplinkosaugos zonose/ žali numeriai/ be mokesčių!!! Ypatingos paskirties transporto priemonė – darbo įranga!! * PE pakuotės maišai ~90 tonų – įskaičiuota. * Linde hidraulinė pompa – nauja. * Pavarų perdavimas – naujas. * Siurbimo ventiliatoriaus variklis – naujas. * Visiškas hidraulinės alyvos keitimas 200 l – nauja. * Yra daug atsarginių dalių dėl veiklos nutraukimo. * Sunkvežimis – MAN 14.232 / 335937 km, pagamintas 1990 m. * Sunkvežimis su nauja sustiprinta platforma (Fa. Suhr). * Techninė apžiūra – nauja. * Visi 6 padangos – naujos. * Priekinės ašies stabdžiai pakeisti į naujus. * Pardavimo metu apmokymai įskaičiuoti. * Susidomėjus – prašome rašyti el. paštu. Gedpfx Afjwhw Sys Djua

Būklė: geras (naudotas), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / technically inspected in 01/2025 Guedet Hxudepfx Af Dja Briquette size: 150x60 mm *Used machine, sold as seen Functional guarantee upon handover

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Gedpsfmqq Eofx Af Djua Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Gusdpfed N Dnhex Af Dea Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: geras (naudotas), Refurbished Used Machine Base machine price from: €147,700 net *Options available at extra cost, see below with full 1-year warranty Delivery approx. 16 weeks after order Technical data: Throughput capacity up to 1200 kg/h (material dependent) (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm including 2 m press channel Main motor power: 45 kW Feed screw geared motor: 2 x 2.2 kW Compressor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operational status and load indicator for main drive and feed screws PLC control Siemens S7/300 with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, sturdy steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT -Temperature control unit for press tools For maintaining the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch. Fully wired and ready to operate – essential for operation including corresponding control system €7,850 net -Guillotine, for cutting briquettes to length Compressed air connection required onsite €6,940 net plus VAT -Transport duct / cooling section (nominal: 4 x 2 m) per 2 meters: €990 net Assembly / Commissioning (nominal per press approx. 2-3 days onsite) Billed according to actual effort, at the following rates: Service technician/mechatronics engineer per installation & travel hour: €129.00 Overtime: +25% surcharge Each Saturday & night hour: +50% surcharge Each Sunday & public holiday hour: +100% surcharge Travel expenses per technician per day: country-dependent Per car/transporter & km: €0.98/km Travel and accommodation on submission of receipts or flat rate at the client’s expense. Test with customer’s own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net --- Raw material requirements: - Moisture content (oven-dry basis) must be at least 6% and max. 18% Godpfe E Dqusx Af Deua - Maximum chip length 20 mm - Installation temperature: heated room with at least +5°C - Feed must be free from metals and mineral contaminants. Damage to die tools and/or increased wear may otherwise occur.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 29 h, Another machine available immediately ex works Neckartailfingen *Subject to prior sale *Silo available at an additional charge Press exclusively deliverable with a plant component, such as shredder, granulator, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette suppliers. Type Classic – throughput up to 425 kg/h *depending on material Godpfx Afjfhql Tj Deua Options available at extra charge: Plant engineering / mütek Systemtechnik: - mütek MRZ shredder technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - Various control system interconnections - Semi-automatic packaging technology Your advantages: Key point: + Very established, mature die press from 25 years of experience. The challenges and know-how are in the details, e.g. top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data, briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your feed material *based on a bulk density of 200 kg per cubic meter Specific information after successful test with your material. If no test material is provided, we cannot guarantee briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - Moisture content (air-dried) must be between min. 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Installation temperature: +8°C ambient - Feed material must be free from metals and mineral contaminants such as sand, stones, etc.; otherwise, damage to the pressing tools and/or increased wear may occur.

Būklė: geras (naudotas), Gamybos metai: 1999, Briketavimo presas GP 120 Tandem tipas. Presas skirtas pjuvenoms, drožlėms ir dulkėms briketuoti, su automatiniu lygio jutikliu. - Briketo diametras: 60 mm - Presavimo našumas: 40 - 120 kg/h * 2 = 80 - 240 kg/h (priklausomai nuo medžiagos) - Piltuvo atidarymo dydis: apie 1.900 x 1.900 mm - Piltuvo aukštis: apie 1.800 mm - Piltuvo talpa: apie 6,0 m³ - Variklio galia: 7,5 kW, 400 V, 50 Hz Gjdpfx Afeupwx He Doua - Valdymo spinta: iš abiejų pusių - Darbo valandos: 13.725 val. arba 13.005 val. - Hidraulinis agregatas: apie 300 l hidraulinio aliejaus bakas - Svoris: apie 1.100 kg * 2 = 2.200 kg Naudotas briketavimo presas, geros būklės. W-znyplių cilindras, replės (RB 120 sustiprintos), replės jungties flanšas viena kryptimi pakeistas (kairėje, transportavimo kryptimi) briketavimas | briketavimo presas | briketavimo presai | briketų presas | briketavimas

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Atsarginės dalys ATM Recyclingsystems GmbH, Lindemann Germany GmbH, Danieli Henschel GmbH, RUF, Ayamas briketavimo presams. Vietovė – Austrija. Prieinama iš karto. Gsdpfxexy Nkpe Af Dsua

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 56 927 h, Funkcionalumas: visiškai funkcionalus, Gamintojas: ATM Recyclingsystems GmbH Tipas: ArnoBrik 15 Pagaminimo metai: 2001 Briketų diametras: 150 mm Techniniai duomenys Gjdpfxjxy E H Hj Af Djua Briketų diametras: 140 arba 150 mm Našumas: - Ketaus drožlės: 4,8–5,3 t/h - Plieno drožlės: 4–5 t/h - Mišri briketų gamyba: 4–5 t/h - Aliuminio drožlės: 1,6–1,8 t/h Mišri briketų gamyba: 4–4,5 t/h Padangų viela: 2,5–3 t/h Valandinis našumas priklauso nuo medžiagos Briketo tankis (plienas ir ketus): 5,5 kg/dm³ Darbinis slėgis: 300 bar Užimamas plotas (I x P x A): 13 500 x 6 500 x 2 000 mm Mašinos svoris: 30 t Pagrindinio cilindro jėga: 5 300 kN Alyvos poreikis: 2 800 litrų Pagrindinis variklis: 4 x 30 kW Bendra prijungimo galia (su priedais): apie 150 kW Briketo aukštis: 110–140 mm Briketo svoris (priklauso nuo medžiagos): apie 10–16 kg Ciklo trukmė: apie 10 sek.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, veikimo valandos: 7 822 h, Funkcionalumas: visiškai funkcionalus, Gamintojas: ATM Tipas: ArnoBrik 10 Metai: 2014 Briketų skersmuo: 105 mm Techniniai duomenys Pagrindiniai matmenys Ilgis x plotis x aukštis: 4.250 x 3.600 x 2.200 mm Svoris apytiksliai: 10 t Briketų skersmuo: 105 mm Briketų aukštis, priklausomai nuo medžiagos: apie 60–120 mm Funkciniai duomenys Ciklo trukmė: 10 sek. Valandinė našumo talpa: - Aliuminis: 850–1060 kg/val. - Plienas, lietinis: 1.800–2.000 kg/val. - Nikelis: 1.800–2.000 kg/val. Gujdpfxjxy E Eve Af Dja Aliuminio briketo svoris: 2,0–2,5 kg Briketo tankis (plienas, lietinis): 5,5 kg/dm³ Briketo tankis (aliuminis): 2,2–2,5 kg/dm³ Hidraulinė įranga Reguliuojamų ašinių stūmoklinių siurblių skaičius: 2 vnt. Reikiama galia vienam siurblių komplektui: 30 kW Darbinis slėgis: 300 bar Hidraulinės talpos tūris: 1.300 l Elektrinė įranga Variklio galia: 70 kW Valdymo įtampa: 24 V DC Maitinimo įtampa: 3 x 400 V / 50 Hz

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, bendras svoris: 500 kg, galia: 3 kW (4,08 AG), PLC control system with touch control panel Briquetting output: 80 - 100 kg/h Feed screw diameter: 130 mm Connection/internal diameter: 160 mm Chip briquette diameter: 60 mm Gusdpswhv Imsfx Af Dea

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, Briquette diameter: 40 mm Gusdpfxsw Ewpgo Af Dsa Connected load: 4.1 kW Pressing capacity per hour: up to 30 kg/h depending on material Container height: 900 mm Hopper opening: round, 800 mm diameter PLC controlled Hydraulic tank capacity: 50 l Rotary encoder for automatic on/off with level sensor Oil temperature monitor Transport pipes Fully functional used machine

Būklė: geras (naudotas), Gamybos metai: 2013, veikimo valandos: 37 400 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2110, bendras plotis: 2 000 mm, bendras aukštis: 2 100 mm, bendras ilgis: 3 000 mm, bendras svoris: 5 500 kg, Hydraulic system: - Power-regulated axial piston twin pump • Max. operating pressure: 300 bar • Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm → Motor designed as an energy-saving EFF1 efficiency class motor • Protection class: IP 54 - Valve voltage: 24 Volt DC - Hydraulic tank (950 l) with separate cooling and fine filter circuit, 5µm filter unit, 2.2 kW drive - Large double return filter integrated in tank, 10µm filter unit – tank integrated into the supporting frame Electrical design: - Machine control cabinet according to DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 Volt, 50 Hz - With lockable main switch inside the enclosure - Emergency stop button in the control cabinet - Control voltage: 24 Volt DC - Freely programmable control (PLC) SIEMENS S7-200 Godpsxwizijfx Af Djua - With Siemens TP 177B operator and display panel • Display and modification of operating states and values • Performance of control operations • Fault/alarm display - Automatic start/stop via light barrier integrated in the feed hopper - All initiators operate contactlessly - Gear motors and pump motor with thermal winding protection Material feed: - Loading hopper with filling area of 800 x 400 mm - Sturdy sheet steel construction with reinforcements - Hopper volume: approx. 150 liters - Agitator to prevent bridging, 0.55 kW drive - Feed screw with 1.5 kW drive - Feeding time controlled automatically by PLC Pre-compression: Vertically arranged, hydraulically operated. - Pre-compaction pressure adjustable via TP 177B - Dustproof control system, utilizing the RUF-developed and patented linear displacement measurement Main compression: Horizontally arranged, hydraulically operated. - Pressing pressure adjustable via TP 177B, up to 300 bar - Hydraulic cylinder 350, pressing force up to 300 tons Pressing performance: - Depending on settings and material, up to 600 units per hour (approx. 800 – 1,000 kg/h) Briquette dimensions: - 240 x 70 mm - Briquette length: 70 – 110 mm; depending on settings and the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Būklė: naudotas, Gamybos metai: 2009, BRIQUETTING MACHINE PRODECO MOD. L70 – CE COMPLIANT – USED - Briquette diameter: 70 mm - Output: 50-120 kg/h Guodjwrddqepfx Af Dsa - Serial no.: 89 - Year: 2009 - Complete with manual

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 2 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1630, bendras svoris: 7 800 kg, garantijos trukmė: 6 mėnesiai, galia: 85 kW (115,57 AG), A complete production line based on the Di Più BRIK MB100 briquetting press is for sale (complete production line). Di Più BRIK MB100 machine, fully overhauled (factory rebuilt in 2025), ready for immediate operation. The machine is designed for high-performance briquetting, suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory, with all vital parts, cables, wiring, and necessary electrical components replaced. As a result, the machine is in as-new condition and comes with a 6-month Di Più manufacturer's warranty. The machine can produce briquettes with or without a hole, with diameters from 90 mm to 110 mm, from both soft and hard wood, in round or square shapes. The machine can be inspected at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. The ideal input material moisture content is between 8% and 12%, and particle size between 1 mm and 12 mm. Technical specifications: - Production capacity: 1,300 – 2,300 kg/h (with sawdust bulk density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression force: 2,000 – 2,500 kg/cm² - Vertical auger with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for closing the extrusion head: 1.5 kW - Feeder with adjustable-speed auger: 1.5 kW - Oil lubrication system for bronze bearings: 100 liters Gusdpowrp Emsfx Af Dsa - Briquette output monitoring sensor (automatic shut-off when material runs out) - Guards for moving parts - Oil pressure sensor - Control panel - Hopper for input material (accumulator) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Made from heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material feeding is controlled by a level sensor. - 20-meter-long briquette cooling line - Automatic saw for briquette cutting - The saw automatically cuts briquettes to operator-preselected lengths. - Device for the production of briquettes with a hole - Briquetting press head cooling system with chilled water - The system produces 50 liters/minute of chilled water for efficient head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank with water–refrigerant heat exchanger immersed inside. - Highly efficient fin-pack heat exchanger made of copper tubes and aluminum fins. - 800-liter water tank - Water supply pump (50 l/min – 20 m head – 0.55 kW) with three-way DN25 valves to control cooling water temperature in the briquetting press head. - Digital electronic temperature controller connected to NTC sensor (probe diameter 6 × 52 mm, IP68, AISI 316). OPTIONAL: NOVAPAC packer Optional additional purchase of a NOVAPAC packer, fully compatible with the Di Più BRIK MB100 and other machines, providing an ideal solution for automatic packaging directly after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the last 6 photos.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Briquetting press machine, automatic, hydraulic model POR STANDARD Used machine Condition: Excellent Briquette cutting system Gedpfow E Iyiex Af Deua Hydraulic machine CE marking: Yes Hourly output: 60 / 90 kg/h Hydraulic pump motor: 7.5 HP Briquette diameter: 65 mm Maximum briquette length: 50–300 mm Voltage: 380V / 50 Hz Net weight: 800 kg Overall dimensions: 195 x 110 x 150 cm (H)