Briketavimo presas

mütek MFP 30

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1981, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 3124, Esterer DKV-5S Edging Saw Gedouy Ib Iepfx Abmokf Year of manufacture: 1981 55 kW saw motor with extraction system ASV/B Year of manufacture: 1981

Sąlyga: naujas, Gamybos metai: 2024, New machine Gjdpfxst Hagno Abmskf Year of manufacture: 2024 Features and technical data: Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Sąlyga: geras (naudotas), Gamybos metai: 2001, Good, used condition Low operating hours (1,675 h) Motor: 11 kW Throughput up to max. 220 kg/h Briquette: 150x60 mm Dimensions of the press: approx. 2200x3000x1920 mm (LxWxH) Gksdpfswcc D Rjx Abmjf Dimensions of the control cabinet: 500x1250x2120 mm (LxWxH) Weight approx. 3,000 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Connected load 380V Planer shaft motor 4 kW 8.3A Gedpfx Aov Up R Aebmekf Feed motor 1x 0.37 kW, 1x 0.55 kW 2 feed speeds: 7 and 14 m/min Star-delta switch Planing thickness adjustable via handwheel Planing width 510 mm Leitz reversible knife cutterhead with 2 knives 2 table rollers Extraction port 140 mm

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (parodų įrenginys),

Sąlyga: geras (naudotas), Techniniai duomenys: Briketavimo presas geros būklės Pagaminimo metai: 2007 Gsdpfx Abewtdk Tsmokf Techninė apžiūra 2025-06 Cilindrinis briketas 80 mm Našumas iki maksimaliai 150 kg/val. *tik apie 3 949 darbo valandos - Hidraulinis presas: briketavimo presas su išstūmimo taku - Hidraulinė stotis: 4 kW - Slėgis: maks. 300 barų - Transportavimo matmenys: 1585/2140/H1940 mm - Svoris: 1370 kg Funkcinė garantija atiduodant Maloniai kviečiame nemokamam išbandymui!

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 744 h, bendras svoris: 1 500 kg, kuras: elektra, No. 04437 Gkedpfx Abeuxbccsmef Chipper / Shredder Balduf PZ 63-1 Used, year of manufacture 2011, only 744 operating hours. Made in Germany Suitable for various materials, such as wood, plastic, etc. Hopper opening: 800 x 630 mm Electrical connection: 400 V / 19.25 kW Rotor diameter: 260 mm Rotor width: 630 mm 30 interchangeable blades 30 x 30 x 15 (15 standard, 15 concave) Screen diameter: 30 mm Control: Siemens S7 200 PLC Automatic and manual operation possible Hydraulic operating pressure: 160 bar Extraction port diameter: 160 mm Including technical documentation Production of the former BALDUF chippers is now continued by MANZ GmbH, 88447 Warthausen. All spare parts and service are available there. Transport dimensions approx. 1800 x 1250 x 1800 mm (LWH) Weight: 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; sale as inspected applies. Terms of payment: Prices plus statutory VAT, payment prior to collection or dispatch. Delivery terms: ex stock or location.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Briquetting press machine, automatic, hydraulic model POR STANDARD Gjdpew E Iyijfx Abmokf Used machine Condition: Excellent Briquette cutting system Hydraulic machine CE marking: Yes Hourly output: 60 / 90 kg/h Hydraulic pump motor: 7.5 HP Briquette diameter: 65 mm Maximum briquette length: 50–300 mm Voltage: 380V / 50 Hz Net weight: 800 kg Overall dimensions: 195 x 110 x 150 cm (H)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, galia: 55 kW (74,78 AG), darbinė masė: 4 000 kg, 1 1 Latakų konvejerio juosta TFB 500x7500 – 2 1 Vibracinė lovys VR 400x3500 – 3 1 Vibracinė sietinė lovys VSR-1/500x12500 – 4 1 Metalo detektorius – – Gsdpfx Absw T Rw Ssmskf 5 1 Būgninis smulkintuvas RE-TH 150/500/3 – 6 1 Sijojimo mašina VSR-1/1000x4000 – 7 1 Grandininis konvejeris ZKF 75/60/2x21000 –

Sąlyga: naujas, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electro-hydraulic frame press machine, type Super Options: Working widths from 3,000 mm up to 5,000 mm Working heights from 2,000 mm up to 3,000 mm Optional equipment such as center pressure beam, tilting sash device, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner joints available as option), CE specification The only fully automatic, self-adjusting high-performance frame press in which pre-positioning of the timber components is not required. Width and height adjustments are made automatically, without any time loss, immediately after direct insertion of the workpieces into the pressing area. No repositioning of the timbers is necessary. Base machine features a heavy-duty welded frame construction using oversized, thick-walled special profiles. Guideways of the press corners on the pressure beams are designed for minimal wear. Gksdpfxod Rzc Rj Abmef Continuous counter bearing on the stop side for width pressing, built in a torsion-resistant design, mounted to the machine base. Continuous lower counter bearing in extremely robust, torsion-resistant design, connected to both the base frame and the machine. Insertion height 500 mm. All counter bearings are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on the right with rapid, motorized width adjustment, guaranteeing parallel travel, includes automatic hydraulic locking: Central drive for dimension adjustment both horizontally and vertically, with high adjustment and travel speed, and automatic width and height adjustment (opto-electronically controlled). 2 double-acting vertical pressure cylinders, piston diameter 50 mm, 250 mm stroke, adjustable pressure force from 400 to 2000 kg. 2 double-acting horizontal pressure cylinders, piston diameter 40 mm, 80 mm stroke, adjustable pressure force from 250 to 1250 kg. Upper right press corners, heavy-duty, machined design with automatic corner positioning. Floating press corners Contact surfaces with adhesive-repellent finish. Counterbearing and pressure plate depth 100 mm. 8-way holding and positioning device for completely loose insertion of all single timber pieces into the press area (no pre-arranging or pre-positioning required). Each frame element is held and positioned twice. Automatic lifting function allows for ergonomic insertion of the upper transverse timber on tall frames at a user-friendly height. Increases work safety by enabling floor-level operation—no ladders or steps required. All frame members are placed directly into the pressing area. Program selection options: Manual, motor-driven via pushbutton, Fully automatic via optoelectronic measurement, including automatic pressing cycle combined with safety light barrier. Automatic, cycle-controlled pressing sequence via pulse input: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing. Control cabinet mounted on the left side of the base frame for easy servicing. Fast, optoelectronic dimension adjustment. Compact hydraulic unit, adjustable from 20 to 100 bar. Freely programmable electric manual control for efficient operation, especially with large or complex frame assemblies (...