Mütek Mfp 30 pirkti naudotą (25 397)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Bdjdpod Nnwljfx Akusd Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Machine available at special price Machine available immediately (ex works Neckartailfingen) Demonstration model Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation Bdodpfsfci D Asx Akusd + Proven, well-functioning and established machine Including control cabinet with timer operation The press is started manually and then runs until the set time on the timer (e.g. 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Output capacity up to max. 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: -Wood chips and dust less than 15 mm in length -Moisture content below 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor 3 kW instead of 2.2 kW, Surcharge + €690 net (Delivery time approx. 8 weeks) ---

Būklė: beveik kaip naujas (parodų įrenginys), Demonstracinis įrenginys su 7 darbo valandomis Galimas pristatymas iš karto (iš gamyklos Neckartailfingen) Smulkintuvas MRZ 830 Prekės tarifinis numeris: 84659600 Pado anga 800x1000 mm Variklis: 18,5/22 kW; 400 V - 50 Hz - 3 fazės Peiliai: daug kartų apverčiami Hidrauliškai valdomas stūmiklis Sieto skylučių dydis pagal pasirinkimą (10 – 40 mm) Svoris apie 1.600 kg Matmenys (ilgis x plotis x aukštis) apie 2290 x 1420 x 1750 mm Turbo sankaba Standartinė komplektacija: - automatinis žvaigždės/trikampio paleidimas - greita hidraulika - automatinis IŠJUNGIMAS, kai rotorius be apkrovos - Sukimosi greitis 70–90 aps./min. dideliam našumui - Eigos valdymas siekiant išvengti tuščių ciklų - našumą didinantis hidraulinio stūmiklio žingsninis valdymas - Pertinax kreiptuvai hidrauliniam stūmikliui - vibracijas slopinantys mašinos kojelės - Atitiktis CE . Smulkintuvas skirtas natūralios medienos, drožlių ir MDF plokštės smulkinimui, kitoms medžiagoms pagal gamintojo testavimą ir patvirtinimą. . Įskaičiuota: - Smulkintuvo paaukštinimas 30 cm (paruošta konvejeriui) Papildomos smulkintuvo opcijos: - Lankstinis konvejeris + 8.770 € be PVM Horizontalioji dalis: 1200 mm Pakilimo dalis: 2500 mm Kampas: reguliuojamas 0-60 laipsnių Bjdpfx Ajv Sqrpjkuedd Iškrovimo aukštis: apie 2000 mm +/- 100 mm - Virš juostinis magnetas + 6.780 € be PVM - Konvejerio ir virš juostinio magneto valdymas + 2.750 € be PVM (Paleidimas ir sustabdymas sinchroniškai su smulkintuvu) . Reikalavimai žaliavinei medžiagai: - Drėgmės kiekis (absoliutus) turi būti mažesnis nei 30 %; - Metalai ir mineralinės priemaišos (pvz., smėlis, akmenys ir kt.) didina susidėvėjimą

Būklė: naujas, Gamybos metai: 2026, Production time approx. +/- 4 months The optimal machine for shredding, e.g., pallets and wood residues. * Prepared for extraction, see pictures 4 and 5 without additional accessories such as display hopper or conveyor belt cut-out Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph with turbo coupling included Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knives: 76 pieces, reversible multiple times Knife dimensions: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Bodpfed Hkqhox Akujdd Standard features include: - V-rotor for maximum throughput - 2nd knife row on rotor - Control cabinet with Siemens PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor is idle - Speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF panels, and other materials subject to testing and approval by the manufacturer. Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: naujas, Gamybos metai: 2026, * Production time approx. 4–5 months --- Our best-selling briquetting press series Bsdpfechqxxox Akuedd + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Briquetting offers the following advantages: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special Price: €29,970 net One machine is available immediately. This is the ideal machine for shredding voluminous, lightweight aluminium chips or turnings. Not suitable for more solid aluminium parts. Included: + Optimized cutting geometry + Adapted pusher control + Load-dependent hydraulic pusher (which presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation selectable (15 - 40mm) Bdjdogmh H Topfx Akuod Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Shredder raised by 30 cm (preparation for conveyor belt) +€2,990 net - Angle conveyor (discharge height approx. 220 cm) +€9,770 net - Overband magnet +€6,980 net - Control system for conveyor and overband magnet +€2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special-purpose machine for plastic shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, offcuts from wood pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Bdedpfxjd H R Sxo Akuod Includes: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between cutter and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control system: PLC Feed opening (top): 600 x 800 mm Recommended maximum material size: approx. 500 x 500 mm (*height less relevant) Hydraulically actuated pusher Screen perforation to choice (25–40 mm). For plastics, coarser screens (30–40 mm) are recommended. *If finer granulation is required, a two-stage shredding process with a downstream MVZ granulator (screens 5–15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Additional options for surcharge: - Shredder base raised by approx. 25 cm (prepared for conveyor discharge) + €1,980 net - Angle belt conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start and stop on conveyor + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metal and mineral contaminants such as sand or stones increase wear. We will gladly arrange a free trial with your material at our location in Neckartailfingen. Alternatively, you can ship your material to us, and we will document the test with photos and videos. --- *Only suitable for brittle plastics with medium hardness *Not suitable for elastic or extremely hard and heavy plastics, as this may affect machine durability. --- Larger machine versions available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Feed opening (top): 800 x 1,000 mm Max. material size approx. 720 x 700 mm (*height less relevant) From €39,995 net – options priced as required Base machine: Shredder MGZ 1030 K-S – 22 kW Feed opening (top): 1,000 x 1,000 mm Max. material size approx. 900 x 700 mm (*height less relevant) From €49,975 net – options priced as required Base machine: Shredder MGZ 1330 K-S – 37 kW Feed opening (top): 1,300 x 1,200 mm Max. material size approx. 1,200 x 700 mm (*height less relevant) From €79,975 net – options priced as required

Būklė: naujas, Gamybos metai: 2026, Delivery time: approx. 4–5 months Your advantages: + Extremely large cutting unit opening: 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW start-up power Technical data: Color: grey / blue Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65–125 Power requirement (kW): 37 Screen perforation (mm): 10–40 (selectable) Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions (LxWxH): 2,430 x 2,410 x 1,735 mm Weight (approx. kg): 3,500 Options at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics for increased throughput - Preparation for discharge conveyor - Discharge conveyor - Overband magnet HAWK-EYE Bsdpfogbkkrsx Akuodd *To shred veneer or paper (anything thinner than 3 mm), we recommend a segment floor. Special option, available at extra cost. --- Slider extension option *available at additional cost Maximum pallet size: up to 1200/1400 mm (with slider extension option, the upper cutting unit opening is 1300 x 1700 mm, surcharge: + €14,975) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (oven dry basis) must be below 20% - The feed material must be free from metals and mineral impurities. Tool damage and/or increased wear may otherwise result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Demonstration machine with approx. 9 operating hours One more machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput capacity We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple turning positions Option of double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% a.d. (absolutely dry basis) Bedpfxsb Ny Eys Akuodd Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC controller - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed 70-90 rpm for high throughput - Cycling control to minimize idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform. Optional shredder features at extra cost: - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or material thickness less than 3 mm) - Angled conveyor belt + €8,770 net Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overband magnet + €5,980 net Alternatively, fixed magnetic block over the conveyor belt for manual cleaning + €990 net (for low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronised with the shredder) Alternatively, manual start and stop of the belts + €595 net Material requirements: - Moisture content (a.d.) must be less than 30% - Installation temperature: heated area with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., lead to increased wear

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Bdsdsx Af Rdjpfx Akujd Requirements for input material: - Moisture content (atro) must be below 25% - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Bodpfedwktkjx Akujdd Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: naujas, Gamybos metai: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput capacity Options: Double blade row + €895 net Veneer and paper stripper + €970 net * Recommended for extremely thin materials with a thickness less than 3 mm Our mütek Single-Shaft Shredder MRZ 530 processes a variety of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine features a robust construction ensuring consistent quality in continuous operation. We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight forwarding and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Bedpfxjd Db N Ie Akusdd Hopper volume: approx. 0.4 m³, Throughput capacity: 1 - 5 hopper fillings/hour, Hydraulically operated pusher, Screen perforation as required (10 - 40 mm), Extraction connection Ø 160 mm, Weight: approx. 1,000 kg, Dimensions: approx. 1550 x 1100 x 1640 mm, Moisture content of raw material must be under 30% (absolutely dry). Standard equipment included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta starting • Automatic shut-off in case of rotor idle • Removable extraction chute • Speed 70 - 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (conveyor preparation): +€1,980 net - Angled conveyor belt: +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet: +€5,980 net - Control for conveyor belt and overband magnet: +€2,750 net (Start and stop each synchronized with the shredder) Requirements for input/raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multiple reversible Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Bdodpfx Asd Dgw Uokued Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star-delta start - fast hydraulic system - automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control for the hydraulic pusher - pertinax guides for the hydraulic pusher - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials (subject to testing and approval by the manufacturer) Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (upon arrival) must be below 30% - Installation temperature: heated indoor area, at least +5°C - Metal and mineral impurities such as sand, stones, etc., lead to increased wear

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced blade projection + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour *(dependent on screen size and material). Significantly higher throughput for smaller wood remnants. Motor: 22 kW; 400 V - 50 Hz - 3 ph Screen: 15/20 mm Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction port Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: System color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown in case of rotor idle - Speed 70-90 rpm for high throughput - Interval control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet Bedpfx Aodv Eu Hokusdd - CE compliant The following options are available at extra cost: *As shown in the last 2 images. - Additional blade row + €2,790 - Segmented floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (Consider for plastic shredding with screens smaller than 15 mm or high fines content. Not necessary if greasing the bearings with lubricant every ~4 weeks during operation) - Raise shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €5,980 net - Control unit for conveyor belt and overbelt magnet + €2,750 net (Start and stop synchronized with shredder) - Outward-stretched feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Material feed must be free of metals and mineral impurities. Damage to the tools and/or increased wear may occur as a result

Būklė: naujas, Gamybos metai: 2025, The ideal machine for shredding both hardwood and softwood. Another unit is now available (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 14+2 pieces, 40x40 mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as required (12–40 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm The following options are available at extra charge: - Additional knife row + €1,990 net (28 instead of 14) Bjdpjd E R D Sjfx Akusdd - Surcharge for segmented floor on all 4 sides + €2,170 net (prevents the pusher from jamming; recommended for material less than 3 mm thick) - Shredder raised by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely required; closed, extra sturdy rotor bearing. Worth considering for screens smaller than 15 mm or with a high proportion of fines. Not necessary if the bearings are lubricated with grease approx. every 2 weeks during operation) Raw material requirements: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via freight forwarding, and we will document the test with photos and videos.

Būklė: naujas, Gamybos metai: 2026, Ideali mašina minkštos medienos smulkinimui. . Variklis: 11/15 kW; 400 V - 50 Hz - 3 fazės, Rotoriaus skersmuo: 260 mm, hidrauliškai valdomas stūmiklis Kieto sieto angos pagal pageidavimą (12 - 40 mm) Ištraukimo jungtis Ø 160 mm Svoris apie 1.100 kg Išmatavimai (ixpxa) apie 1805 x 1118 x 1650 mm Spalva: mėlyna / pilka Bdodjwzarcopfx Akusd Reikalavimai žaliavai: - Drėgmės kiekis (absoliutus) turi būti mažesnis kaip 30 % - Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir pan., sukelia padidintą susidėvėjimą. . Maloniai kviečiame atlikti nemokamą bandymą su Jūsų medžiaga. Kviečiame Jus atvykti į Neckartailfingen. Taip pat galima, kad atsiųstumėte savo medžiagą per siuntų tarnybą, o bandymo eigą užfiksuosime nuotraukomis ir vaizdo įrašais.

Būklė: naudotas, Smulkinimo mašina MGZ 1330, 37 kW Darbo valandos: 275 Įskaičiuota: - 2-asis peilių eiliškumas - Greita hidraulika didesniam našumui - Paruošta konvejeriniam juostai Bdjdpfxsx Tfdhj Akued Pasirenkama: - Konvejerinė juosta su automatiniu metalo separatoriumi Jūsų privalumai: + itin didelė pjovimo agregato anga; viršuje: 1300x1200 mm + specialus rotorius, tinkamas tiek kietmedžiui, tiek minkštmedžiui + energiją taupanti ir galinga su 37 kW paleidimo galia Techniniai duomenys: Pajungimo anga viršuje (mm): 1.300 x 1.200 Piltuvo talpa (m³): 1,6 Rotoriaus skersmuo (mm): 368 Rotoriaus greitis (aps/min): 65–125 Galingumo poreikis (kW): 37 Sieto skylės (mm): pagal susitarimą Įrankiai: 37/70 peilių Ištraukimo antgalio Ø (mm): 200 Matmenys: 2430x2410x1735 mm (ilgis x plotis x aukštis) Svoris (apytiksliai kg): 3.500 --- Reikalavimai žaliavai: - Drėgnumas (atro) turi būti mažesnis nei 20 % - Tiekiama medžiaga turi būti be metalo ir mineralinių priemaišų. Priešingu atveju gali kilti įrankių pažeidimų ir/ar padidėti susidėvėjimas.

Būklė: labai geros būklės (naudotas), Katalogo numeris 7374 Bodpfx Akjzh H Tdsujdd TECHNINIAI DUOMENYS - Viršutinės įkrovimo piltuvo matmenys (ilgis/plotis): 840x620 mm - Apatinės įkrovimo piltuvo matmenys (ilgis/plotis): 300x300 mm - Rotoriaus plotis: 340 mm - Variklis: 22 kW - Sietas: 15 mm - Peilių kiekis: 6 vnt. - Susmulkintos medienos išleidimo anga: Ø 160 mm - Matmenys (ilgis/plotis/aukštis): 1400x800x2000 mm - Svoris: 840 kg PRIVALUMAI – Pagamintas Vokietijoje – Labai gera būklė – Naudotas smulkintuvas Grynoji kaina: 23 900 PLN Grynoji kaina: 5 690 EUR (priklausomai nuo 4,2 EUR kurso) (Kainos gali keistis svyruojant valiutų kursui)

Būklė: labai geros būklės (naudotas), Katalogo numeris 6726 TECHNINIAI DUOMENYS - Pakrovimo bunkerio įvadas: 280x300 mm - Susmulkintos medienos išvadas: Ø 310 mm - Rotoriaus darbinis plotis: 340 mm - Pagrindinis variklis: 22 kW - Peilių kiekis: 6 vnt. - Matmenys (I/P/A): 1300x1150x1680 mm - Svoris: 720 kg PRIVALUMAI – Labai gera būklė – Naudotas smulkintuvas Grynoji kaina: 19 900 PLN Grynoji kaina: 4 740 EUR Kaina apskaičiuota pagal 4,2 PLN/EUR kursą Bdsdpfezdz Rcsx Akued (esant didesniems kursų svyravimams kaina gali keistis)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Parduodamas profesionalus šveicariškas klijų agregatas Robatech RoBa 30 (Robatech AG CH-5630 Muri). Įrenginys pilnai veikiantis, pilnos komplektacijos ir paruoštas darbui. Puikiai tinka pakavimo linijoms, lankstymo-klijavimo mašinoms, kartoninėms uždarymo mašinoms ir kitiems įrenginiams, kuriems reikalingas tikslus karštų klijų tiekimas. Techniniai duomenys: * Modelis: RoBa 30 * Gamybos metai: 1984 * Našumas: 900 g/min * Maksimalus hidraulinis slėgis: 40 bar * Maksimalus oro slėgis: 5 bar * Didžiausia darbinė temperatūra: 200°C * Maitinimas: 240 V * Srovės suvartojimas: 10 A * Siurblio perdavimo santykis: 1:8 * Aiškiai įskaitoma vardinė lentelė, veikiantis manometras Bdsdsum Hufspfx Akusd Būklė: * Geros techninės būklės * Pilnas komplektas, nieko netrūksta * Šveicariška kokybė – labai patvari konstrukcija

Būklė: geras (naudotas), Sraigtinis knygrišio presas 40×30 su pagrindu Įrenginys visiškai veikiantis ir paruoštas darbui. Formatas: 400×300 mm Bsdpfjzdat Rsx Akuedd Slėgis: 3 tonos Pagaminta Vokietijoje.

Būklė: labai geros būklės (naudotas), KATALOGO NR. 7026 TECHNINIAI DUOMENYS - įėjimo plotis: 740 mm - įėjimo aukštis: 300 mm - veleno plotis: 780 mm - veleno skersmuo: 1000 mm - peilio ilgis: 780 mm - peilių kiekis: 2 vnt. - sieto matmenys: 55x55 mm - apačioje 4 dantyti traukiamieji velenai - apatinio veleno variklis: 5,5 kW - viršuje 3 dantyti traukiamieji velenai - viršutinio veleno variklis: 5,5 kW - juostinis padavėjas - padavimo juostos ilgis: 4300 mm - padavimo juostos plotis: 600 mm - juostos padavimo variklis: 2,2 kW - pagrindinis variklis: 90 kW - atbulinė pavara - automatinis reversas - bendri mašinos matmenys (ilgis/plotis/aukštis): 4600x2350x1700 mm - bendri padavimo įrenginio matmenys (ilgis/plotis/aukštis): 4550x980x970 mm - bendras svoris apie 11 000 kg – vokiška gamyba Bjdpszcbyvofx Akujdd - automatinis reversavimas (su reguliavimo galimybe) – naudotas smulkintuvas, labai gera būklė Grynasis kaina: 231 900 PLN Grynasis kaina: 55 200 EUR Kaina apskaičiuota pagal kursą 4,2 PLN/EUR (kai kuriais atvejais, esant didesniems kurso pokyčiams, kaina gali keistis)

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 8 h, Dar viena mašina – iškart prieinama! Labai tvirta mašina su didele spaudimo galia – tinkama gaminti net ir parduodamos kokybės briketus (priklausomai nuo žaliavos). Didelės apimties spaudimo cilindras ir 80 mm briketai tai leidžia. Mūsų perkamiausia briketavimo presų serija: + Patikrinta, paprasta technologija, užtikrinanti itin mažą gedimų tikimybę + 25 metų patirtis, nuolatinis tobulinimas ir žinios + Tūkstančiai naudojamų mašinų patenkintiems klientams + Puikus kainos ir kokybės santykis Papildoma kaina už aušinimo įrenginį: +4 995 € (be PVM), (galima sumontuoti ir vėliau) * Aušina presavimo žnyples ir hidraulinę alyvą (rekomenduojama, jei presas veikia ilgiau nei apie 3,5 valandos be pertraukos) Briketo skersmuo: 80 mm Priekinė įvorė: 125 mm Didžiausias briketo eiga: 100 mm Optimali briketo eiga: 80 mm Našumas (priklauso nuo žaliavos): iki 200 kg/val.* *priklauso nuo birumo tankio *skaičiuota pagal 200 kg/kub.m birumo tankį Variklio galia: 9,2 kW 400 V / 50 Hz / 3 fazės Ilgis: 2095 mm Plotis: 1600 mm Aukštis: 1700 mm Svoris: 1250 kg Alyvos kiekis: 220 l Siloso skersmuo: 1200 mm Siloso talpa: apie 1 m³ Siurblys: 75 l Hidraulinis išankstinis suslėgėjas Presavimo žnyplių aušinimas: taip, su papildoma aušinama presavimo žnyple Hidraulinės alyvos aušinimas: taip Presavimo žnyplių ir hidraulinės alyvos aušinimas su aušinimo įrenginiu (papildoma įranga) Pilnumo lygio kontrolės galimybė: taip Ištisinis briketas: taip (priklauso nuo žaliavos) Galimybė didesniam užpildymo slankikliui: taip, su papildoma įranga Atitinka CE reikalavimus Reikalavimai žaliavai: - Drėgmė turi būti nuo 6 iki maks. 15% Bdodpfexfwdjx Akujd - Kūdros ilgis ne didesnis kaip 20 mm - Darbo temperatūra: šildoma aplinka, ne mažiau kaip +5°C - Tiekiama žaliava turi būti be metalo ir mineralinių priemaišų, tokių kaip smėlis, akmenys ir pan. Priešingu atveju gali atsirasti presavimo įrankių pažeidimų ir/ar padidėti nusidėvėjimas.

Gamybos metai: 2010, būklė: geras (naudotas), Parduodame savo Asys kaupimo (buforo) sistemą. Tipas: FPS 30 B. Metai: 2008. Būklė: gera. Galima naudoti iš karto. Bdodpfx Ajyylqzokued

Būklė: geras (naudotas), Bandall BA 24/15-30 juostavimo mašina Viena iš žinomiausių juostavimo mašinų pasaulyje, rinkos lyderė. Pagaminta Bandall, Nyderlandai. Mašina labai geros būklės, neseniai aptarnauta. Pagaminimo metai: 2016 Mašina gali dirbti rankiniu arba automatiniu režimu. Gamybinė versija, skirta sunkioms apkrovoms. Mašina sumontuota ant atskiro rėmo su ratukais transportavimui. Dirba su jumbo ritiniais. Įdėjus medžiagą, mašina ją apvynioja juosta, suspaudžia ir užsandarina, sukurdama elegantišką pakuotę. Idealiai tinka vizitinėms kortelėms, lankstinukams ir kitiems gaminiams apvynioti. Bsdpfx Asy Sfayjkujdd Valdoma LCD paneliu. Techninė specifikacija: Juostos plotis: 30 mm Našumas: 36 ciklai/min. Mašinos angos matmenys: 320 × 160 mm Pridedama viena plėvelės ritė.