Briketavimo presas

Prodeco Nano E60 ECO

Sąlyga: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Blsdpfx Aasd H Sc Eohjd Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Sąlyga: naujas, Gamybos metai: 2025, Output: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Bedpfx Ajpfatpoahold Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Gamybos metai: 1977, Sąlyga: naudotas, Weiler Matador VS2 lathe, year of manufacture approx. 1977, with collets, collet tube, 3-jaw chuck, and Multifix toolpost. Ways show wear in the front section. The machine is in operational condition and can be demonstrated under power by appointment. Bledomdn Dxspfx Aahod

Sąlyga: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Bodpfx Aasgtm U Ajhold Feed motor power: 0.55 kW Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type carriage - Helical rack and pinion drive in X and Y axes, ball screw drive in Z axis for precise positioning - Machining dimensions: - Maximum support surface on nesting table: X = 3100 mm, Y = 1560 mm - Maximum travel ranges: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Maximum clearance height DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed - Vector speed: 128 m/min - X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drill unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shape arrangement - 5+4 in X and 4 in Y direction - 32 mm grid - Max. drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternate CW/CCW - n(max): 1000 - 4400 rpm, infinitely variable - Mounting: M10 thread, locating seat 11 mm - Without tools, without collets - 6 horizontal spindles: - 2 twin drill spindles in X direction - 1 twin drill spindle in Y direction - Mounting: M10 thread, locating seat 11 mm - Max. drill length: 63 mm from mounting end - Without tools, without collets - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm, infinitely variable - Maximum output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand rising locknut (for right-rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid) - Tool weight max. 6 kg (including holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standards - Safety fence at sides and rear - Vacuum pump: 500 m³/h, dry-running - Personnel safety by light barriers in the front machine area - Handheld remote control with the following functions: - Start/stop of machining programs - Machining cycle speed control - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software, 1x machine license including: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication Bljdpfx Aewka Upeahed - Automatic lubrication according to defined intervals - Additional sealing against dust via positive pressure in each guide carriage

Sąlyga: labai geros būklės (naudotas), Robland 3200 Silver Line panel saw with sliding table Scoring unit with separate motor, Sliding table length: 320 cm Main motor power: 7 kW 3 spindle speeds Max. blade diameter: 450 mm Bodev S Hy Aepfx Aahold Blade tilt (0–45°) electrically adjustable with digital readout Blade height adjustment electrically controlled, no digital readout Rip fence on right, motorised adjustment up to 1240 mm Digital readouts on sliding table fence Mitre gauge included Branded machine in very good condition,

Sąlyga: naujas, Gamybos metai: 2026, Technical data: • Extraction capacity ~ 5200 m³/h • Motor power 3.0 kW • Speed 3000 min⁻¹ • Voltage 400 V, 50 Hz • Extraction connection 250/200 mm • Filter area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300 kg • Filter category G • Filter material Polyester • Noise level 80 dB (without connection), 65 dB (when connected to the machine via a duct) Scope of delivery: • Complies with H-2 standard • Polyester filters, 5 microns Bodpfx Aajd H Rf Tsheld • 2 containers • Undercarriage • Filter cleaning with vibration system and control unit + €850 for models with fire extinguisher (Safe System)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Bodpfx Aodqzcxoahjld Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm Bsdporigxysfx Aahold - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Sąlyga: paruoštas naudoti (naudotas), With hydraulic pump. Bedpfx Ajhw E D Sjahold