Biesse Rover 30 pirkti naudotą (325)

Būklė: nepatikrintas (naudotas), Gamybos metai: 2016, Funkcionalumas: nepatikrintas, briaunos storis (maks.): 22 mm, sukimosi greitis (maks.): 12 000 aps./min, Įranga: CE žymėjimas, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge edge strip magazine glue pot for EVA hot-melt adhesive premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine trimming and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off saw unit RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 22 mm MACHINE DETAILS Total connected load: 22 kW Lhedpfoyxndbsx Am Rjl EQUIPMENT Pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 7673

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, ruošinio plotis (maks.): 1 300 mm, ruošinio ilgis (maks.): 3 200 mm, briaunos storis (maks.): 3 mm, Įranga: CE žymėjimas, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Min. panel height: 10 mm Max. panel height: 60 mm Min. panel length: 320 mm Max. panel length: 3,200 mm Min. panel width: 150 mm Max. panel width: 1,300 mm Min. edge thickness: 0.3 mm Max. edge thickness: 3 mm Number of working units: 8 UNITS Lhodpfx Asxw T Tpjm Rsl Trimming Unit 1 Unit: Trimming corrections Model: RT30 Motor power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Unit: End trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Edge milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Edge scraper Model: RB40 Edge Processing Unit 5 Unit: Glue scraper Model: RC20 Edge Processing Unit 6 Unit: Brush Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Total installed power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutter Multifunction unit Top pressure Pressure by rubber-coated belts Panel support guide NC positioning Panel introduction system at an angle Automatic engagement by time Edge heating lamps Coil magazine Glue pot for hotmelt adhesive Prefuser for hotmelt adhesive Edge press roller track Spraying unit Machine programming software: SINTRA Panel ejection with transfer roller track Panel feed with motorized conveyor belt Part return for left-hand edge bander CE marking

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, galia: 40 kW (54,38 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: elektrinis, X ašies padavimo greitis: 30 m/min, Įranga: CE žymėjimas, dokumentacija / vadovas, Biesse STREAM B MDS 2.0/15.0 Ledpfoyu S Iuex Am Rshl

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: 89867, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 765 mm, Y ašies eiga: 1 875 mm, Z ašies eigos atstumas: 324 mm, įrankių magazino lizdų skaičius: 12, bendras svoris: 4 000 kg, TECHNINĖ INFORMACIJA X ašies darbo sritis: 3 765 mm Y ašies darbo sritis: 1 875 mm Z ašies darbo sritis: 324 mm Stalo ilgis: 3 600 mm Stalo plotis: 1 800 mm Įrankio tvirtinimo sistema: HSK-F63 Įrankių keitiklio vietos: 12 vnt. STAKLIŲ DUOMENYS Frezavimo spindelių skaičius: 1 vnt. Lhedpfxsy Nxybj Am Rel Svoris: 4 000 kg Transportavimo paketai: 1 vnt. ĮRANGA Plokščias stalas BiesseWorks sistema/programinė įranga Saugos kilimėlis Gręžimo įrankis yra Pjovimo įrenginys yra Etikečių klijavimo aparatas Pakrovimo sistema Iškrovimo sistema

Būklė: labai geros būklės (naudotas), PC valdymas, tipas NC 500 (programinė įranga Tooling System) Nr. 2 varomieji pratekamieji konvejeriniai diržai Nr. 2 horizontalios gręžimo atramos Nr. 2 gręžimo agregatai ant kiekvienos horizontalios gręžimo atramos Maks. darbinis plotis (mm) 3200 - Min. darbinis plotis (mm) 205 (apytiksliai) Nr. 8 apatinės vertikalios gręžimo atramos Nr. 2 gręžimo agregatai ant kiekvienos apatinės vertikalios atramos Nr. 4 viršutinės vertikalios gręžimo atramos Nr. 2 velenai kiekvienam viršutinių gręžimo agregatui Ljdpfeyvrrqjx Am Rshl Nr. 5 viršutiniai vertikalūs ruošinio spaustuvai Nr. 2 be galo varomosios drožlių transportavimo sraigės Skaitmeninis padėties rodmuo (ašis) Bendra prijungimo galia (kW) 48 CNC valdymas kontroliuoja (X ašies) horizontalių gręžimo atramų judėjimą CNC valdymas reguliuoja transportavimo juostų (X ašies) judėjimą CNC valdymas reguliuoja atramų (Y ašies) judėjimą CNC valdymas kontroliuoja visų vertikalių gręžimo atramų (Z ašies) judėjimą

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, TECHNINĖS CHARAKTERISTIKOS Maksimalus apdailos medžiagos storis: 12 mm Maksimalus plokštės storis: 60 mm Maksimalus volelių medžiagos storis: 3 mm Minimalus apdirbamo gaminio ilgis: 140 mm Minimalus apdirbamo gaminio plotis: 50 mm Padavimo greitis: 12–18 m/min. Padavimo greitis: bepakopinis Aukščio reguliavimas: variklinis Klijų sistema: granulės Klijų talpa: viršuje Skerspjūvio pjūklio agregatas: 2 varikliai Kampų kopijavimo agregatas: 2 varikliai Lygios, apvalios arba nupjautos kraštų apdirbimo stotelės: 1 Konstrukcija: kairės pusės mašina MAŠINOS CHARAKTERISTIKOS Valdiklis: BIESSE SMART TOUCH 23" Bendroji prijungimo galia: 13 kW Matmenys ir svoris Mašinos ilgis: 5610 mm Svoris: apie 2250 kg Ledpfx Amjzktque Rshl ĮRANGA Diržo prispaudimas Greito keitimo klijų talpa Tinka PUR klijams Juostų konteineris Purškimo įtaisas Frezavimo agregatas Prieššildymo zona Prispaudimo zona: valdoma CNC Profilio traukiamasis peilis, plokščio traukiamasis peilis Šlifavimo agregatas „Nesting“ įranga CNC ašys Profilio keitimas: automatinis Atitikties žymėjimas: CE ženklas, EAC ženklas

Būklė: labai geros būklės (naudotas), NC 400 tipo kompiuterinė valdymo sistema. Automatiniai transportuojantys konvejerio diržai (Nr.) 2. Horizontalaus gręžimo laikikliai (Nr.) 2. Gręžimo galvutės kiekvienam horizontalaus gręžimo laikikliui (Nr.) 2. Velėnos kiekvienai horizontalaus gręžimo galvutei (Nr.) 10. Ledpfjzk Euljx Am Rohl Maksimalus apdirbimo plotis (mm) 3200 – minimalus apdirbimo plotis (mm) 205 (apytiksliai). Apatiniai vertikalūs gręžimo laikikliai (Nr.) 4. Gręžimo galvutės kiekvienam apatiniam vertikaliam gręžimo laikikliui (Nr.) 2. Viršutiniai vertikalūs ruošinio laikikliai (Nr.) 2. Skaitmeninis padėties duomenų ekranas. Bendroji prijungimo galia (kW) 23,7. CNC valdymo sistema valdo horizontalaus gręžimo laikiklio judėjimą (X ašis). CNC valdymo sistema valdo judėjimą (Y ašis) atramų.

Būklė: geras (naudotas), Elektroninis pravažiuojantis automatiškai centruojantis spaustuvas NC400 valdymas Baldų matmenys: Ilgis: min. 250 mm, maks. 2500 mm Plotis (gylis): nuo 180 mm iki 780 mm Aukštis: mažiausiai 300 mm, daugiausia 1300 mm Lsdozfpuljpfx Am Rehl

Būklė: labai geros būklės (naudotas), Complete factory for furniture production, consisting of: KZ2207) "BIESSE" FDT – CNC drilling and dowel-inserting line, comprising: Depalletizing station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel-inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) 4-sided sizing and edge-banding line "HOMAG", comprising: Depalletizing double stations "ESSE2", 1st double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", loading double stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vector CNC LINE for Drilling, Milling, and Inserting, comprising: Hedgehog loader (18 positions), CNC Vector GLR 30-13, Vector XL 40-30, Idrak-3, various transfer units KZ2090) Sanding machine (veneer sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with destacking-feed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with continuous case clamp KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter/rip saw) with destacking "ESSE2" KZ2009) Veneer department (double-knife veneer pack cutter "MONGUZZI", crosscutting shear "MONGUZZI"; splicing machine "KUPER", veneer bundle cutter "TAGLIABUE", etc.) Lsdeh T Dvtopfx Am Rjhl KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminated panels KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelves (wall racks), forklifts, pallet trucks, and much more. The machines are still installed at the user's site and can be viewed by appointment.

Būklė: labai geros būklės (naudotas), COMPLETE 4-SIDE EDGE PROCESSING AND EDGE BANDING LINE, max. working width 3000 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X03001A) Feeding gantry (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided formatting and edge banding machine "BIESSE" Stream SB 1 - 7.5 Lodpfx Aei Rbg Tom Rshl X03001C) Workpiece rotation device (90° LONGITUDINAL-CROSS) "RBO" Model GPK 1 X03001D) 2nd double-sided formatting and edge banding machine "BIESSE" Stream SB 2 - 11 X03001E) Workpiece rotation device (90° CROSS-LONGITUDINAL) "RBO" Model GPK 2 X03001F) Stacking gantry (with 2 unloading stations) "RBO" Model Winner S 3200

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: 65352, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 765 mm, Y ašies eiga: 1 585 mm, Z ašies eigos atstumas: 170 mm, ašių skaičius: 3, įrankių magazino lizdų skaičius: 12, TECHNINĖS CHARAKTERISTIKOS Frezavimo velenas Valdomų ašių skaičius: 3 Įrankio laikiklis: ISO 30 Variklio galia: 1,7 kW Gręžimo įrenginys Gręžimo įrankis: yra Vertikalių gręžimo velenų skaičius: 10 vnt. Stalas ir darbinė zona Frezavimo stalo tipas: plokščias stalas Stalo ilgis: 3750 mm Stalo plotis: 1560 mm Darbinė zona (X ašis): 3765 mm Darbinė zona (Y ašis): 1585 mm Darbinė zona (Z ašis): 170 mm Maksimalus Z ašies eiga: 324 mm Medžiagos tvirtinimo sistema: pneumatinė Lhedpfx Aszuwt Ijm Rjl Įrankių keitiklis ir valdymas Įrankių keitiklio vietų skaičius: 12 vnt. ĮRENGINIO CHARAKTERISTIKOS Sistema/programinė įranga: BiesseWorks Vakuuminis siurblys Gamintojas: Busch Tipas: MM1322AVM Talpa: 360 m³/h Jungties skersmuo: 60 mm Be alyvos: taip Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 5600 x 2250 x 2550 mm Išdėtas ilgis: 6465 mm Išdėtas plotis: 4794 mm Išdėtas aukštis: 2550 mm Transportavimo svoris: 2500 kg Transportavimo pakuočių skaičius: 2 vnt. KOMPLEKTACIJA Į komplektą įeina: Įrankiai Vakuuminis siurblys Busch MM1322AVM Apsauginis kilimėlis CE ženklinimas

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: BM0000029, valdiklio modelis: WINDOWS XP, ašies skaičius: 42, plokštės aukštis: 60 mm, plokštės ilgis: 2 800 mm, plokštės plotis: 1 300 mm, No reserve price – guaranteed sale to the highest bidder! Vertical CNC machining centre for drilling, milling, and dowelling, equipped with an additional robotic arm for automated material handling! Machine pick-up must take place between 10.06.26 and 30.06.26! The machining centre consists of the following two units: Lhedpfsy Uvnaox Am Rsl 1. BIESSE BREMA VEKTOR 15-18 R X-axis working range: 2,800 mm Y-axis working range: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel passage height: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles on X axis Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles on Y axis Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes (milling spindle): 3 Automatic tool changer: Yes Number of tool magazine stations: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC certification Safety system: Light curtain 2. KUKA KR 180 L100-2 K 2000 Max. panel width: 1,300 mm Max. panel length: 2,800 mm Max. payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system HONEYWELL barcode scanner Protective netting on the machine The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External reference: 8530

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 90 mm, ruošinio plotis (maks.): 3 200 mm, ruošinio ilgis (maks.): 3 200 mm, briaunos storis (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finishing cutters, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom rough trimming Fine trimming for bevel and radius Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spraying device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm EQUIPMENT Conveyor chain with pushers Pressure system with rubber band Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spraying device mounted on upper cabinets The machine is sold and delivered in its current factual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685 Lhjdpfxjyq Avhe Am Rel

Būklė: naudotas, Gamybos metai: 2019, Numerical smart-touch control with Sintra HD software Panel height: 10 - 60 mm 22 mm solid wood PVC / ABS up to 3 mm Feed speed up to 25 meters/min Working height electronically adjustable via CNC Powered pressure belt with increased pressure Motorized and electronically adjustable panel guide via CNC Side roller conveyor with support rollers for panels ADZ-700 anti-adhesive group Rectifier unit with 2 electronically controllable motors via CNC FI-502 Panel edge heating lamps AdIRL-700 Lhodpor Ip Sdsfx Am Rol Roll holder plate in 1 position Gluing unit for EVA hot-melt adhesive with QM-705 glue pot Additional glue tank Edge pressure station for straight profiles with electronically adjustable pressure rollers via CNC Anti-adhesive group End trimming unit with 2 motors IN-801 Top/bottom trimming and finishing unit with 2 motors, electronically adjustable via CNC RF400 PRO-NESTING KIT for finishing unit Anti-adhesive group Corner rounding unit with 2 multifunction motors (profile + corner rounding) AR30 NC LPT-700 anti-adhesive liquid application system Electronic edge scraper, electronically adjustable via CNC RB400 PRO-NESTING KIT for edge scraper blade RCC-701 glue scraper unit Brush unit 'SP-501' Telephone support module 'PH-700'

Būklė: naudotas, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first and second machine in a squaring and edge banding line. Numerical control with Sintra software Machine designed for first and second panel pass Motorized, CNC-controlled movable side opening 3000 mm Panel height 60 mm PVC/ABS up to 3 mm Continuously adjustable feed speed via CNC (up to 40 m/min) Electronically adjustable working height via CNC (up to 60 mm) Electronically adjustable movable side opening via CNC Motorized high-pressure rubber belt Support rail with concealed pins – spacing between pins 500 mm Automatic system for large panel support Anti-adhesion unit Squaring section consisting of (for each side): * Automatic, timed anti-splintering unit * Double scoring unit Lhedpfx Amsu Rim He Rjl * Twin-motor pre-milling unit Edgebanding section consisting of (for each side): * EVA hot-melt adhesive application unit with premelter * Straight profile pressure roller unit with CNC electronically adjustable rollers * 6-position coil magazine with automatic edge changeover via CNC * Trimming unit with 2 motors and automatic tilt adjustment * Overlapping trimming group with 2 motors * Corner rounding unit with 2 electronically adjustable tilt motors via CNC * Multifunction corner rounding unit with 4 motors (trimming + corner rounding) with automatic numerical control * Milling group (with 2 motors on the fixed left side and 1 motor with 0-90° tilt on the movable right side) * Edge scraper unit, CNC electronically controlled * Glue scraper unit * Oscillating brush unit * Hot air blower unit

Būklė: geras (naudotas), Gamybos metai: 2013, Stärke der Kante: Rollen 0,4/3 mm / Streifen 0,4/22 mm Ledpfeu Hldmex Am Rjhl Werkstückdicke: 10–65 mm Werkstücküberstand: 140 mm Vorschubgeschwindigkeit: 10-14-18-20 m/min Ausstattung: - Doppelte Eckenkopiereinheit - Leimeinheit - Anfräsaggregat - Grobfräseinheit - Feinfräseinheit - Profilfräseinheit - Universalfräseinheit - Flachziehklingeneinheit - Kantenpoliereinheit - „Sintra“ Steuerungseinheit Abmessungen (L x B x H): ca. 7000 x 1400 x 2100 mm Gewicht: ca. 3600 kg Maschinennummer: 94391 Baujahr: 2013 CE

Būklė: naudotas, mašinos/transporto priemonės numeris: 007289, Darbinis plotis X ašis: 3200 mm Darbinis plotis Y ašis: 900 mm Lhodpfx Amswukyqs Rol Pagrindinio veleno galia: 4,5 kW Valdomų ašių skaičius: 3 ašys Gręžimo veržliarakčių skaičius: 16

Būklė: labai geros būklės (naudotas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lhodegk T Ttspfx Am Rol Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per drilling unit of the upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axes) Total connected load (kW) 48 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops.

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: Lhsdpshvah Nsfx Am Rsl A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Būklė: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° - Pre-milling unit RS 10 (2 x 2 kW) - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) Ledpfx Aju Rc Anem Rohl - Buffing unit SZ 30 (0.37 kW x 2)

Būklė: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Lhsdeu Rc Hyopfx Am Rol Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED DESTACKER - Bridge design Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage running on it) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 external roller conveyors for stacking of panels from the destacker No. 1 external motorized roller conveyor from destacker, also with belt drive for 90° panel transfer. Dimensions: 7168 mm (approx.) Lodpfod Rg Dzox Am Rjhl Separate electrical control panel OMRON electronic control system Perimeter safety fence with safety mats Operating capacity (cycles/min): approx. 16 - 20 Panel thickness (min/max): approx. 10 – 50 mm Min. panel size: approx. 250 x 320 mm Max. panel size: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Būklė: labai geros būklės (naudotas), Double-sided FORMATTING AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Roll material (edge) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control system/software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam spacing (mm): 500 FORMATTING UNITS (per side): Protective cutter (pre-milling) AS 10 (1 x approx. 5.2 kW) 2 x hogging units DT 10 (2 x approx. 5.8 kW) Spray system (for liquid anti-adhesive) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge Control EC40) Edge pressure section (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (2 x approx. 0.3 kW) 28 m/min (0° - 25°) Pre-milling unit RS 10 (2 x 0.75 kW) Multi-profile milling unit (CNC controlled) RF 30 (2 x 0.37 kW) 0°-25° Multi-functional unit (radius milling and contour processing) AR 30 (2 x 0.35 kW) Left: 2 x universal milling units for grooving/rebating and profiling FB 32 (2 x 5 kW) 0°- 90° Right: Universal milling unit for grooving/rebating and profiling FB 30 (1 x 5 kW) 0°- 90° Profile scraping unit RB 10 Flat scraping unit RC 10 - spray units (for polishing fluid) Ljdpfxoywk Els Am Rshl Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) Hot air blower - edge trimmer PH 10 OPTION: D.O.M. stacker with support column and mobile jib (with vacuum suction pads) for unloading and stacking of edge-processed panels.

Būklė: labai geros būklės (naudotas), Electronic machine, CNC-controlled. PC control unit type NC 500 - Tooling System software. No. 2 powered through-feed conveyor belts - Feed speed (m/min): approx. 35 - 75 Max. working width (mm): 3200 - Min. working width (mm): 215 No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support (11 spindles per drilling unit) No. 5 lower vertical drilling supports Drilling units per lower vertical drilling support: 2 x 1.8 HP No. 2 upper vertical drilling supports Spindles per upper drilling support unit: 2 x 1.8 HP No. 4 upper vertical workpiece clamps. No. 2 screw (endless) conveyors for chip removal Digital display for positional data (axes). Total connected load (kW): 62.7 The CNC system controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axes Y1 and Y2) of the drilling units CNC controls the movement (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the conveyor belts The CNC control manages all programming of automatic work cycles Lhodpfxoyyw S Ro Am Rjl

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: 55595, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 60 mm, bendras svoris: 3 000 kg, valdiklio modelis: Xp 600, TECHNINĖS DETALĖS Darbinė sritis X ašis: 3.000 mm Darbinė sritis Y ašis: 1.000 mm Darbinė sritis Z ašis: 60 mm ĮRENGINIO DETALĖS Valdymas: Xp 600 su Biesse Works programine įranga Lhjdjydk Rmopfx Am Rel Svoris: 3.000 kg ĮRANGA Automatinė pakrovimo sistema su motorizuota juostine konvejerio sistema 2 spaustuvai plokštės fiksavimui ir transportavimui 1+1 vertikalus elektros variklis (apatinis ir viršutinis) su 3 ašimis 1+1 nepriklausomas pjūklas (apatinis ir viršutinis) 29 + 29 nepriklausomi gręžimo velenai vertikaliam gręžimui X ir Y kryptimis (viršuje ir apačioje) 10 + 10 nepriklausomų velenų horizontaliam gręžimui X ir Y kryptimis (viršuje ir apačioje) Automatinė iškrovimo sistema su motorizuota juostine konvejerio sistema