BIESSE APDOROJIMO SUBJEKTAS

BIESSE

Būklė: nepatikrintas (naudotas), Gamybos metai: 2009, Funkcionalumas: nepatikrintas, ašių skaičius: 4, stalo ilgis: 4 300 mm, stalo plotis: 2 200 mm, ašies skaičius: 40, įrankio skersmuo: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X direction: 6 Number of spindles for horizontal drilling in Y direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of slots in tool magazine 1: 22 Number of slots in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS Lhjdsyq Ez Tepfx Agfod EQUIPMENT Automatic panel loading system Automatic panel stacking system Lifting table Transport system Vacuum pump Note: The safety fences at the rear and at the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 90 mm, ruošinio plotis (maks.): 3 200 mm, ruošinio ilgis (maks.): 3 200 mm, briaunos storis (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finishing cutters, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom rough trimming Fine trimming for bevel and radius Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spraying device TECHNICAL DETAILS Ledpfx Aeyq Avhogfjhd Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm EQUIPMENT Conveyor chain with pushers Pressure system with rubber band Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spraying device mounted on upper cabinets The machine is sold and delivered in its current factual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Būklė: nepatikrintas (naudotas), Gamybos metai: 2011, Funkcionalumas: nepatikrintas, X ašies eiga: 6 200 mm, Y ašies eiga: 1 935 mm, ruošinio aukštis (maks.): 250 mm, ašių skaičius: 4, ašies skaičius: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness for edge banding unit: 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X direction: 4 Number of horizontal drilling spindles in Y direction: 8 Total number of drilling spindles: 40 Total number of tool change positions: 22 Number of suction beam traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Ljdpfx Aoyqzrnegfehd Edgebanding unit Gluing unit Tool magazine Grooving unit Number of slots in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documentation of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 8011

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, X ašies eiga: 3 200 mm, Y ašies eiga: 1 300 mm, ašies skaičius: 21, greitas poslinkis X ašimi: 80 m/min, greitas poslinkis Y ašis: 60 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 60 m/min Traverse speed Z-axis: 25 m/min Number of suction traverse beams: 6 Spindles Number of vertical drilling spindles: 15 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 2 Total number of spindles: 21 Lhodpfxsytr Rye Agfed Milling unit Number of axes: 3 Max. rotational speed: 24,000 rpm Motor power: 9 kW Tool turret Number of positions: 10 MACHINE DETAILS Total power consumption: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling tools are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side is missing). The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8174

Būklė: naudotas, Gamybos metai: 2005, Biesse Comil Cosmo NK karkasinė presė Pagaminimo metai: 2005 Presės matmenys: 2500 x 1300 mm Presavimo ciklas: automatinis Presės tipas: motorizuota Variklio galia: 3,7 kW Presavimo slėgis: 12 000 N (Nors dedame dideles pastangas dėl pateikiamų duomenų tikslumo, galimi pakeitimai, techninių duomenų, kainų bei visos pateiktos informacijos klaidos (taip pat spausdinimo klaidos). Spausdintų duomenų tikslumas negarantuojamas! Galimybė įsigyti priklauso nuo parduotų prekių.) Kainos be reklamos kaštų MachineSeeker / Kainos be skelbimo mokesčių MaschinenSucher Lsdpfxsywxzze Agfohd Geriausios medienos apdirbimo staklės iš Nyderlandų

Būklė: naudotas, Gamybos metai: 2014, Biesse Rover B G 2231 FT komplett mit Be- und Entladesystem Beschreibung: Arbeitsbereich X in Y: 3100 x 2205 mm Flachtisch Anzahl der Achsen Fräsmotor: 3 Keine Bohraggregat Werkzeugaufnahme: HSK 63 Wechsler: Fest mit 21 Plätzen Vakuumpumpen: 2 x 300 m³ Schutzzäune Office-Softwarelizenz Ein- und Auslauftisch (für Vakuumheber geeignet) Abschiebearm Einlauflineal B-Solid Presetter Detaillierte Beschreibung auf Anfrage Ljdpfxew Hf A Rj Agfohd (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer in den technischen Daten, Preisen und sonstigen Angaben vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden Die beste gebrauchte Maschinen aus den Niederlanden

Būklė: geras (naudotas), Gamybos metai: 2017, Kliento vardu siūlome parduoti apie 10 metų senumo Biesse įrenginį, geros būklės. Puiki investicija pradedant naują gamybą su nedideliu biudžetu. Lhedpfoywup Usx Agfed

Būklė: naudotas, Gamybos metai: 2012, bendras aukštis: 2 400 mm, bendras ilgis: 13 500 mm, bendras plotis: 2 450 mm, Net weight: 2,500 kg Biesse Rover A1536 G FR Year of manufacture: 2012 Central lubrication FT working table, X 3765 Y 1560, 9 zones 12 kW electrospindle, ISO 30, air-cooled Biesse WORKS Biesse NEST MODULE Air conditioning 16-position turret tool changer Lhsdpfxswnip Do Agfjd Working area XYZ 3765*1585*170 2x vacuum pumps 250 m³ C-axis 360° BH 17 L drilling unit Including loading and unloading system - Year of manufacture: 2012 - Documentation available: Yes - Type of documentation: User manual, electrical diagrams - Format: Paper - CE marking present: Yes - CE certificate available: No - Serial number: 81399 - Type of router table: Flat table - Drilling unit available: Yes - Horizontal drilling spindles [qty]: 4 - Vertical drilling spindles [qty]: 7 - Saw unit available: Yes - Tool changer positions [qty]: 16 - Vacuum pump available: Yes - Number [qty]: 2 - Brand: Becker - Capacity [m³/h]: 250 - Working area X [mm]: 3765 - Working area Y [mm]: 1585 - Working area Z-axis [mm]: 170 - Transport dimensions: 13,500 mm x 2,450 mm x 2,400 mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages: 4 Financial information VAT: The stated price is exclusive of VAT VAT/Differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Glenn Smeets

Būklė: naudotas, mašinos/transporto priemonės numeris: 007871, Max. panel width: 1200 mm Max. panel length: 3200 mm Max. panel stack height above floor: 1600 mm Lhsdpewimzmefx Agfod Movement system: with suction elements

Būklė: naudotas, mašinos/transporto priemonės numeris: 008359, Darbo sritis X ašyje: 2500 mm Darbo sritis Y ašyje: 1320 mm Darbinis paviršius: su vakuuminėmis konsolėmis Pagrindinio verpstės galia: 13 kW Lodjx Swcaepfx Agfohd Valdomų ašių skaičius: 4 ašys Gręžimo verpstės skaičius: 16 Įrankių vietų skaičius: 22