Biesse Rover 30 pirkti naudotą (325)

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edging material (edge) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam spacing (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling): AS 10 (5.8 kW) - 2 x Chipper DT 10 (5.8 + 5.8 kW) - Spray system (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt Glue + Pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (No. 6 positions) - End trimming unit IT 90-S (0.3 kW x2) 28 m/min, 0 - 25°, PNEUMATIC - Multi-profile milling unit (CNC controlled) RF 30 (0.65 kW x2) 0 - 25° - Multifunctional unit (radius milling and contour milling unit) AR 80 (0.3 kW x2) 25 m/min – ROTAX Iodpfx Afsu Tg Uqj Ietb - Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraping unit (CNC controlled) RB 30 Flat scraper unit RC 20 – spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x2) With 'hopper' for panels (usable height mm 80), serves as buffer to accelerate work cycles

Sąlyga: labai geros būklės (naudotas), Longitudinal panel saw (splitter) for grooving and/or cutting a single panel into two parts Isdpfxeu Tqb Us Af Ijtb - Min. panel length: 500 mm - Max. panel length: 2700 mm - Min. panel width: approx. 300 mm - Max. panel width: 700 mm - Panel thickness (min./max.): 10 / 30 mm - Max. feed speed: 50 m/min (4 kW) - Total installed power: 43.2 kW The machine consists of the following units: POS. 1: Milling unit for underside grooving (7.4 kW), max. diameter 300 mm POS. 2: Lower scoring saw (7.4 kW), max. diameter 350 mm POS. 3: Upper scoring saw (7.4 kW), max. diameter 350 mm POS. 4: Lower main saw blade (separator/ splitter blade) (7.4 kW), max. diameter 350 mm

Sąlyga: labai geros būklės (naudotas), PC control system type NC 400 Deluxe No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support Number of spindles per horizontal drilling unit: 20 Ijdporm Ik Tofx Af Istb Maximum working width (mm): 3200 Minimum working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical workpiece clamps No. 2 chip removal conveyor belts Total connected load (kW): The CNC control manages the movement (X-axis) of horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Complete factory for furniture production, consisting of: KZ2207) "BIESSE" FDT – CNC drilling and dowel-inserting line, comprising: Depalletizing station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel-inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) 4-sided sizing and edge-banding line "HOMAG", comprising: Depalletizing double stations "ESSE2", 1st double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge-banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", loading double stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vector CNC LINE for Drilling, Milling, and Inserting, comprising: Hedgehog loader (18 positions), CNC Vector GLR 30-13, Vector XL 40-30, Idrak-3, various transfer units KZ2090) Sanding machine (veneer sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with destacking-feed "ESSE2" Itjdpfsh T Dvtox Af Iob KZ2075) Furniture assembly line "TERMOPAK" with continuous case clamp KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter/rip saw) with destacking "ESSE2" KZ2009) Veneer department (double-knife veneer pack cutter "MONGUZZI", crosscutting shear "MONGUZZI"; splicing machine "KUPER", veneer bundle cutter "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminated panels KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelves (wall racks), forklifts, pallet trucks, and much more. The machines are still installed at the user's site and can be viewed by appointment.

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: O03009A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno Logic, with CNC control No. 2 through-feed motorised belts, feed rate up to 75 m/min. No. 2 horizontal drilling units (each with 2 drilling heads of 1.8 HP each and 22 drilling spindles each); No. 5 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 3 upper drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 5 upper vertical workpiece clamps. Iodpfx Afow Uhbkj Ietb No. 2 (endless) screws for chip removal. PC control, type CNI. O03009B) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno INFOR with CNC No. 2 through-feed motorised belts, feed rate up to 75 m/min No. 2 horizontal drilling units (each with 6 horizontal supports – gluing and dowel insertion tools) No. 2 lower drilling units (each with 2 split and reversible drilling heads of 1.8 HP each and various drilling heads each); No. 2 upper vertical workpiece clamps. No. 2 (endless) screws for chip removal.

Sąlyga: labai geros būklės (naudotas), PC control type NC 400, Biesse software No. 2 throughfeed motorized conveyor belts Feed speed (m/min) 35 - 75 No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support (No.) 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Total connected load (kW) CNC-controlled movement (X-axis) of the horizontal drilling supports CNC-controlled movement (Y-axis) of the stops Isdpsd Nuwisfx Af Iotb

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and soundproof cabin Manual side adjustment of unit carrier Cam pitch (mm): 500 SIZING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW) 2 x hoggers DT 10 (5.8 + 5.8 kW) Spraying device (for liquid anti-adhesive) EDGEBANDING SECTION (for each side): Gluing unit (hot-melt glue + premelter) SP30 (High Melt + Edge Control EC 40) Edge pressure section (CNC controlled). Edge magazine for rolls (No. 6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°. PNEUMATIC Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multifunction unit (radius and form milling unit) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool changer (tools) 2 universal milling units for grooving, rebating, and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC controlled) RBK - 503 (2 positions) Itsdjhvahhjpfx Af Ieb Flat scraper unit RC 20 Spraying unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: Itedshvah Njpfx Af Ieb A) FEEDING STATION (gantry) "RBO" Model Advantage C 320 double station, complete with central motorized roller conveyor. B) ROTARY TRANSFER UNIT (longitudinal/crosswise) with double cone "RBO" Model GPK-1 C) Double-sided sizing and edge banding machine "BIESSE" Model Stream SB2 11.0 D) ROTARY TURNER (180° inversion, top face down) "RBO" Model Ribaltatore E) ROTARY TRANSFER UNIT (crosswise/longitudinal) with double cone "RBO" Model GPK-2 F) STACKING STATION (gantry) "RBO" Model Advantage SC 3200 double station, complete with central motorized roller conveyor.

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (First machine in a production line) Edge banding material (thickness min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 270 - 1200 Control / Software: SINITRA Feed speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and noise protection cabin Side adjustment of aggregate carrier: manual FORMAT PROCESSING (each side): 2 x Hogger DT 10 (5.8 kW x 2) Space for jointing unit FS Jointing aggregate ES30 + ER30 (5 kW x 2), 0° - 90° Universal milling unit Softforming SF 10 (2 x 2.4 kW), 0° - 45° Spraying device (for liquid non-stick agent) EDGE BANDING SECTION (each side): Edging unit (Hot-melt glue + pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Ijdpfx Afet N Ix Rs Iotb Preheating RP 10 Edge pressure zone (CNC controlled) Pressure roller track (revolver) for straight and shaped (softforming) edges Soft PF40 (4 positions), 800 mm (Shears CI10+CS10+RL10) - Edge magazine for coils (no. 6 positions) Milling unit RS 10 (1.3 kW x 2) Milling unit Softforming RF 10 / SF (0.65 kW x 2) Multi-profile milling unit RF 30 (0.65 kW x 2) Universal milling unit for grooving/rabbetting and profiling FB 30 (4.5 kW x 2), 0 - 90° Multi-profile scraper unit RB 30 Flat scraper unit RC 05 / Soft Spray units (for polishing fluid) + buffing unit SZ 30 (0.37 kW x 2)

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW PARTS, minimum width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 4 upper drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip extraction CNC control unit - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); Itodpsu Tp Slsfx Af Isb - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 3 upper drilling units (each with drilling heads of 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip extraction 2nd drilling machine connected to the CNC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC MACHINING CENTER Mobile table (workpiece), movable machining head - Vertical table (workpiece) Control system: TPA - Software: Albatros Safety enclosure for the machining head Workpiece feed with transport chain Rubber rollers for securing the workpiece during feed and machining Infeed table (with conveyor belt) - Outfeed table (with conveyor belt) With automatic workpiece return system to the operator (180°) Iedeihfiiopfx Af Istb Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: unlimited x 1300 x 80 (approx.) Separate electrical and control panel Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (quantity): 1 Independent vertical drilling spindles (quantity): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (quantity): 2 Independent horizontal drilling spindles (quantity): 36 (9+9 = 18 x 2) Motor power, drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) quantity: 1 Vertical main spindle motor power (kW): 7.5 (approx.) Automatic tool changer system, turret - Magazine positions: 10 tool stations

Sąlyga: labai geros būklės (naudotas), Dvipusė mašina, kurią galima pastatyti linijoje po pervaromą daugiašpylių gręžtuvą, skirtą automatiniam gręžimo ir kaiščių įstatymo ciklui. Iodow Ug A Hspfx Af Ijtb - Elektroninis programuotojas „CNI" NC 400 - Integruota valdymo ir elektros spinta - Didžiausias atstumas tarp horizontalių galvų: apie 3200 mm - Judama ir reguliuojama mašinos dešinė pusė (pagal plokščių plotį) - 2 vnt. motorizuotų transporterių juostų (po 0,25 AG kiekvienai, iš viso 2 varikliai) - 1+1 kaiščių talpyklos automatiškam jų padavimui į antgalius - 6+6 horizontalūs įstatymo antgaliai (klijų įpurškimo ir kaiščių įstatymo įrenginiai) - Aukšto slėgio klijų padavimo sistema - Bendra instaliuota galia: apie 5 kW.

Sąlyga: labai geros būklės (naudotas), PANEL SAW ANGLE SYSTEM Control: OSI Plus - Optiplanning Software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lift table (mm): 4500 x 2200 1st pusher saw with 5 grippers Rotating device (for panels) up to 90° Isdpfx Afsukhd Ao Ietb 1st panel saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd pusher saw with 10 grippers 2nd panel saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air cushion tables (mm 2200 x 1500) Automatic unloader (bridge) for cut panels: "RBO (BIESSE)" model Lifter with no. 6 stacking positions

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine. Itedpjt Ig A Ssfx Af Ijb

Sąlyga: labai geros būklės (naudotas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 5 upper vertical workpiece clamps - 2 endless screws for chip extraction CNC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed conveyors, feed rate up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – glue application and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each 2.3 HP and various drilling heads) - 3 upper vertical workpiece clamps - 2 endless screws for chip extraction Iodpfx Asvnq Txjf Ietb

Sąlyga: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support Iedpfsidqd Tox Af Ietb No. 4 upper vertical workpiece clamps Chip conveyor belt Digital position display (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports Itjdpfoidqf Rox Af Ijb No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edgeband Material (edges) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / SINITRA Software Feed Speed (variable) m/min: 10 – 40 (INVERTER CNC) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): - Safety milling cutter (pre-milling) AS 10 (5.8 kW) pneumatic - 2 x Chipper cutters DT 10 (5.8 + 5.8 kW) - Spraying device (for liquid non-stick agent) EDGE BANDING UNIT (for each side): - 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) - 2nd Gluing unit (pre-melter with hot air) Air Force System - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) - End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 – 25° - Pre-milling unit RS 10 (2 x 2 kW) - Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 – 25° - Multifunctional unit (radius milling and contour milling) AR 80 (0.65 kW x 2) 25 m/min ROTAX. Revolver 8+8 stations (max. 25 m/min) - Motors with automatic tool change (tools) - Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) - Flat scraper unit RC 20 + spraying units (for polishing fluid) - Buffing unit SZ 30 (0.37 kW x 2) Itedpfeu Rc Anjx Af Isb

Sąlyga: labai geros būklės (naudotas), Double-sided – First machine in a processing line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness with rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system: PC Base Windows / Software PC / SINTRA Feed speed (adjustable) m/min 10 – 40 (C.N. INVERTER) FORMAT PROCESSING (per side): Ijdpsu Rc Hyjfx Af Iotb Spray unit (for liquid release agent) No. 2 hoggers DT 10 (5.8 kW x 2) Empty space EDGEBANDING SECTION (per side): 1st gluing unit (Hot Melt + premelter) SP 30 (High Melt + Edge Control EC 40) 2nd gluing unit (premelter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 universal milling unit for grooving/rebating/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraper unit (CNC controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Sąlyga: labai geros būklės (naudotas), Electronic machine, CNC-controlled, PC control unit type NC 500 – Tooling System software No. 2 powered conveyor belts – feed speed (m/min) approx. 35–75 No. 2 horizontal drilling supports Drilling units per horizontal support (qty) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical support (qty) 2 x 1.8 HP No. 3 upper vertical drilling supports Spindles per upper drilling support (qty) 2 x 1.8 HP Itedshvi Duspfx Af Iob No. 5 upper vertical workpiece clamps No. 2 screw conveyors (endless) for chip extraction CNC controls movement (X-axis) of horizontal drilling supports CNC controls movement (Hv) of the 2 horizontal drilling supports CNC controls movement (X-axis) of vertical drilling supports CNC controls movement (axes Y1 and Y2) of the drilling units CNC controls movement (Y-axis) of the stops CNC controls movement (X-axis) of the workpiece clamps CNC controls movement (X-axis) of the conveyor belts The CNC controller manages all programming of automatic work cycles.

Sąlyga: labai geros būklės (naudotas), PC control unit type NC 400 (with software for managing work cycles) No. 2 through-feed motorised conveyor belts Max. working width (mm): 3200 - Min. working width (mm): approx. 205 No. 2 horizontal drilling supports No. 2 drilling units on each horizontal drilling support Spindles per horizontal drilling unit (No.): 11 No. 4 lower vertical drilling supports No. 2 drilling units on each lower vertical drilling support No. 2 upper vertical drilling supports Itodpoi D D Tfjfx Af Iob No. 2 spindles for each drilling unit of the upper drilling supports No. 2 upper vertical workpiece clamps No. 2 endless screws for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC controls the (X-axis) movement of the horizontal drilling supports. The CNC controls the (Y-axis) movement of the stops. OPTION: Front loading system (for narrow parts: Min 60mm - Max 260mm)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Skaitmeniniu būdu valdomi apdirbimo centrai WINLINE WINLINE – tai modernus ir inovatyvus apdirbimo centras, skirtas medinių langų ir durų komponentų gamybai. WINLINE atlieka visus darbo ciklus, įskaitant ruošinių pakrovimą/iškrovimą bei jų pozicionavimą kiekvienai reikalingai operacijai, viską valdant CNC valdikliui. Šis naujas integruotos automatikos lygis leidžia užtikrinti aukščiausią tikslumą. Šis įrenginys iš esmės yra „vieno žmogaus gamykla“: vienas operatorius valdo visą gamybos procesą kiekvienam komponentui be papildomų perėjimų – nuo suformuotų, iš visų pusių apdirbtų detalių iki visiškai paruoštų dalių, tinkamų surinkimui ir dažymui. Operatoriui taip pat lieka laiko atlikti papildomus lango konstrukcijos darbus: profiliavimą, dydžio pritaikymą, elementų surinkimą veržiančiame įrenginyje, furnitūros montavimą, stiklinimą ir kt. WINLINE gali gaminti bet kokio tipo lango komponentus, su įvairaus tipo sujungimais (neigiamas profilis ir kaiščiai, mechaninis tvirtinimas, atviri/uždari špantai ir pan.). Įrenginys užtikrina maksimalų našumą kiekvienu atveju. Fiksavimo mechanizmai suprojektuoti taip, kad detalės būtų stabiliai laikomos, pasiekiamas aukščiausias preciziškumas ir nuolat aukšta paviršiaus kokybė kiekvienoje operacijoje, pašalinami visi žymėjimai bei trinties dilimo pėdsakai, kurie tradicinėse sistemose atsiranda dėl trinties ir detalių slydimo apdirbimo metu. WINLINE darbo grupės pritaikytos intensyviam darbui užtikrinant didelį patikimumą. Įrenginys gali būti pilnai integruotas su bet kuria CAD/CAM sistema, leidžiant „nuo projekto tiesiai prie gamybos“. Bazinis įrenginio komplektas apima: Mobilios tiltinės konstrukcijos ir dviguba Y ašis su nepriklausomais vežimėliais Ruonių manipuliatorius: pakrovimas, iškrovimas ir spaustuvų keitimas Automatinė tepimo sistema Daugiasekcinė zona Automatinis plokščių atramų judėjimas Juostinis transporteriu drožlių ir nuopjovų šalinimui Itjdpfxswnx Ags Af Isb Skaitmeninis valdymas (CNC) Asmeninis kompiuteris su 3D vaizdo plokšte ir LCD ekranu Oro kondicionuojama elektros įranga Dokumentacija Priežiūros įrankiai Nuotolinis valdymo pultelis Industry 4.0 – integracija su gamybinėmis sistemomis

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Die Brema EKO 2.2 ist die neue, kompakte und vielseitige vertikale Bohrmaschine, die die Bearbeitung verschiedener Plattenformate und -stärken bei geringer Stellfläche ermöglicht. Sie ist die ideale Lösung für eine "Just-in-Time"-Produktion, auch bei komplexeren Fräsbearbeitungen. Höchste Maschinenindividualisierung entsprechend den Produktionsanforderungen Maximale Fertigungseffizienz durch Wegfall von Rüstzeiten Großes Spektrum bearbeitbarer Platten Brema EKO 2.2 – CNC-Bearbeitungszentrum für Platten Itsdpfx Afswnx Ivo Iob X-Bearbeitungsbereich: 3200 mm Y-Bearbeitungsbereich: 1250 mm Bearbeitbare Platten (Mindest- und Maximalmaße) Maß MIN (mm) MAX (mm) Länge (X) 200 3200 Höhe (Y) 35 1250 Stärke (Z) 8 60 Max. bearbeitbares Plattengewicht: 50 kg (*) Verhältnis Plattenhöhe (Y) / Länge (X) ≤ 0,75 bei Platten bis L = 320 mm (°°) Verhältnis Plattenhöhe (Y) / Länge (X) ≤ 1,5 bei Platten L > 320 mm Bei Minimalplatten, die nur mit einer Greifer-Spannung gehalten werden, sind alle Bearbeitungsarten möglich – ausgenommen jene im Greifereingriffsbereich. Bei Bearbeitung auf Greiferhöhe kann ein Kippen des Werkstücks erforderlich sein. Alle Operationen sind im Einzelfall in Bezug auf Plattenmaße (insbesondere Mindestwerte), Materialart, Beschichtung und Bearbeitungsanforderungen zu prüfen. Arbeitsbereich der Werkzeuge (Mindest- und Maximalmaße, bezogen auf Werkzeugachse) X-Achse Operation MIN (mm) MAX (mm) Bohren 0 3200 Fräsen (mit Elektromotor-Spindel) 0 3200 (^) Nutenfräsen (mit Sägeblatt in X) 0 3200 (^) Y-Achse Operation MIN (mm) MAX (mm) Bohren 0 1250 Fräsen (mit Elektromotor-Spindel) 0 1250 Rf Nutenfräsen (mit Sägeblatt in X) 25 1250 Z-Achse Operation MIN (mm) MAX (mm) Horizontale Bohrungen 0 35° Ru (^) Mit automatischer Greifer-Umpositionierung (°) Maximalmaß kann je nach Plattengröße und Greiferpositionierung reduziert sein.

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), I am selling a Biesse line consisting of: COMIL Insider dowel - milling - grooving - dowel insertion - glue application - accessories insertion - line. Itodpfxed Iv H Rs Af Ijb Year of manufacture: 1999-2001. It is possible to sell the machines separately. Vibration feeder and motorized conveyors included in the offer. For more photos and details, please send an inquiry.

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), I am selling a throughfeed drilling machine BIESSE TECHNO FDT, year of manufacture 2004. Working area: X: 215 - 32,000 mm Itodpfxji U Apmj Af Iob Y: max. 672 mm (horizontal spindle 24 units, 32 mm pitch) Z: Workpiece height: 9 - 65 mm Min. X distance between vertical heads: 96 mm Configuration: 4+4 motors from below 1 routing motor with pneumatic on/off stroke from below 1+1 side motors, 24 spindles / 32 mm pitch 0 motors from rear 4+4 motors from above 4 material pressure rollers from above Very good condition. Available immediately. Another BIESSE TECHNO FDT with different configuration available in a line. Price upon request.