Automatinė elektroninė gręžimo linija

BIESSE + RBO (BIESSE Group) Techno FDT CN + SDT CN + Tornado

Gamybos metai: 2011, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL Tilt Destacking Unit - SH/4t - 1.75x1.75x6.00m - 4t – minimum length 2.50 m, semi-automatic package separation. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions 1.75 x 1.75 x 6.00 m, max. stack load 4 t, shortest wood length 2.5 m. 2. HOWIAL Lamella Separator VE 1 for cross-cut saw. With pneumatically controlled fingers for material marked after defect detection, deposited on the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. 4. Gann DMT-8 Digital wood moisture measurement, control and registration system for the automatic detection and control of wood moisture using the electrical resistance method in a cycle-based process. System integrated in a large control cabinet, complete with inkjet printer. 5. HOWIAL Cross-Cut Saw AS-30 B Pneumatically controlled under-table cross-cut saw with 2 automatic feed units, automatic cross-cutting. Special photoelectric cell control for detection of fluorescent marking lines. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Feed speed max. approx. 60 m/min 6. HOWIAL Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/sec 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. cross transfer, equipment for the finger jointing automation. Driven by round belts, all rollers driven. Cross removal via chain conveyor. Ejector ± moisture, right side. Adjustable transport speed 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Infeed length from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger profile 15/15 Spindle speed approx. 6000 rpm Total connected electrical load approx. 62 kW Machine weight approx. 9 tons. OEST comb gluing system for PU adhesives Modern Telemechanique PLC control. Lodpfei Ezx Dex Aaujaa 9. HOWIAL Roller Conveyor with De-stacking Driven roller conveyor with automatic ejector and hydraulically operated de-stacking arms. Technical data: H: 920 mm L: approx. 12,000 mm 10. Safety Fencing including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385. Support distances freely adjustable, integrated measuring scale, automatic calculation of support distances in software. Fully automatic test sequence via mouse click on PC (not included). Alternatively, test sequence can be triggered from control panel. Connects to any standard PC or laptop (Win 2000/XP) using provided RS232 serial cable. Fully automatic data acquisition and test report generation in MS Excel with graphical presentation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISASSEMBLY

Būklė: naujas, Gamybos metai: 2024, Boring and Inserting Machines Rilesa Vlg 2200, new, March 2024 Lasdsgbpmhopfx Aauoa Make: Rilesa Model: Vlg 2200 Description: Condition: new Year: 2023 Startup Type: to be agreed Shipping Cost: Buyer Protection Delivery Terms: EXW (EX WORKS) – COLLECTION BY BUYER Category: Machine Tool Accessories in Poland Subcategory: Drill Bits Subcategory 2: Drilling Machines Description: DRILLING MACHINE WITH AN 8-SPINDLE MAGAZINE, TWO FRONT RIGHT AND LEFT, 3 TOP, AND 3 REAR. Year: 2024 The machine can be equipped with additional drilling heads; we are also a manufacturer of heads available in various spacings and with varying numbers of drilling spindles, tailored to individual requirements.

Būklė: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Lajdpfx Aasdfgg Ieuea E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Gamybos metai: 1988, būklė: reikia remonto (naudotas), Mechanizavimas įvedimui prieš obliavimo stakles, tinkama KVH/BSH ir pan. Rekomenduojama ruošiniams iki maždaug 13 m ilgio. Ideali KVH ir BSH linija prieš obliavimo stakles. Išilginis iškrovimas – gaminių atskyrimas. 4 vnt. šoniniu būdu reguliuojamų diskinio pjūklo atpjovimo įrenginių. Pjūvio matmenys: 180 x 220 mm, 150 x 300 mm. Užtenka vieno operatoriaus. Laodpsvbtpsfx Aauoa

Gamybos metai: 2000, būklė: geras (naudotas), Barberan Laminating Line For all inquiries, please contact: Lajdpfx Aaeilqvrouea 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum element length: approx. 600 mm Continuously adjustable speed from the brushing machine, maximum speed: 20 m/min. The line includes: - Tommassini automatic loader (not operational) - Top and bottom brushing machine - Pre-heating lamps for the top and bottom glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Steel calender line for pressing - Additionally, the line is equipped with a purchased corona treatment unit for the upper surface (functional) – allows for single-side laminating with PP films

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), Connected load: 4 kW, Weight: 1 t. Lasdpshlp Efsfx Aauoa

Būklė: geras (naudotas), Gamybos metai: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel dimensions (thickness 20mm): 2340 x 1240 mm Working chamber height: 60 mm Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (closing movement from bottom to top) Lasdpfotwba Sex Aauoa Press platen opening: 230 mm Side loading width: 1400 mm PVC roll unwinder Double loading table

Būklė: geras (naudotas), Gamybos metai: 1994, 2-sided planer, top and bottom Constant table height (consistent infeed height) Max. planing width: 600 mm Max. planing height: 280 mm Planer heads with strip knives Lasdjhuthyepfx Aauoa Immediately ready for operation

Būklė: paruoštas naudoti (naudotas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Lasdpfjm Habdsx Aauoa

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): Laodpfjgwbbqox Aauoa No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)