Plokštės grąžinimas

BIESSE PRS - EKO

Būklė: naudotas, mašinos/transporto priemonės numeris: 008374, Didžiausias plokštės plotis: 1000 mm Didžiausias plokštės ilgis: 2500 mm Lodpjyng Amsfx Aaujaa

Būklė: naudotas, Gamybos metai: 2015, NC 1000 Numerical Control, Biesse Works Advanced Software Working field in X-axis: 4300 mm - X-axis travel: 5365 mm Working field in Y-axis: 2205 mm - Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm - Z-axis travel: 385 mm FT-Nesting full-plane worktable Automatic loading system with side lifting table Automatic labelling unit for barcode printing Automatic printing and application system for adhesive labels No. 1 vertical electrospindle with pre-setting for 4 axes (C-vector axis), with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated into the drilling head on X-axis – diameter 120 mm Automatic tool change system with 8 positions – positioned on the machine operator head Automatic tool change system with 21 positions – positioned on the rear of the machine with chain Drilling head BH 40 L with independent spindles, arranged as follows: – No. 17 vertical in X-axis – No. 12 vertical in Y-axis – No. 6 horizontal in X-axis – No. 4 horizontal in Y-axis Lodpfswt Snyjx Aausaa Automatic unloading system with motorized conveyor belt Front protection and safety system with mats and limiting nets Automatic lubrication system Air conditioning for the control cabinet No. 2 vacuum pumps with 250 m³/h each

Būklė: naudotas, Gamybos metai: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with 90° transfer station Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space reserved for a sanding machine (optional) 3. VEN SPRAY PERFECT spray machine, length 5,510 mm 4. OIR flash-off dryer, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180-degree angle transfer with nozzle dryer 7. Supply air unit for angle transfer, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm Lodpfx Aaou Afu Rousaa 4 infrared emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge area, conveyor of the UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request

Gamybos metai: 2013, būklė: paruoštas naudoti (naudotas), Connected load: 4 kW, Weight: 1 t. Ljdpohlp Efefx Aausaa

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 300 mm, šlifavimo aukštis: 160 mm, aukščio reguliavimo tipas: elektrinis, šlifavimo juostos ilgis: 2 150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only show machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speed up to 18 m/s - Infeed and outfeed table extensions - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubber-coated (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (drilled) for blower connection - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air blast nozzle - CSD (magnetic pressure beam) Lsdpowcqr Ajfx Aauoaa The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Būklė: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: A1711012, Pos. 1 VEN CLEAN Smart Dust Extraction Unit Compressed air dust extraction system for cleaning workpieces to be painted, specifically for removing dust from profiled workpiece surfaces. Five rotating air-blast stars are installed, which remove dust from the surface. The loosened dust is extracted from both sides via extraction ducts. An external extraction system provided by the customer is required. Technical Data: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Overall width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization via nozzle bar (non-ATEX) with compressed air nozzles, Compressed air consumption: 840 Nl/min Pos. 2 VEN SPRAY Comfort Automatic Spraying Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of manufacture: 2017 - Length: 4,350 mm - Working height approx. 930 mm +/- 20 mm - Working width: 1,300 mm - Operator side: left - Price for overhauled machine - Current condition: machine not overhauled - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Feed speed continuously adjustable: approx. 2–6 m/min - With belt cleaning system with tungsten carbide scraper Complete pre-installation for retrofitting a second washer is provided. - Gun control, Touch Screen CNC7000 - 1 installed paint circuit (additional circuits optional) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A Ljdpfx Aasu U Ryyeuoaa - Power supply: 400 V / 50 Hz - Colour: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer you assembly and commissioning of the system, as well as training for your staff. Upon request, we also provide regular maintenance and servicing for the machine. For further information, simply contact us!

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Lasdpfxou R Szae Aausa Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: naujas, Typ: SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: frequenzgeregelt Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtanschlussleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querwalzenmotor: 1,5 kW × 1 Schraubwalzenmotor: 2,2 kW × 2 Vorschubmotor: 2,2 kW Ledodmi Niepfx Aaueaa Hubmotor (oben/unten): 0,37 kW × 4 Schenkelschwenkmotor: 0,37 kW × 2 Arbeitstisch-Hub: 0,55 kW Transportabmessungen (L×B×H): 3650×1850×2100 mm Gewicht: 4200 kg

Gamybos metai: 2024, būklė: naujas, Return System Laodpfow Nadmex Aauoa Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the KAM. The RTS Compact is delivered complete with a control cabinet and is ready for immediate operation after installation. Options: - "RTS Compact Conveyor Technology Extension" for easy rotation of parts during transversal edgebanding. - "RTS Compact Ergonomics Package": A lift table and air cushion table are utilized at the end of the return conveyor. This option enables ergonomic operation. - Compatible with edgebanding machines of all manufacturers - Single-operator edgebander handling possible - Maximum ergonomic design - Reduced personnel costs - Gentle material transport - Installation time approx. 0.5 days - Small parts rotation unit - Equipped with conveyor belt: length 4500 mm, width 800 mm - Single-lane roller rail - RTS Compact control system, optional control box Availability: short-term Location: Flörsheim

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm Ljdpfx Aov I Akveaujaa - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035