Beoris Dažų Purkštuvas pirkti naudotą (1 545)

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. Chsdpfjfz Nb Tex Anled It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, Gamybos metai: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Bar for hanging parts Cedpfx Ansfgnytoljhd * Convection (uniform temperature throughout the oven) * Safety locks for secure opening and closing * Maximum operating temperature: 230 °C. TQ0906 Powder Coating Booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3200 m³/h * Hermetically sealed lamp: 1 pc * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for dispatch. CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. have a WE certificate. We offer our own transport – prices are negotiated individually for each order. We issue VAT invoices. Short lead times! Option to order machines in various customised configurations and dimensions. Please do not hesitate to contact us.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Chsdpfxeflmdwe Anljd Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Codpsfzkrnsfx Anljhd Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, Touch to Delete Chodpfxjfzktzj Anlod ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Chsdefz A Ilepfx Anled Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk. Chedpsfz A Iwjfx Anlsd

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Codpfx Ansfz Dt Nslehd Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. Cjdpfx Aefz Dubonlshd All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, Gamybos metai: 2025, Powder Coating Oven The oven is designed for drying elements coated with water-based and solvent-based paints. Working dimensions (mm): 1500 (W) x 4000 (D) x 2000 (H) Technical Data: • Power consumption: 59 kW. Equipment: • Top-mounted conveyor, • Touch control panel, • True Fan Cooking (uniform temperature throughout the oven, accelerates workpiece heating), • Safety locks for secure opening and closing, • Timer module, • Thermoregulator (monitors and maintains the internal temperature at the required level), • The oven is equipped with rails for easy transport. • Maximum operating temperature: 230°C. CHOOSE BUMEX SP. Z O.O. Very high quality of machines available on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. brand products have a WE certificate. Codpfx Aog Ib Eponlshd We offer our own transport – prices are agreed individually for each offer. We issue invoices with VAT. Short lead times! Machines available in various personalized configurations and dimensions upon request! Do not hesitate to contact us.

Būklė: naujas, Gamybos metai: 2025, įvesties srovės tipas: trifazis, bendras svoris: 450 kg, bendras aukštis: 2 500 mm, bendras plotis: 4 200 mm, Įranga: apšvietimas, BUMEX SP. Z O.O. presents a powder coating booth. Working dimensions: 4,000 x 2,200 mm 5 x Filters Automatic filter cleaning with adjustable interval from 10–1,200 sec. Fan: 2 x 2.2 kW, 9,500 m³/h = 19,000 m³/h 2 x LED lamps Delivery time: 14–21 days Our booths are distinguished by their very high build quality, operational safety, and the customization of booth parameters to your requirements. We provide expert advice for selecting paint booths, dust extraction systems, exhaust systems, and industrial heat recovery solutions. CHOOSE BUMEX SP. Z O.O. Chedpfx Anohfwy Hslod - Very high quality of machines offered on the market - Professional consulting and service - Warranty - Warranty and post-warranty service - Complete technical documentation - 100% customer satisfaction All BUMEX SP. Z O.O. brand products have a WE certificate. We offer in-house transport—prices are individually agreed for each offer. We provide invoices with VAT indicated. For example: - Short lead times! - Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm Cedpfxezv Tdfj Anlehd - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: naudotas, Gamybos metai: 2009, Dažų dengimo įranga Gamintojas: Cefla Modelis: Easy 2000D Pagaminimo metai: 2009 Dažų dengimo linija, sudaryta iš: - Padavimo konvejeris su šviesos barjerais - Dulkių šalinimo šepetėlių įrenginys - Dažymo kabina su dviem automatiniais purškimo rankomis, kurių kiekviena turi po šešias purškimo pistoletus - Plieninė konvejerio juosta, skirta surinkti pertekliui dažams, kurie neprilimpa prie detalių - Automatinis pernešimo konvejeris į džiovinimo kambarį - Trijų kamerų džiovinimo kambarėlis dažytiems gaminiams - Išėjimo konvejeris iš džiovinimo kameros Įskaičiuota: - Šilumos atgavimo įrenginys (rekuperatorius) - Oro nusiurbimo sistema lakiems junginiams Cedpfxezuzt Ej Anljhd - Dulkių nusiurbimo sistema padavimo stalui Pastaba: Techninės specifikacijos ir aprašymai yra to meto užsakymo patvirtinimo kopijos. Informacija pateikiama tik informaciniais tikslais ir nėra įpareigojanti.

Būklė: naudotas, Dažymo įrenginys Promac, modelis S.3P.3L, susideda iš dažų pompos, 3 dažymo pistoletų, 3 UV lempų džiovinimui ir transportavimo juostos 6200 x 10 mm, valdymo skydelio, laikmačių ir „rankinis/automatinis“ valdymo pavarų. Chsdpfx Anoy S Ac Eoled

Būklė: naudotas, Gamybos metai: 2001, UV lempos SUPERFICI Tipas: TU166/35-3UV55 Darbinis plotis: 1300 mm 3 UV spinduliuotuvai po 120 W/cm Vamzdinis transporteris su greičio reguliavimu 4–16 m/min Išoriniai oro filtrai Lempos matmenys: 250x360x160 cm Csdpfx Ajzg Ht Uonljhd Valdymo spintos matmenys: 80x200x210 cm

Būklė: geras (naudotas), Dažnio keitiklis, dažnio reguliatorius, variklio keitiklis, valdiklis, kintamos greičio pavara, keitiklis, invertorius. – Gamintojas: Telemecanique, dažnio keitiklis „Variable Speed Drive Altivar 16“ – Tipas: ATV16U29M2 – Galia: 1,5 kW Chodpfx Anozkr Hnoled – Įėjimas: 208/240 V – 50/60 Hz – Išėjimas: 3 fazės: 208/230 V – Dažnis: 0,1–200 Hz – Kiekis: 2 keitikliai – Kaina: už vienetą – Matmenys: 210/180/H145 mm – Svoris: 3,0 kg

Būklė: geras (naudotas), Dažnio keitiklis, dažnio reguliatorius, pavaros keitiklis, valdiklis, kintamos greičio pavara, keitiklis, inverteris – Gamintojas: Telemecanique, kintamos greičio pavara Altivar 16 su skaitmeniniu klaviatūros bloku / ekranu. – Tipas: ATV16U29M2 – Galia: 1,5 kW Chedpfx Anjzkr Sdolod – Įėjimas: 208/240 V – 50/60 Hz – Išėjimas: 3 fazės: 208/230 V – Dažnis: 0,1–200 Hz – Ekranas: tipiniai matmenys: 210/180/H145 mm – Svoris: 3,1 kg

Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Chjdjyg H Erspfx Anled Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Būklė: naujas, Gamybos metai: 2020, 🏭 MILTELIŲ DANGOS KABINA KPO-3 Automatinis filtro valymas su reguliuojamu impulso laiku, taip pat rankinis režimas. 🧼⏱️🖲️ 100% poliesterio filtrai – plaunami, atsparūs vandeniui, ilgaamžiai. 🧵💧♻️ Chedsflk Akopfx Anlod ROMER JET™ filtro valymas – patentuotas didelės spartos oro impulsas užtikrina efektyvų valymą. 💥💨🏅 Žemo triukšmo aliumininiai ventiliatoriai (74–79 dB) – saugesnis, apsaugotas nuo kibirkščių veikimas su mažomis energijos sąnaudomis. 🔇⚡🛡️ Reguliuojamas oro srauto deflektorius – antistatinė plokštė saugo filtrus ir pagerina ištraukimą. 🌬️🛡️📈 Sandarus filtrų tvirtinimas – tarpiklis ir spaustukas užtikrina sandarumą ir lengvą aptarnavimą. 🔩🧷✅ Jutiklinis valdymo ekranas – auto (laiko), auto (užsikimšimo jutikliu), rankinis + filtro keitimo perspėjimai. 📲🔁⚠️ Papildomas miltelių konteineris – atliekų surinkimui arba fluidizuotas bakas su tiesioginiu aplikatoriaus tiekimu. 🧺💨🎯 Viršutinis trauktuvas – perkelia sijas per kabiną, sumažina rankinį darbą. 🏗️➡️💪 Integruotas sijojimo įrenginys (su konteineriu) – švarūs atgauti milteliai pakartotiniam naudojimui, EX zonos vibrovariklis. 🧪♻️⚙️ Sprogimui atspari konstrukcija – komponentai parinkti taip, kad būtų išvengta sprogstamųjų mišinių susidarymo. 🛡️💥✅

Gamybos metai: 2025, būklė: naujas, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 Csdpfx Anofzb Rcelehd 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Būklė: naujas, Gamybos metai: 2025, Na zdjęciach przedstawiono piece do utwardzania, których cena może się różnić w zależności od rozmiaru, konfiguracji oraz opcji dodatkowych. 💡📏⚙️ W ROMER produkujemy zarówno modele standardowe, jak i w pełni indywidualnie dostosowane rozwiązania pod konkretne wymagania procesu. 🏭✅ Podaj nam wymiary elementu, wydajność linii, profil utwardzania oraz dostępną przestrzeń – a my zaproponujemy najlepszy układ i opcje realnie poprawiające wydajność pracy na co dzień. 🔥🎯 🧠📡 Sterowanie i monitoring Aktualne sterowanie procesem: temperatura, czas, przepływ powietrza i tryby pracy – z alarmami oraz zapisanymi recepturami dla powtarzalnych cykli. 🔁✅ 🔥🧩 Moduł grzewczy Szybki nagrzew i stabilna temperatura dzięki wydajnym elementom grzejnym i efektywnemu transferowi energii. ⚡🌡️ 🌀💨 Cyrkulacja powietrza Jednolity przepływ powietrza zmniejsza różnice temperatur i zapewnia powtarzalną jakość powłoki. 🎯✅ 🧱❄️ Izolacja i konstrukcja Przemyślana budowa komory minimalizuje straty ciepła – szybciej osiągasz zadaną temperaturę i zużywasz mniej energii. ♻️📉 🛡️⚠️ Bezpieczeństwo i certyfikacja Czujniki, blokady i logika zabezpieczeń zwiększają bezpieczeństwo i niezawodność działania. 🔒👷 ⚡💰 Wysoka wydajność Optymalny transfer ciepła i ograniczone straty to realne oszczędności eksploatacyjne. 📉🔥 Codpfx Ajfzccnsnlehd ⏰🤖 Automatyczny start Programowalny harmonogram – automatyczne nagrzewanie przed zmianą usprawnia rozruch produkcji. ⏱️✅ 🚪🔒 Samozatrzaskujące się drzwi + inteligentny komin Zapobiega przypadkowemu otwarciu, komin uruchamia się tylko w razie potrzeby – bezpieczna obsługa. 🧯✅ 🌿🔋 ECO mode Tryb oszczędny podczas bezczynności – ograniczenie zużycia paliwa nawet o 20% (w zależności od procesu). 🌱📉 👀💡 Podgląd i oświetlenie Możliwość kontroli bez otwierania drzwi – mniejsze spadki temperatury i łatwiejszy nadzór. ✨👁️ 🛤️🔥 Szyny prowadzące + automatyczny kapturek Osłona termiczna działa tylko podczas załadunku minimalizując straty, automatyczny wjazd szyn poprawia ergonomię i szybkość pracy. 🙌⚙️ 🎛️🌡️ WIELOSTREFOWE GRZANIE Oddzielne sterowanie strefami dla równomiernego utwardzania detali o różnych wymiarach i masie. 🧩✅ 🧠♨️ System MTS Elementy grzewcze montowane bez mostków cieplnych – wyższa efektywność i szybsze osiąganie żądanej temperatury. ⚡⏱️ 2-w-1 🧱↔️🧱 Komora dzielona Ruchoma przegroda tworząca dwie niezależne strefy – suszenie i utwardzanie w jednym piecu dla maksymalnej elastyczności. 🚀🔁 🎚️🌀 VFD wentylacja Płynna regulacja obrotów wentylatora w zależności od warunków w komorze – lepsza kontrola i niższe zużycie energii elektrycznej. ⚙️💡

Gamybos metai: 2020, būklė: naujas, Transport systems Chsdpfx Aefz I Edjnljd Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Cjdpfx Ansfz I Ehelshd The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Būklė: naujas, Gamybos metai: 2025, Powder Coating Oven Working Dimensions (mm): 1500 (W) x 2500 (D) x 1800 (H) Technical Data: • Power consumption: 36 kW. Equipment: Codpfsfgnyqox Anljhd • NIKO rail system • Convection (uniform temperature throughout the oven) • Locks for secure opening and closing • Maximum operating temperature: 230°C Equipment: • Internal cart • External cart • Genuine blower convection (uniform oven temperature) • Locks for safe opening and closing • Maximum operating temperature: 230°C CHOOSE BUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Warranty. In-warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. brand products have a WE certificate. We offer in-house transport – pricing is quoted individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions! Please do not hesitate to contact us.

Būklė: naudotas, Frequency inverter, frequency converter, drive inverter, controller, variable speed drive Codsfgpdgopfx Anljhd -LTi REENERGY: Controller E230 G360/1.2 BWrg-CFpux -Power: 1.2 A -Input: 230 V AC 4.5 A -Output: 360 V DC 1.2 A -Price: per unit -Quantity: 3 units -Dimensions: 300/150/H110 mm -Weight: 3.7 kg/unit