Baseino Dalies pirkti naudotą (12 079)

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, A workshop parts washer is a versatile tool that should be present in every service center, garage, or workshop. This indispensable device enables fast and cost-effective removal of contaminants. A significant advantage is its ability to be used indoors. A cabinet parts washer guarantees effective removal of all types of contamination, from oils to hard-to-reach deposits, ensuring both the safety and long-term performance of components. The applied technology not only provides cleanliness but also protects against corrosion. Please note that cleaning results will depend on the detergents used. The parts washer is designed to utilize up to 60 liters of cleaning fluid, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered during operation. The pump operates with a flow rate of 10 to 12 liters per minute, allowing thorough cleaning of surfaces, including those with fine cracks, using a powerful stream. The liquid is drawn by the pump from the bottom in a closed-circuit system and delivered under pressure through a flexible hose. The workshop washer is equipped with 4 legs, ensuring stable operation and optimized working height. The lid locks automatically when opened. The device also has a worktop below the basin level, which can be used to store washing accessories or cleaned parts to let them dry. Kjdpfsvugvvex Af Ijdg The device requires self-assembly. Technical data: Tub capacity: 80L Maximum pump capacity: 10-12 l/min Power supply: 230 V Dimensions: 775 x 540 x 915 mm Internal overall dimensions: 710 x 480 x 260 mm Shelf under the basin: 700 x 420 mm Power supply: 230V Weight: 23 kg The price does not apply to machines purchased in Poland.

Sąlyga: naujas, Gamybos metai: 2025, Properties and Applications - The body and movable jaw are made of high-quality cast iron Kodpfovxgp Dsx Af Ijdg - Replaceable, serrated jaw inserts, induction-hardened and ground - The use of a thrust bearing increases the efficiency of the clamping mechanism - Designed for clamping long workpieces using the full length of the machine table - Equipment: handle, positioning keys - Bolt spacing range: 135 - 180 mm, slot width: 18 mm.

Sąlyga: naujas, Gamybos metai: 2025, Properties and application The body and movable jaw are made of high-quality cast iron Replaceable, serrated jaw inserts, induction hardened and ground Kdsdpfx Aovxgq Uef Ieg The use of a thrust bearing increases the efficiency of the clamping mechanism Designed for clamping long workpieces using the full length of the machine table Equipment included: handle, positioning keys

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Staklės visiškai beržo matmenų ruošinių gamybai: 1) Leadermac LMC-523SP 2) WoodEye 5, W5-CC-4444 3) Paul 11KE 4) SCM Group Celaschi Progress 5) Weinig AG Unimat 23 EL Visi transporteriai ir ištraukimo vamzdžiai įskaičiuoti. Kdodpfx Ajttmm Rsf Ijg

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Spare parts for Fritz Heckert milling machines F315, F400 – even for the oldest models. We offer a complete range of spare parts for milling machines – both old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. In our inventory you will find: milling heads and all associated gearboxes, dividing heads, steady rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross-feed screws, nuts, oil pumps, coolant pumps, spindles, quills, hydraulic distributors/valves, and more. Kdodjvtnfpopfx Af Ijg We can supply all original parts for Heckert milling machines directly from stock, ready for immediate dispatch. All parts are new, manufactured to German quality standards, and meet the highest technical requirements.

Gamybos metai: 2014, Sąlyga: geras (naudotas), Spare parts Everything available, both as complete packages and as individual items Kdsdpfjifpyxsx Af Ieg

Sąlyga: geras (naudotas), Gamybos metai: 1998, Plastikinės dalys, pagaminimo metai apie 1998. Kdjdpsx Hkq Tofx Af Ijg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Plastikinės dalys 1x vnt Kedpfxjxrtrbo Af Ijdg

Gamybos metai: 2005, Sąlyga: labai geros būklės (naudotas), Atsarginės dalys Kedexuvihjpfx Af Iedg

Gamybos metai: 2001, Sąlyga: geras (naudotas), Atsarginės dalys frezavimo ir tekinimo staklėms, pagaminimo metai apie 2001, iš viso 53 vnt. Kdodpfxsxzfaij Af Iog

Gamybos metai: 2002, Sąlyga: naudotas, Atsarginės dalys frezavimo ir tekinimo staklėms Pagaminimo metai apie 2002. Ksdpfsxzfdzex Af Isdg

Sąlyga: naudotas, Technical details: Faceplate diameter: 785 mm Rotational speed: 4.5 - 180 rpm (faceplate) Drilling spindle speed: 4.5 - 900 rpm Tool holder: SK50 Kdedpfx Asu Nk Ehof Ieg Machine weight approx.: 3.7 t Space requirement approx.: 3.6 x 1.3 x 1.6 m Spare part for boring mill WMW BFT 130 - with spindle head (incomplete) as shown in the picture - Diameter for flange turning: 0-1400 mm - Diameter for drilling work: max. 800 mm - Diameter for facing work: 0-1400 mm - Drilling spindle diameter: 130 mm - Drilling depth: 1000 mm

Sąlyga: naudotas, Gamybos metai: 2002, Technical details: Rated power: 1670 kVA Rated power: 1500 kW Voltage: 400 V / 50 Hz Operating hours: 800 h This UPS system is ideally suited for uninterrupted operation under demanding environmental conditions, as often encountered in industrial applications. Suitable for stabilising, among other things, power supply systems. The UPS unit consists of the Powerbridge (a flywheel with an attached generator) and a Uniblock (electromotor/generator unit). Kedpfx Asu Nzwujf Ijdg The Uniblock supplies power to the customer modules in the absence of any mains fault. The Powerbridge serves as an energy storage device. In the event of a mains failure, the Powerbridge temporarily takes over the power supply (at full load, the supply is maintained for 39 seconds). Energy storage type PB60+ with a bridging time of 39 sec. A diesel engine is coupled via a freewheel clutch. This means that as soon as the engine reaches the speed of the Uniblock, it accelerates the generator to synchronous speed and thus takes over the power supply. (At the same time, the Powerbridge is recharged)

Sąlyga: naudotas, Grease nipple approx. 1.5 t available Kdedoglmt Eopfx Af Isg

Sąlyga: naudotas, approx. 1.7 t available Kdjdpoglmt Nsfx Af Isg

Sąlyga: naudotas, Techninė informacija: Kjdpfx Afsu N E Evs Ijdg Medžiagos storis: 1,0 mm Medžiagos plotis: 17,0 mm Vidinis skersmuo: 30,0 mm Išorinis skersmuo: 78,0 mm Atsarginė dalis stalo gręžimo staklėms BT 2 Plokščioji spyruoklė – grąžinamoji spyruoklė – spiralė spyruoklė Atitikties deklaracija pagal ISO/IEC 17050-1 Prieinama patikros sertifikatas 3.1 pagal DIN EN 10204

Sąlyga: naudotas, Technical details: Weight: Price is calculated per kg Various crane runways Lot 1: Columns for crane runway 6 pieces double-T beams, L: 4.66 metres x W: 22 cm x H: 54.5 cm 1 piece double-T beam, L: 4.71 metres x W: 21.5 cm x H: 55 cm Lot 2: Crane runway 4 pieces I-beams, L: 7.16 metres x W: 22 cm x H: 54.5 cm 2 pieces I-beams, L: 6.25 metres x W: 22 cm x H: 54.5 cm 2 pieces of end I-beams with stopper, L: 6.93 metres x W: 22 cm x H: 54.5 cm Lot 3: Crane runway 4 pieces I-beams, L: 5.90 metres x W: 21.5 cm x H: 55 cm 2 pieces I-beams, L: 4.10 metres x W: 21.5 cm x H: 55 cm 2 pieces end beams with stopper, L: 6.05 metres x W: 21.5 cm x H: 55 cm Lot 5: 10 pieces support beams, length 6,400 mm, double-T profile 180 x 180 mm, weight 2,420 kg Kdsdpfeu Nvkvex Af Ijg Subject to prior sale. If still available. Please specify exactly which beams you are interested in when making your enquiry.

Sąlyga: naudotas, Technical details: Mounting diameter: 310 mm Weight: 216 kg Dimensions (L x W x H): 0.5 x 0.2 x 0.9 m Connecting rod for mechanical press PEE 250 Trapezoidal thread Ø 146 x 14 mm Kdodpfx Aju Nurxef Isg

Sąlyga: naudotas, Nauja: Ne Paskirtis: Statybos Dėl daugiau informacijos kreipkitės į ATS Norway. Kjdpfx Afox A R Unj Ijdg Prašome užklausos metu nurodyti nuorodos numerį: 18477 Aprašymas: Gręžimo įrenginys Atlas ROC 712 H-01 parduodamas kaip keičiamas objektas, nes yra nestabilios būklės. Savininko teigimu, įrenginys buvo naudotas prieš 2 metus. Variklio darbo valandos: 18 902 val., keltuvo darbo valandos: 9 771 val. Gręžimo įrenginys parduodamas be kompresoriaus. Paruoštas pristatymui. Svoris: 10 000 kg Modelis: ROC 712 H-01 gręžimo įrenginys be kompresoriaus

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Spray Cleaning System – Parts Washing Machine with Hinged Door Single-tank design (Washing), tank capacity 320 liters Basket: LxW 1,100 x 1,100 mm Usable height: 800 mm Max. loading weight: 700 kg Washing pump pressure: 4.3 bar, pump output: 5.5 kW Heating (electric) 20 kW; heatable up to 80°C Control system: Siemens Logo Includes: Kdjdpfx Ajd Rkmxof Ijg - Steam extraction and condensate return system - Automatic water refill - Automatic chemical dosing (adjustable 0.8–5.5%) - Full system insulation - Entire system constructed from stainless steel 1.4301 - Basket rim (removable on one side) - 7-day timer for electric heating - Electric spray pipe, h = 450 mm - Preparation for oil separator (electrical & mechanical) provided New machine; currently being used for washing trials in our technology center.

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning System, Spray Cleaning Machine Type L90 Automatically operating hot water parts washer with automatic basket drive via geared motor, stainless steel wash pump (make: Lowara), circulating 3-sided spray system (from below, side, and above) with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (room temp. – 90°C) Machine dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Washing cycle timer adjustable via Omron timer (minutes and hours) Complete cleaning system (interior and exterior cladding) made from stainless steel 1.4301 Water circulation system and loading basket made from stainless steel 1.4301 Full system insulation (tank and cabin) made from stainless steel 1.4301 Mechanical lid locking Kdodpjhgh I Sofx Af Ijg Bath cover with fine filter (2,000 micron) Suction filter for pump protection Operating hours counter Steam extraction including condensate return Prepared for later installation of an oil separator The parts washer is as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Effective height: 500 mm - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) Kdsdpfx Afofzblqe Isg System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter for pump protection Delivery: ex works, FCA

Gamybos metai: 2025, Sąlyga: naujas, Parts Cleaning Machine, Spray Cleaning System Type L901FP Kdodpfx Ajfl Ufzjf Iog Fully automatic hot-water parts washer with basket drive powered by geared motor. The housing of the unit is made of stainless steel 1.4301; all piping and rotating basket are zinc-plated steel. Special nozzle system equipped with stainless steel flat spray nozzles. Washing pump made of stainless steel (manufacturer: Xylem/Lowara). Level control for dry-running protection. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 190 liters - Heating: electrically adjustable (ambient temp. to 60°C) System dimensions (LxWxH): 1,300 x 1,350 x 1,990 mm Suction filter for pump protection Delivery: ex works, FCA

Sąlyga: geras (naudotas), Jaw width, approx.: 200 mm Clamping range, approx.: 365 mm Dimensions LxWxH, approx.: 630 x 300 x 165 mm Ksdefbaq Hepfx Af Iedg Weight, approx.: 75 kg Ref. 0320276

Sąlyga: labai geros būklės (naudotas), Machine vice, mechanical. Jaw width, approx.: 200 mm Kdodped Ttd Rofx Af Isg Clamping range, approx.: 425 mm Dimensions (LxWxH), approx.: 630 x 300 x 165 mm Weight, approx.: 75 kg Item no. 0320275