Alko Jet Stream pirkti naudotą (67)

Būklė: naujas, Gamybos metai: 2025, AL-KO POWER UNIT® 120 M with Automatic Machine Detection Clean Air Extraction System with H3 Approval Inlet Nozzle: 120 mm Motor Rated Power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum Airflow: 1,140 m³/h Nominal Airflow: 814 m³/h Gedpfx Ajhkztwsf Doua Negative Pressure: 2,180 Pa Filter Surface Area: 5.1 m² Chip Collection Volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Ex-display unit – new Available at a special price Technical Data 300-P Inlet diameter: 300 mm Motor rated power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. air flow: 6,000 m³/h Guodpfjcdrzdox Af Dsa Rated air flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter surface area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Location: Ex-stock Bitburg Subject to prior sale

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Al-Ko clean air dust extractor Ex-demonstration unit Offered at a special price Technical data Power Unit 250 P Inlet diameter: 250 mm Motor rated power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Maximum air flow rate: 4900 m³/h Gusdpfx Aecdr Ensf Doa Nominal air flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L x W x H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: 54634 Bitburg warehouse Subject to prior sale

Būklė: naujas, Gamybos metai: 2025, A thoroughly reliable, mobile family: You can obtain AL-KO POWER UNIT® extraction systems for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes, or an ideal supplement to existing stationary systems. Your advantages: • IE3 motor as standard • Approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional type-tested rotary valve (FSA) • Tested backpressure flap • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h • Negative pressure at rated flow: 2,543 Pa • Suction connection: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 L Guedjhkzt Nopfx Af Dsa • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: In stock at 54634 Bitburg - Immediately available – as the unit is in stock Subject to prior sale

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal “Wood Dust Tested according to BGI 739-1”. YOUR BENEFITS Guedpfx Aedqzhbsf Doa - Accessible from 4 sides - Load capacity up to 150 kg - Manual, tool-free height adjustment with scale - Offset longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle: 140 / 160 mm Required extraction capacity: 1,500 m³/h Negative pressure at nozzle at 22 m/s: - 1,000 Pa at DN140 mm - 700 Pa at DN160 mm Adjustable working height: 735-1,015 mm Work surface (W x L): 946 x 1,500 mm Dimensions (W x L): 1,000 x 1,600 mm Weight: approx. 73 kg

Būklė: naujas, Gamybos metai: 2025, Al-Ko Clean Air Dust Extractor Year: 2024 Exhibition unit – Immediate availability Exceptional special price Technical Data Power Unit 250 P Gujdpfecdy I Rox Af Dea Inlet diameter: 250 mm Motor nominal power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. air flow rate: 4900 m³/h Nominal air flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Būklė: naujas, Gamybos metai: 2024, Description High-quality housing made of galvanized steel Powerful, economical motors Standard selectable inlet port at the top or bottom Uniform filter bags for all variants Discharge into chip bins The modular models of the AL-KO AAS series are available in optimally matched performance categories, featuring energy-saving and quiet motors that drive the raw air-side fan, thereby creating particularly effective positive-pressure filtration. Durable quality components and a complete metal housing made of galvanized sheet steel offer you investment security, as do the wide range of retrofit options. The exceptionally attractive price and short installation times also contribute to making the AL-KO AAS the right choice with certainty. Technical Data AL-KO AAS 3013 Inlet port: 200 mm Nominal capacity: 2,500 m³/h Maximum airflow: 3,300 m³/h Maximum pressure: 2,700 Pa Filter area: 3 x 2.2 m² Chip collection volume: 3 x 175 liters Motor power: 3.0 kW / 400 V Dimensions (L x W x H): 2,486 x 578 x 2,115 mm Weight: 139 kg Guedpfofc A Urex Af Dja

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Technical data POWER UNIT 200 P • Inlet diameter: 200 mm • Rated motor power: 2.9 kW; 400 V/50 Hz • Max. air flow rate: 3010 m³/h • Nominal air flow rate: 2262 m³/h • Negative pressure: 2174 Pa • Filter area: 13.7 m² Guedpsbpg Ncofx Af Doa • Filter cleaning: compressed air • 2 collection containers (roll containers): each 241 litres • Dimensions (L x W x H): 2322 x 830 x 2050 mm • Weight: 320 kg • Version / control side selectable right / left Location: Ex stock Bitburg Top price for the display unit

Būklė: naujas, Gamybos metai: 2025, AL-KO POWER UNIT® 250 P-BP Inlet diameter: 250 mm Gjdocdr E Aopfx Af Doua Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum air flow rate: 4,900 m³/h Nominal air flow rate: 3,534 m³/h Vacuum: 2,451 Pa Filter surface area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Arriving at warehouse 54634 Bitburg Subject to prior sale

Būklė: naujas, Gamybos metai: 2025, A completely reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum airflows between 790 and 10,000 m³/h. These energy-efficient AL-KO POWER UNIT® models are the perfect solution for small to medium extraction volumes or as an ideal supplement to existing stationary systems. Your advantages: • IE3 motor as standard • approx. 73 m² filter area • Pre-separator included as standard • Certified to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ (wood dust) is reliably maintained • Optional type-tested rotary valve (FSA) available • Certified backflow flap • Integrated automatic extinguishing system Technical data: • Rated motor power: 15.0 kW / 3-phase • Voltage: 400 V / 50 Hz • Maximum airflow: up to 10,000 m³/h at the fan • Nominal airflow: 7,127 m³/h • Negative pressure at Vnenn: 3,000 Pa • Inlet diameter: 355 mm • Sound level: 71 dB(A) at full load (per DIN EN ISO 11201) Godpfxofzbqyj Af Djua • Chip container capacity (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,351 • Net weight without packaging: 1,040 kg

Būklė: naujas, Įranga: dulkių šalinimas, For all industrial processes where dust and coarse particles are released, the AL-KO CLEAN UNIT D series clean air dedusters are the right choice. Thanks to their powerful fans and highly efficient filter cartridges, these mobile extraction systems ensure clean air not only in metalworking but also in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via collection hoods and transported through a suction line to the connection port of the AL-KO CLEAN UNIT D. In a generously sized pre-separation chamber, coarse particles are separated out. The subsequently arranged filter cartridges of dust class "M" then filter out the remaining fine dust. The differential-pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during suction operation. Venturi nozzles on the filter cartridges increase the cleaning effect, ensuring consistent suction power and a long filter service life. The separated dust is collected in an easily mobile container fitted with a collection bag for low-dust disposal. The purified air is then returned to the room via the top of the unit. Gusdpfowwkrfsx Af Dsa Applications: - Direct extraction of dust and chips - Suitable for single or multi-point extraction - Can be connected to machines, extraction tables, booths, and ductwork - For metalworking, plastics processing, and many other industries - For use during grinding, polishing, filling processes, and more Advantages: - High suction capacity thanks to an efficient fan and cleanable filters with long service life - Suitable for a wide range of applications - Extremely quiet due to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play

Būklė: naujas, The high-performance, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting fumes during manual welding, at automated welding stations, or welding robots. Functionality: The welding fumes generated at the welding site are captured, for example, via extraction arms and hoods, and conveyed through a duct to the AL-KO CLEAN UNIT F's suction port. In a generously sized pre-separation chamber, coarse particles are pre-filtered. The following filter cartridges of dust class “M” capture the remaining fine dust. During extraction operation, the differential pressure-controlled filter cleaning system removes adhered particles from the filter cartridges. Venturi nozzles on the filter cartridges enhance cleaning efficiency, ensuring consistent suction power and long filter service life. A volumetric flow monitor continuously checks the required suction performance and alerts if the target value falls below specification. The cleaned dust is collected in an easily maneuverable container. The purified air is returned to the room via the unit's top section. Applications: - Suitable for all welding tasks with unalloyed or low-alloy steels - Can be used for extraction at individual welding stations or on duct systems with multiple extraction points - Suitable for extraction at fixed-position hoods and welding tables Advantages: Gsdpfswwkvqsx Af Djua - Consistently high suction performance thanks to an efficient fan and durable, cleanable filters - Extremely quiet due to highly effective sound insulation - Suitable for individual welding stations and for connection to ductwork systems - IE3 motors for high energy efficiency - Broad performance range - Suitable accessories for various welding applications

Būklė: naujas, AL-KO CLEAN VAC central vacuum systems are the ideal solution for direct extraction on hand-guided processing machines, as well as for use as central cleaning vacuums in entire workshop or production areas. Wherever strong suction power is required, or long ducting distances need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Gsdpfswwt Aasx Af Deua Applications: - Dust extraction for hand-operated processing machines, e.g. in joineries, grinding shops, or training workshops - Cleaning vacuuming of floors and machinery in workshops, production areas, or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Plug & Play at its best: fully pre-assembled at the factory. Fully operational once power and compressed air are connected - 100% air recirculation thanks to M-class dust filters (residual dust < 0.1 mg/m³) and optional HEPA filter stage H13 / H14 - Attractive appearance and also weatherproof - Low noise operation due to sound-insulated and powder-coated housing - Simple handling: set up, connect, and immediately ready for use at the customer’s site

Būklė: naujas, Gamybos metai: 2025, The POWER UNIT 160 P is a tested clean air dust extractor with a self-supporting sheet steel design, powder-coated in colour. The unit complies with the latest regulations and carries the BG–GS test mark according to GS-HO-07, certified with a note for residual dust concentration test mark H3. This means that, for dust extractors of this size, direct installation in the working area is permitted without the need for additional fire or explosion protection measures. The POWER UNIT 160 P is suitable both for individual extraction as well as for supplementing a central extraction system. This dust extractor is designed for decentralized extraction in a wide range of applications, handling materials such as wood and wood composites, paper, plastics, metal, stones, and more. Its compact dimensions allow for installation even in cramped workshops. Your benefits: • Compact design • Highest reliability • High suction capacity • Integrated pre-separator • 100% air recirculation, residual dust content < 0.1 mg/m³ • Low noise emission • Extended filter lifetime • Easy emptying • Delivered ready to plug in • Optional with rotary valve or briquetting press Technical data: • Inlet nozzle: 160 mm • Rated motor power: 2.2 kW; 4.6 A, 3 phase; 400 V/50 Hz • Max. air volume flow: 2,000 m³/h • Air volume at nozzle at 20/22 m/s: 1,448/1,592 m³/h • Negative pressure at nozzle at 20/22 m/s: 2,503/2,399 Pa (loaded and cleaned) • Filter surface: 9.1 m² (23 x Ø 125 mm, 1,000 mm long) • Filter cleaning: compressed air cleaning, AL-KO OPTI-JET® • Filter material: Cat. M, el, white, washable • Filter load: 159 m³/(m² x h) • Max. sound pressure level: 71 dB(A) (free-field measurement according to DIN EN 11201, measured at 1 m distance) Godpfx Aofydzbjf Doua • Chip collection volume: approx. 165 (241) litres • Electrical connections: 5 m connection cable with CEE plug • 5-pin, 16 A with phase inverter • Compressed air supply: ½” standard coupling with maintenance unit (compressed air consumption: 108 Nl/min at 6 bar) • Airflow monitoring: differential pressure switch with warning lamp on control cabinet • Dimensions (L x W x H): 1,718 x 830 x 2,050 mm • Chassis: 4 plastic castors 125 mm, two swivelling, one with locking device • Weight: approx. 340 kg • Configuration / service side: choice of right or left • Paint finish: RAL 7001 (silver grey) and RAL 7035 (light grey)

Būklė: naujas, The devices of the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required simultaneously. Typical applications include chip extraction at saws in window manufacturing or direct extraction of milling chips at multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa ensures that chips and dust generated during processing are quickly and safely extracted directly at their source. This guarantees a smooth manufacturing process and flawless product quality. Bag filters ensure a high separation efficiency for both coarse particles and fine dust. In addition, the system allows the connection of a pipework system to link several processing machines to the dust extractor. The AL-KO POWER VAC units come equipped with the proven AL-KO OPTI JET filter cleaning system and, as standard, a control unit with integrated frequency converter. This enables the extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning extraction of floors, machines, and workstations in industrial and craft environments - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Suction of dry dusts up to dust class ST1; direct extraction at small processing and workstation machines Advantages: - High suction output with negative pressure up to 10,000 Pa Guedswwt E Uspfx Af Dja - Optimal filter cleaning thanks to jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for greater cleanliness and health protection - Compact modular design minimizes required space - Energy savings due to standard frequency converter for precise adjustment of extraction performance - Low operating noise; integrated sound absorber and soundproofing elements enable installation directly at the workplace

Būklė: naujas, Gamybos metai: 2025, Clean Air Dust Extractor AL-KO APU 300 P Technical Data 300-P Inlet nozzle: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air volume flow: 6,000 m³/h Rated air volume flow: 5,089 m³/h Vacuum: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Gusdperrw Tbofx Af Dea Delivery time on request

Gamybos metai: 2021, būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: 021032-01610, MTA Air Purifier Manufacturer: AL-KO Model: Airsafe 1600 Professional air purifier for large rooms (conference rooms, classrooms, etc.) from 48 to 182 m², continuously adjustable air volume, equipped with pre-filter and main (particle) filter HEPA 13, control unit and filter change indicator. 1x replacement filter included. Effectively retains COVID-19 viruses! Continuously Adjustable Settings LOW MID HIGH Air filtration (m³/h) 800 1300 1600 Recommended room size* (m²) 48 – 96 79 – 158 91 – 182 Sound pressure level (dB[A]) 35 45 50 Power consumption (Watt) 31 116 191 Electrical connection: 230V/50Hz AC * Recommendation: 3 to 6 air changes per hour at a ceiling height of 2.75 m. Measured in a 9 x 10 x 2.75 m room, with average sound absorption, unit placed in the corner. Dimensions (W / D / H): 661 x 573 x 1900 mm Weight: 128 kg Serial No.: 021032-01610 Year of manufacture: 2021 Guedpfeim Rursx Af Dea Condition: Visual 1-2, Technically OK Used, lightly operated Used machines may show visual signs of wear due to previous use. (Subject to technical modifications and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal