Nedelsiant galima naudotis švaraus oro įrenginiu ir (arba) dulkių siurbliu.

AL-KO Power Unit 120 M

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Equipment Features: With innovative locking device for safe container positioning Dusdpfjcnw U Djx Ab Sjl All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: geras (naudotas), Gamybos metai: 2019, Weinig Conturex Greenline Plus CNC Fensterfertigungsmaschine Dedpjw N Nixefx Ab Sjul Beschreibung: Baujahr: 2019 Werkstücklänge (Bearbeitung): 4500 mm Automatische Teilekontrolle im Einlaufbereich Spannbackeneinstellung in Verbindung mit Falzspannern Hauptmotor 30 kW, indirekter Antrieb Unispindel für Schlitz-, Bohr- und Sonderbearbeitungen Werkzeugwechsler mit 35 und 17 Plätzen HSK 63F Werkzeugaufnahme Spezielle Software zur Maschinen- und Betriebsdatenerfassung Pufferlänge Zu-/Ablauf: 2000 / 2500 mm Optionaler Werkzeugsatz/Plan verfügbar Vollständige Beschreibung auf Anfrage (Trotz größter Sorgfalt bleiben technische Änderungen, Irrtümer sowie Preis- und Angabenänderungen vorbehalten. Für Druckfehler wird keine Haftung übernommen! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise zzgl. Inserierungskosten Machineseeker / Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden Holland

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Year of manufacture: 1997, connected load: 380V 5.2A 2.0kW, saw blade diameter: 350 mm, swivels 45° to both sides, height adjustable via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, right-hand roller conveyor with stop, cutting length: 3200 mm, left-hand roller conveyor with stop, cutting length: 2200 mm. Djdpfx Abswhn T Uj Ssul

Sąlyga: naudotas, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for single parts with rinse cycle. ----- Function features: Machine for horizontal flooding of single parts. The product is applied via a row of nozzles. Excess product is blown off by air jets. The pump and the air jets are automatically controlled and are only activated when a workpiece is passing through. This reduces compressed air consumption. The recirculation mode ensures minimal product usage. ----- Construction features: Structure Robust steel frame, painted with high-strength, water-soluble products. Machine body made of thick, hot-welded polypropylene panels. 4 independent chambers for infeed, flooding, blowing, and outfeed. Horizontal workpiece feed Via motor-driven grooved plastic rollers. Electric inverter for adjusting and changing the feed speed. Transmission The machine is equipped with an exclusive system that positions all transmission components outside the flooding chamber for easy operator access, ensuring longer operating life and facilitating maintenance operations. Moving components are protected by covers and appropriate seals. Recirculation pump Pneumatic double diaphragm pump with valves, seals, and diaphragms made of nitrile rubber, and a housing made of plastic material (PVDF). Dsdpfx Abenl Nqqj Soul Air jets The first chamber features an air-blow system to prevent product leakage. A second air-blow system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for setting the feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3–6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be impregnated mm 250 Max. width of workpieces to be impregnated mm 300 Max. height of workpieces to be impregnated mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinse circuit for Pro Flow ----- Price of the above machine: on request! Plus packaging and transport ----- (Technical specifications as per manufacturer – without guarantee! Illustrations may differ from the original, prices net, plus VAT (domestic))

Gamybos metai: 2004, Sąlyga: dilaminuotas dirbtuvėje (naudotas), No. 2054 1 used, partially overhauled and function-tested extruder Alphatec Type AE-S 75.28 Screw diameter 75 mm – 28 L/D Drive 75 kW – AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Dusdpfx Absiyya Ao Sol Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Large, semi-automated Pace cutting system Polar 137 XT-Autotrim with stack lift, jogging unit with counting scale, gripper transport system, turning gripper, and unloader, built in 2010, with approximately 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogging unit by the operator, jogged, and then automatically transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as required. After cutting, the Transomat automatically places the layers onto a pallet, while cutting can continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Equipped with steplessly adjustable reflex light barriers for automatic lifting or lowering. Jogging Unit RAH-4 with air removal roller and discharge for rear table feeding Usable format up to 75 x 105 cm. Djdpfx Ajxd U Sajb Soul The jogged material is automatically discharged to the rear into the STR stack rack. The Autotrans gripper transport system then handles the layer transport to the rear table of the high-speed cutter. Sheet scale – Polar Counting Scale Avery Weigh-Tronix for creating precisely measured cutting layers. Gripper transport system POLAR Autoturn – Clamp transport for rear table loading and turning gripper takes the prepared cutting layer from the stack rack or buffer table. Via air tables, whose air cushion optimizes material flow, the material is directly conveyed to the rear table of the high-speed cutter and deposited precisely there. The gripping system holds the cutting layer firmly during transport, ensuring layers stay perfectly aligned even when pre-aligned. Cutting machine Polar 137 XT-AT with touch operation and Autotrim function for automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear table loading), also enabling formats with a diagonal of...

Sąlyga: naudotas, No. 04480 Cross Cut and Mitre Circular Saw Graule ZS 135 N Used This machine type is designed for cross-cutting as well as horizontal and vertical mitre cuts; double mitre cuts are also possible. Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts. Fast mitre adjustment up to 25° horizontally and up to 45° vertically. Adjustable fixed stops at 90° and 45°. Machine can be set for mitre cuts in 2 planes. Adjustable aluminium fence plates. Robust cast iron construction. Dsdpfjw Htm Rsx Ab Ssul Lower saw blade guard can be connected to extraction system. 3 kW three-phase brake motor, 400 Volt (optional equipment). Saw blade diameter 350 mm, blade bore 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: cutting height 92 mm. Including aluminium saw blade, 350 mm diameter. Including machine stand for type ZS 135 N. Including roller conveyor RLK 3000 x 350 mm with length stop featuring measuring scale and rear-folding material stop, roller diameter approx. 40 mm. Transport dimensions machine approx. 1300x700x1700 mm (LxWxH), roller conveyor approx. 3000x500x800 mm (LxWxH). Weight approx. 300 kg. To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale as is. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer’s brochure or previous owner; no guarantee. Subject to prior sale. For used machines, all warranties are excluded; the following applies: “purchased as viewed”. Payment terms: Prices plus applicable VAT, payment before collection or dispatch. Delivery terms: ex stock.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007350, X-axis working area: 4000 mm Dodpfx Aswcyd Ieb Sjul Y-axis working area: 1400 mm Working table: with vacuum pod supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Sąlyga: naujas, Glass Bead Nailer "2 P Jumbo automatic E.C." – new – Your benefits: - Corner joints are closed - No open glass bead gaps - No color variations when painting - Glass bead frames are easy to allocate Staple Corner Joining Machine 2P Jumbo Automatic E.C. for stapling glass bead frames. Selectable between automatic and manual operation; With angle stop, top and front clamping device Pressure is adjustable independently. Insertion of parallel and stacked staples possible via electronic program control. Stapler can be mounted onto a suitable work table, Operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping costs ----- Pictures show the Staple Corner Joining Machine 2P with the option of a mobile work table (see surcharge details below) Surcharges: ----- Mobile work table Height adjustable from 700 – 1000 mm, 2 removable support rails, 1000 mm long each, plus 2 swiveling and slidable support rails, 1000 mm each, all rails covered with felt, 4 castors, 2 of which are lockable. ----- Surcharge: 992.00 Euro net Dsdjvnh T Nspfx Ab Sjul Staples: Packs 15 mm staples (pack of 2,000 pcs.): Price 21.00 Euro 12 mm staples (pack of 3,000 pcs.): Price 31.00 Euro 10 mm staples (pack of 3,000 pcs.): Price 31.00 Euro Dimensions and Weight ----- Jumbo Automatic E.C.: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices net. Plus statutory VAT. Ex works, plus packaging and shipping (Technical data according to manufacturer – subject to change without notice!)

Sąlyga: geras (naudotas), OFFER 70105 Technical Data: - Hole diameter approx.: 44, 45, 48, 52, 2 x 55, 2 x 58, 61, 66 mm - 2 x 68, 2 x 80, 81, 85 mm - Slot dimensions approx.: 12 x 42, 12 x 50, 18 x 55 mm - Punch holder: 58 mm Dsdpfxeg T S Axj Ab Seul - Punch height: 54 + 58 mm - Adapter ring for punch - Die height: 30 + 40 mm - Die outer diameter: 90 + 140 mm - Adapter ring for dies: 90 - 140 mm - Weight approx.: 90 kg