Vertikalios Atlenkimo Staklės Rausch Rs pirkti naudotą (53 932)

Gamybos metai: 1993, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 3694/895,

Gamybos metai: 1973, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 5116/447,

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, bendras svoris: 400 kg, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 3, with “CE” marking Tensile force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard broaching mandrels “Rausch system” Workpiece diameter: any (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm groove width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided protective enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Safety door with monitoring circuit (emergency stop loop) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (tool removal control to prevent unintentional return of the drawbridge, added safety for operator & tool) - Integrated coolant system - Coolant swivel system (without electric switching function) - Three-sided closed splash guard hood with wide front opening for working area - Extra reinforced chip basket and chip strainer with magnetic insert - Stainless steel operator panel with durable labeling - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking by manufacturer (1995) Remarks: The machine has been overhauled; the machine body has been fully reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system including the coolant/lubricant swivel system is new - New 2-speed SEW gear motor - New electrics (Siemens) - New safety door instead of light curtain - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, strainer, and spindle guard, are new Hjdjw Huh Njpfx Af Uel - Stainless steel operator panel with durable labeling - Machine is newly painted with 2-component structural lacquer The machine features “CE” marking by the manufacturer. General: The dual spindle drive ensures a steady and central pulling point as well as constant broaching speed. The machine is primarily designed for the production of keyways up to 18 mm (from 16 mm groove width only with stepped tool shanks). The machine, by design, is quick and easy to set up for broaching with flat broaching tools for keyway production. Due to the universally constructed drawbridge and machine table, both profile and flat broaching tools can be used without additional pullers.

Gamybos metai: 1968, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch RS 6G, unused, with "CE" marking Hodpfx Afsv Rmvzs Usl Pulling force: 60 kN (6,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Max. stroke: 1000mm Max. tool length: 1200mm Table size / working area: 610x470mm / 520x320mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 1600mm x 850mm x 1000mm (H= height from table to floor, excluding attachments) Motor power: 4.4kW / 5.5kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool rest - Protective cover for stroke adjustment - Oil-tight tray on the control cabinet - Electrical monitoring of clamping jaws (tool removal control to prevent unintended retraction of the pull bridge; additional safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain - Swiveling coolant supply system, with automatic coolant switching via the swivel system - Chip basket with magnet - Externally adjustable tool length setting system (repeatable across machines) - Stainless steel control panel with permanent labeling - 4 central lubrication points for the trapezoidal spindle drive, with manual grease gun Remarks: The machine has been completely overhauled. During the overhaul, the machine base, body, and table have been fully reconditioned. All wear parts have been replaced. The machine has been brought up to the current state of the art and complies with current "CE" regulations. The machine is marked with a "CE" certificate. General: The double spindle drive ensures smooth, central pulling action and constant broaching speed (broaching speed selectable at 3m/min or 6m/min). By design, the machine can be set up quickly and easily for broaching with flat broaches, particularly for keyway cutting. Thanks to the universally designed pull bridge and machine table, both profile and flat broaches can be used without the need for additional pull heads. Broaching tools and mandrels suitable for the machine are available on request.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, įėjimo įtampa: 400 V, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 03/2023 by Wiemers AG General Information / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" certification Tensile force: 40 kN (4,000kg) Broaching speeds: 3m/min and 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / Work area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Drive unit with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric monitoring of the clamping jaws (tool removal control to prevent accidental return of the drawbridge) - Integrated coolant system with solenoid valve (operated by swiveling system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (cross-machine reproducible) - 4 centralized lubrication points for the trapezoidal spindle drive - Enclosed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting connector) Remarks: The machine has been completely overhauled, the machine body has been fully refurbished. The following wear parts have been replaced: Hedjw H Dgnspfx Af Uel - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals have been renewed The coolant system (pump, check valve, and drain valve) including coolant/lubricant swiveling system is new - Coolant supply is controlled by a solenoid valve, switchable via the swiveling system - The drawbridge, clamping jaws, and rack segments are new - A deactivatable clamping jaw monitoring has been installed (additional safety for operator & tool breakage) - Safety door with interlock, signal indicator, and door lock - The tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches have been installed - Complete electrical system (control cabinet) is new - No PLC installed, machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - Machine has been newly painted with 2-component structural paint General The twin spindle drive ensures smooth and central pulling force as well as constant broaching speed (broaching speed selectable at 3m/min or 6m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyway slots. Thanks to the universally designed drawbridge and machine table, broaching with profile and flat broaching tools is possible without the use of additional pull heads.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, brošavimo ilgis: 1 000 mm, brochavimo pozicijų skaičius: 1, broachavimo greitis: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Refurbished mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Hedpfow Ighijx Af Usl Maximum tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: arbitrary Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height from floor without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine have been carried out: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (in emergency stop circuit) - Machine paneling below the safety door with chip protection and tool storage area - Electrical sensing of the clamping jaws (tool removal control to prevent unintentional return of the drawbridge) - Coolant swivel system with controlled solenoid valve during the swiveling process (for activating coolant before starting the broach stroke » optical lubrication flow inspection, no dry cutting!) - Routing of electrical cables in steel protective ducts - Heavy-duty control cabinet mounting for accommodating machine components - Additional oil-tight tray on the control cabinet - 3-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with permanent labeling - 4 central lubrication points for the trapezoidal spindle drive Remarks: The machine has been fully overhauled; the machine body is completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, solenoid valve, and drain valve), including coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All sheet metal and panels are new - The following components have been overhauled and reused: - Machine base - Machine stand - Machine table with table inserts - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (with new brake, new bearings) The machine is in our warehouse and can be inspected under power. The pictures attached are original images of the machine. The machine is CE marked. This "CE" corresponds to the state of 1998 (first overhaul).

Būklė: geras (naudotas), Veržlių ištraukimo staklės RAUSCH RS 6-1300 su gausia komplektacija Hjdpfex A Edqox Af Uol - Stūmoklio eiga / maks. eigos ilgis: 1300 mm - Traukimo jėga: 6000 kg - Darbinė įtampa: 380 Voltų - Įskaitant 38 x įgilintuvus - Įskaitant 95 x kreipiančiąsias įvores - Tarpinės plokštelės - Kranas - Darbo stalas - Platforma - 2 x įrankių spintos Matmenys: Ilgis x Plotis x Aukštis: 1,6 x 1,7 x 2,3 m / Svoris: 2000 kg Galimi netikslumai ar rašybos klaidos.

Gamybos metai: 1978, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 6006/478, Broaching Machine - Vertical Manufacturer: Rausch Model: RS8/1300 Year of Manufacture: 1978 Pulling Force: 8 tons Stroke: 1,300 mm Hedpfx Aofc T E Aof Usl Weight: 0.92 tons

Gamybos metai: 1960, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 758, Overhauled Pulling force: 2 t Lift: 1000 mm Hsdpfx Ajbrcmhsf Ujl

Gamybos metai: 1985, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 20236, Traction: 10 tons Hsdpfx Aobrcmrof Uol Lift: 1500 mm 1 broaching station Weight: approx. 1800 kg Power: 9.5 kW/380V With feeder and mechanical chip conveyor

Gamybos metai: 1992, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 662681751, Manufacturer: Rausch Hjdpefc T Edsfx Af Usl Model: RS6 / 1300 Machine number: 662681751 Year of manufacture: 1992 Power supply: 3-phase (3N~) 380 Volt / 50 Hz Connected load: 7.1 kW Rated current: 17 Amps Weight: 810 kg Circuit diagram number: RS6 – 39 With unit Table dimensions: 520 mm x 320 mm

Gamybos metai: 1962, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1083, Broaching Machine – Vertical Manufacturer: Rausch Model: RS10/915 Machine No.: 1083 Year of manufacture: 1962 Pulling force: 10 tonnes Stroke: 915 mm System: DIN 1415 With platform for above-floor installation Hsdpefc T Euofx Af Usl

Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: 3813, bendras svoris: 600 kg, galia: 7 kW (9,52 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, brošavimo ilgis: 1 000 mm, ruošinio skersmuo (maks.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of manufacture: 2019 Never commissioned Complete documentation Without broaching tools (broaching needles) Working area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm Hjdpfow Evkiox Af Uel External broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate dimensions: 255 mm x 400 mm T-slots: 2 pieces, 14 mm wide, parallel/perpendicular to the tool slide clamping surface Accessories/Special equipment: Coolant system Broaching tool safety device Machine cover for work area protection Space requirement: 0.72 m x 1.3 m x 2.67 m (LWH) Weight: 600 kg Voltage: 400 V Current type: Three-phase Υ/Δ 50 Hz Connected load: 12 kVA Max. fuse protection: 25A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching tool holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½" Please direct inquiries by email only. All information provided to the best of our knowledge. Subject to change and errors. This offer is aimed exclusively at entrepreneurs as defined by § 14 BGB. Sale takes place with exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, or for injury to life, body, or health. For further information, please visit the Witzenmann GmbH website under the terms 'Imprint', 'General Terms and Conditions', and 'Data Protection'.

Gamybos metai: 2012, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 60180, Verticalaus veleno paviršiaus šlifavimo staklės Republic Lagun VBM 1000-F Hsdpfx Asy Ey Dtof Uol

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, VERTICAL ELECTRONIC GLASS DRILLING MACHINE MODEL: PRIAM YEAR OF MANUFACTURE: 2026 / BRAND NEW The Priam model is a vertical glass drilling machine with two drilling spindles (double-sided), designed for customers seeking a functional and easy-to-operate machine that is also long-lasting. In developing this machine, we relied on traditional mechanical engineering principles—using heavy, heat-treated steel frames and mechanical solutions—to facilitate future operation and maintenance. Thanks to this distinct approach to machine design and manufacturing, our machine can drill glass for many years without interruptions, ensuring a multiple return on investment. To ensure the components of our glass drilling machine are manufactured with the utmost precision, we produce them in Poland in collaboration with local partners. The main frame of the machine is produced in-house, then heat-treated and further processed by local workshops. This allows us to maintain strict supervision throughout the entire production process, detecting and correcting any defects before the product is delivered to the customer. In this way, we also support the local machinery industry. The assemblies used in the machine comply with the highest European standards. Our suppliers include: SIEMENS, HITACHI, UNITRONICS, SCHNEIDER, GARLOCK. All mechanical components are readily available and can be quickly and easily replaced during machine operation. Expoglass Priam – Glass Drilling Machine – Top-Level Functionality ⦁ 2 drilling spindles (front and rear). These allow drilling through a glass pane in a single operation without needing to turn the glass over. ⦁ Electronically controlled loading bar. To set the distance between the lower glass edge and the drill hole, simply enter the desired measurement via a touchscreen; the machine will then automatically move to the correct position. ⦁ Quick drill-change mode. When the drill change button is pressed, both spindles are automatically locked (they cannot be rotated). The vertical plate between the two drills moves downwards, creating ample space between the drills. This allows for tool-free removal of the drills and provides generous room for convenient access. ⦁ Automatic (electronic) measurement of drill length and drill position. After a drill change is completed, an automatic calibration process takes place: the machine measures the drill length. This determines the distance between the glass pane and each drill tip, which is particularly important in small workshops where single-piece production is common. Hsdpsgq Dl Aefx Af Ujl ⦁ Automatic (electronic) determination of spindle depth positions. After the automatic spindle calibration and pressing the glass pane in place, the machine measures the glass thickness and automatically sets the optimal spindle depth positions. The operator then only needs to press the 'Drill' button; the drilling process proceeds fully automatically.

Būklė: geras (naudotas), Gamybos metai: 2008, For sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Hjdpfx Afey H Igle Uol Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindles Spindle unit drive rated power: 16.8 kW Rated torque: 100 Nm Speed: 1000 - 7000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Attention! The system will likely require some reprogramming as it was previously part of a complete production line. However, a standalone program is available. On request, transport and loading can be organized across Europe for an additional charge. Prices are subject to VAT. Inspection available by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality but affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach us via the contact form.

Būklė: geras (naudotas), Gamybos metai: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Hjdsy H Ifuopfx Af Uol Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive rated power: 16.8 kW Rated torque: 100 Nm Speed range: 1,000 – 7,000 rpm Traverse speed Z-axis: max. 30 m/min Traverse speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Please note: The system will probably need to be reprogrammed to some extent, as it was previously part of a complete production line. However, an individual program is available. Upon request, transport and loading can be organized throughout Europe for an additional charge. All prices plus VAT. Inspection available by appointment. Please contact us—our team looks forward to assisting you. Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or to contact us, please use the contact form.

Būklė: geras (naudotas), Gamybos metai: 1980, Informacija: Mašina buvo įmontuota į duobę! Hsdpjy H Ia Sefx Af Uel - Traukos jėga: maks. 25 000 kg - Stūmimo eiga: maks. 630 mm - Stūmimo greitis: 1 – 10 m/min - Grįžimo greitis: 7 – 25 m/min - Bendra prijungimo galia: 45 kW - Mašinos svoris: 5 500 kg Pageidaujant, visoje Europoje galime organizuoti transportavimą ir pakrovimą už papildomą mokestį. Kainos nurodytos be PVM. Apžiūra galima pagal susitarimą. Susisiekite su mumis – mūsų komanda mielai Jums padės. Mašinų pirkimas / pardavimas. GAMYBOS IR METALO APDIRBIMO MAŠINŲ, ĮRANKIŲ MAŠINŲ IR KITOS ĮRANGOS PIRKIMAS / PARDAVIMAS. Ieškote kokybiškos, bet nebrangios mašinos gamybai? Norite parduoti savo įrangą? Daugiau informacijos arba kontaktų rasite užklausos formoje.

Būklė: geras (naudotas), Gamybos metai: 2004, - Didž. traukos jėga: max. 160 kN - Stūmimo eiga: max. 1000 mm - Įrankio tiekimo eiga: max. 630 mm - Stalo plokštės plotis: 630 mm - Stūmimo greitis: 10 m/min - Grįžimo greitis: 23 m/min - Įdiegta galia: max. 88 kW Hsdpey H Iaxsfx Af Usl - Staklių svoris: 12 410 kg Pagal pageidavimą Europoje galime suorganizuoti pakrovimą ir transportavimą už papildomą mokestį. Kainos nurodytos be PVM. Apsilankymas galimas tik iš anksto susitarus. Susisiekite su mumis – mūsų komanda mielai padės! Staklių pirkimas / pardavimas GAMYBOS IR METALO APDIRBIMO STAKLĖS, ĮRANKINĖS STAKLĖS IR DAUGIAU. Ieškote aukštos kokybės, bet nebrangios staklės savo gamybai? O gal norite parduoti savąją? Dėl išsamesnės informacijos ar užklausų susisiekite su mumis per kontaktinę formą.

Būklė: geras (naudotas), Mašina geros darbo būklės, 3-žandikaulių griebtuvas, komplekte su įrankių laikikliais. Prispaudimo plokštė: 800 mm Didžiausias darbinis diametras: 1100 mm Didžiausias darbinis aukštis: 795 mm Hedpfx Aoy Hq Npjf Ujl Didžiausias darbinis svoris: 4000 kg Z ašis: 750 mm Veleno sūkių dažnis: 500 aps./min. Mašinos matmenys: 5630 x 4265 x 4530 mm Mašinos svoris: 13.500 kg

Būklė: naudotas, Gamybos metai: 2008, Siemens 840D Control Gear Hobbing Machines for Large Gears Hodpfx Aewzypnsf Uel Flexible and universal gear hobbing of gears Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing cylindrical gears applied across numerous industries: wind turbines, industrial gear units, mining and shipbuilding, gear production, and many others. The guideways are wide and equipped with hydraulically preloaded guides, which in combination with a separate linear guide and backlash-free rollers, ensure precise carriage movements at any feed rate. The table design provides optimal conditions for absorbing and transferring cutting forces to the machine base. The use of hydrostatic table bearings, in conjunction with the proven backlash-free double worm gear drive, guarantees precise table motion as well as the highest flatness and concentricity accuracy of the worktable. This holds true regardless of substantial fluctuations in workpiece weight and/or high machining forces. The motorized hobbing heads for external and internal gearing are tailored to the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal hobbing heads. The drive's performance range takes into account future tool developments. Naturally, the hobbing head drive is also backlash-free. These machines are particularly well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2005, veikimo valandos: 14 923 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 762 mm, Y ašies eiga: 305 mm, Z ašies eigos atstumas: 534 mm, padavimo ilgis X ašis: 762 mm, padavimo eiga Y ašimi: 305 mm, padavimo ilgis Z ašis: 534 mm, sukimo momentas: 45 Nm, valdiklių gamintojas: Haas, bendras aukštis: 2 700 mm, bendras ilgis: 2 200 mm, bendras plotis: 1 750 mm, stalo plotis: 267 mm, stalo ilgis: 1 213 mm, sukimosi greitis (maks.): 6 000 aps./min, bendras svoris: 1 315 kg, veleno greitis (maks.): 6 000 aps./min, ašies variklio galia: 5 600 W, veleno nosis: CT40/ISO/BT40, ašies skaičius: 1, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Three-axis vertical CNC milling machine Haas TM1 (TM-1) with a 6000 rpm spindle. The machine is offered by Haas-certified technicians with over 10 years of experience. The machining centre has undergone a full, comprehensive service, is refurbished, and ready for immediate operation. The sale is based on a KS agreement, with the option to issue a VAT invoice. A twin machine will soon be available for sale, with the possibility to purchase both units together. Optionally, the milling machine can be sold with installation and accuracy analysis using an advanced Renishaw Ballbar device, which carries out circularity testing with a precision of up to 0.0001 mm/0.1 μm. We provide technical support for the machine as needed! We assist with transport and financing! The milling machine is equipped with a range of additional options: - upgraded spindle up to 6000 rpm, - rigid tapping, - work coordinate tracking (rotation & scaling), - M19 spindle orientation, - macro programming, - HSM (High Speed Machining), - intuitive programming system for part programming, - potential activation of the 4th axis with inverter and cabling, available separately (fourth axis), Hodpfsyanlaex Af Ujl - air blast cooling. Technical data: - Machine type: Three-axis vertical milling machine Haas TM1, - Year of manufacture: 2005, - Spindle speed: 6000 rpm, - X-axis travel: 762 mm, - Y-axis travel: 305 mm, - Z-axis travel: 534 mm, - Table dimensions: 1213 x 267 mm, - Minimum spindle-to-table distance: 102 mm, - Maximum spindle-to-table distance: 636 mm, - Dimensions (W x D x H): 220 x 175 x 270 cm, - Weight: 1315 kg, - 3 T-slots, each 16 mm wide, - Spindle motor power: 5.6 kW, - Maximum spindle torque: 45 Nm, - Spindle taper: CT40/ISO/BT40. The machine has undergone a complete technical inspection. Ball screws, linear guides, lubrication system, spindle, spindle motor, encoder, vector drive, inverters, IO board, processor board, all components in the electrical cabinet, axis drives, tool changer, controller, and more have all been checked. Contact us for further details. We also offer import services on request and pre-purchase inspection for all Haas lathes and milling machines, including VF, VM, DT, DM, Mini Mill, EC, UMC, ST, DS, SL, TL series, and many others.

Būklė: naujas, Gamybos metai: 2025, Ref. No.: 10461 Manufacturer: IGREK Model: DT 4000 Year of Manufacture: 2025 Control Type: CNC Control Hjdpfx Afoxmd Suo Ujl Control System: SIEMENS SINUMERIK 840D SL Location: Istanbul Country of Origin: Türkiye Spindle Speeds: 4,000 rpm Turning Height: 2,000 mm Table Diameter: 4,000 mm Spindle Power: 37 kW Max. Table Load: 40 t Table Rotational Speed: 60 rpm Max. Turning Diameter: 5,000 mm Max. Turning Height above Faceplate: 2,000 mm Max. Spindle Torque: 1,200 Nm Spindle Mount: ISO 50 Machine Length: 7,500 mm Machine Width: 12,000 mm Machine Height: 9,500 mm Approx. Machine Weight: 125 t Additional Information: RAM Stroke: 2,100 mm RAM Cross-section: 350 x 350 mm Vertical Travel of Movable Crossrail: 2,000 mm Table Drive System: Segmented direct drive motors Table Torque: 8,200 Nm – 14,400 Nm max. Table Guide System: Hydrostatic bearings and guides IGREK DT 4000 – Your Solution for Precise Heavy-Duty Machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning lathe, specifically designed for the precision machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossrail, it enables efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key Features: Hydrostatic Rotary Table: The 4,000 mm rotary table with hydrostatic bearings ensures maximum precision and smooth operation when machining heavy workpieces. Movable Crossrail: The vertically adjustable crossrail with a 2,000 mm travel provides flexibility and adapts to varying workpiece heights. Powerful Spindle: Featuring spindle speeds of up to 4,000 rpm and a power output of 37 kW, this machine is built for demanding machining applications. High Load Capacity: The rotary table can accommodate workpieces weighing up to 40 tonnes, allowing processing of large and heavy components. Multifunctional Machining: Thanks to the live spindle and precise C-axis positioning, not only turning but also milling and drilling operations are possible, enhancing the machine’s versatility. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the demands of modern manufacturing processes. With its robust construction and versatile machining capabilities, it is the ideal solution for precision machining of large components across various industries.

Būklė: naudotas, Gamybos metai: 2014, 2 vertical turning machines (tandem set) Manufacturer: EMAG Model: VL 3 Year of manufacture: 2014 Control: Fanuc 31/32 i TECHNICAL DATA FOR VL3 MACHINE (Subject to errors) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-axis travel: 400 mm Z-axis travel: 200 mm Loading time (depending on clamping device): 2-4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Max. spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor (40/100% duty cycle): 25 / 16 kW Full power from spindle speed (100% duty): 1,800 rpm Torque (40/100% duty cycle): 134 / 85 Nm FEED DRIVE Rapid traverse speed, X: 60 m/min Rapid traverse speed, Z: 30 m/min Feed force, X and Z: 5 kN Ball screw diameter in X/Z: 40 mm TURRET Disc-type tool turret DIN 69880, 12 stations Tool shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage - DC: 24 V, AC: 230 V Frequency: 50 Hz Connected load without / with driven tools: 28 / 31 kW Power supply protection: 50 A DIMENSIONS AND WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides on the X-axis outside the working area. Portal slide including slide guidance. Motor spindle mounting. AC synchronous drives for X and Z-axes. Encapsulated linear measuring systems. Resolution of all axes: 0.001 mm, absolute measurement. Rapid traverse speed: X-axis 60 m/min, Z-axis 30 m/min 1 MOTOR SPINDLE, size 5, DIN 55026 Max. speed: 7,500 rpm Power at 40 / 100% duty cycle: 25 / 16 kW Torque at 40 / 100% duty cycle: 134 / 85 Nm HYDRAULIC UNIT with gear pump. CENTRAL OIL SUPPLY for lubrication of ball screws and roller recirculating guides. COOLING UNIT The cooling unit regulates the machine’s thermal balance. Motor spindle, turret, and control cabinet are kept at ambient temperature. TOOL CARRIER SYSTEM 1 DISC-TYPE TURRET, 12 stations with Ø40 mm DIN 69880 mounting bores. Shortest index time with electric motor drive. Cooled for constant accuracy. Internal coolant supply to the tool in machining position. Hodpfjytn Emjx Af Ujl WORKPIECE STORAGE AND FEED SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces Ø 30 – 85 mm or 18 workpieces Ø 30 – 130 mm Max. workpiece height: 100 mm Loading height: 1,020 mm. Chain conveyor with transport prisms. Workpieces are NC-positioned for takeover by clamping device. The pick-up spindle takes raw parts directly from the conversion-free workpiece storage and transport conveyor. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY UNIT with integrated coolant tank (capacity: approx. 300 l), coolant filter. Coolant pump delivery: approx. 80 l/min at 7 bar. 1 CHIP CONVEYOR Chip discharge height: 1,250 mm, hinged belt design. 1 EMULSION MIST EXTRACTION from the machining area. ADDITIONAL EQUIPMENT AND EXTENSIONS WORKPIECE STORAGE AND TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP DEVICE OP20 COOLANT AND DISPOSAL SYSTEM 1 FLUSHING NOZZLES (working area: 2x, base body: 1x) HYDRAULICS AND PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR (with mounting) 1 PICK-UP DEVICE BLOW-OFF (with 2 nozzles, without maintenance unit — see maintenance unit for compressed air)

Būklė: geras (naudotas), Gamybos metai: 2018, Ref. No.: 10531 Manufacturer: HONOR SEIKI Model: VL - 400CM Year of manufacture: 2018 Control type: CNC CNC Control: Siemens SINUMERIK 840D Hjdpfsy Ed Ezjx Af Uel Location: Halberstadt Country of origin: Taiwan Machine No.: 79XXX C-axis: Yes C-axis speed: 50 - 2,250 rpm Turning height: 2,370 mm Table diameter: 4,000 mm Rapid traverse speed X-axis: 10 m/min Rapid traverse speed Z-axis: 10 m/min Table rotation speed: 1 - 85 rpm Max. workpiece weight: 30,000 kg Max. turning diameter: 4,000 mm Distance between faceplate and crossrail support: 820 - 3,320 mm Feed rate: mm/min Number of tools in chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle drive motor: AC 60/75/100 kW Servo motors (X/Z axes): 5.5 / 5.5 kW Machine length: 9,000 mm Machine width: 7,000 mm Machine height: 8,000 / 9,100 mm Machine weight approx.: 115 t Additional information: - 2-stage gear change - ATC (Automatic Tool Changer) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC 15/18.5 The machine is still in production and can be inspected by prior arrangement.