Sidel Sbo 6/10 pirkti naudotą (68 852)

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6,000 bottles/hour Max. bottle size: 3,000 cc Blow stations: 6 The machine is in very good, well-maintained condition. GENERAL INFORMATION The SBO 6/10 features 6 moulds and 10 heating modules. Suitable for a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel’s two-stage PET stretch blow moulding machines require pre-manufactured preforms to be fed into the machine. Separating bottle production from preform manufacturing enables production optimization, greater operational flexibility, and higher productivity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9 – 41 mm (measured from bottom edge of support ring) Minimum neck internal diameter: 19 mm Maximum neck external diameter: 34 mm Preform support ring diameter: 29 – 51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle volume: 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (for still and carbonated liquids) 0.25-liter bottle: 14-20 grams 0.50-liter bottle: 20-33 grams 1.00-liter bottle: 26-40 grams 1.50-liter bottle: 35-51 grams 2.00-liter bottle: 44-58 grams 3.00-liter bottle: 68-84 grams BLOW MOULDING WHEEL Height: 3.5 meters Number of moulds: 6 Clamping force: 10 tonnes Discharge height (under neck): approx. 1.4 meters Machine DC drive motor output: 4 kW HEATING SECTION Height: 2 meters Number of oven heaters: 10 Heating zones per unit: 8 Max. output: 170 kW ELECTRICITY CONSUMPTION Max. connected load: 200 kW Average consumption: 100-150 kWh (varies by bottle produced) COMPRESSED AIR Available pressure: 7-35 bar Pressure: 7 bar Flow rate: 50–100 Nm³/h (varies by bottle produced) Ledpfog Ailcex Abrsab Blow pressure – champagne base: up to 25 bar Blow air flow – champagne base: 110–550 Nm³/h Blow pressure – petaloid base: up to 35 bar Blow air flow – petaloid base: 155–770 Nm³/h COOLING WATER Temperature: 10-12°C Pressure: 5-6 bar Flow rate: up to 6 m³/h Cooling requirement: up to 16,000 Kcal/h WEIGHT Blow moulding wheel with moulds: 8 tonnes Heating section: 2.2 tonnes Preform feeder: 0.65 tonnes Control cabinet: 0.85 tonnes PREFORM HEATING SECTION The preforms are transported neck upwards to the heating unit. This unit continuously ensures that preforms are inverted before passing (neck down) in front of the heating modules, and then turned again. During the heating phase, preforms are rotated and their necks are shielded from heat to optimize temperature distribution without deforming the neck. Heating is provided by 10 heating modules. Each unit can be fitted with up to 8 horizontally stacked, air-cooled infrared lamps. The heating power of each of the 8 lamp zones is adjustable to optimize the thermal profile. These zones are regulated on all SBO models. After heating, infrared temperature measurement of the preform allows further regulation of controlled zones, ensuring uniform preform temperature is maintained.

Būklė: naudotas, Gamybos metai: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has been professionally dismantled, and is stored in a warehouse. Ledpjrkgy Ujfx Abrsab Technical Details - Output: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for mould shells - Number of heating modules: 10 - Neck finish: 29/25 - Operating hours: 47,000 - The machine has been serviced regularly Machine equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blow wheel for 6 cavities - Sidel control cabinet - Sidel PCC drive & control panel - Comprehensive spare parts list available on request

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, produkto aukštis (maks.): 380 mm, ruošinio skersmuo (maks.): 130 mm, gamybos pajėgumas: 7 200 vienetas/val, TECHNICAL DETAILS Number of molds: 6 Capacity with standard bottles: up to 7,200 bph Lodpfx Aex A Uu Eobreab Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Internal neck diameter: 34 mm MACHINE DETAILS Dimensions & weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform loader dimensions: 2,000 x 2,500 mm Preform loader weight: 250 kg Feeding rails length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 - 12 °C Flow rate: up to 6.0 m³/h Water pressure: 5 - 6 bar Compressed air Service air pressure: 7 bar Service air flow rate: 50 - 100 Nm³/h Blow air pressure: up to 35 bar Blow air flow rate for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform loader Feeding rails Adaptation to other voltages possible

Būklė: naudotas, Geschwindigkeit: 8.000 Flaschen pro Stunde mit 0,5-Liter-Flasche. Verschiedene Formate optional möglich. Laedpfxoxytvie Abrjb Die Demontage erfolgte durch die Seegräber GmbH Anfang Februar 2018. Im Lieferumfang enthaltene Maschinen: - SIDEL SBO 6 Streckblasmaschine, komplett überholt durch SIDEL im Jahr 2006. - Preform-Magazin und Preform-Elevator Kompressor, Kühlung und Formen sind nicht enthalten.

Būklė: naudotas, Gamybos metai: 1998, Automatic PET Bottle Blow Moulding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Output: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L bottle moulds Preform feeder Lasdpfx Aboutni Rsreb Chiller unit Technical condition: used machine, fully operational until disassembly. The machine is currently dismantled, assembled in components, and prepared for transport. Complete and original technical documentation.

Būklė: naujas, Parts for SIDEL blow molding machine Ball bearings O-rings Nozzle Lajdpfx Asiqum Ijbrjb Belts Axle

Būklė: naudotas, Gamybos metai: 1992, Overview This blow molding machine was built in 1992 by the French manufacturer Sidel. It is capable of producing up to 4,000 bottles per hour. Technical Details Output: 4,000 bph 4 cavities Scope of Supply Blow molding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Laodpenpbhvjfx Abrjb Two mold sets for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL

Būklė: geras (naudotas), Included in the delivery: 10x stackable transport boxes, used Manufacturer: SSI Schäfer Type: 14/6-4 Design: double-sided recessed grips Colour: blue Material: Polypropylene External dimensions (LxWxH): 210x150x123 mm Internal dimensions (LxW): 190x123 mm Usable height when stacked: 110 mm Capacity: 2.50 litres Stackable: yes Weight per unit: 0.266 kg Note: These are used stackable transport boxes. Scratches, soiling, and colour defects may be present. Application area: Lodpfx Aepl Tdgobrjab The stackable transport boxes are suitable for storing tools, screws, and other small parts. General information about the item: This item is offered for collection only. Any transport or shipping desired beyond this is associated with additional costs, which can be provided separately depending on delivery location or delivery volume.

Būklė: naudotas, tuščias svoris: 7 720 kg, didžiausias leistinas svoris: 26 280 kg, bendras svoris: 34 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 08/1998, krovinio erdvės tūris: 60 m³, bendras ilgis: 2 550 mm, bendras plotis: 3 950 mm, pakaba: oras, padangos dydis: 385/65R22.5, spalva: raudona, rida: 1 001 km, pavaros tipas: kitas, vairuotojo kabina: kitas, Įranga: ABS,

Būklė: naujas, Gamybos metai: 2020, Model: KPZ-2 Type: Enclosed Working Dimensions: 900 mm W x 1300 mm H x 900 mm D Lasdpfx Aeb Al Sbjbreb External Dimensions: 980 mm W x 2100 mm H x 1600 mm D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of Filters: 3 Filter Surface Area: 22.5 m² Fan: Aluminium Fan Noise Level: 74 dBa Air Consumption: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available on request.

Būklė: naudotas, Gamybos metai: 1992, Automatinė PET butelių pūtimo mašina Gamintojas: SIDEL Tipas: SBO 4 S1 Metai: 1992 Našumas: 4 000 (1,5 L / 2 L buteliams) Įdiegta galia: 150 kW Ledswa Rhropfx Abroab Komplekte 1,5 L formos Preformų padavėjas Techninė būklė: naudota mašina, įsijungia, programa veikia gerai

Būklė: naudotas, rida: 580 km, galia: 66 kW (89,73 AG), pirmoji registracija: 05/1962, kuro tipas: dyzelinas, sėdimų vietų skaičius: 22, pavaros tipas: mechaninis, spalva: smėlio spalvos, Gamybos metai: 1962,

Būklė: naudotas, Gamybos metai: 2013, 10 MVA cast resin transformer, 10,500 V ± 2x2.5% / 6,000 V, Yy0, year of manufacture 2013 Lsdetwwm Uepfx Abrjab

Būklė: naudotas, Gamybos metai: 1999, - PET stretch blow molding machine, manufacturer: Sidel, model: SBO 16, equipped with preform tipper, preform chute, unscrambler, preform conveyor, year of manufacture: 1999, already dismantled, for sale ex works. Lsdporazwrsfx Abroab - PET stretch blow molding machine, manufacturer: Sidel, model: SBO 20, equipped with preform tipper, preform chute, unscrambler, preform conveyor, year of manufacture: 1999, already dismantled, for sale ex works. Offered at a special price.

Būklė: naudotas, Gamybos metai: 2008, Naudotas Combiblock Sidel SBO 20 Universal, našumas 36 000 butelių/val. Naudotas Sidel SBO 20 Universal Combiblock, kurio našumas siekia 36 000 butelių per valandą, yra integruota išpilstymo sistema, sujungianti pūtimo, užpildymo ir uždarymo funkcijas viename įrenginyje. Ši mašina skirta PET butelių gamybai, o jos pajėgumas – iki 36 000 butelių per valandą. Sidel SBO 20 Universal pūstuvė turi 20 formų, leidžiančių užtikrinti efektyvią ir nenutrūkstamą gamybą. Sistema komplektuojama su preformų padavimo bunkeriu ir išrikiavimo moduliu, garantuojančiu pastovų žaliavos srautą gamybos procese. Europa WM 60 užpildymo/uždarymo blokas integruotas Combiblock įrenginyje, kas optimizuoja erdvės panaudojimą ir sumažina perdavimo laiką tarp pūtimo ir užpildymo etapų. Toks kompaktiškas dizainas didina eksploatacinį efektyvumą ir sumažina užteršimo riziką. Sistema naudota natūralaus mineralinio vandens išpilstymui į 0,5 l butelius, su 26,6 mm Alaska tipo kaklelio modifikacija. Mašinos žingsnis – 113 mm, pritaikytas specifiniams gamybos poreikiams. Ljdpfx Aovgu D Sjbrsab Šiuo metu įrenginys sandėliuojamas, paruoštas montuoti ir naudoti naujoje gamybinėje linijoje. Prieš paleidžiant rekomenduojama atlikti pilną techninę apžiūrą, kad būtų užtikrintas optimalus darbas. Maitinimo įtampa – 400 V, dažnis – 50 Hz (standartas daugelyje pramoninių įmonių). Skubus Combiblock sistemos prieinamumas – puiki galimybė įmonėms greitai padidinti gamybinius pajėgumus. Combi sistemos pranašumai, lyginant su tradicine sistema Combi sistema, tokia kaip naudotas Sidel SBO 20 Universal Combiblock, turi daug pranašumų prieš tradicinius sprendimus, kai kiekviena operacija atlieka atskira mašina (pūtimas, užpildymas ir uždarymas). Visų pirma, kompaktiškas dizainas žymiai sumažina užimamą plotą, o tai leidžia efektyviau išnaudoti erdvę bei dažnai mažina infrastruktūros sąnaudas. Be to, Combi sistema pašalina tarpinio konvejerio ir kaupimo zonų poreikį tarp atskirų etapų. Tokia proceso supaprastinta schema mažina techninės priežiūros išlaidas, sumažina užstrigimų ar gedimų riziką ir didina visos linijos efektyvumą. Tarpinių etapų nebuvimas taip pat sumažina užteršimo galimybę, kas yra itin svarbu maisto ir gėrimų sektoriuje. Integruotas pūtimo, užpildymo ir uždarymo procesas trumpina gamybos laiką, nes visi veiksmai vyksta nepertraukiamai. Tai leidžia didinti bendrą linijos greitį ir valandinį našumą. Didėjantis efektyvumas reiškia ne tik aukštesnį produktyvumą, bet ir žymiai mažesnes energijos ir eksploatacijos sąnaudas. Galiausiai, Combi sistema reikalauja mažiau personalo linijos valdymui ir priežiūrai, nes visos operacijos stebimos per centralizuotą valdymo pultą. Tai supaprastina darbo procesus ir palengvina kokybės kontrolę viso gamybos ciklo metu.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production Line with Robot, Rotary Table, and Additional Automation Year of manufacture: 2011 Clamping Unit: Clamping force: 6.25 t Clamping system: hydraulic Control system: BABYPLAST - Touchscreen Additional Equipment: Production line with robot, rotary table, and additional automation Vertical injection molding machine Air valves Injection for parting line Lajdpfxsy Smgzs Abrjb Automatic adjustment of injection unit settings (up - down) The rotary table is driven by a servo motor, controlled via frequency inverter – highly precise Automatic parts feeding with quality control system Operator workstation protected with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: naujas, tuščias svoris: 3 650 kg, didžiausias leistinas svoris: 6 350 kg, bendras svoris: 10 000 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 6 250 mm, krovinių skyriaus plotis: 2 480 mm, krovos erdvės aukštis: 2 420 mm, krovinio erdvės tūris: 37 m³, pakaba: oras, padangos dydis: 245/70 R 17,5, spalva: kitas, pavaros tipas: kitas, priekinės padangos dydis: 245/70 R 17,5, galinės padangos dydis: 245/70 R 17,5, vairuotojo kabina: kitas, emisijos klasė: nėra, Įranga: ABS, galinis keltuvas, suspausto oro stabdys,

Būklė: naudotas, Gamybos metai: 1997, Sheet width: 3100 mm Sheet thickness: 6.35 mm Sheet thickness for stainless steel: 4.00 mm Cutting angle: 0.5 - 2.5 ° Blade gap adjustment: 0.05 - 0.8 mm Strokes per minute: 12 - 50 Backgauge (adjustable): 1000 mm Control: DELEM DAC 360 Oil capacity: 120 l Motor power: 9.5 kW Weight: 7000 kg Dimensions (LxWxH): 3950 x 1950 x 1680 mm Well-maintained condition (!!) Fitted with new DELEM control unit Equipment: - Electro-hydraulic, guillotine plate shear with guided ram - DELEM CNC control unit type DAC 360 * Front control panel, swivel-mounted on front left Ljdpfey I Dbbox Abroab - Electro-hydraulic cutting angle adjustment - Electro-hydraulic blade gap adjustment - Electro-motorized backgauge with ball screw spindles - 1x extra long side stop with T-slot & mm scale + 1x support stand - 2x front support arms with mm scale - Front finger guard - 1x movable foot switch - Operating manual (PDF) * Special accessories included: - Pneumatic sheet holder for thin sheet cutting - Spare blades upper/lower

Būklė: naudotas, rida: 440 000 km, galia: 320 kW (435,08 AG), pirmoji registracija: 02/2010, kuro tipas: dyzelinas, bendras svoris: 26 500 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 03/2026, spalva: žalia, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 5, Gamybos metai: 2010, Įranga: ABS, elektroninė stabilumo programa (ESP), kranas, oro kondicionavimas,

Būklė: naudotas, rida: 440 000 km, galia: 320 kW (435,08 AG), pirmoji registracija: 02/2010, kuro tipas: dyzelinas, bendras svoris: 26 500 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 03/2026, spalva: žalia, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 5, Gamybos metai: 2010, Įranga: ABS, elektroninė stabilumo programa (ESP), kranas, oro kondicionavimas,

Būklė: naudotas, We offer here used shelving racks. TECHNICAL DATA Lajdpfx Aoy Hqrksbreb Manufacturer: FX Rauscher Model: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pieces Boltless assembly Configuration: single-sided Material: steel, galvanized PRICE €506.50 net (2 starter bays + 8 add-on bays) €602.74 gross incl. VAT Bulk Pricing Starter bays: 1 - 5 pcs: €70.00 net each 6 - 20 pcs: €66.63 net each 21 - 50 pcs: €63.25 net each from 51 pcs: €59.88 net each Add-on bays: 1 - 5 pcs: €50.00 net each 6 - 20 pcs: €47.50 net each 21 - 50 pcs: €45.00 net each from 51 pcs: €42.50 net each Large quantities available directly from stock. YOUR CONTACTS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at additional cost. The extra charges depend on the delivery location and shipment size and can be quoted individually upon request. PROJECT PLANNING Our sales team is happy to prepare a non-binding, tailor-made quotation according to your requirements. TRANSPORT & ASSEMBLY We are pleased to assist you with transport and assembly of the equipment. PAYMENT TERMS Payment conditions will be coordinated upon order. The price quoted is per item/net price, unless otherwise specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for trade, industry, and craft businesses. We continually offer attractive used equipment from various manufacturers/brands at competitive conditions. Should you have any questions, please do not hesitate to contact us. Four winning factors — The building blocks of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Būklė: geras (naudotas), Gamybos metai: 1997, Reguliuojama traversa, krano traversa, salės kranas, krano kablio traversa, krovinio traversa, sunkiasvorė traversa, išlyginamoji traversa - Gamintojas: LHS-Lastaufnahmemittel, išlyginamoji traversa įvairiems kroviniams transportuoti - Tipas: TIV 10-6 Lsdpfey D Hk Rox Abrsab - Keliamoji galia: 10 t - Transportavimo matmenys: 6030/410/H930 mm - Savasis svoris: 720 kg

Būklė: naudotas, rida: 175 000 km, galia: 300 kW (407,89 AG), pirmoji registracija: 05/2022, kuro tipas: dyzelinas, sėdimų vietų skaičius: 45, pavaros tipas: automatinis, emisijos klasė: Euro 6, spalva: balta, stabdžiai: retarderis, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas, vonios kambarys,

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 32 536 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: B1377, spaudimo jėga: 62 kN, varžto skersmuo: 12 mm, tarpas tarp stulpų: 77 mm, darbinio tūrio: 6 cm³, įpurškimo slėgis: 1 860 juosta, formos aukštis (min.): 70 mm, išmetimo jėga: 5 000 N, išstūmimo eiga: 45 mm, atvērimo eiga: 110 mm, plokštės plotis: 77 mm, plokštės aukštis: 77 mm, įrengimo aukštis: 180 mm, bendras ilgis: 1 160 mm, bendras plotis: 700 mm, bendras aukštis: 1 950 mm, bendras svoris: 250 kg, slėgis: 1 860 juosta, galia: 3 kW (4,08 AG), įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, cilindro skersmuo: 12 mm, darbo valandos: 32 536 h, atidarimo plotis: 110 mm, Įranga: dokumentacija / vadovas, For sale is a very well-maintained Babyplast 6/10P injection moulding machine from the year 2017. The machine has only been operated by a professional moulder, has been regularly serviced, and is in excellent condition. With only 32,536 operating hours, it belongs to the lesser-used machines in its performance class and is ready for immediate use. Thanks to extensive additional equipment, this unit offers optimal conditions for efficient, precise, and stable production processes. Save on dealer commission by purchasing directly from the machine owner. Several machines are available immediately. All machines have identical equipment; operating hours may vary but are within a similar range. If you are interested, please contact us—we can also offer you an attractive package price. Equipment & Highlights Ljdpfx Abeyuuh Djrjab ✔ Sorting flap – ensures clean part ejection and optimised parts handling ✔ Ceramic heating beads – enable higher processing temperatures and energy-efficient heating ✔ Electric mould heating unit – provides precise mould temperature control ✔ Robust machine frame – ideal for operation and maintenance ✔ Blow-off unit – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Technical Data – Babyplast 6/10PT Plasticising Unit - Plunger diameter: 12 mm - Shot volume: 6 cm³ - Specific injection pressure: 1830 bar Clamping Unit - Clamping force: 62.5 kN - Moving force: 4 kN - Opening stroke: 30–110 mm - Ejector force: 5 kN - Ejector stroke: 45 mm Dimensions: - Weight including frame: approx. 250 kg Packed dimensions: L: 116 cm W: 70 cm H: 195 cm The sale is made under exclusion of any warranty and liability for material defects.

Būklė: naujas, Gamybos metai: 2025, New blow bars BKS 400 and BKS 401 for e.g. SBM 10/6/4 Export or Tesab RK 623, made of chrome cast iron, dimensions approx. 610 x 264 x 123 mm, weight approx. 103–110 kg. Available immediately, subject to prior sale. Laedpfxeq Ecw Hj Abrob