Ruchser Ru-Gls-Ed 45° pirkti naudotą (16 751)

Būklė: naujas, Number of motors: 2 units Working length: 2650 mm Control: manual Ruchser RU-GLS-ED 45° glazing bead saw ----- Nodpexmk Dqofx Abbewf Designed for cutting glazing beads in pairs The RU-GLS-ED 45° double glazing bead saw is manually adjustable to size. The machine is designed for the simultaneous cutting of two glazing beads at a 45° angle and is equipped with one fixed and one movable saw unit. The manual length adjustment is equipped with an electronic digital display. Cutting lengths from 150 mm to 2650 mm can be processed. During the cutting operation, the glazing beads are clamped from above and from the front by a pneumatic clamping system to prevent tilting. Operation is via a safety two-hand control. Saw blade diameter: 250 mm, length: 3700 mm, width: 700 mm, voltage: 400 V. Item 1: RU-GLS-ED45° Double Glazing Bead Saw ----- with manual size adjustment, for cutting glazing beads in pairs, cutting angle 45°. Manual length adjustment with electronic digital display, cutting length from 150 – 2650 mm. Pneumatic clamping device from above and from the front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, voltage 400 V. ----- Base price for the above configuration: on request! ----- Ex works. Packing and shipping not included Options at additional cost: ----- Item 1.1 Insert set for rabbeted glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after assessment of the glazing beads. Depending on the number of glazing beads used, multiple insert sets may be required. In order to determine the exact number needed, we require profile drawings of the glazing beads to be used before order confirmation. Surcharge: on request, after receipt of your glazing bead drawings. Item 1.2 Mounting device for measuring gauge on RU-GL for transferring measured values to the saw, with pneumatic installation. Surcharge: 611.00 Euro Item 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm. Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the length of glazing beads. Surcharge: 478.00 Euro Item 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm. Measuring gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the length of glazing beads. Surcharge: 428.00 Euro Item 1.5 Operating time switch unit for independent extraction. Adjustable from 5 sec. up to 3 hrs. For each sawing operation, extraction runs automatically for the preset time. If another sawing operation takes place within this time, the extraction time resets. Surcharge: 702.00 Euro Item 1.6 1 set of carbide-tipped saw blades RU-GLS-P45 and RU-GLS-ED45°. D = 250 mm x 3.2/2.2 x 30, 80 teeth, consisting of 1 saw blade each L6444 (right) and L6443 (left) with special 43° grinding. Surcharge: 576.00 Euro ----- All prices in Euro, net, plus statutory VAT. (Technical information as per manufacturer's specifications, without guarantee!)

Būklė: naujas, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Glazing Bead Saw on Sliding Worktable Designed for parallel cutting of glazing beads on the sliding worktable. The RU-GL glazing bead saw is mounted on a sliding worktable with sensing and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a manually movable carriage. Pneumatic clamping device from the top and the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding worktable with felt covering, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable support rollers for positioning sashes. Pos. 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H) !!! Mounted on sliding worktable with sensing and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage, manually adjustable. Pneumatic clamping from above and from the side. Safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding worktable with felt overlay, total length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable support rollers for positioning window sashes. ----- Base price as specified above: on request! ----- Plus packaging, shipping, and the current material surcharge of 6% of the total price Options with additional charges: ----- Pos. 1.1 1 Set of carbide-tipped saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, consisting of 1 blade each L1233 (left) and L1085 (right), with special 43° grind. Surcharge: 421.00 Euro Pos. 1.2 Holding device for measuring gauge on RU-GL Nwsdpfx Abexmkz Nebof for transferring measured dimensions to the saw, with pneumatic installation. Surcharge: 611.00 Euro Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 478.00 Euro Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm Gauge made from square profile with 2 fixed and 2 adjustable cams for measuring the glazing bead length Surcharge: 428.00 Euro Pos. 1.5 Spacer set for rabbeted glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after assessment of the glazing beads. Depending on the number of glazing beads used, several spacer sets may be required. To determine the exact quantity, we require profile drawings of the glazing beads to be used before order confirmation. Surcharge: on request, upon receipt of your glazing bead drawings Pos. 1.6 Operating time control for independent extraction system. Adjustable from 5 seconds to 3 hours. With each sawing operation, extraction is activated for the preset time. If another cut is made within the extraction interval, the time restarts. Surcharge: 702.00 Euro ----- Total price ...

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner, 10,500 kW, oil + gas. Year of manufacture: 2013. Njdevrkcnopfx Abbewf

Būklė: naujas, Fitting Storage yes Working width 3000 (3500) mm Swiveling yes Ruchser RU-BM-3000 (Option: 3500) Sash Assembly Table ----- Manufacturer Description: Pos. 1.0 Item 0610000 RU-BM-3000 Sash assembly table for sashes up to max. 2500 mm in height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, tilt of the working platform manually adjustable. Usable width 2500 mm. Mounting for fitting shear or fitting punch. 10 swiveling support arms for hooking in the sashes, fully pneumatically foldable for unhindered movement of the sashes on the table surface. Device for measuring the sash fitting length for constant and variable/central handle positioning and any handle height for pre-drilled sashes, color-coded dimensioning for the fittings. Support arm height can be set at a stop to either 50 or 60 mm. RU-SH, special screwdriver with pneumatic depth stop mounted on carriage, safety control, pneumatic height adjustment, screw feeding device with automatic shut-off of the filler hopper manual feed for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels, mounted on the carriage. RA-4 support rail adjustable in depth manually left and right with one 4-position turret stop each. PSF – pneumatic clamping device for sashes against side stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, glide, or brush strips are required as surface supports. Pos. 1.1 Item 6315 RU-BM-... fitting set according to customer specification Pos. 1.2 Item 0500000 Holder adapted to customer punch or shear. For mounting a customer-supplied fitting punch or fitting shear (third party) on the assembly table. Please specify the manufacturer when ordering!!! ----- Price RU-BM-3000 as per above specification ex works: on request! ----- Options Fitting Storage for RU-BM-3000: ----- Variant Fitting Storage fixed-mount: Price €5,468.00 Item 0630000 RU-BL-30/30 Fitting Storage fixed-mount mounted above the sash assembly table length 3100 mm, depth 1250 mm, with 3 shelves each having 10 compartments separated with dividers. Variant Fitting Storage free-standing: Price €6,017.00 Item 0710000 RU-SBL3000/30 Fitting Storage free-standing, length 3100 mm, depth 1250 mm, height 2050 mm, stand frame at the front without supports, 30 compartments arranged in one row of 10 each separated by dividers and one continuous top shelf, compartment size: width 280 mm, height 150 mm. 4 pcs. angle shelves for corner drives: Price €609.00 Leg length 120x120mm; angle approx. 3° The front edge of the angles is bent upwards by 5 mm to prevent accidental unloading. 2 pcs. left and 2 pcs. right under the first shelf of the fitting storage. ----- Surcharge for RU-BM-3500 ----- Item 0610300 RU-BM-3500 sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, tilt of the working platform manually adjustable, usable width approx. 3000 mm Surcharge RU-BM 3500 compared to RU-BM 3000: €2,811.00 Nsdjt Tq Aajpfx Abbewf Fitting storage for RU-BM-3500 (only possible as free-standing): Price EUR ...

Būklė: naudotas, Gamybos metai: 2013, Iš viso yra 6 vnt., kaina nurodyta už vieną stalą Privalumai: - Dėl siauro rėmo konstrukcijos lengvas prieinamumas prie elementų iš visų pusių - Didelė padėties reguliavimo zona – deimanto formos atramas galima ištraukti - Įrankiai ir smulkios detalės visada po ranka ant montavimo stalų lentynos - Atraminės sijos, padengtos guma, šereliais, slydimo juostelėmis arba veltiniu, pagal pasirinkimą - Naudojant įrankių laikiklius – jokių kabelių raizgalynės: įranga visada prieinama darbo vietoje Nsdsyx Hpcjpfx Abbjwf Komplektacija: - Darbinis paviršius padengtas profiliuota guma - Krašte deimantiškai išdėstytos atramos profiliams laikyti išilgai - Aukščio reguliavimas 900–1 100 mm

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Parduodame 2 vnt. Ruchser profilio transportavimo vežimėlių. 12 skyrių, kiekvieno plotis 90 mm – tačiau plotis yra be ribų reguliuojamas. Plotis: 850 mm, ilgis: 1900 mm. Transportavimo vežimėlio aukštis: 1800 mm. Njdpfx Abey Dfq Asbewf

Būklė: naudotas, rida: 126 000 km, galia: 290 kW (394,29 AG), kuro tipas: hibridas, pavaros tipas: automatinis, pirmoji registracija: 06/2021, kita apžiūra (TÜV): 06/2027, spalva: juodas, sėdimų vietų skaičius: 5, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, visų varančiųjų ratų pavara,

Būklė: geras (naudotas), Gamybos metai: 2010, Medžiagų keltuvas, uždėjimo pagalbinė įranga, montavimo keltuvas, Superlift Contractor, kėlimo įrenginys, konvejeris, juostinis konvejeris, transportavimo juosta – įrenginys leidžia vienam asmeniui uždėti profilius ant tokių įrenginių kaip dvikampės pjovimo staklės, laminavimo įrenginiai, armavimo staklės, padavimo žurnalai, apdirbimo centrai ir pan. - Gamintojas: Ruchser, uždėjimo pagalbinė įranga tipas RU-AH - Keliamoji galia: 30 kg - Kėlimo aukštis: 345 - 1080 mm - Konvejeris: Krups KF30 Nwsdpfx Ajyapglsbbof - Juostos ilgis: 2200 mm - Juostos plotis: 75 mm - Greitis: dažnio reguliavimas 8 - 50 m/min - Matmenys: 2220/1000/H1370 mm - Svoris: 216 kg

Būklė: naujas, Staple length, mm Staple width (Rieker width), mm Impact energy, Nm Painting aid for simultaneous painting of sash and glazing bead frame RU-LH Painting aid for glazing bead frames For processing staples L=50mm Length 700 mm, width 500 mm, adjustable working height from 700 - 1200 mm. At each of the 4 corners of the glazing bead frame, one staple is applied. Positioning is performed diagonally so that the staples protrude approx. 35 mm from the wood. When pressed into the sash frame, a clamping action is achieved. For painting, the glazing bead frame is positioned about 20 mm in front of the sash. After drying and before fitting the sash, the glazing bead frame is pressed flush into the sash and removed again only before glazing. The staples can be manually pulled out afterwards. Stand frame with support table, vertical 85°, angle adjustable. 2 equalizing frames for different glazing bead thicknesses, operated via foot valve. Nwsdpfxexpi Efo Abbof Price on request plus packaging and shipping Optional at extra cost: Staple pack 26 x 50 mm, 4,300 pcs each EUR 77.00 Footage of the painting aid can be found at the end of the adjacent video! (Technical data according to manufacturer – no liability assumed!)

Būklė: naujas, Working length 2750 mm Working height 2500 mm Lift of the worktable 300–1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical worktable with lifting device and turning mechanism. Especially suitable for glazing and double-sided sealing of wooden windows. Equipment: - Support section covered with felt - Infinitely adjustable pneumatic lift, lifting range 300 mm – 1000 mm, based on roller conveyor height - Turning device for double-sided sealing, with roller conveyor, roller length 150 mm - 2 pneumatic clamps for securing the window on the turning device - Version with special turning mechanism for pushing the window set up on the roller conveyor through the unit when the turning device is engaged (closed) Alternative/optional equipment available on request! Pos. 1.0: Art. No.: 100000 RU-SW3-90° vertical worktable for wooden windows with turning device for glazing and double-sided sealing Angle length 1970 mm, opening angle 90°, max. working width 2750 mm, total length 3050 mm, total width 780 mm, positioning height 1600 mm, support surface with felt. One roller on the left OR right as edge protection for elements up to 2500 mm in height. Pneumatic lifting device 300–1000 mm. Set-up area as roller conveyor with steel rollers, roller length and pitch 200 mm. ----- Total price in this version: on request! ----- Options at additional cost: Pos. 1.1: Art. No.: 5202 EUR 744.00/each Support section with rubber rollers, Njdpfx Absxmk D Robjwf Ø 48 mm, roller spacing 50 mm, for RU-SW3-90° and RU-SWS3 Pos. 1.2: Art. No.: 7081 EUR 424.00/each Steel angle covered with felt, mounted above the roller bars for RU-SW3-90° These prevent the windows from 'rattling' when being pushed. The additional strips are mounted above all roller bars of the RU-S2. Pos. 1.3: Art. No.: 5056 EUR 129.00/each RU-AK-6 storage box 1000x120 mm, 6 compartments, for hanging in the roller conveyor ----- Total price in this version: on request! Ex works plus packaging and shipping, plus statutory VAT. PDF brochure attached. (Technical specifications according to manufacturer – subject to change!)

Būklė: naudotas, Dimensions (L, W), mm Weight approx. 90 kg Height adjustable (yes/no): yes Lift height: 300 - 800 mm Worktable surface: 1,700 x 1,500 mm Maximum table width: 3,800 mm Payload approx. 130 kg Ruchser RU-4-SSP Rotating and Tilting Table ----- Support surface: 1700 x 1500 mm, maximum table width when swung out: 3800 mm, pneumatically tiltable, mitre cut-out, equipped with 6 storage boxes each with 2 compartments, lower pull-out extensions for widening, with 2 support legs and 2 flat clamping cylinders, lifting device from 300 - 800 mm, roller conveyor as base, foldable. Payload capacity 130 kg. Mobility unit with 4 swivel castors with locking mechanism (RU-4SSP) 2 stops for final inspection and sealing Sash assembly fixture with tool tray and adjustable stop for angling for RU-4-SSP Holder for drill, screwdriver gun, etc. with tool holster Mobility unit with flange rollers RU-DKFA and RU-4SSP 3 double-metre running rails for mobility unit 25 x 10 mm ----- Price of the above-mentioned machine on request! Nwedpfx Abovu Hfdebsf Plus packaging and shipping ----- (technical data as per manufacturer’s information - subject to confirmation!)

Būklė: naujas, Dimensions (L x W) 1400 x 1750 mm Weight, kg Tiltable yes/no: yes RUCHSER Assembly Tilting Table RU-MKS 1.4 ----- Universally applicable work table, e.g. for frame assembly, roller shutter box assembly, glazing bar installation, sash fitting, glazing Equipment, alternative/optional features available on request! Pos. 1.0: Item No.: 8820000 RU-MKS-1.4 Assembly Tilting Table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one fixed to the upper extension, covered with felt. Support surface with width and height/depth extension. Pneumatic tilting function, load capacity 130 kg. Activation via foot pedal. Roller conveyor manually foldable and extendable sideways from 1400-2500 mm, roller length 140 mm (closed). Conveyor height in vertical table position adjustable from 300-380 mm, working height horizontal adjustable from 920-970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Item No.: 5582 Pneumatic swivel device for the roller conveyor for MKS Pos. 1.2: Item No.: 21127 Support bar 1400 mm, non-extendable for RU-MKS Pos. 1.3: Item No.: 5585 360° rotating device with pneumatic locking at 180° increments Rotation brake operable from both sides When using the rotating device, the minimum roller conveyor height of the MKS table increases to 330 mm Pos. 1.4: Item No.: 6455-01 6 storage bins with 2 compartments each, mountable on pivots; for RU-MKS Pos. 1.5: Item No.: 5597-10 Travel gear for semi-circular guide rails for RU-MKS-P4 Operation via foot pedal, mounted on roller conveyor side. Pos. 1.6: Item No.: 6354-6 3 double-meter semi-circular guide rails 30 x 10 mm. Pos. 1.7: Item No.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, retractable mounted on support bar, felt-lined at contact surface, installation left or right, please specify. Pos. 1.8: Item No.: 5584 Lifting device 450 mm for working on vertically standing elements. Activated via foot pedal. Maximum load capacity 200 kg for RU-MKS...-1.4 and 140 kg for RU-MKS...-2. Pos. 99.1 Packaging on pallet ----- Total price in this configuration: on request! Nwedpfxjx H Al Ae Abbef Video and PDF brochure attached. (Technical data as specified by manufacturer - subject to change or error!)

Gamybos metai: 2013, būklė: naudotas, Įrenginys leidžia vienam asmeniui uždėti profilius ant tokių įrenginių kaip dvigubų kampų pjūklai, laminavimo įrenginiai, armavimo staklės, padavimo sandėliai, apdirbimo centrai ir pan. Nsdpfsxykvgsx Abbowf

Būklė: naudotas, Gamybos metai: 2013, Stalas pasukamas, ištraukiamas ir pakreipiamas Pagrindiniai matmenys: 2000 x 1750 mm Maksimaliai ištraukti matmenys: 4500 x 2500 mm Maksimali naudingoji apkrova pakreipus: 250 kg Maksimali naudingoji apkrova keliant: 370 kg Techninė perdavimo volų įranga: Galinė sistema sudaryta iš 2 guminių volų juostų, esančių 400 ir 1700 mm aukštyje nuo pastatymo paviršiaus, modeliuose RU-RGAT...Ü durų linijoms. Volų juostos tvirtinamos 120 mm atstumu nuo stovo. Įvažiavimo versija su automatiškai nusilenkiančia prispaudimo dalimi įvažiuojant su stalu. Įrengimo vietoje įrengta riedėjimo juosta iš cinkuotų plieninių volų, volų ilgis 200 mm, padalyta į 2 dalis be tarpo tarp padalijimo, volo diametras 50 mm, atstumas tarp volų 200 mm. Volų juosta priekyje atvira – patogiam montavimo stalo įvažiavimui perduodant elementą. Volų juostos aukštis reguliuojamas nuo 330 iki 380 mm. Riedėjimo vežimėlis su 4 ratais su ratlankiais, iš kurių 2 su fiksatoriumi. Nwodpfx Aey Dcicsbbjf

Būklė: naudotas, rida: 596 200 km, galia: 117 kW (159,08 AG), pirmoji registracija: 05/2008, kuro tipas: dyzelinas, padangos dydis: 205/75 R 17.5, ašių konfigūracija: 4x2, ratų bazė: 4 300 mm, kuras: dyzelinas, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: plienas-oras, bendras ilgis: 7 980 mm, bendras plotis: 2 550 mm, Gamybos metai: 2008, Įranga: ABS, AdBlue, elektrinis langų reguliavimas, galinis keltuvas, oro kondicionavimas, spoileris,

Būklė: naudotas, Tool holder, milling holder, milling tool - Quantity: 5 x SK45 holders - Various designs Nedpfx Aec Innljbbowf - Drill chuck, face mill holder, reduction sleeves, shell end mill, slab milling cutter, spindle tool - Suitable for: tool changer - Sale: only as a complete set - Weight: 14 kg

Būklė: naudotas, Tool holder, milling holder, milling tool Nedec U Ty Hspfx Abbewf - Quantity: 2x SK45 holders - 1x internal holder: Ø 28 mm - 1x external holder: Ø 40 mm - Drill chuck, face milling chuck, reducing sleeves, cutter head, shell end mill, spindle tool - Suitable for: tool changer - Sale: only as a complete set - Weight: 4.5 kg

Būklė: naudotas, Tool holder, milling holder, milling tool Nedpsc U Hgxofx Abbswf - Quantity: 2x adapter holders SK50/SK45 - Quantity: 22x holders SK45 - Various versions - Drill chuck, face mill arbor, reduction sleeves, cutter head, slab milling cutter - Sale: only as a complete lot - Weight: 90.2 kg

Būklė: paruoštas naudoti (naudotas), SEM MT30F4-52 Ferrite Brushed DC Servomotor SN:J13270, used, normal signs of use, 100% functional, scope of delivery as per photos Nwedst S Al Depfx Abbef

Būklė: paruoštas naudoti (naudotas), SEM MT30U4-57 Ferrite Brushed DC Servomotor SN: J2514, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Nwedpfxet Ttkmj Abbjf

Būklė: paruoštas naudoti (naudotas), Siemens SINUMERIK 548 025.9015.04 System 3 valdymo pultas su valdikliu, SN: A1452596, naudotas, geros būklės, 100% veikiantis, pristatymo apimtis pagal nuotraukas. Nsdpfxjx Eu N Ds Abbjwf

Būklė: labai geros būklės (naudotas), Roller conveyors in lengths of 5000 mm and 6000 mm, width 600 mm, with felt or roller surfaces for loading. Multiple units available! Please inquire. Nwodpfsmt D Raox Abbof

Būklė: geras (naudotas), rida: 442 593 km, galia: 331 kW (450,03 AG), pirmoji registracija: 01/2018, kuro tipas: dyzelinas, padangos dydis: 315/70R22,5, ašių konfigūracija: 6x2, ratų bazė: 4 700 mm, kuras: dyzelinas, spalva: kitas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, pavarų skaičius: 12, emisijos klasė: Euro 6, pakaba: oras, bendras ilgis: 10 480 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 920 mm, krovimo vietos ilgis: 7 810 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 750 mm, Gamybos metai: 2018, Įranga: ABS, Bluetooth, autonominis šildytuvas, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, galinis keltuvas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priekabos jungtis, sėdynės šildytuvas, trauki kontrolė,

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Offered for sale is a semi-moist pet treat production equipment set built around a twin-screw extruder, intended for continuous forming, portioning, and cooling of semi-moist products. The line is dismantled and ready for shipment. It was purchased from a supplier and has not been used in production, but the configuration is equivalent to equipment commonly running in active plants for semi-moist treat manufacturing. This setup covers the critical steps that typically define semi-moist product quality and handling: stable solids feeding into extrusion, controlled shaping and cutting, and staged cooling to help stabilize texture and reduce sticking/deformation before packing or further processing. The extruder is twin-screw and has been used to produce up to 150 kg/h depending on recipe and configuration. Product shaping is highly flexible and can be adapted to many formats; it is suitable for dental sticks, hearts, bones, sticks, and strip shapes, as well as other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal / no-grain semi-moist treats as well as vegetarian-type treats, with the understanding that final output characteristics depend on formulation, moisture targets, and process settings. Dry base components are supplied via a volumetric/mass-based dosing feeder that feeds directly into the extruder, supporting steadier extrusion and more consistent product geometry. Downstream portioning is done with a rotating knife cutter equipped with special inserts designed to achieve cleaner cutting on semi-moist products. Cut length can start from ~5 mm and can be extended as required; the final achievable range depends on settings and the cutter head used. The cutter head concept is flexible and can be redesigned or adapted to achieve the desired end result and surface finish for different shapes and recipes. Nsdjycfw Espfx Abbswf After forming and cutting, product is conveyed through an initial cooling section with a fan/ventilator and then through a conveyor cooler for further stabilization. Cooling is based on ambient forced air, cooling performance is managed through conveyor speed (residence time) and airflow. This two-stage approach is typically beneficial for semi-moist items where surface stabilization and handling robustness are important to avoid clumping, deformation, or marking during transport. A key differentiator of this set is the mixing head attachment at the end of the extruder, which can support improved mixing/temperature management and enables production of two-colour treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—pumps and tanks for typical liquids such as water, fats/oils, glycerol, and similar process liquids. Importantly, the liquid handling components are stainless steel, consistent with hygienic production expectations.

Būklė: naudotas, mašinos/transporto priemonės numeris: XL9T0N30074415051, ašių konfigūracija: 3 ašys, leistina ašies apkrova (ašis 1): 9 000 kg, leistina ašies apkrova (ašis 2): 9 000 kg, leistina ašies apkrova (ašis 3): 9 000 kg, pirmoji registracija: 12/2010, bendras ilgis: 13 800 mm, bendras plotis: 2 550 mm, ratų bazė: 9 110 mm, spalva: kitas, Gamybos metai: 2010, Įranga: ABS,