Ona-Pres Ebd-100- 4,5-Ab pirkti naudotą (55 002)

Būklė: naudotas, Gamybos metai: 1992, Gamintojas: ONA-PRES, tipas: EBd-100-4,5-AB, pagaminimo metai: 1992, serijos Nr.: P-01125, maks. spaudimo jėga: 1.000 t, stalo dydis: 4.500 x 2.700 mm, slankiklio eigos ilgis: 1.400 mm, montavimo aukštis: 800 - 2.200 mm, stalas su tempimo pagalve: 60 - 250 t, tempimo pagalvės eiga: 300 mm, slankiklio pagalvės eiga: 200 mm, presavimo valdymas, papildomas slankiklio valdiklis, 5 dalių spintų sistema su priedais +++ Dėmesio: mašina dalyvauja internetiniame aukcione! +++ Hedpfsx R Dx Ejx Af Usl

Būklė: geras (naudotas), Gamybos metai: 2008, veikimo valandos: 24 629 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 650 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 900 kg, bendras svoris: 24 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 1 350 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 10 000 mm, Good day, Hedpfx Aoymmmpef Uel We hereby offer you, without obligation, a used baling press manufactured by Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s manual and brochures, for which we cannot guarantee accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific press force: 81 N/cm² Pre-press flap force: 50 t Charge box dimensions: 1,650 x 1,100 mm Filling volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only, after disassembly): approx. 25 t Note: The machine has been used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced in July 2026 with a new, larger press. Until then, the machine can be inspected in operation with material input. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 28 748 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, galia: 37 kW (50,31 AG), tūrio srautas: 350 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Hedpfx Afsvn Tg Ij Uel Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2024, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press ram force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed chute dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Operator panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press only): approx. 16 t Condition of the baler: The machine underwent partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is now available for immediate sale. The following refurbishments were carried out: General work: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel openings welded and smoothed Hydraulic unit: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil and air filters replaced - Leaking oil sight glass on the hydraulic tank replaced - All hydraulic hoses replaced Electrical system: - Program menu language set to English - Two key switches on the operator panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Wirthulator electrics renewed, connected, and tested Press ram: Hedsu Thhrepfx Af Uol - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled (cylinder tube honed, complete seal kit replaced), leak test performed - All wear-resistant plastic blocks on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled (cylinder tubes honed, complete seal kits replaced), leak test performed - Scraper flap on the pre-press replaced Tying unit: - Two complete needles with wire guide pulleys replaced - Needles adjusted and set - All wire guide pulleys in needle heads replaced - Twisting fingers replaced - Two twister shafts replaced - All eight wear plates on the twister unit, under the twisting fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is complete and available. Inspection by appointment possible. We do not accept liability for the technical data or possible errors.

Būklė: naujas, Gamybos metai: 2024, Attention – Special offer!! First warranty inspection completely free of charge: Special offer only for customers who participated in a demonstration before purchase – at the Otinus machine showroom in Bydgoszcz. Some of our machines are available FROM STOCK. Hydraulic press brake “PBO-4124-PRO DA-66T” Technical specifications - Nominal pressing force: 2,400 kN - Motor power: 22 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 100 mm/s - Weight: 14,000 kg - Oil reservoir: 210 l - Maximum length of bent sheet: 4,100 mm - Distance between uprights: 4,100 mm - Working beam length: 3,550 mm - Table height: 1,610 mm - Maximum opening height: 530 mm - Maximum stroke of the moving beam: 260 mm - Table width: 90 mm - Throat depth: 410 mm Hsdpfevwmkfjx Af Ujl Tools - Automatic, servo-driven backgauge on linear guides: 2 pcs - Front supports: 2 pcs - Backgauge position adjustment (X-axis): electric motor - Beam adjustment (Y-axis): independent control of axes Y1 and Y2 via servo drives - Punch clamping type: quick AMADA-type clamping system Controller “Delem DA-66T” - Graphical programming module with 2D and 3D touchscreen - 3D visualization for simulation and editing - High-resolution 17-inch color TFT screen - Complete Windows-based operating system - Compatible with “Delem Modusys” system (modular scalability and adaptability) - External USB port - Comprehensive user support in a multitasking environment - Bending using sensors, including a parameter correction menu - Offline Profile-T3D software High-quality components - German brand Rexroth hydraulic valve - Electrical system components from Schneider - Safety circuit elements from Omron and Schneider Specialist assistance We ensure we maintain regular contact with our customers. For this reason, each machine sold includes a service hours package for the assistance of an Otinus specialist. As part of the service, our technician can: - Define bending steps for complex workpieces, - Advise on material and tool selection - Assist in selecting operating parameters for various materials. Transport We offer free loading of purchased machines and support with transport arrangements. The following services are included in the machine price: A 3-day training and machine installation - First day up to 8 hours: Installation and training for the control unit. - Second day up to 8 hours: Independent operation of the machine under supervision of our technician → Possibility to program specific parts as required by the customer. Telephone consultation with an Otinus specialist From 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package (to be used within 12 months) Terms of cooperation - 24-month warranty period. - The machine is brand-new. - Warranty and post-warranty service from the seller. - The customer is responsible for the machine once it is unloaded and moved on their company premises.

Būklė: naujas, Gamybos metai: 2024, Many of our machines are available from stock. Call us to find out more! The offer refers to the standard version of the machine. All optional equipment and their prices can be found on our website. Hydraulic Press Brake PBO-3117-CNC Delem DA-69T Technical Specifications: - Rated pressing force: 1750 kN - Maximum bending length: 3100 mm - Throat depth (distance between tooling and rear frame): 510 mm - Maximum stroke of bending beam: 410 mm - Maximum open height: 615 mm - Distance between frames: 2600 mm - Maximum backgauge distance: 600 mm - Motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10,300 kg Tooling/Accessories: - Automatic backgauges on linear guides, servo-driven: 2 pcs - Front support arms: 2 pcs - Backgauge distance adjustment (X-axis): Servo drive - Beam adjustment (Y-axis): Independent servo-driven Y1 and Y2 axes control - Punch clamping system: Amada-type quick-release Delem DA-69T Control - Touchscreen for 2D and 3D graphic programming - 3D visualization for simulation and process control - High-resolution 17-inch TFT color display - Full Windows operating system - Compatibility with Delem Modusys system (modular scalability and adaptability) - External USB port - Comprehensive user support in a multitasking environment - Bending support with sensors in the parameter setup menu - Offline Profile-T3D software Professional Support We ensure that we stay in constant contact with our customers. That’s why, when purchasing a machine, we include a support hours package from Otinus technical specialists. Come and test our machines Take part in a professional demonstration led by a qualified Otinus technician, covering the complete functionality of the machine. You are welcome to bring your own technical drawings and sample materials. Hedjrp Dwaopfx Af Uol Manufactured in Turkey Machine delivery includes: A 2-day operator training and commissioning session - Day 1 (up to 8 hours): Commissioning and control system training. - Day 2 (up to 8 hours): Independent operation under supervision of our technician – with the option to program specific components. Telephone support by a specialist - From 7:30 to 21:00 (Mon–Sat) – An 8-hour package to be used within 12 months. Free rental of transport rollers and two hydraulic jacks to facilitate machine positioning at the customer’s site. Rollers and jacks are delivered upon prior request (minimum 7 days before machine delivery). Terms of cooperation: - 24-month warranty period - Delivery time: approx. 1–2 weeks; does not apply if the machine is marked as available from stock - The machine is brand new - Seller-provided warranty and post-warranty service - The customer is responsible for the machine during unloading and on-site transport.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Hodpfsvwlqqex Af Usl Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Hjdsvgrh Uspfx Af Uol Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Hodpfov T I Evjx Af Uel Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: naujas, Pressure: 100 Bending length: 3020 mm Frame gap: 2555 mm Installation height: 530 mm Stroke (max.): 300 mm Throat depth: 450 mm Dimensions (LxWxH): 3725 x 2260 x 2780 mm Approx. weight: 8,550 kg 4 CNC axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphical control) CNC crowning via control: Yes, via CNC control Esa S630 (2D graphical control) Motor power: 11 kW Technical specifications XL 30100 Unit | Value -----|----- Bending length | 3020 mm Bending force | 100 t Approach speed | 160 mm/s Bending speed | 10 mm/s Return speed | 150 mm/s Stroke (max.) | 300 mm Throat depth (D) | 530 mm Installation height / daylight (E) | 450 mm Frame gap (B) | 2555 mm Machine length (L) | 3725 mm Machine width (W) | 2260 mm Width w/o front gauge (Y) | 1690 mm Maximum height | 2780 mm Main motor | 11 kW Oil tank capacity | 190 l Machine weight | 8,700 kg The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile application capabilities. The Europa XL features an exceptionally large installation height and, as a result, a long stroke (cylinder travel). The throat depth is also above average, ensuring maximum operational flexibility. We focus on quality, which is reflected in the machine control system as well. As standard, we provide the high-grade Esa S640 (2D graphical control). In addition, the KKI Europa XL press brake is equipped with Y1, Y2, X, and R CNC axes controlled via the Esa S640 system. Of course, CNC crowning control via Esa S640 (2D graphical control) is also included. We make no compromises on upper tools and dies either, fitting the KKI EUROPA XL CNC press brake with premium tooling from EUROSTAMP Italy. Naturally, a machine is only as good as its service. That’s why we prioritize highly qualified staff with extensive experience in CNC sheet metal processing. • CNC axes: Y1, Y2, X, and R • Esa S640 (2D graphical control) • Backgauge with double linear guide and ball screw • Motorized crowning device with CNC control • 2 front support arms, heavy-duty version, height-adjustable via handwheel; from 175 t and up, heavy-duty version on linear guides • Laser safety device on the upper beam Hodpfxjd En Rxe Af Uel • CE safety equipment • Various options available Other available controls: - ESA 640 2D 15'' touchscreen control: €4,520 incl. - ESA 675 W 3D 21'' touchscreen control (Windows-based): €6,485 - DELEM 66 T 2D 17'' touchscreen control (Windows-based): €10,165 - DELEM 69 T 3D 17'' touchscreen control (Windows-based): €16,350 KK-Industries GmbH There’s something for everyone!

Būklė: naujas, Pressure: 100 Bending length: 2600 mm Frame width: 2150 mm Installation height: 530 mm Stroke length (max.): 300 mm Frame depth: 450 mm Dimensions (LxWxH): 3320x2260x2780 mm Approx. weight: 7900 kg 4 axes (Y1, Y2, X, R): Yes, all axes via Esa S630 (2D graphic control) CNC crowning via controller: Yes, via Esa S630 (2D graphic control) Motor power: 11 kW Technical Specifications XL 26100 Unit: - Bending length: 2600 mm Bending force: 100 t Lowering speed: 160 mm/s Bending speed: 10 mm/s Return speed: 150 mm/s Stroke: 300 mm Throat depth (D): 530 mm Installation / clearance height (E): 450 mm Frame gap (B): 2150 mm Machine length (L): 3320 mm Machine width (W): 2260 mm Width without front stop (Y): 1710 mm Max. height: 2780 mm Main motor: 11 kW Oil tank capacity: 190 l Machine weight: 7700 kg Hsdsd En Ryepfx Af Uol Model: KKI EUROPA XL The robust EUROPA XL press brake is characterized by its high precision, accuracy, and versatile range of applications. The EUROPA XL offers a very large installation height resulting in a long stroke (cylinder travel). It also features an above-average throat depth for maximum flexibility. We focus on quality, which is also reflected in the control system. Our standard control is the high-quality ESA S640 (2D graphic control). Furthermore, the KKI EUROPA XL press brake is equipped with CNC axes Y1, Y2, X, and R via the controller. Of course, the CNC crowning control ESA S640 (2D graphic control) is also included. We also make no compromises when it comes to the upper tool and die, equipping the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Naturally, every machine is only as good as its service. That’s why we focus on highly qualified staff with many years of experience in CNC sheet metal processing. CNC axes Y1, Y2, X, and R axis ESA S640 (2D graphic control) Back gauge with dual linear guides and ball screw drive Motorized crowning with CNC control 2 heavy-duty front support arms, height adjustable by handwheel (from 175 t heavy-duty type with linear guides) Laser safety device on upper beam CE safety equipment Various options available Additional controllers: ESA 640 2D 15'' touchscreen control – €4,520 incl. ESA 675 W 3D 21'' touchscreen control (Windows-based) – €6,485 DELEM 66 T 2D 17'' touchscreen control (Windows-based) – €10,165 DELEM 69 T 3D 17'' touchscreen control (Windows-based) – €16,350 KK-Industries GmbH There’s something for everyone!

Būklė: naudotas, Gamybos metai: 2003, Naudota mašina Pagaminimo metai: 2003 Hodoy Ih Ryepfx Af Uol Įranga ir techniniai duomenys: lanksti, pneumatinė presas su labai trumpu perstatymo laiku presą sudaro tvirtas presavimo rėmas, lengvai judantis presavimo vežimėlis ir horizontalios bei vertikalios presavimo žnyplės visi valdymo elementai lengvai pasiekiami MPH 100 presavimo metu pasiekia vežimėlio užspaudimą – panašiai kaip su spaustuvu su 3 vertikaliomis presavimo žnyplėmis su 2 horizontaliomis presavimo žnyplėmis korpuso ilgis: 380 – 2500 mm korpuso gylis maks. 600 mm korpuso aukštis: 350 – 1200 mm presavimo jėga: 3,6 kN / presavimo žnyplė Darbo aukštis: 600 mm Svoris: 1,1 t Darbinis slėgis: 6 bar Prieinamumas: greitai Sandėliavimo vieta: 63934 Röllbach

Būklė: naudotas, Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, aukščio reguliavimo tipas: mechaninis, bendras svoris: 450 kg, – Italian production – Year of manufacture: 2016 – Pre-milling – Technical documentation (DTR), CE compliant TECHNICAL SPECIFICATIONS: – Edge thickness: 0.5 - 3 mm – Solid wood strips: 0.5 - 5 mm – Workpiece height: 8 - 50 mm – Minimum edgebanding length: 160 mm – Minimum panel width: 110 mm – Feed speed: 7 m/min – Pre-milling unit Hjdpowb Ha Tofx Af Uel – Radius cutters – Edge trimming – Radius scraper – Flat scraper – Air blower for each aggregate – Operating pressure: 8 bar – Working length of the machine: 2030 mm – Transport dimensions (L/W/H): 330 / 80 / 125 cm – Weight: 450 kg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Elektrohidraulinė presas OMCN Mod. 164 RM Hjdpfx Aoy E Hk Tof Ujl Judantis stūmoklis Atstumas tarp kolonų: 1000 mm Galia: 100 tonų

Būklė: geras (naudotas), Gamybos metai: 1978, Hidraulinė presas, dviejų kolonų presas, alyvos hidraulinė presas, greitaeigė presas, greitaeigė hidraulinė presas - Gamintojas: Hans Schoen, Hidraulinės presas tipas SH 100 - Prispaudimo jėga: 100 t - Variklis: 11 kW - Tvirtinimo stalas: 580 x 440 mm / Gręžinys Ø 150 mm - Didžiausias įdėjimo aukštis: 435 mm - Atstumas iki centro: 650 mm - Didžiausias eiga: 150 mm - Tvirtinimo vieta: Ø 50 mm Hsdpoyzd I Uofx Af Uel - Matmenys: 1640/1300/H2650 mm - Svoris: 4440 kg

Būklė: naudotas, Gamybos metai: 1967, bendras ilgis: 2 000 mm, bendras plotis: 1 750 mm, bendras aukštis: 2 850 mm, Savaiminis svoris: 6.000 kg - Pagaminimo metai: 1967 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Serijos numeris: 1166 - Valdymas: Konvencinis - Preso modelis: C rėmo presas Hjdpjx N Sxdsfx Af Ujl - Presavimo jėga [tonos]: 100 - Maks. eiga [mm]: 250 - Stalo ilgis [mm]: 740 - Stalo plotis [mm]: 500 - Stūmoklio ilgis [mm]: 250 - Atstumas iki rėmo [mm]: 350 - Transportavimo matmenys: 2000mm x 1750mm x 2850mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 6000kg - Transportavimo paketai [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir senos įrangos priėmimas galimi bet kuriuo metu visiems pramonės produktams Lukas van Rossum

Būklė: naudotas, Gamybos metai: 1981, bendras ilgis: 1 100 mm, bendras plotis: 1 800 mm, bendras aukštis: 2 850 mm, Svoris be krovinio: 6 000 kg - Pagaminimo metai: 1981 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 10340 - Valdymas: Konvencinis - Preso modelis: C-rėmo presas - Presavimo jėga [tonomis]: 100 - Didžiausias eiga [mm]: 160 - Stalo ilgis [mm]: 630 - Stalo plotis [mm]: 550 Hodpfsxywkqsx Af Uol - Stūmoklio ilgis [mm]: 1100 - Transportavimo matmenys: 1100 mm x 1800 mm x 2850 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 6 000 kg - Transportavimo paketų skaičius [vnt.]: 2 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas juridiniams asmenims Pristatymas ir keitimas galimi bet kuriuo metu už bet kokią pramoninę įrangą Lukas van Rossum

Būklė: naudotas, Gamybos metai: 2012, bendras plotis: 1 380 mm, bendras aukštis: 1 710 mm, bendras ilgis: 2 100 mm, Tai komplektas, sudarytas iš briketų presavimo įrenginio su ištraukimu. Ištraukimo galingumas: 5.800 m³/h - Pagaminimo metai: 2012 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Transportavimo matmenys: 2100mm x 1380mm x 1710mm (ilgis x plotis x aukštis) - Transporto pakuočių skaičius [vnt.]: 1 Finansinė informacija Hsdpfxsxr Dz Ts Af Ujl PVM: nurodyta kaina be PVM PVM/ar taikomas maržos apmokestinimas: PVM atskaitomas juridiniams asmenims Pristatymas ir įrangos keitimas galimi bet kada visiems pramoniniams įrenginiams. Glenn Smeets

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 26.04.21, Funkcionalumas: visiškai funkcionalus, Fresan FP 100P - C-Frame Eccentric Press - 100 Tons (1000 kN) TECHNICAL DETAILS: * Capacity: 100 tons (1000 kN) * Strokes per minute: 60 SPM (adjustable) Hodjnxh T Rspfx Af Ujl * Table to slide distance: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD FEATURES: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed, oil-lubricated helical gear drive * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-point slide guidance with waste oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate via AC inverter * Motorized slide adjustment * Mechanical overload protection (Hydraulic safeguard can be retrofitted to a standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & waste oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-engineered machine

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, mašinos/transporto priemonės numeris: DHD/250/100, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, spaudimo jėga: 250 t, eigos ilgis: 600 mm, darbinis greitis: 170 mm/s, atbulinės eigos greitis: 250 mm/s, stalo plotis: 1 200 mm, stalo ilgis: 1 000 mm, stūmoklio plokštės plotis: 1 200 mm, ramplokštės ilgis: 1 000 mm, bendras ilgis: 2 000 mm, bendras plotis: 2 700 mm, bendras aukštis: 4 500 mm, valdymo spintos aukštis: 1 800 mm, valdymo spintos ilgis: 800 mm, valdymo spintos plotis: 500 mm, štampavimo pagalvėlės jėga: 100 t, štampo pagalvėlės eiga: 200 mm, elektrinė saugiklis: 63 A, įrengimo aukštis: 900 mm, slėgis: 235 juosta, Exhibition machine EuroBLECH 2024 – Location: Hamburg. Hsdpfxsttriaj Af Usl

Būklė: naujas, Gamybos metai: 2026, galia: 15 kW (20,39 AG), spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 650 mm, stalo ilgis: 850 mm, gerklės gylis: 300 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hsdpfoyzb Dyjx Af Uol Hydraulic presses are industrial machines that offer high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 100 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for heavy-duty production applications, featuring high tonnage capacity, robust frame construction, and precise operational capabilities. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance cost Applications - Metal forming - Deep drawing and stamping operations - Cutting and punching operations - Assembly and pressing operations - Automotive and ancillary industries Standard Features - Stress-relieved steel frame construction by vibration method - PLC control with touch panel - Argon welding applications - Welding certified to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and squareness in accordance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 100 - Press Force: 100 Ton - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 650 x 850 mm - Press Depth: 1300 mm - Press Width: 650 mm - Table Height from Floor: 900 mm - Total Height: 2700 mm - Main Cylinder Diameter: Ø220 mm - Motor Power: 15 kW - Weight: 8500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 76 085 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 196531, spaudimo jėga: 500 kN, varžto skersmuo: 25 mm, tarpas tarp stulpų: 320 mm, darbinio tūrio: 49 cm³, įpurškimo slėgis: 2 240 juosta, injekcijos svoris: 45 g, formos aukštis (min.): 200 mm, išstūmimo eiga: 125 mm, atvērimo eiga: 350 mm, bendras svoris: 2 300 kg, šildymo galia: 4,9 kW (6,66 AG), siurblio galia: 15 W, galia: 19,9 kW (27,06 AG), Gamybos metai: 2004 Uždarymo jėga: 50 tonų Atstumas tarp kolonų: 320 x 320 mm Sraigto skersmuo: 25 mm Įpurškimo tūris: 49 ccm Įpurškimo svoris: 45 g PS Įranga: 2 x šerdies traukiklis, valdymo sąsaja, sąsajos karštiems kanalams Po pilnos patikros! Hedpfxjx Rq Rne Af Uol

Būklė: naudotas, Gamybos metai: 1990, Siūlome gerai išsilaikiusią ekscentrinę presą iš Gütersloh sandėlio. Spaudimo jėga: 100 t Išsikišimas: 330 mm Eigos reguliavimas: 10–130 mm Eigos dažnis: 56 eigų/min Stūmoklio reguliavimas: 80 mm Stalo matmenys: 830×600 mm Stūmoklio paviršius: 250×130 mm Stalo aukštis: 870 mm Ašies skylė stūmoklyje: 50 mm Staklių svoris: apie 11 t Hsdpoyglzfjfx Af Ujl Reikalinga erdvė (PxGxA): apie 2100×1900×3000 mm

Būklė: naudotas, 50 vnt. Jungheinrich MPE iš anksto sumontuoti rėmai 600 x 100 cm, naudoti 🧰 Produkto ypatybės • Gamintojas: Jungheinrich • Spalva: cinkuota • Būklė: naudota • Rėmas: iš anksto sumontuotas 600 x 100 cm • Rėmo plotis: 10 cm Hsdpfoymlqaex Af Uel • Lauko apkrova: 12.000 kg 💰 Kaina už rėmą: 110 € be PVM • Kiekio nuolaida: pagal užklausą • Pristatymo kaina: visoje Europoje pagal užklausą • Pristatymo laikas: pristatymas iš karto • Apžiūra ir atsiėmimas: galimi bet kada pagal susitarimą Nuolat sandėlyje daugiau kaip 5000 bėginių metrų paletinių stelažų iš įvairių gamintojų (Pasikeitimai ir klaidos techniniuose duomenyse, aprašymuose ir kainose bei tarpiniuose pardavimuose galimi! Žiūrėkite mūsų bendrąsias sąlygas, visos kainos be PVM, EXW sandėlio.)

Gamybos metai: 2009, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: P251001170, Pilna ABS/PP baldų briaunų ekstruzijos linija, žinomas prekės ženklas AMUT Linija puikios techninės būklės, nuolat prižiūrima ir šiuo metu eksploatuojama. Pridedamas atsarginis sraigtas, kuris papildomai padidina eksploatacinę vertę. Linijos komplektacija: 1. Ekstruderis AMUT EA 100 2. AMUT kalandravimo stotis su ritininiu transporteriu CLV 1200 3. Briaunavimo mašina AMUT TRK 100 4. Briaunų vyniotuvė AMUT 5. Kalandrų aušinimo įrenginys su pilnu žarnų komplektu 6. Elektriniai valdymo skydai visos linijos valdymui Hsdpfx Afoxiu Nps Uel Medžiaga: ABS, PP (pirminė + perdirbta) Darbinis plotis: 700 mm (nupjovus kraštus) Nominalus plotis: 1000 mm Storio intervalas: 0,5–2 mm Ekstruderis: vieno sraigto AMUT EA100 33D Ekstruderio našumas: ABS: 320 kg/val. PP: 350 kg/val. Galutinis produktas: 2 ritiniai, kiekvienas 350 mm pločio Linijos greitis: iki 25 m/min Pagaminimo metai: 2009 Techninė būklė: ideali, komplekte atsarginis sraigtas.