Mütek Systemtechnik Mpp 60 pirkti naudotą (22 200)

Būklė: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Ledpfjgl Nlmex Alroad Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Lajdpfsv Rpxlox Alred Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h Laodogfm Ryjpfx Alrsd *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Ljdpfx Aoffh Atolread Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Overall plant footprint: Laodpfxed Su Hxs Alrjd 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Lajderb D Nopfx Alrjd Fan 2.2 kW Airflow 1850 m³/h / 400 V

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Laodpschuvrofx Alrsd Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) Lsdpodwktkefx Alroad - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: - Double blade row + €1,990 net (28 instead of 14) Lodpjgmfa Aofx Alread - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: - Mineral contaminants such as sand, stones, etc., cause increased wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 8 h, Dar viena mašina – iškart prieinama! Labai tvirta mašina su didele spaudimo galia – tinkama gaminti net ir parduodamos kokybės briketus (priklausomai nuo žaliavos). Didelės apimties spaudimo cilindras ir 80 mm briketai tai leidžia. Mūsų perkamiausia briketavimo presų serija: + Patikrinta, paprasta technologija, užtikrinanti itin mažą gedimų tikimybę + 25 metų patirtis, nuolatinis tobulinimas ir žinios + Tūkstančiai naudojamų mašinų patenkintiems klientams + Puikus kainos ir kokybės santykis Papildoma kaina už aušinimo įrenginį: +4 995 € (be PVM), (galima sumontuoti ir vėliau) * Aušina presavimo žnyples ir hidraulinę alyvą (rekomenduojama, jei presas veikia ilgiau nei apie 3,5 valandos be pertraukos) Briketo skersmuo: 80 mm Priekinė įvorė: 125 mm Didžiausias briketo eiga: 100 mm Optimali briketo eiga: 80 mm Našumas (priklauso nuo žaliavos): iki 200 kg/val.* *priklauso nuo birumo tankio *skaičiuota pagal 200 kg/kub.m birumo tankį Variklio galia: 9,2 kW 400 V / 50 Hz / 3 fazės Ilgis: 2095 mm Plotis: 1600 mm Aukštis: 1700 mm Svoris: 1250 kg Alyvos kiekis: 220 l Siloso skersmuo: 1200 mm Lajdpfx Aoxfwdelrsd Siloso talpa: apie 1 m³ Siurblys: 75 l Hidraulinis išankstinis suslėgėjas Presavimo žnyplių aušinimas: taip, su papildoma aušinama presavimo žnyple Hidraulinės alyvos aušinimas: taip Presavimo žnyplių ir hidraulinės alyvos aušinimas su aušinimo įrenginiu (papildoma įranga) Pilnumo lygio kontrolės galimybė: taip Ištisinis briketas: taip (priklauso nuo žaliavos) Galimybė didesniam užpildymo slankikliui: taip, su papildoma įranga Atitinka CE reikalavimus Reikalavimai žaliavai: - Drėgmė turi būti nuo 6 iki maks. 15% - Kūdros ilgis ne didesnis kaip 20 mm - Darbo temperatūra: šildoma aplinka, ne mažiau kaip +5°C - Tiekiama žaliava turi būti be metalo ir mineralinių priemaišų, tokių kaip smėlis, akmenys ir pan. Priešingu atveju gali atsirasti presavimo įrankių pažeidimų ir/ar padidėti nusidėvėjimas.

Būklė: naujas, Gamybos metai: 2026, Availability upon arrangement Very robust machine with high pressing force - Also suitable for producing saleable briquette quality *depending on material. The large-dimensioned pressing cylinder and 70 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net, (can also be retrofitted later) Lasdpfxsd Nm Sio Alrsd * Cools the press clamp (important for operation over 4 hours) and the hydraulic oil * Cooling unit recommended for continuous operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optimal briquette stroke: 80 mm, Performance (material dependent): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Option to cool press clamp: yes, with special accessory - cooled press clamp Option to cool hydraulic oil: yes Cooling of the press clamp and hydraulic oil with cooling unit (optional accessory) Option for fill level monitoring: yes Option for continuous briquette (log formation): yes (material dependent) Option for enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for raw material: - The moisture content (absolutely dry) must be between at least 6% and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room at minimum +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, * Production time approx. 4–5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Ljdpfxechqxxo Alrsad Briquetting offers the following advantages: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Leded N Dnhspfx Alrjad Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Gamybos metai: 2023, būklė: naujas, Technical Data Briquetting Press: Throughput capacity: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquette diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary paddle probe - Inspection cover Lajdpokuz Tusfx Alrod - Connection for transport pipe for briquetting press - Viewing window in the hopper Requirements for raw material for briquetting: - Moisture content (absolutely dry basis) must be at least 6% up to a maximum of 18% - Maximum chip length: 15 mm - Installation temperature: climate-controlled area with minimum +5°C - The customer is responsible for preventing hydraulic oil leaks - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may occur otherwise The screen size of the shredder should not exceed 10/12 mm.

Būklė: naujas, Gamybos metai: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput highly dependent on screen and input material: - Up to a maximum of 350 kg/h for straw with a 15 mm screen - Up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 Volt (9.2 kW or 15 kW available upon request) Optional: * Surcharge for the next larger machine with an 18.5 kW motor and larger silo diameter: + €2,750 net Robust steel construction Hardened cutting knives Screen with interchangeable inserts Available perforation sizes: (10), 15, 22, 26, 30, 40, or 60 mm With electric drive: star-delta switch, overload protection, and 8 m power cable, ready-to-plug Blow-out nozzle 150 mm Optionally for plastic or grain pipes Blow distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (L x W x H) Weight approx. 240 kg Spare parts and options: Lodozbizopfx Alroad 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Lid: €290 each (net) Polystyrene disc: €600 each (net)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput highly dependent on screen and input material: - up to 60 kg/h when processing EPS with a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW – 400 Volt Robust steel construction, hardened cutting knives, screen with interchangeable inserts, available perforations (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive, supplied with star-delta switch, overload protection, and 8 m power cable, plug-ready. Discharge spout: 150 mm, optionally suitable for plastic or grain pipes, blowing distance approx. 12 m. Chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires. Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Ljdpfjh S H T Usx Alread Weight: approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Gamybos metai: 2020, veikimo valandos: 100 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 300 kg, bendras ilgis: 1 330 mm, bendras plotis: 840 mm, bendras aukštis: 1 870 mm, suslėgto oro jungtis: 6 juosta, įvesties srovės tipas: Oro kondicionierius, Kroviklis padėklų krautuvas Traystapler perstatymo įrenginys Tray-Loader TL-6040 – dviejų takelių padėklų (dėžių) krovimo-nukrovimo modulis ekonomiškam LED plokščių padėklų transportavimui. Tušti padėklai paimami iš transportavimo vežimėlio, automatiškai pozicionuojami ir paruošiami užpildymui. Užpildžius, padėklai automatiškai nukraunami ant antro transportavimo vežimėlio. • Kompaktiška konstrukcija • Mažas užimamas plotas • Krovimo-nukrovimo modulis • Transporto vežimėlis • Standartinio padėklo dydis: 400 x 600 mm • Tvirta suvirinto plieno konstrukcija • I x P x A: 840 x 1.330 x 1.870 mm • Rankinio valdymo aukštis: 930 – 1.050 mm • Suslėgtas oras 0,6 mPa (6 bar), be alyvos, filtruotas, sausas • Vidutinės sąnaudos apie 10 l/min Ledpfxsxuqtbe Alroad • Darbo temperatūra +18°C - +30°C • Svoris apie 300 kg

Būklė: labai geros būklės (naudotas), Parduodamas reduktorius su varikliu SEW-EURODRIVE SF31DT71D-4BM, trifazis variklis, galia 0,37 kW, integruotas elektromagnetinis stabdis, 220 V kintamoji srovė. Įrenginys yra visiškai veikiantis, patikrintas ir paruoštas darbui. Reduktorius su varikliu yra geros techninės ir vizualinės būklės. Matomi normalūs naudojimo pėdsakai, atsiradę eksploatacijos metu. Techniniai duomenys: Gamintojas: SEW-EURODRIVE Tipas: SF31DT71D-4BM Variklio galia: 0,37 kW Lsdpfx Aljznnm Sersad Maitinimas: 3×220Δ / 380Y V, 50 Hz Variklio greitis: 1380 aps./min. Išėjimo greitis: 42 aps./min. Sukimo momentas: 60 Nm Stabdis: 220 V kintamoji srovė Stabdymo momentas: 5 Nm Apsaugos klasė: IP54 Izoliacijos klasė: B Svoris: 16,88 kg Montavimo padėtis: IM V1A Pagaminimo metai: 2002 Pagaminimo šalis: Vokietija

Būklė: labai geros būklės (naudotas), Parduodamas reduktoriaus variklis SEW-Eurodrive WA20/T su trifaziu varikliu DR63M6/BR/TH ir integruotu elektromagnetiniu stabdžiu 24 V DC. Įrenginys yra 100 % veikiantis, patikrintas ir paruoštas naudoti. Prieš pardavimą reduktoriaus variklis buvo kruopščiai patikrintas ir veikia be priekaištų. Ant variklio korpuso matomi pažeisti aušinimo sparnai, kaip parodyta nuotraukose. Pažeidimas yra tik mechaninis ir nedaro įtakos teisingam įrenginio veikimui, jo parametrų ar patikimumui. Be to, reduktoriaus variklis turi įprastus naudojimo ženklus, atsiradusius eksploatacijos metu. Techniniai duomenys: Gamintojas: SEW-Eurodrive Reduktoriaus modelis: WA20/T Variklio tipas: DR63M6/BR/TH Galia: 0,12 kW Maitinimas: 3×230/400 V AC, 50 Hz Variklio sukimosi greitis: 900 aps./min Išėjimo greitis: 15 aps./min Perdavimo santykis: i = 60 Sukimo momentas: 32 Nm Lodpsznaq Njfx Alrjad Elektromagnetinis stabdys: 24 V DC Apsaugos klasė: IP54 Izoliacijos klasė: F Nominali srovė: 1,00 A (230 V Δ) / 0,57 A (400 V Y) Galios koeficientas (cos φ): 0,65 Darbo režimas: S1 Svoris: 9,46 kg

Būklė: labai geros būklės (naudotas), Katalogo numeris 6815 TECHNINIAI DUOMENYS - veleno plotis: 640 mm - peilių skaičius: 4 vnt. - didžiausias apdirbamo elemento storis: 230 mm Iš viršaus: - dantytas įvedimo velenas, tempiantis, sekvencinis - spaustuvai - obliavimo velenas - spaustuvai - lygus išvedimo velenas, tempiantis Iš apačios: - volelis + įvedimo stalas - reguliuojamas velenėlis apatiniame stale - išvedimo stalas + volelis - variklis 5,5 kW - sklandus padavimo greičio reguliavimas - padavimo variklis 0,5 kW - ištraukimo antgalio skersmuo: 150 mm - matmenys (ilgis/plotis/aukštis): 1630x1630x1140 mm - svoris: 920 kg PRIVALUMAI – itališka gamyba – naudotas storio oblius, labai gera būklė Grynasis kaina: 17 900 PLN Grynasis kaina: 4 260 EUR Grynasis kaina apskaičiuota pagal kursą 4,2 PLN/EUR (didelių valiutų svyravimų atveju kaina gali keistis) Lsdpfx Alezkrnrsroad

Būklė: labai geros būklės (naudotas), Katalogo numeris 7303 TECHNINIAI DUOMENYS - veleno plotis: 640 mm - peilių kiekis: 3 vnt - maksimalus apdirbamo elemento storis: 250 mm iš viršaus: - užrakto dantukai - dantytas įtraukiantis velenas, traukiantis - spaudikliai - obliavimo velenas - spaudikliai - lygus ištraukiantis velenas, traukiantis iš apačios: - reguliuojami voleliai apatinėje stalo dalyje 2 vnt Lasdpfx Alezkg Tcered - variklis: 7,5 kW - elektrinis stalo kėlimas - kėlimo variklis: 0,75 kW - 4 padavimo greičiai - padavimo variklis: 1,5 kW - ištraukiamo trišakio skersmuo: 140 mm - matmenys ilgis/plotis/aukštis: 1120x1250x1680 mm - svoris: 1033 kg – Pagaminta Lenkijoje – Naudota storio obliavimo staklė, labai gera būklė Originalios nuotraukos Kaina be PVM: 19900 PLN Kaina be PVM: 4738 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant valiutų svyravimams)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7732 TECHNINIAI DUOMENYS - spaudimo jėga: hidraulinė - briketų forma: apvali - briketo skersmuo: 70 mm - bunkerio skersmuo: 1200 mm - našumas: apie 70 kg/h - automatinis mašinos veikimas - variklis: 7,5 kW - maks. darbinis slėgis: 150 bar - atsiurbimo jungtis: 90 mm - filtro maišo angos skersmuo: 500 mm - maks. maišo aukštis: 900 mm - matmenys (ilgis/plotis/aukštis): 1950x1400x2700 mm - svoris: 1130 kg PRIVALUMAI – itališka gamyba – galima tiesiogiai prijungti prie pjuvenų ištraukimo sistemos Lasdpfx Aljzhvaajrjd – naudota briketavimo mašina – DTR dokumentacija – labai gera būklė Grynoji kaina: 29 900 PLN Grynoji kaina: 7 120 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (two-sided): 200 mm - Max planing height (four-sided): 100 mm Top side: - 2 rubber feed rollers - 2 toothed feed rollers Lodpszact Ejfx Alroad - Metal feed roller - Toothed infeed drive shaft - Pawls - Pressure unit - 2 toothed drive shafts - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Smooth metal feed roller - Pressure unit - Profiling shaft, 7.5 kW - Pressure unit - Rubber feed roller Bottom side: - Planing shaft, spindle diameter 35 mm, shaft length 130 mm, 2.2 kW - 2 guide bars - Infeed table - Smooth drive shaft - 610 mm planing shaft, 4-knife (currently equipped with 2 knives), 7.5 kW - 2 smooth drive shafts - Split metal sliding roller - Side pressure Rear side: - Side spindles with 2 pressure units - 1) Right vertical spindle 95 mm, 4 kW - 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction ports diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight approx. 3500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing logs, flooring, etc. – Additional profiling shaft and planing shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition Net price: 66,900 PLN Net price: 15,930 EUR (based on 4.2 EUR exchange rate) (Prices may vary with exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), KATALOGO NR. 6935 TECHNINIAI DUOMENYS - veleno plotis: 630 mm - peilių kiekis: 4 vnt. - didžiausias apdirbamo elemento storis: 210 mm * iš viršaus: - atbuliniai ratukai - dantytas, traukiantis įvedimo velenas - spaustukai - obliavimo velenas Lodey T Rfwjpfx Alrjad - spaustukai - išvedimo lygus, traukiantis velenas * iš apačios: - reguliuojami volai apatinėje plokštėje, 2 vnt. - variklis: 4,4 kW - 2 padavimo greičiai - matmenys ilgis/plotis/aukštis: 1220x950x1060 mm - svoris: 750 kg PRIVALUMAI – Pagaminta Vokietijoje – naudota storio obliavimo staklė, labai gera būklė Grynoji kaina: 12 900 PLN Grynoji kaina: 3 071 EUR Grynoji kaina apskaičiuota pagal 4,2 PLN/EUR kursą (didesnių valiutų svyravimų atveju kaina gali keistis)

Būklė: labai geros būklės (naudotas), Catalogue number 7640 FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured in Germany by KUPFERMUHLE – Used planer in very good condition TECHNICAL SPECIFICATIONS - Maximum planing width: 610 mm - Maximum planing height: 200 mm - Top section: - Powered infeed shaft, toothed - Pawls - Pressure unit - 2 driven shafts, toothed - Pressure unit - Planing shaft 610 mm, 6 knives, 15 kW - Pressure units Lodpfx Aoy Sny Aolroad - Outfeed shaft, smooth, powered - Bottom section: - Side pressure at infeed - Guide rail - Infeed table - Driven shaft, toothed - Planing shaft 610 mm, 6 knives, 7.5 kW - 2 driven shafts, smooth - Side pressure at outfeed - Rear section: 2 vertical spindles + pressure units: 1) Right vertical 200 mm, 15 kW 2) Left vertical 200 mm, 15 kW - Left vertical spindle electrically adjustable (right/left) - Spindle diameter: 40 mm - Alternately adjustable spindle position - Spindles adjustable up/down, right/left 3) Additional bottom horizontal spindle 160 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal slip rollers, 2 lower driven rubber rollers - Adjustable rollers in bottom table - Electric planing height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed drive motor: 8 kW - Extraction port diameters: 2×120, 2×160 mm - Dimensions (LxWxH): 2980x1980x1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (based on the rate of 4.2 EUR) (Prices may change with higher fluctuations)