Briketavimo presas

MPP 60

Sąlyga: naujas, Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Nwjdpfjgl Nlmox Agijc Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007361, Darbo sritis X ašis: 3050 mm Darbo sritis Y ašis: 850 mm Pagrindinio veleno galia: 9 kW Valdomų ašių skaičius: 3 ašys Gręžimo velenų skaičius: 19 Nsdox A Tibjpfx Agiewc Įrankių vietų skaičius: 3

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Nedpfsd Su Hxox Agiewc Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Overall plant footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, Multitel SMX170 tracked work platform - 16.7 m working height - 200 kg load capacity - 2,200 kg own weight - Year of manufacture 2022 // For further details, please feel free to contact us! Nwedpfxsudvifj Agijc

Sąlyga: naudotas, Chipping rundvirke: 100–150 m³/t Flising av småved og avfall: 50–100 m³/t Vekt: 3165 kg Maks. stokkdiameter: 254 mm Söderhamn Eriksson 670-56 CC flishogger med elektrisk motor. Söderhamn Eriksson 670-56-flishoggeren er beregnet for produksjon av flis til tremasse, fiberplater og sponplater. Både rundvirke og sagbruksavfall kan benyttes som råstoff. Flishogger 670-56 mater horisontalt, i en vinkel på 37,5 grader mot fiberretningen. Flis av jevn og høy kvalitet kan enten ledes ut i bunnen eller blåses rett opp. Bli en av de sagbruksbedriftene som forvalter ressursene sine på en smart måte. Nwedpfx Ashclffsgisc

Sąlyga: naudotas, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressure 2 kg/cm² Heating: 2 x 1.8 kW - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction unit for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine mounted on chassis Installation footprint (according to manufacturer): 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Nwedpjxl Ha Ssfx Agijc Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as seen”. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex stock

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, For sale is a Felder spindle moulder F-700 Z with 4 spindle speeds. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition, including full warranty / guarantee. Technical data: - 4 spindle speeds - Tilting spindle 90° - 45° - Spindle fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor output 5.5 kW / 7.5 hp SD start - Year of manufacture: 2023 / as new Nwjdpfxjwp Ri Uj Agijc The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Contact phone: 03137-3109 Related terms: spindle moulder, milling machine, moulding Reference: R-D1618

Sąlyga: paruoštas naudoti (naudotas), For turning plates, discs, or bowls up to 250 mm Ø. Nodpfx Agorh Hntoiowc Machine with vacuum clamping.

Sąlyga: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Nwedsd H Sc Eopfx Agijc Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Sąlyga: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Nwsdpfscqvhwsx Agiec Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -