Mütek Systemtechnik Mgz-18,5 Kl pirkti naudotą (4 199)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: - Double blade row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net Redpfx Ahogmfa Asmscf (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: - Mineral contaminants such as sand, stones, etc., cause increased wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Rcsdsdwktkspfx Ahmof Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Rcodpfx Aogl Nlmohmjf Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Rcjdpfx Ahov Rpxlomof Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Rcedpfxechuvro Ahmef Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. Rodpfx Ahsgfm Ryjmocf The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Rjdpfx Ajffh Atohmecf Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Pictures to follow Rcedpfxorb D Nj Ahmjf Mobile Jet 160, Connection 160, Fan 2.2 kW Airflow 1850 m³/h / 400 V

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Demonstration machine with approx. 9 operating hours One more machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput capacity We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple turning positions Option of double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% a.d. (absolutely dry basis) Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC controller - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed 70-90 rpm for high throughput - Cycling control to minimize idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform. Optional shredder features at extra cost: - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or material thickness less than 3 mm) - Angled conveyor belt + €8,770 net Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm Rjdpjb Ny Eyjfx Ahmecf - Automatic overband magnet + €5,980 net Alternatively, fixed magnetic block over the conveyor belt for manual cleaning + €990 net (for low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronised with the shredder) Alternatively, manual start and stop of the belts + €595 net Material requirements: - Moisture content (a.d.) must be less than 30% - Installation temperature: heated area with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time: approx. 4–5 months Your advantages: + Extremely large cutting unit opening: 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW start-up power Technical data: Color: grey / blue Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65–125 Power requirement (kW): 37 Rcedpfxogbkkre Ahmjf Screen perforation (mm): 10–40 (selectable) Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions (LxWxH): 2,430 x 2,410 x 1,735 mm Weight (approx. kg): 3,500 Options at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics for increased throughput - Preparation for discharge conveyor - Discharge conveyor - Overband magnet HAWK-EYE *To shred veneer or paper (anything thinner than 3 mm), we recommend a segment floor. Special option, available at extra cost. --- Slider extension option *available at additional cost Maximum pallet size: up to 1200/1400 mm (with slider extension option, the upper cutting unit opening is 1300 x 1700 mm, surcharge: + €14,975) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (oven dry basis) must be below 20% - The feed material must be free from metals and mineral impurities. Tool damage and/or increased wear may otherwise result.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Requirements for input material: - Moisture content (atro) must be below 25% Rcjdpfx Ahjx Af Rdomsf - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: naujas, Gamybos metai: 2026, Ideali mašina minkštos medienos smulkinimui. . Variklis: 11/15 kW; 400 V - 50 Hz - 3 fazės, Rotoriaus skersmuo: 260 mm, hidrauliškai valdomas stūmiklis Kieto sieto angos pagal pageidavimą (12 - 40 mm) Ištraukimo jungtis Ø 160 mm Svoris apie 1.100 kg Išmatavimai (ixpxa) apie 1805 x 1118 x 1650 mm Spalva: mėlyna / pilka Redpewzarcsfx Ahmjcf Reikalavimai žaliavai: - Drėgmės kiekis (absoliutus) turi būti mažesnis kaip 30 % - Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir pan., sukelia padidintą susidėvėjimą. . Maloniai kviečiame atlikti nemokamą bandymą su Jūsų medžiaga. Kviečiame Jus atvykti į Neckartailfingen. Taip pat galima, kad atsiųstumėte savo medžiagą per siuntų tarnybą, o bandymo eigą užfiksuosime nuotraukomis ir vaizdo įrašais.

Būklė: naujas, Gamybos metai: 2025, The ideal machine for shredding both hardwood and softwood. Another unit is now available (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 14+2 pieces, 40x40 mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as required (12–40 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm The following options are available at extra charge: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor on all 4 sides + €2,170 net (prevents the pusher from jamming; recommended for material less than 3 mm thick) Rcjdpfxed E R D Se Ahmof - Shredder raised by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely required; closed, extra sturdy rotor bearing. Worth considering for screens smaller than 15 mm or with a high proportion of fines. Not necessary if the bearings are lubricated with grease approx. every 2 weeks during operation) Raw material requirements: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via freight forwarding, and we will document the test with photos and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced blade projection + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour *(dependent on screen size and material). Significantly higher throughput for smaller wood remnants. Motor: 22 kW; 400 V - 50 Hz - 3 ph Screen: 15/20 mm Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction port Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: System color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown in case of rotor idle - Speed 70-90 rpm for high throughput - Interval control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *As shown in the last 2 images. - Additional blade row + €2,790 - Segmented floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 Rjdpfx Ahsdv Eu Homecf (Consider for plastic shredding with screens smaller than 15 mm or high fines content. Not necessary if greasing the bearings with lubricant every ~4 weeks during operation) - Raise shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €5,980 net - Control unit for conveyor belt and overbelt magnet + €2,750 net (Start and stop synchronized with shredder) - Outward-stretched feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Material feed must be free of metals and mineral impurities. Damage to the tools and/or increased wear may occur as a result

Būklė: naudotas, Smulkinimo mašina MGZ 1330, 37 kW Darbo valandos: 275 Įskaičiuota: - 2-asis peilių eiliškumas - Greita hidraulika didesniam našumui - Paruošta konvejeriniam juostai Pasirenkama: - Konvejerinė juosta su automatiniu metalo separatoriumi Jūsų privalumai: + itin didelė pjovimo agregato anga; viršuje: 1300x1200 mm + specialus rotorius, tinkamas tiek kietmedžiui, tiek minkštmedžiui + energiją taupanti ir galinga su 37 kW paleidimo galia Techniniai duomenys: Pajungimo anga viršuje (mm): 1.300 x 1.200 Piltuvo talpa (m³): 1,6 Rotoriaus skersmuo (mm): 368 Rotoriaus greitis (aps/min): 65–125 Galingumo poreikis (kW): 37 Sieto skylės (mm): pagal susitarimą Įrankiai: 37/70 peilių Ištraukimo antgalio Ø (mm): 200 Matmenys: 2430x2410x1735 mm (ilgis x plotis x aukštis) Svoris (apytiksliai kg): 3.500 Rcodpfx Aox Tfdhshmof --- Reikalavimai žaliavai: - Drėgnumas (atro) turi būti mažesnis nei 20 % - Tiekiama medžiaga turi būti be metalo ir mineralinių priemaišų. Priešingu atveju gali kilti įrankių pažeidimų ir/ar padidėti susidėvėjimas.

Gamybos metai: 2015, būklė: reikia remonto (naudotas), Funkcionalumas: ribota funkcionalumas, bendras ilgis: 13 000 mm, bendras plotis: 4 520 mm, bendras aukštis: 2 550 mm, mašinos/transporto priemonės numeris: 201507-025, VANDENS SRAUTO PJOVIMO IR KLIJAVIMO STOTIS: Įrenginys yra didesnės gamybos linijos dalis, žiūrėkite ir kitus mūsų skelbimus. Pasiūlymo objektu esančiame įrenginyje EPS/XPS žaliavinės plokštės (rankiniu būdu dedamos į atsargų žurnalą) buvo klijuojamos išilgai galinės pusės į vientisą juostą, po to vyko formatavimas su vandens srauto pjovimo įrenginiu, įskaitant išpjovas ir griovelio frezavimą. Išėmimo stotis ir juostinis konvejeris taip pat įtraukti į pasiūlymą. ŽALIAVOS MATMENYS: Ilgis: 1500 mm - 2500 mm Plotis: 600 mm - 1250 mm Aukštis: 20 mm - 50 mm VANDENS SRAUTO PJOVIMO ĮRENGINYS: cut Expert variojet (gamintojas expert international GmbH, anksčiau expert systemtechnik GmbH) INCLUZUOTA: Klijų agregatas (Nordson), frezavimo velenas (Jäger) Redpfjytp U Asx Ahmecf

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 120 kg, bendras ilgis: 900 mm, bendras plotis: 1 500 mm, bendras aukštis: 2 050 mm, įėjimo įtampa: 230 V, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, kartojimo tikslumas: 0,01 mm, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, Įranga: USB jungtis, apšvietimas, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a broad range of marking applications. With its integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, laser technology has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and part numbers can be automatically incremented by the software once previously set. In addition, the software can read data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with a Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side-mounted arms for long workpieces, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic determination of focal distance • Optional: extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp for operating status indication • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system Rcjdpfjyxccrjx Ahmjf • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Connection 230V • Dimensions approx. 900 x 800 x 1900 mm (LxWxH) • Weight approx. 120 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, įėjimo įtampa: 230 V, įėjimo dažnis: 50 Hz, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The LAS 22 is a compact desktop device with a small working area, making it ideal for small parts. Thanks to its minimal footprint, the system is highly practical and can be used anywhere. The device is very easy to operate, even without programming knowledge. Rodpfjwkpxkjx Ahmocf With its powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without requiring advanced programming skills. Serial and article numbers can be automatically incremented by the software after initial setup. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30 Watt fiber laser (optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - EZCAD marking software in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: fume extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - 230V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg

Gamybos metai: 2020, veikimo valandos: 100 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 300 kg, bendras ilgis: 1 330 mm, bendras plotis: 840 mm, bendras aukštis: 1 870 mm, suslėgto oro jungtis: 6 juosta, įvesties srovės tipas: Oro kondicionierius, Kroviklis padėklų krautuvas Traystapler perstatymo įrenginys Tray-Loader TL-6040 – dviejų takelių padėklų (dėžių) krovimo-nukrovimo modulis ekonomiškam LED plokščių padėklų transportavimui. Tušti padėklai paimami iš transportavimo vežimėlio, automatiškai pozicionuojami ir paruošiami užpildymui. Užpildžius, padėklai automatiškai nukraunami ant antro transportavimo vežimėlio. • Kompaktiška konstrukcija • Mažas užimamas plotas • Krovimo-nukrovimo modulis • Transporto vežimėlis Rcedpfxjxuqtbj Ahmef • Standartinio padėklo dydis: 400 x 600 mm • Tvirta suvirinto plieno konstrukcija • I x P x A: 840 x 1.330 x 1.870 mm • Rankinio valdymo aukštis: 930 – 1.050 mm • Suslėgtas oras 0,6 mPa (6 bar), be alyvos, filtruotas, sausas • Vidutinės sąnaudos apie 10 l/min • Darbo temperatūra +18°C - +30°C • Svoris apie 300 kg

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus,

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 900 mm, bendras plotis: 1 550 mm, bendras aukštis: 1 900 mm, įėjimo įtampa: 230 V, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, Lazeris gaminių ženklinimui – „Systemtechnik Hölzer GmbH“ įmonės universalus lazerio ženklinimo sistemos modelis LAS 28 XLe gali būti naudojamas labai plačiam ženklinimo uždavinių spektrui. Dėl integruoto skaidulų lazerio galima ženklinami beveik visos medžiagos, pavyzdžiui, plienas, kietasis lydinys, aliuminis ir plastikas. Atsižvelgiant į reikalavimus, sistema gali būti aprūpinta 20, 30 arba 50 vatų skaidulų lazeriu. Norint užtikrinti patvarų ženklinimą, lazerio naudojimas yra būtinas daugelyje pramonės šakų. Naudojant galingą lazerio programinę įrangą, tekstus, skaičius, 2D kodus, QR kodus ir logotipus galima lengvai sukurti vos keliais paspaudimais, nereikia specialių programavimo žinių. Programinė įranga pati automatiškai numeruoja serijos ir gaminių numerius, kai nustatymai yra atlikti iš anksto. Be to, programinė įranga gali nuskaityti duomenis (kintamą informaciją, pavyzdžiui, brėžinių numerius, projektų pavadinimus ir kt.) iš esamų lentelių ir automatiškai perkelti į iš anksto nustatytas sritis. Taip pat galima naudoti rankinį skaitytuvą. Standartinėje komplektacijoje yra integruotas kompiuteris su „Windows“ operacine sistema ir lazerio programine įranga. Pasirenkamai lazerio modelis LAS 28 XLe gali būti aprūpintas sukamąja ašimi (3 žandikačių tvirtinimas), skirtą cilindrinių detalių ženklinimui. Taip pat galima įdiegti papildomas funkcijas, pavyzdžiui, šoninius laikiklius ilgesnių detalių ženklinimui, reguliuojamą Z ašį, stalčių sistemas ir kt. Pagaminta Vokietijoje. Skaidulų lazeris: 30 W, 20 W arba 50 W. • Lazerio klasė 1 • Bangos ilgis 1064 nm • Ženklinimo lauko dydis 150 x 150 mm (pasirenkamai didesnis) • Ženklinimo programinė įranga EZCAD (vokiečių / anglų kalbomis) • pasirenkama: sukamoji ašis (3 žandikačių tvirtinimas) • pasirenkama: skaitmeninė aukščio matavimo sistema • pasirenkama: ištraukimo sistema (įskaitant aktyvuotojo anglies filtrą) • pasirenkama: automatinio fokusavimo sistema – sistema, skirta automatiškai nustatyti fokusavimo atstumą • Paleidiklis lazeris (paprastas vaizdas, kontūro vaizdas) • Fokusavimo ieškiklis (paprastas fokusavimo nustatymas) • Signalinis švyturėlis, rodantis veikimo būseną • Maksimalus detalės aukštis: apie 300 mm • Elektriniu būdu reguliuojama Z ašis • Integruotas kompiuteris su „Windows“ operacine sistema Rcodpfxeunh H Ss Ahmof • IPS PCAP jutiklinis ekranas ir klaviatūros atrama, reguliuojamo aukščio • Rėmas iš aliuminio profilio • Aušinamas oru • Ypač didelė vidinė erdvė • Durelės: apie 700 mm pločio / apie 400 mm aukščio (perdavimo anga) • Maitinimas 230 V • Matmenys: apie 900 x 800 x 1900 mm (ilgis x plotis x aukštis) • Svoris: apie 120 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, bendras svoris: 150 kg, bendras aukštis: 2 300 mm, bendras ilgis: 1 200 mm, bendras plotis: 600 mm, valdiklio modelis: SPS-Steuerung, darbinis plotis: 300 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, suslėgto oro jungtis: 6 juosta, apkrova vienai atramai: 50 kg, stalčių skaičius: 1, pozicionavimo tikslumas: 1 mm, darbinio aukščio: 30 mm, darbinis ilgis: 400 mm, darbo diapazonas: 400 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, Feeding and storage system for light articles in goods carriers. Tray feeding for magazine loading in automated production. Specifically designed for components sensitive to surfaces or contours. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4–8 seconds) • Tray weight including workpieces max. 5 kg • Tray stacker weight max. 50 kg • Positioning accuracy ± 1 mm Rcedpfxsyx Hgbo Ahmsf • PLC control with operator and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication preparation – Siemens IWLAN client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door lock • Small footprint due to compact design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust design (solid steel construction, powder-coated) • No machine adapters required • Power supply 400 V / 50 Hz / 3ph • Minimum compressed air connection 6 bar • Dimensions: 1200 x 600 x 2300 mm (LWH)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, frezos galvos padėtis: mittig, veleno greitis (maks.): 60 000 aps./min, bendras aukštis: 1 550 mm, bendras ilgis: 1 870 mm, bendras plotis: 1 040 mm, sukimosi greitis (maks.): 60 000 aps./min, įvesties srovės tipas: trifazis, bendras svoris: 560 kg, darbo diapazonas: 420 mm, garantijos trukmė: 12 mėnesiai, pavaros tipas: Linearmotor, Įranga: sūkių greitis be galo kintamas, Semi-automatic Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the increasing demands of the production process. PCBs of various materials are separated using dust-free and low-stress sawing and milling techniques, ensuring maximum product flexibility, precision, and throughput. Highly dynamic linear motor axes, advanced tooling, and gripping systems meet the highest quality standards, guaranteeing the machine's long service life and reliability. Semi-automatic depaneling – tailor-made solutions The LOW 4322 enables rapid product changeovers while maintaining short separation and handling times. Loading of panelized PCBs is done with a parallel shuttle system, with positioning and clamping using pin-clamping technology, optionally in combination with vacuum suction, when required. Rcsdpfsxt Dk Rex Ahmef Made in Germany The machine is equipped with: • One shaft and disc tool separation module on the Z-axis (automatically rotatable 0–90°) • X-Y cross table module using linear motor technology with high-resolution scale system • Dual loading module set up as a parallel shuttle, separated left/right with sliding doors • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area: 420 x 330 mm per side • Automatic milling cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage detection (for shaft cutters only) • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant Optionally, a dust extraction unit can be retrofitted upon request.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 30 W, aušinimo tipas: oras, bendras plotis: 1 550 mm, bendras aukštis: 2 050 mm, bendras ilgis: 900 mm, bendras svoris: 120 kg, durų angos aukštis: 400 mm, nuskaitymo srities ilgis: 150 mm, nuskaitymo srities plotis: 150 mm, Z ašies eigos atstumas: 300 mm, reikalingas plotis: 1 550 mm, reikalingas aukštis: 2 050 mm, lazerio bangos ilgis: 1 064 nm, aplinkos temperatūra (min.): 15 °C, aplinkos temperatūra (maks.): 35 °C, įėjimo dažnis: 50 Hz, lazeri tipas: šviesolaidinis lazeris, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is designed for a very broad range of marking applications. Equipped with the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be fitted with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos easily and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. It can also import data (such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also supported. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long components, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (other sizes optional) • Signal indicator to display operational status • Optional: rotary axis (3-jaw chuck) • Optional: extraction unit (incl. activated carbon filter) • Optional: digital height measurement system • Optional: autofocus system for automatic focal distance determination • Optional: extension arms for large components (single-sided or double-sided) • Marking software EZCAD in German/English Rcedpfx Aoxd Az Nshmjf • Pilot laser (simple preview, plaintext preview) • Focus finder (easy focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 20 W, bendras plotis: 605 mm, bendras aukštis: 1 080 mm, bendras ilgis: 350 mm, bendras svoris: 40 kg, garantijos trukmė: 12 mėnesiai, The mobile laser LAS 23 portable stands out due to its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy as well as small workpieces. The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created quickly and easily, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. Additionally, the software can extract data (such as drawing numbers, project titles, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also supported. Made in Germany • Fiber laser 20W (optional: 30 Watt, 50 Watt) • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light to indicate operational status (in handpiece) • Marking software EZCAD • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of the portable laser unit: 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system Rjdpfxjxuqxqj Ahmocf