Donau Dr 32 pirkti naudotą (54)

Būklė: naudotas, Gamybos metai: 1989, Gręžimo galia pliene (skersmuo): 32 mm Išsikišimas: 1230 mm Stalo paviršius: 1200 x 500 mm Gręžimo eiga: 180 mm Padavimas – automatinis: 0,10 - 0,15 - 0,20 - 0,30 mm Sūkių diapazonas: 60 - 1800 aps./min Kūginė jungtis: MK 4 Bendra galingumo paklausa: 2,7 kW Dodpfx Afoy Aa H No Aout Staklių svoris apie: 1,8 t Užimamas plotas apie: 2,2 x 1,8 x 2,3 m Greita radialinė gręžimo staklės su: - automatiniu padavimu - sriegimo įrenginiu

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Dusdpfx Aforn Riqe Aet Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1980, Darbo stalas 500 mm x 1200 mm Išsikišimo eiga 600 mm Įrankio tvirtinimas MK 4 Djdpfx Afjx N Ih Io Aeut Gręžimo galia 32 mm pliene Sriegimo įrenginys Aušinimo įrenginys Apsaugos įtaisas ant grąžto Pilnai atnaujintas 2026 m.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1976, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping device Coolant system Electrics 24V control voltage Dujdpfx Afswnn S Ro Aet Emergency stop, dual channel Safety guard at drill Completely overhauled 2025 12 months warranty New paint finish RAL 7035/7031

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1983, Work table 600mm x 1200mm Horizontal arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread-cutting device Dedpfemt Ed Rjx Af Asut Coolant system Electrics 24V control voltage Emergency stop, dual-channel Drill safety guard Fully overhauled in 2025 12-month warranty New paint RAL 7035/7031

Būklė: paruoštas naudoti (naudotas), Siūlomas naudotas greito veikimo radialinis gręžimo staklės Donau DR 32, 731 serija. Įrankio laikiklis: MK4, špindelio eiga: 200 mm, ištrauka: apie 900–1050 mm, aukščio reguliavimas: apie 400–600 mm, sūkių diapazonas: 40–2000 aps./min., padavinėjimai: 0,1/0,2/0,3/0,4 mm apsisukimui, integruota aušinimo sistema, su pasukama sija, didelis T formos lizdinis stalas, svoris apie 1500–1800 kg, staklių matmenys X/Y/Z apie 1800/1000/2200 mm. Apžiūra galima pagal susitarimą. Duedpfxsykut Se Af Aot

Būklė: visiškai atnaujintas (naudotas), Apsisukimų dažnio plokštės remontas Duodpfxjy Rfzus Af Ajt

Būklė: naudotas, gręžimo pajėgumas: 23 mm, Įranga: Tipinė plokštelė prieinama, Greita radialinė gręžimo staklė – kolonninė gręžimo staklė Donau DR23 radialinė gręžimo staklė Serijos numeris 2062-4 Darbinė įtampa 380 V su neutraliu laidininku, 50 Hz, 3 fazės Gręžimo pajėgumas: iki Ø 50 mm Apsisukimų diapazonas: 58–1275 aps./min Sriegimo įrenginys, išsikišimas 920 mm Staklių apšvietimas Grunto plokštė, stalo dydis apie 1100x400 mm Variklio galia apie 1,5 kW, be aušinimo skysčio įrenginio 2 T formos grioveliai kairėje gale Svoris: apie 1 200 kg Apžiūra įjungus į elektros tinklą galima pagal susitarimą. Dėl visų techninių duomenų pasiliekame teisę į rašybos klaidas ir netikslumus. Kaina pagal užklausimą. Parduodama tik ES šalyse. Duodowybqqjpfx Af Aet

Būklė: naudotas, Gamybos metai: 1987, Siūlome šį naudotą greitaeigį radialinį gręžtuvą Donau DR 40-Z, pagamintą 1987 m. Gamintojas: Donau Modelis: DR 40-Z Serijos numeris: 1146-3 Dusdpfey Dn E Nex Af Aot Jei turite klausimų ar reikia daugiau informacijos, rašykite mums žinutę. Įrenginio vieta – Osterode/Harcas. Įrenginį galima apžiūrėti susitarus iš anksto. Tai naudotas įrenginys, todėl parduodamas be jokios garantijos.

Būklė: naudotas, Gamybos metai: 1971, Technical Details: Drilling capacity in steel (diameter): 23 mm Max. workpiece height: ./x. 2 mm Drilling capacity in cast iron: Ø 26 mm Spindle taper: MK 3 Dedpfxev Ay T Dj Af Aeut Quill stroke: 135 mm (manual/automatic) Spindle speeds: 7-step rpm Feed range: mm/rev Table size: 1200 x 500 mm Clamping surface: 1070 x 400 mm Total power requirement: 3.55 kW Machine weight approx.: 1.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.2 x 2.2 m Arm: - Vertical adjustment: 450 mm and horizontal: 610 mm - Swivable 360°, hydraulic clamping Right- and left-hand rotation for tapping with automatic reversing Operation via control panel Coolant tank with pump

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, stalo ilgis: 1 200 mm, stalo plotis: 500 mm, veleno tvirtinimas: MK 3, aukščio reguliavimo tipas: elektrinis, Donau DR23 radialinio gręžimo staklės – tvirta kokybiška mašina Parduodamos patikimos Donau DR23 radialinio gręžimo staklės, idealiai tinkančios dirbtuvėms, metalo apdirbimui ar pramoninei gamybai. Šios staklės išsiskiria stabiliu korpusu, aukštu tikslumu ir universaliais panaudojimo būdais gręžiant, frezuojant, sriegikliu. Informacija: Dujdpfoyrtkxsx Af Ast Gamintojas: Donau Modelis: DR23 Radialinio gręžimo staklės, kapitališkai suremontuotos Vaumtec Greito keitimo griebtuvas Stabili ketaus konstrukcija Reguliuojamas strypas lanksčiam didelių ruošinių apdirbimui Tinka plienui, aliuminiui ir kitiems metalams Sukimosi krypties pakeitimas (dešinė / kairė)

Būklė: naudotas, Gamybos metai: 1991, veleno tvirtinimas: MK 4, Darbo stalas 600 mm x 1200 mm Konsolės eiga 600 mm Įrankio laikiklis MK 4 Gręžimo geba 40 mm pliene Dedpfx Afox N Ifte Asut Sriegiklio įrenginys Aušinimo skysčio įranga Dokumentacija

Būklė: naudotas, Gamybos metai: 1991, Darbo stalas 600mm x 1200mm Konsolės eiga 600mm Įrankio tvirtinimas MK 3 Dsdexpfglspfx Af Asut Gręžimo pajėgumas 28mm pliene Sriegimo įrenginys Aušinimo sistema Dokumentacija

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 Dedsu Et Nbopfx Af Aout - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 2355-2, Offer 24416 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 Dusdpfxsufw S Re Af Aet - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2500 x D 2300 mm - Weight approx.: 1500 kg - with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: geras (naudotas), DONAU DR 23 - Greitaeigė radialinė gręžimo staklės - Gręžimo galia / plienui apytiksl. 28 mm - Išsikišimas 700 mm - Morzės kūgis MK3 - Apsisukimų diapazonas 70-1550 aps./min (pavarų dėžė) - Automatinės pastūmos 0,075-0,3 mm - Sriegimo įrenginys - Gręžimo gylis apie 130 mm - Hidraulinis tvirtinimas - Dokumentacija Duedpfoxzqauox Af Aet Matmenys: IxPxA 2x1,7x1,9 metro / Svoris 1900 kg Neteisinga informacija ar įvedimo klaidos galimos.

Būklė: geras (naudotas), Gamybos metai: 1965, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 930 mm, For sale: Schnellradial drilling machine by Donau, type DR30 The machine is in good and fully functional condition. Technical Data: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle taper: MK 3 Spindle speeds: stepless, approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Arm reach: approx. 930 mm Arm swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Equipped with: - Tapping unit with automatic shut-off and reverse Dujdpfswal Hpox Af Aot - Motorized height adjustment of the arm - Left-hand drilling control, manual and foot operation Transport and loading can be organized Europe-wide on request and at an extra charge. Prices plus VAT An inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES Dedoirax Ujpfx Af Aout - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: KNAPP-DONAU Modelis: UZFM Pagaminimo metai: 1974 Būklė: naudotas Kaina & Vieta Vieta: Rostokas, Vokietija Frezavimo ilgis: 1800 mm Frezavimo plotis: 260 mm Dujdpfxoy Rgmre Af Ast Didžiausias modulis: 10 mm Stalo matmenys, įskaitant vandens lataką: 460 x 2100 mm Prispaudimo paviršius: 250 x 1850 mm Didžiausias frezos plotis: 100 mm Frezavimo stumoklio pastūma, bepakopė: 0 – 500 mm/min. Greitoji eiga: 3000 mm/min Frezavimo galvutė pasukama: ±30° Frezavimo veleno sūkių diapazonas, 9 žingsniai: 29–178 aps./min. Frezavimo galvutė pasukama į abi puses nuožulniai dantavimui: 30° Staklių svoris: apie 35 t Erdvės poreikis: apie 4 x 1,85 x 1,85 m Įranga/priedai: - 11 spaustuvų - Pakeičiami krumpliaračiai - Tvirtinimo įranga - Dokumentacija

Būklė: naudotas, Gamybos metai: 2007, Drilling capacity in steel (diameter) 40 mm Throat depth 1050 mm Speed range 15 – 2800 rpm Feed range 0.075 – 0.45 mm/min Dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine features • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) at rear of machine base • 2 T-slots (18 mm) at left side of machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE mark • Safety guard • USB interface Dimensions and travel Tool holder SK 40 Duedpfxey Nd T He Af Ast Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 – 1590 Work table height mm 900 Machining values Drilling capacity full material St 60 Ø 40 GG 22 Ø 50 Tapping St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse (W): m/min 3 Infinitely variable feed mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental, Unit: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry options Zero point determination: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - Centering cast and flame-cut parts - Angular position detection on round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Gręžimo pajėgumas St 60/GG 22: 40/50 mm Sriegimo pajėgumas St 60/GG 22: M 36/M 45 Stalo prispaudimo paviršius: 600 x 1800 mm Galinės svirties aukščio reguliavimas: 450 mm Mažas/didelis gręžimo spindulys: 305/1305 mm Veleno tvirtinimas: SK 40 Pinolio eiga: 200 mm Veleno apsukos be pakopų: 15 - 2800 ap./min Dedpfjy I Ua Isx Af Aeut Be pakopų padavimas: 5 - 2000 mm/min Veleno pavara, dažnio valdymas: 5,5 kW Elektros pajungimas: 400 V, 14 kVA Svoris: 3400 kg Užimama vieta: 3800 x 2000 x 2500 mm

Būklė: naudotas, Gamybos metai: 1994, Radial drilling machine, Danube Danuflex 145 Dsdpfx Aowtq Dysf Aeut

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table top min/max mm 70 / 680 Distance spindle nose – floor min/max mm 970 / 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining capacities Drilling capacity solid material: St 60 Ø 40 mm, GG 22 Ø 50 mm Thread cutting: St 60 M 36, GG 22 M 42 Main spindle drive AC Motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 (constant between 15 – 2000 min-1) Feed drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Stepless feeds: mm/min 5 – 2000 Accuracy Positioning accuracy (X, Y-axis over 1200 mm): mm ± 0.075 Electrical data Operating voltage/frequency: V/Hz 400 / 50 Control voltage: V 24 Hydraulic unit for clamping: kW 0.75 Total connected load: kVA 13.0 Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: kartesian or polar, absolute or incremental values Dsdpfx Afeyxw Dde Asut Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-related cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selectable entry options Reference point determination: Cycles for determining reference points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – alignment of cast and flame-cut parts – Angle position detection on round parts by probing reference edges/surfaces Test graphic: Graphic display of drilling patterns

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2002, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Factory overhauled in 2026 • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • 2 T-slots (18 mm) each at rear and left of machine base • Machine lamp • Central lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance from spindle nose to table surface min. mm 40 max. mm 710 Distance from spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity (solid) St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Infinitely variable feed mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Djdpfx Afoyv A Uce Aeut Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety devices Dimensions and Traverse Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance Spindle nose – table top min. mm 70 max. mm 680 Distance Spindle nose – floor min. mm 970 max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Machining Capacity Max. drilling in solid material St 60 ⌀ 40 mm GG 22 ⌀ 50 mm Tapping St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Dsdpfx Ajyuqmisf Ajut Feed rates, stepless mm/min 5 – 2000 Accuracy Positioning accuracy X/Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly visible from all angles, 215 x 160 mm Position display: Cartesian or polar, indication absolute or incremental, units in mm or inch or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine support: yes Machining Cycles Standard software options: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program restart with selectable entry points Zero point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Alignment of cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns