Donau Dr 32 pirkti naudotą (56)

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table top min/max mm 70 / 680 Distance spindle nose – floor min/max mm 970 / 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining capacities Drilling capacity solid material: St 60 Ø 40 mm, GG 22 Ø 50 mm Thread cutting: St 60 M 36, GG 22 M 42 Main spindle drive AC Motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 (constant between 15 – 2000 min-1) Feed drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Stepless feeds: mm/min 5 – 2000 Accuracy Positioning accuracy (X, Y-axis over 1200 mm): mm ± 0.075 Electrical data Operating voltage/frequency: V/Hz 400 / 50 Control voltage: V 24 Hydraulic unit for clamping: kW 0.75 Total connected load: kVA 13.0 Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: kartesian or polar, absolute or incremental values Unit of measure: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on machining type, material-related cutting data suggestions Tool management: max. 500 tools Godpfx Aeyxw Ddja Usbl Subroutine technology: yes Machining cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selectable entry options Reference point determination: Cycles for determining reference points by manual probing of the workpiece for: – arbitrarily clamped rectangular parts – arbitrarily clamped round parts – alignment of cast and flame-cut parts – Angle position detection on round parts by probing reference edges/surfaces Test graphic: Graphic display of drilling patterns

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2002, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Factory overhauled in 2026 • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • 2 T-slots (18 mm) each at rear and left of machine base • Machine lamp • Central lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance from spindle nose to Gbsdpfx Aajyv A Uce Uel table surface min. mm 40 max. mm 710 Distance from spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity (solid) St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Infinitely variable feed mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Specification • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety devices Dimensions and Traverse Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance Spindle nose – table top min. mm 70 max. mm 680 Gbjdpfx Aaoyuqmij Usl Distance Spindle nose – floor min. mm 970 max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Machining Capacity Max. drilling in solid material St 60 ⌀ 40 mm GG 22 ⌀ 50 mm Tapping St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rates, stepless mm/min 5 – 2000 Accuracy Positioning accuracy X/Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly visible from all angles, 215 x 160 mm Position display: Cartesian or polar, indication absolute or incremental, units in mm or inch or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine support: yes Machining Cycles Standard software options: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program restart with selectable entry points Zero point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Alignment of cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Būklė: beveik kaip naujas (naudotas), Donau Donauflex 135 greita radialinė gręžimo staklė Gamintojas: Donau Tipas: Donauflex 135 Pagaminimo metai: 2020 Būklė: Labai gera, naudota, bet kaip nauja Iš karto pristatoma iš sandėlio. Gedjyucahjpfx Aa Usbl

Būklė: naudotas, Gamybos metai: 1960, Techninė informacija: Godpfx Aasx Afn Nj Uobl Detalės aukštis - maks.: 600 mm Pasiekiamumas: apie 700 mm Gręžimo pajėgumas pliene (skersmuo): 25 mm Stalo dydis: 1100 x 400 mm Šiuo metu įrenginys yra technikos skyriuje. Todėl įrenginys NĖRA paskelbtas/eksponuojamas. Remonto darbai dar tęsiami....

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots Gbjdpfx Aaeynt Ucs Uol • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: geras (naudotas), Gamybos metai: 1998, DONAU DANUMERIC 440, pagaminimo metai 1998 Techniniai duomenys: - Stalas 1800 x 600 mm, 4 T formos grioveliai - Gręžimo spindulys 540 – 1590 mm Gjdpfx Ajyplb Rea Usbl - Špindelio tvirtinimas SK40 - Apsisukimų skaičius 15 – 2800 aps./min. - Variklio galia 5,5 kW - Svoris apie 2 800 kg

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication Gsdpsylnpiefx Aa Usbl • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: naudotas, Gamybos metai: 1971, Frezavimo ilgis: 1750 mm Frezavimo plotis: 260 mm Modulis - maks. 10 mm Stalo matmenys su vandens surinkimo lataku: 460 x 2100 mm Gjdpfx Aaeylpzyo Uobl Stalo tvirtinimo paviršius: 250 x 1850 mm Frezaus plotis - maks. 100 mm Frezu vežimėlio pastūma, be laipsnių: 0 - 500 mm/min. Greitos eigos: 3000 mm/min Frezu galva pasukama ±30° Frezuvelio apsisukimų dažnio diapazonas, 9 žingsniai: 29 - 178 aps./min Frezu galva abipus pasukama nuožulniems dantračiams: 30° Staklių svoris apie 4 t Užimama vieta apie 4 x 1,85 x 1,85 m Įranga/priedai: - 7 spaustuvai - Keičiamieji krumpliaračiai - Tvirtinimo įrankiai - Dokumentacija

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 Gbodjyhdvkspfx Aa Usl table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Gbjdpou Aa I Ssfx Aa Uel Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Gedpfxsu Dg D Ao Aa Uebl Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm Gbodpfjrmkfnox Aa Usl • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Godpfsvv Spkox Aa Usbl Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: geras (naudotas), Gamybos metai: 1988, High-Speed Radial Drilling Machine Manufacturer: Donau Model: DR 40 DIGI Control: NC control Year of manufacture: 1988 Gedpfxoikvcaj Aa Ujbl APPLICATIONS – DRILLING Drilling capacity in steel (total hole): 40 mm Arm reach (max): 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of gears: 2 Tool holder: MT 4 SPECIFICATIONS Table area: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Mains voltage: 400 V Frequency: 50 Hz DIMENSIONS / WEIGHT Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Drive power: 6 kW

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MT4, spindle speed: 3500rpm, feed: 1050mm/min, outreach range: 420mm-1320mm, arm travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection possible. Gbedpfju N Hdasx Aa Uol

Būklė: paruoštas naudoti (naudotas), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Godpfx Aajyrdc Ss Ujbl Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swiveling range: approx. 330° Column diameter: 195 mm You are welcome to come by for an inspection. We can gladly arrange cost-efficient shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers. Brand names and trademarks mentioned are the property of their respective owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each at machine base rear and left • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MK 4 Column diameter 195 mm Table dimensions 1200 x 750 mm Number of T-slots 5 T-slot spacing 125 mm Quill stroke 220 mm Column travel 450 mm Distance spindle collar - min 40 mm table top max. 710 mm Distance spindle collar - min 840 mm base plate max. 1510 mm Drilling radius min 540 mm max. 1590 mm Working table height 900 mm Machining Capacities Drilling capacity in solid St 60 ⌀ 45 GG 22 ⌀ 55 Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range: 15 - 2800 rpm Torque max. 250 Nm constant from 15 - 200 rpm Feed Drives Infinitely variable feed 0.02 - 0.7 mm/rev Feed force 12000 N Electrical Data Operating voltage / frequency 400 V / 50 Hz Control voltage 24 V Total connected load 9.3 kVA Gbedpfx Aaex Uwpxo Usl Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 700 mm, veleno greitis (maks.): 8 000 aps./min, Travelling column machine, completely overhauled in 2025 Clamping table size: 1500 x 1000 mm Table height: 750 mm Number of T-slots: 7 T-slot size to DIN 650: 18 mm Travel paths: X-axis: 1500 mm Y-axis: 1000 mm Z-axis: 700 mm Distance table top – spindle face min/max: 150 / 850 mm Main spindle drive for 8000 rpm Tool holder: SK 40 AC motor, frequency-controlled, 26 kW at 44% duty cycle Speed range: 15 – 8000 rpm Torque: 245 Nm Internal coolant supply (IKZ) Chip conveyor with band filter system Feed drives: X-axis AC servo motor: 3.5 kW Y-axis AC servo motor: 2.0 kW Z-axis AC servo motor: 3.5 kW Rapid traverse rates (X/Y/Z): 30/30/20 m/min Indirect absolute linear measuring system Accuracy: Positioning accuracy X, Y axes over 1000 mm: ± 0.0150 mm Repeatability X, Y axes: ± 0.0075 mm Positioning accuracy Z axis: ± 0.0150 mm Repeatability Z axis: ± 0.0075 mm 24-position tool magazine, mounted on the left side of the machine Gbodpfx Aajw I Tm Se Uel - Tool stations: 24 - Tool shank (DIN 69871 / 69872): SK 40 - Max. tool diameter: 76 mm - Max. tool length: 250 mm - Max. tool weight: 8 kg CNC control: Heidenhain iTNC530

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 65039, X ašies eiga: 1 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 700 mm, veleno greitis (maks.): 8 000 aps./min, Travelling column machine Overhauled in 2023 Worktable clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 T-slot size (DIN 650) mm 18 Gbedpfowv Nl Usx Aa Usl Traversing paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top – spindle nose min/max. mm 150 / 850 Main spindle drive for speed 8000 rpm AC motor, frequency controlled kW 16 at 44% duty cycle Speed range: rpm 15 – 8000 Torque at 44% duty cycle Nm 104 Constant up to rpm 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min 30/30/20 Indirect measuring system. Accuracy Positioning accuracy X-, Y-axis over 1000 mm mm ±0.0150 Repeatability X-, Y-axis mm ±0.0075 Positioning accuracy Z-axis mm ±0.0150 Repeatability Z-axis mm ±0.0075 24-position tool magazine, right-mounted on the travelling column - Tool stations 24 - Tool holder (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain iTNC530, optionally 620

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 900 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 700 mm, veleno greitis (maks.): 8 000 aps./min, Work Table Clamping Surface mm 3000 x 1000 Table Height mm 750 Number of T-slots 6 Size of T-slots mm 18 Travel Paths X-Axis mm 2900 Y-Axis mm 1000 Z-Axis mm 700 Gbodow E Ey Hepfx Aa Uel Distance between Table Top and Spindle Bottom min/max. mm 150 / 850 Main Spindle Drive for 8000 rpm AC Motor, frequency controlled kW 16 at 44% duty cycle Speed Range: rpm 15 – 8000 Torque at 44% duty cycle Nm 96 (constant up to 1500 rpm) Feed Drives X-Axis AC Servo Motor kW 3.5 Y-Axis AC Servo Motor kW 2.0 Z-Axis AC Servo Motor kW 3.5 Rapid Traverse Speeds (X/Y/Z): m/min. 30/30/20 Indirect linear measuring system. Accuracy Positioning Accuracy X-, Y-Axis over 1000 mm mm ±0.0150 Repeatability X-, Y-Axis mm ±0.0075 Positioning Accuracy Z-Axis mm ±0.0150 Repeatability Z-Axis mm ±0.0075 Tool Magazine 2x 24-Station Disc magazine design - Tool stations 16 - Tool shank (DIN 69871/69872) SK 40 - Max. Tool Diameter mm 76 - Max. Tool Length mm 300 - Max. Tool Weight kg 8 Machine Control: Heidenhain TNC 426 Enclosure Guarding of the entire work area, designed as partial enclosure per current standards of German accident prevention regulation (UVV) and European Standard EN 12417, with manually operated work area door including electrical interlock and safety. Machine door equipped with polycarbonate glazing. 30 bar High-Pressure Coolant System (IKZ) For use with tools that have internal coolant supply, switchable between 19 liters/min at 30 bar or 19 liters/min at 15 bar, complete with free-standing paper belt filter. Internal cooling also possible with air. Clean tank volume l 500 Filtration grade µm 30 Filter capacity l/min. 120 Hinged Belt Chip Conveyor Instead of chip collecting tray with integrated coolant tank, right-hand discharge Discharge width approx. mm 300 Discharge height approx. mm 1050 Incl. coolant system Tank capacity liters approx. 150 Delivery rate l/min. 30 Pump pressure bar 2.0 Heidenhain HR 410 Handheld Control Unit External handheld control unit with built-in electronic handwheel, connected to machine via cable, for manual axis movement, with emergency stop button. Centralized Grease Lubrication Documentation Operating and programming manual Hydraulic and pneumatic diagrams Wiring diagram Test report

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base Gbodsxn A Spopfx Aa Usl • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: nepatikrintas (naudotas), mašinos/transporto priemonės numeris: 6104, Funkcionalumas: nepatikrintas, stalo plotis: 600 mm, stalo ilgis: 1 200 mm, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, veleno greitis (maks.): 2 800 aps./min, stalo aukštis: 820 mm, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Machining Data Drilling capacity in solid (St 60): Ø 40 mm Drilling capacity in solid (GG 22): Ø 50 mm Thread cutting (St 60): M 36 Thread cutting (GG 22): M 45 Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,200 mm x 600 mm Number of T-slots: 4 T-slots (DIN 650): 18 H7 T-slot spacing: 125 mm Distance spindle nose to table: 185 mm Distance spindle nose to base plate (min.): 985 mm Distance spindle nose to base plate (max.): 1,595 mm Drilling radius: 540 - 1,290 mm Swivel range: 330° Gbsdpfx Aswvi I Noa Uol Table height: 820 mm Quill stroke: 200 mm Column travel: 410 mm Table Table length: 1,200 mm Table height: 820 mm Table width: 600 mm Rapid Traverse X-axis (with drilling radius 1,000 mm): 5 m/min Y-axis: 4 m/min Spindle Spindle speed: 15 – 2,800 rpm Feeds (infinitely variable): 5 – 2,000 mm/min Accuracy (according to manufacturer) Positioning accuracy X/Y-axis: ±0.075 mm Repeatability X/Y-axis: ±0.015 mm Backlash over entire table area: 0.02 mm Positioning accuracy Z-axis: ±0.085 mm Repeatability Z-axis: ±0.03 mm MACHINE DETAILS Overall height: 2,500 mm Overall width: 1,400 mm Overall length: 2,500 mm Total weight: 3,000 kg EQUIPMENT - Two-axis digital readout

Būklė: naudotas, Gamybos metai: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universal - CNC gesteuerte Zahnstangenfräsmaschine Type UZFM - V 300 H - CNC Baujahr 1990 # 90-244x _____ max. Verzahnungslänge 2.100 mm Fräsweg/Fräsbreite quer max. 300 mm Modulbereich St/GG max. 16/18 Tisch-Aufspannfläche 510 x 2.400 bzw. 275 x 2.120 mm Einbauhöhe unter Fräs-Spindel-Achse min./max. 150 / 430 mm Fräser-Ø min. / max. Ø 125 + 2 x Schnitttiefe / 280 mm Fräserbreite max. fliegend / mit Gegenlager 50 / 140 mm Fräserdorn-Ø max. 22 - 50 mm Frässpindelkopf schwenkbar rechts / links (Hinterfräsungen) 30 / 45 ° Frässchlitten schwenkbar rechts / links (Schrägverzahnung) 30 ° 9 Spindeldrehzahlen 40 - 120 U/min. Vorschübe stufenlos (Frässchlitten) / Eilgang 0 - 1.300 / 2.000 mm/Min. Tisch-Eilgang 10.000 mm/Min. Frässpindelantrieb 5,5 kW Gesamtantrieb 10 kW - 400 V - 50 Hz Gewicht 5.000 kg Zubehör / Sonderausstattung: o SIEMENS - CNC - Steuerung Model M 810 für die Teilachse ( X ), sodaß eine schnelle Umstellung der Maschine möglich ist ohne Wechselräder. Teilschritte 0,001 - 2100 mm, auch unterschiedliche Teilungsdistanzen programmierbar, Gbsdpet Hwwqofx Aa Ujl " Einstellung aller Vorschub- und Eilgangwege über die Hydraulik, Vorschub einstellbar für 2 Schnitte, Wegbegrenzung der Achsen über voreinstellbare Endschalter o Aufgebaute hydraulische Werkstückspanneinrichtung ca. 2.000 x 160 mm lang o verstärkter Fräskopf mit stufenlos regelbare Fräserdrehzahl o separat stehender Schaltschrank und Hydraulikanlage , im Tisch eingebauter Späneföderer und separat stehender Späneförderer mit Kühlmitteleinrichtung, Zentralschmierung, etc. Die Maschine könnte auch mit einer aktuellen SIEMENS-Steuerung nachgerüstet werden! Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: D O N A U - K N A P P (Germany) Universal - CNC-Controlled Rack Milling Machine Model UZFM - V 300 H - CNC Year 1990 Serial No. 90-244x _____ Max. Cutting length 2.100 mm Milling travel / milling width cross max. 300 mm Module in steel / cast iron, max. 16 / 18 Table clamping size 510 x 2.400 resp. 275 x 2.120 mm Mounting height under cutter, depending on cutter Ø 150 - 430 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm Cutter width max. without/with counter bearing support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45 ° Milling spindle speeds steplessly adjustable 40 - 120 rpm Milling slide swivelling right / left for Helix Cuts 30 ° Feeds, infinitely variable (milling slide) 0 - 1.300 / 2.000 mm/min Quick return of WP-table 10.000 mm/min Milling spindle drive 5,5 kW Total electrical load 10 kW - 400 V - 50 Hz Weight 5.000 kg Accessories / Special Features: * SIEMENS-CNC-Control for the Indexing axis ( X ) so th...

Būklė: naudotas, Gamybos metai: 1980, Milling length: 1750 mm Milling width: 260 mm Module – max.: 10 Module – min.: 12 Total power requirement: 8 kW Machine weight approx.: 4500 kg Space requirement approx.: m D O N A U - K N A P P Universal Rack Milling Machine Model UZFM - V 300 H Year of manufacture: 1980 # 80-234x ----- Gbedpet Hxagefx Aa Usl Max. gear cutting length: 1,750 mm Milling travel / max. cross milling width: 260 mm Helical gearing up to: 30° Module range steel/grey cast iron max.: 10 to 12 Effective clamping surface (table): 275 x 1,830 mm Mounting height under milling spindle axis min./max.: 150 / 430 mm Milling cutter diameter min. / max.: 108 + 2 x cutting depth / max. 165 mm Max. milling cutter width unsupported / with counter support: 50 / 140 mm Milling arbor diameter max.: 22 - 50 mm 9 spindle speeds: 29 – 178 rpm Milling slide swivels right/left: 30° Milling spindle head swivels right/left: 30 / 45° Infinitely variable feed (milling slide): 0 – 600 mm/min Rapid return: 2,000 mm/min Milling spindle drive approx.: 4 kW Total drive: 8 kW - 400 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: • Automatic milling sequence control via cam track on milling head slide and table slide, with skip function (automatic bypass of non-machining areas) and pendulum milling operation (synchronous milling on one half of the table with workpiece changeover on the second half) • Hydraulic workpiece clamping system, continuous approx. 260 x 1800 mm, max. clamping width 140 mm, clamping height approx. 60 mm, with dedicated hydraulic unit and electrical release • Manual fine adjustment of the table (0.001 mm), e.g., for precise positioning into a pre-milled gearing • Various change gears (approx. 10 pcs), 2 arbor mandrels, central lubrication with impulse, built-in hydraulic system, separate coolant device, separate control cabinet, various used rack milling cutters Price, ex stock plus VAT: € 49,500.-- This machine is particularly suitable for milling racks as well as for the production of broaching tools (undercutting by swiveling the milling head). Condition: very good – ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice