Aukštos spartos radialinė gręžimo staklės

DONAU Danuflex 145

Būklė: naudotas, Gamybos metai: 1994, Radial drilling machine, Danube Danuflex 145 Kledpfjwtq Dyex Ap Est

Būklė: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm Klodslgvkispfx Ap Ejt - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Ksdpfx Aeynt Ucep Eslt Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Klodpfsylnpisx Ap Eet Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: naujas, Gamybos metai: 2025, Effektive Rohrlänge für den Zuschnitt: 6500 mm / 9200 mm Laserleistung: 6000 W / 3000 W / 2000 W / 1500 W Effektiver Schneiddurchmesser Rundrohr: Φ20–230 mm Effektiver Schneiddurchmesser Vierkantrohr: □20×20 – □160×160 mm Schnittkantenlänge: 20–170 mm Außendurchmesser maximal: ≤230 mm Zertifizierung: CCC, CE, GS, ISO, SGS Lasergenerator-Marke: IPG / MAX Garantie: 3 Jahre Stromversorgung: 110V/220V/380V 50Hz/60Hz 1. Größer als der Standard Der maximale Schneiddurchmesser der T-Serie ist 30 % länger als bei marktüblichen Produkten; das maximale Schneidgewicht ist im Vergleich zu handelsüblichen Maschinen um 100 % erhöht. 2. Spannfutter-Positionskontrolle und Drehmomentregulierung Das CNC-selbstzentrierende Spannfutter mit eigenem Patentschutz kann das Werkstück automatisch gemäß eingegebener Rohrgröße spannen; die Positionsüberwachung im Drehmomentmodus stellt sicher, dass dickwandige Rohre nicht gelöst und dünnwandige Rohre nicht verformt werden. Die neue, staubdichte Konstruktion gewährleistet einen langlebigen, störungsfreien Betrieb. 3. Kantenerkennung und Zentrierung Neue Funktion zur automatischen Kantenerkennung und Rohrzentrierung. Optimiertes Kantenerkennungsverfahren und Algorithmus ermöglichen höhere Schnittgenauigkeit und Prozessstabilität. Kjdpfx Apog Dgbhs Eolt

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each at machine base rear and left • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MK 4 Column diameter 195 mm Table dimensions 1200 x 750 mm Number of T-slots 5 Kledpfx Apsx Uwpxe Est T-slot spacing 125 mm Quill stroke 220 mm Column travel 450 mm Distance spindle collar - min 40 mm table top max. 710 mm Distance spindle collar - min 840 mm base plate max. 1510 mm Drilling radius min 540 mm max. 1590 mm Working table height 900 mm Machining Capacities Drilling capacity in solid St 60 ⌀ 45 GG 22 ⌀ 55 Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range: 15 - 2800 rpm Torque max. 250 Nm constant from 15 - 200 rpm Feed Drives Infinitely variable feed 0.02 - 0.7 mm/rev Feed force 12000 N Electrical Data Operating voltage / frequency 400 V / 50 Hz Control voltage 24 V Total connected load 9.3 kVA Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Būklė: naujas, Gamybos metai: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Item No. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned along the X-axis at the desired spot, clamped, and drilled. All you need to do is press the start button. The horizontal gripper of the positioning system allows easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or recalling a previously saved program, the machine operates completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Klodpfx Aofu Itbjp Eot Advantages: • A series of holes can be drilled automatically at precise intervals. • Possible operator errors are drastically reduced. • Programming takes only a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower required. Fully automatic design Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vice (clamping width 200 mm) Minimal-quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV (see technical data sheet for specifications) Rotation lock Motorised height adjustment Tapping unit NC positioning system PD 200p Feed force 200 kg Positioning by absolute or incremental dimensions possible Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel carrier profile as dirt protection Infeed and outfeed roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting brackets / Roller width 407 mm / Support plates / Bracing / Roller diameter 50 mm / Steel rollers We look forward to your enquiry! Plantec Maschinen GmbH

Būklė: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine Ksdpfxsirax Ue Ap Eslt - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Valdymo sistema MXS 850 IV Duomenys: Didžiausias posūkis virš lovio: 755 mm Didžiausias posūkis virš atramos: 740 mm Didžiausias tekinimo diametras: 366 mm Tekinimo ilgis: 785 mm Judėjimai: X – 260 mm, Y – 100 ±50 mm, Z – 795 mm Greitaeigė eiga X/Y/Z: 30/20/50 m/min Špindelio galia: 26/22 kW Špindelio greitis: 4.000 aps./min. Pertraukiamos strypo diametras: 80 mm Griebtuvo diametras: 250 mm Špindelio tvirtinimo nosis: JIS A2-8 Špindelio indekso tikslumas: 0,001° Subšpindelio galia: 11/7,5 kW Subšpindelio greitis: 6.000 aps./min. Subšpindelio strypo diametras: 80 mm Subšpindelio griebtuvo diametras: 150 mm Subšpindelio tvirtinimo nosis: JIS A2-5 Subšpindelio indekso tikslumas: 0,001° Įrankių skaičius revolverinėje galvoje / veikiančių: 12/12 vnt. Galia veikiančių įrankių: 5,5 kW Veikiančių įrankių greitis: 6.000 aps./min. Staklių svoris: 6.200 kg Kedpoyilzhefx Ap Ejlt Staklių matmenys (I x P x A): 4,34 x 2,00 x 2,120 m Įranga: Drožlių transporteris, 3 žandikaulių griebtuvas Kitagawa BB-210 pagrindiniame špindelyje ir Kitagawa B 206 subšpindelyje, detalės surinkėjas, įvairūs įrankių laikikliai, detalės išėmėjas, sąsaja strypų padavimui, sinchroninis sriegimas. Staklės dirbo 17 800 valandų.

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area Ksdpfx Apjwf Dpge Eelt The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.