Isar Isp 950 pirkti naudotą (2 920)

Gamybos metai: 2026, būklė: naujas, Our belt presses are equipped with two large pressing rollers, which extend the pressing process and thus ensure particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features automatic brush cleaning, eliminating the need for a high-pressure cleaner. The belt is washed by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, which leads to lower operating costs. The open design allows for quick and straightforward cleaning that takes just a few minutes to complete. Iajdpfjv Sq S Njx Aatjw Technical information: • Rated output: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: Stainless steel WNr. 1.4301, AISI 304 • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless belt speed regulation • User-friendly • Easy to clean • Mobile machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Feed height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Gamybos metai: 2026, būklė: naujas, Our belt filter presses can be disassembled without tools in just a few minutes and are easy to clean. Operation is intuitive, and the belt is effectively cleaned by three spray nozzles and silicone scrapers. This innovative technology ensures particularly economical operation when extracting juice from fruit and vegetables. A high-pressure cleaner is not required, which further reduces electricity costs. Operation only requires a compressor with 8 bar pressure and a ½" water connection. • Fully automatic, stepless adjustment of belt speed • Easy to clean • Low maintenance requirements • Fitted with mobile machine feet • Automatic belt tracking Technical Information Rated capacity: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Iodpfx Aov Sq Nbsatsaw Compressed air requirement: 6 bar approx. 50 L/h Dimensions: Length: 1080 mm Width: 1070 mm Height: 1320 mm Weight: 297 kg Optional: automatic juice discharge

Gamybos metai: 2026, būklė: naujas, Our belt presses are equipped with two large pressing rollers, which extend the pressing process and thus enable particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tensioning and automatic belt control further enhance juice quality. Isdpov Sq Rxofx Aatoaw The belt press features automatic brush cleaning, eliminating the need for a high-pressure cleaner. Instead, the belt is efficiently cleaned by six specially developed water nozzles. Cleaning requires only a compressor with 8 bar pressure and a ½" water connection. Thanks to the special nozzles, water consumption is reduced, which also lowers operating costs. The open design allows for quick and easy cleaning of the unit, which can be completed in just a few minutes. Technical Information • Rated capacity: 650 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h, 6 bar • IP65 electronic control cabinet • Juice yield: up to 75 % • Fully automatic and stepless adjustment of belt speed • User-friendly • Easy to clean • Mobile machine feet Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Feed height: 1,240 mm Pulp discharge height: 500 mm Juice outlet height: 370 mm Weight: 480 kg Optional: Juice collection tray ISW 100 Automatic juice drainage

Būklė: naujas, Gamybos metai: 2026, Hopper capacity: 40 kg Output capacity: Up to 240 bulbs/min Raw material size: 45 – 120 mm Overall machine width: 1700 mm Overall machine height: 2200 mm Overall machine length: 9500 mm Number of processing lanes: 4 Onion loading height: 1000 mm Onion discharge height: 850 mm Waste discharge height: 400 mm Power supply: 3 x 400 V / 50 Hz Installed power: 3 kW Compressed air connection: 8-10 bar Air consumption: 1.9 m³/min Noise level: Above 80 dB Frame construction material: Acid-resistant steel and food-grade plastics CE certificate: yes Iodpfx Asq Edcgoatoaw Topper: Yes

Būklė: labai geros būklės (naudotas), Katalogo numeris 7431 TECHNINĖS SPECIFIKACIJOS – maksimalus apdorojamo elemento plotis 950 mm – maksimalus apdorojamo elemento aukštis 150 mm viršuje: – metalinis, prispaudžiamasis volelis – agregatas (įpjautas guminis volelis kalibravimui + įvorė + metalinis volelis) – metalinis, lygus, slystantis volelis apačioje: – traukianti juosta – pneumatinė juostos osciliacija su fotoląstelėmis – elektrinis stalo pakėlimas – 2 posūvio greičio tipai – pagrindinis variklis 7,5 kW – posūvio variklis 0,6 kW – stalo pakėlimo variklis 0,18 kW – darbinis slėgis 8 bar – ištraukimo antgalio skersmuo 150 mm – matmenys (ilgis/plotis/aukštis) 1600x1250x2000 mm – svoris 1109 kg PRIVALUMAI – pagaminta Vokietijoje – komplekte yra papildoma įvorė – naudota šlifavimo staklė, labai gera būklė Isdpezdzi Eofx Aatoaw Grynasis kainos: 19 900 PLN Grynasis kainos: 4 738 EUR, priklausomai nuo 4,2 EUR kurso (Kainos gali keistis didėjant kursų svyravimams)

Gamybos metai: 2026, būklė: naujas, The destoning and pulping unit is ideal for processing fruit and vegetables. With interchangeable screens and an adjustable rotary rotor, stone fruits, pome fruits, as well as various berries and other fruits can be processed. The machine separates the pulp and the stones, each being discharged separately. Changing the screens is quick and easy. One screen is included as standard; additional screens can be ordered as needed. • Food-grade rubber wiper for hygienic processing • The gap between the screen and wiper can be individually adjusted • Machine feet with swivel castors and brakes for easy handling ⚙️ Technical Information • Rated capacity: up to 4,000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Screen sizes: • 0.8mm: berries, purée • 1.5mm: berries, purée • 3mm: apples, pear mash • 5mm: cherries • 8mm: plums, apricots • 10mm: peaches, mangoes Iajdpfxjv Srdto Aatew Dimensions: Length: 1,130 mm Width: 574 mm Height: 1,138 mm Weight: 125 kg

Gamybos metai: 2025, būklė: naujas, The IPW 100 batch pasteurizer is ideal for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), as well as pickled fruit and vegetables. Packaging must be heat-resistant, for example glass or heat-resistant plastic pouches. The precise temperature and duration of heat treatment depend on the specific product. Operation is manual. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Fully constructed from stainless steel (WNr. 1.4301) Technical specifications Capacity: 100 L/h Iasdpfx Aaov Srabotjw Power supply: 9 kW, 400 V, 16 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control panel Thermometer: 1 unit Dimensions: Length: 1,170 mm Width: 530 mm Height: 870 mm Weight: 75 kg

Gamybos metai: 2026, būklė: naujas, Fruit and Vegetable Washing System. The unit is constructed entirely from stainless steel. It features a sorting grid, a washing tank, and a conveyor belt. Produce drops into the water for initial cleaning. After pre-washing, the conveyor transports the fruit for further thorough cleaning with fresh water. The washed produce is then fed into the mill, where interchangeable sieves allow you to achieve the required mash consistency. The system is fitted with a dosing attachment suitable for pack presses. Technical Data: • Rated capacity: 1,500 kg/h • Power requirements: 3 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L/shift • Water consumption: 12 L/min • Water connection: 3/4" quick coupling • IP65 electrical control panel Isdjtu Ikcepfx Aatjaw • Swivelling grating mill • Equipped with lockable castors • Easy to clean • Conveying capacity can be precisely adjusted via frequency inverter Dimensions: Length: 3,250 mm Width: 840 mm Height: 2,270 mm Weight: 200 kg

Gamybos metai: 2026, būklė: naujas, The semi-automatic filler is the ideal solution for small businesses producing up to 5,000 Bag-in-Box units per year. The unit is equipped with an electromagnetic flow sensor, an electronic control panel for programming the filling volume (minimum 1 liter) and performing calibration, as well as a self-priming pump with rubber impeller EURO 20. At the start and end of the cycle, vacuum operation must be carried out by the operator, and nitrogen injection is managed via two manual pulse valves. Opening and closing of the tap is performed using the two standard stainless steel tools supplied. A drip collector buffer is included. The user selects the desired fill quantity and activates the switch to initiate the filling cycle. The filler executes a complete cycle: opening the valve / starting the pump / stopping the pump / closing the valve. • Touch screen operation for programming capacity and calibration • Digital flow meter max. 7,000 l/h • Stainless steel filling head • Pulse valve for manual nitrogen injection • Locking system for the filling head • Drip-free filling • Automatic start and stop • Dual semi-automatic system for connection opening and closing • Capability for filling flexible bags or pouches (tall or short type) from 1 liter capacity Iajdpfx Aaotpxtuotsw • S/S – Suitable for cleaning cycle (CIP) Technical Data: • Power supply: 220V 50-60 Hz • Suitable for: Ø 20 – 25 mm • Capacity: 5 L/h - 150 pcs • Capacity: 10 L/h - 100 pcs • Capacity: 20 L/h - 40 pcs

Gamybos metai: 2026, būklė: naujas, The semi-automatic filler is the ideal solution for small businesses producing up to 5,000 bag-in-box units per year. The system is equipped with: an electromagnetic flow sensor, an electronic control panel—for programming the filling volume (minimum 1 liter) and performing calibration—and a self-priming EURO 20 rubber impeller pump. At the beginning and end of the cycle, the vacuum must be operated manually by the user, and nitrogen injection is managed using two manual pulse valves. Opening and closing of the tap are performed with two standard stainless-steel tools supplied as standard. A drip-catcher buffer is included. The stainless-steel bag holder features adjustable height and is removable. The user selects the desired filling volume and activates the switch to start the filling cycle. The filler performs a complete cycle: opening the valve / starting the pump / stopping the pump / closing the valve. • Touchscreen control for programming capacity and calibration • Digital flow meter max. 7,000 l/h • Stainless steel table with adjustable and removable support, featuring 4 adjustable feet • Stainless steel filling head • Pulse valve for manual nitrogen injection • Locking system for the filling head • Drip-free filling • Automatic start and stop for an external pump • Dual semi-automatic system for opening and closing the connector • Suitable for filling flexible bags or pouches (high or low type) with at least 1 liter capacity Iedpfxotpxtio Aateaw • S/S – Suitable for CIP (Cleaning In Place) circuit Technical data: • Power requirements: 220V 50-60 Hz • Suitable for: Ø 20–25 mm • Capacity: 5 l/h 150 pcs • Capacity: 10 l/h 100 pcs • Capacity: 20 l/h 40 pcs • Dimensions: 740x900x720 mm • Weight: 50 kg

Gamybos metai: 2026, būklė: naujas, The large box tipper is ideally suited for emptying containers filled with root vegetables and fruit. Technical Information • Capacity: 25 cycles/hour • Load capacity: max. 1,000 kg/box • Power requirement: 2.2 kW, 230 V, 10 A • Container dimensions: 1200x1200x1000 mm • Powder-coated finish Dimensions: Iaodjw Ec E Hopfx Aatow Length: 2060 mm Width: 1600 mm Height: 1505 mm Weight: 415 kg

Gamybos metai: 2024, būklė: naujas, The pasteurizer is suitable for the thermal treatment of liquid, low-viscosity food products. The device is designed in accordance with food hygiene requirements. Heat treatment is performed via a heat exchanger equipped with a stainless steel tube coil. Thermal energy is supplied by a heating oil boiler. The temperature of the heating water is controlled by the boiler control system. The temperature of the treated liquid is regulated by a controlled switching valve. Temperature monitoring takes place at two points: once in the heating medium and once at the product outlet. The device automatically regulates the temperature of the heating medium. Operation is fully automated. If the temperature of the juice to be pasteurized falls below the set value, the device outlet is locked and the juice circulates in a bypass system until the set temperature is reached. Filling is then re-enabled by the device. After finishing work, the tube coil can be easily cleaned with a sponge ball system. The device requires minimal maintenance. ⚙️ Technical Information Capacity: 400 L/hour (heating from 20°C to 80°C) Power requirement: 1 kW, 230 V, 6 A Boiler output: 35 kW Fuel: Diesel or gas Material: AISI 304 stainless steel Dimensions: Length: 1820 mm Width: 620 mm Height: 915 mm Protection rating: IP65 Iasdpfsv Srw Tjx Aatow Connections: DN 25 Exhaust duct: 110 mm diameter Automatic temperature control Automatic bypass system Easy cleaning with sponge balls Low maintenance Options: Manual bag-in-box filling device Semi-automatic bag-in-box filling device 3-head bottle filling module Accessories: Sponge balls for cleaning

Gamybos metai: 2026, būklė: naujas, The pasteurization system is fully automated via industrial controls and a touchscreen interface. If the temperature of the juices to be pasteurized drops below the desired set point, the machine’s outlet side is shut off and the juice is routed through the bypass until the required temperature is restored. Filling can then be resumed. At the end of operation, the tube coil can be easily cleaned using a sponge ball. Our system is low-maintenance. Isdpfxev Srl Rs Aateaw ⚙️ Technical information Nominal output: 400 L/h Power requirement: 27 kW, 400 V, 40 A Material: WNr. 1.4301, AISI 304 stainless steel Water buffer: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Weight: 170 kg Optional with filling units

Gamybos metai: 2026, būklė: naujas, Manual bag-in-box filler with digital scale • Made entirely of stainless steel, including all fittings, floats, and nuts • Can be sterilized with steam • Capacity: 130 L/hour per filling nozzle • With mechanical float valve in the supply tank • Optional pump available ⚙️ Technical Information Output: up to 400 L/h Material: WNr. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Weight: 22 kg With bag-in-box filling system: 32 kg Iaedpfjv Srgbsx Aatjw Optional pump available

Gamybos metai: 2025, būklė: naujas, Stainless steel bottle filler with 3 filling heads The bottle filler with pump is made entirely of stainless steel. The filling machine is equipped with heavy-duty, industrial filling heads that enable automatic and adjustable bottling levels. The system is suitable for wine, beer, oil, detergents, and more. • Entirely made of stainless steel, including all fittings, floats, and nuts Ijdpfxov Srcis Aatjaw • Can be sterilized with steam • Capacity: 130 l/hour per filling tube • With mechanical float valve in the feed tank • 3 filling heads • Optional with pump This bottle filler comes standard with filling heads designed for fruit juice. ⚙️ Technical information Output: up to 400 L/h Material: WNr. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Weight: 22 kg With bottle filler: 28 kg

Gamybos metai: 2025, būklė: naujas, The IPW 200 immersion pasteurizer is suitable for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), as well as pickled fruits and vegetables. Packaging must be heat-resistant, e.g., made of glass or heat-resistant plastic pouches. The precise heat treatment technology, including temperature and duration, depends on the respective product. Operation is manual. The vat is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Fully made of stainless steel (WNr. 1.4301) Technical information Capacity: 200 L/h Power requirement: 12 kW, 400 V, 20 A Isdpsv Srblofx Aateaw Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control cabinet Thermometer: 1 pc. Dimensions: Length: 1420 mm Width: 600 mm Height: 880 mm Weight: 130 kg

Gamybos metai: 2026, būklė: naujas, The filler is made of stainless steel (AISI 304). The storage tank is located on top of the filler and can be connected directly to a pasteurizer via the DIN 25 connector. The electrical control unit is mounted on the side to facilitate easier operation. The bottle filler and the bag-in-box filler are connected via two separate valves and can be used either together or separately. Bag-in-box filler: Semi-automatic model IBB 200, with induction liter counter made of stainless steel. Filling system operates without gravity. Volumetric pump 1.1 kW with flexible EPDM impeller. Touch screen operation for cycle adjustment, parameters, and cleaning. Vacuum and nitrogen injection cycles are freely adjustable. The built-in air compressor ensures continuous operation. Technical data: Bag-in-box Electrical requirement: 1.1 kW 220V 50-60 Hz Compatible with: Ø 20 – 25 mm Capacity: 5 L/h 240 pcs. Capacity: 10 L/h 180 pcs. Capacity: 20 L/h 130 pcs. Collection tank capacity: 1500-1800 kg/h Iajdpfx Astpxuvoatsw Dimensions: 600x820x1600 mm Weight: 120 kg Filling system without gravity Collection tank capacity: 45 L Throughput: 670 L/h Dimensions: 580x1800x1500 mm Weight: 45 kg Feel free to visit our website!

Gamybos metai: 2026, būklė: naujas, Automatic Gravity Rotary Filter, equipped with a stainless steel pump for liquids. The filter comes with a 0.3 mm mesh screen, single-phase pump, level sensor, and control panel. - Material: Stainless steel AISI 304 - Frame: Stainless steel, mounted on 4 wheels - Single-phase power supply for the filter - Stainless steel centrifugal pump ENOS 20 - 0.3 mm filter Iaodpstpxqnjfx Aatow - Level sensor - Control panel with emergency stop button Technical data: Power consumption: 0.52 kW, single-phase Input height: 410 mm Capacity: 1,000 kg/h Dimensions: Length: 800 mm Width: 1,080 mm Height: 750 mm Weight: 70 kg Feel free to visit our website!

Gamybos metai: 2025, būklė: naujas, These containers are ideal for cideries and fruit pressing facilities offering contract pressing services. They allow you to serve multiple customers simultaneously and continuously, without needing to interrupt the pressing process. Using the valve controls, you can assign specific tanks to individual customers. Juice from different clients will not mix. Upon customer request, we manufacture containers in various sizes: 200 L, 500 L, 1000 L. Technical specifications: • Capacity: 300 L (3x100L) • Material: Stainless steel, grade Wnr. 1.4301, AISI 304 • With floating lid • Fill level indicator Dimensions: Iaedpetpxm Dofx Aatow • Length: 1,250 mm • Width: 508 mm • Height: 350 mm • Diameter: 398 mm • Total height: 1,100 mm • Tank height without legs: 850 mm • Leg height: 250 mm • Weight: 60 kg The dimensions refer to a single container! Feel free to visit our website!

Gamybos metai: 2026, būklė: naujas, Suitable for emptying containers with root vegetables and fruit. Technical Specifications • Capacity: 25 cycles/hour • Load capacity: max. 1,000 kg/crate • Power requirement: 2.2 kW, 230 V, 6 A • Container dimensions: 1200x1200x1000 mm • Powder-coated finish • Stainless steel hopper • Weight: 415 kg Iajdjv Sq Tyspfx Aatjw

Gamybos metai: 2025, būklė: naujas, SPECIAL OFFER! Washing Plant with Hammer Mill + Pitting System IWR2000 Washing plant with hammer mill for fruit and vegetables. The entire unit is constructed from stainless steel and features a sorting grate, wash tank, and conveyor belt. The produce drops into the water and, after initial washing, is conveyed by the belt, where it is thoroughly rinsed with fresh water. The cleaned fruit is then transferred to the mill, where various sieves can be used to achieve the desired pulp consistency. • Easy to clean • Minimal maintenance • Infinitely variable belt speed in both directions • Includes 2 swivel castors • Includes 2 fixed castors Technical specifications Rated capacity: 2,000 kg/h Power requirement: 3 kW, 400 V, 10 A Pulp discharge height: 1,400 mm Connection for wash tank: G 6/4” Connection for cleaning: G ½” Material: Wnr. 1.4301, AISI 304 stainless steel Water requirement: approx. 12 L/min Dimensions: Length: 2,700 mm Width: 840 mm Height: 2,270 mm Weight: 150 kg IPE4MAX The destoning and pulping unit is designed for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotary rotor for pulping or destoning stone fruit, pome fruit, and various berries and other fruits. Pulp and stones are discharged separately. Sieves can be changed easily and quickly. Supplied with one sieve; additional sieves are available to order. • Food-grade rubber scraper • Adjustable distance between sieve and scraper Iedpowcl Uljfx Aatoaw • Mobile machine feet/swivel castors with brake Technical specifications • Rated capacity: up to 4,000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear pulp • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1,130 mm Width: 574 mm Height: 1,138 mm Weight: 125 kg

Būklė: naujas, Gamybos metai: 2026, The fruit and vegetable washing machine is constructed entirely from high-grade stainless steel and features a sorting grid, a washing tank, and a conveyor belt. First, the produce is placed into the water, where it undergoes thorough preliminary cleaning. Subsequently, it is transported via the conveyor belt and is carefully rinsed with fresh water. Technical Specifications • Capacity: 1,000 kg/h • Power Requirement: 0.75 kW, 230 V, 6 A • Material: WNr. 1.4301, AISI 304 stainless steel • Water Connection: 3/4" quick coupling • Electric control cabinet with IP65 protection rating • High-quality workmanship • Fitted with castor wheels for mobility • Low maintenance requirements Dimensions: Length: 2,915 mm Width: 840 mm Height: 2,270 mm Iodpfx Aasv Srp Astoaw

Gamybos metai: 2026, būklė: naujas, The washing unit with integrated milling machine for fruit and vegetables is constructed entirely from stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruit is introduced into the water, where it undergoes a preliminary wash. Afterwards, the fruit is conveyed onward via the belt, which thoroughly cleans them using fresh water. After washing, the fruit is transferred to the mill, where it is processed with the desired screen to achieve the required mash consistency. • Easy to clean • Low maintenance requirements Iasdpfov Srguox Aatsw • Belt speed infinitely adjustable in both directions • Equipped with 2 swivel castors • Equipped with 2 fixed castors Technical specifications • Rated capacity: 2,000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1,400 mm • Connection for wash tank: G 6/4" • Connection for cleaning: G ½" • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2,700 mm Width: 840 mm Height: 2,270 mm Weight: 150 kg

Būklė: geras (naudotas), Note: A deep support frame is designed for crosswise storage of 2 Euro pallets, 2 mesh box pallets, or alternatively 2 IBC containers. Technical data for the deep support frame: Manufacturer: SSI Schäfer Version: Crosswise storage Scope of delivery includes: 01x Deep support frame, used Material colour: sendzimir galvanized For rack depth: 950 mm Clear support width: approx. 850 mm Beam support surface: approx. 50 mm Total width: approx. 2,680 mm Internal bay division: approx. 1,295 x 950 mm Cross connector: L: approx. 2,680 x 50 x 50 x 1.50 mm (LxWxH) Iaedpfjpr T Unex Aatew Support angle: L: approx. 950 x 150 x 50 x 3.00 mm (LxWxH) Your contacts in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information on the item: This item is only offered for collection. If transport or shipping is required beyond this, additional costs will apply, which can be requested from us separately depending on the place of delivery or scope of delivery.

Būklė: naujas, Gamybos metai: 2024, Model variants: Hammel, Arjes, Lindner Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 Iodjr Nf Rlspfx Aatsaw VB 950 6-8-8 / 10-8-8 / 10-10-10 AT-TEC Recycling Solutions GmbH is a metalworking company specializing in the manufacture of shredding tools for shredder machines, with an integrated welding shop. Our experienced team takes pride in providing high-quality, tailor-made solutions. We focus on quality, innovation, and customer satisfaction to ensure that our products fully meet our customers’ requirements. Our customers come from a wide range of sectors, including waste management, recycling companies, and machinery manufacturers. We maintain long-term partnerships and are pleased to supply our products and services to companies seeking reliable and high-performance shredding solutions.