Dms Rl70120 Rotatorlöffel Drehbar / Ms03 / 1.200 Mm pirkti naudotą (82 654)

Būklė: naudotas,

Būklė: naudotas,

Būklė: naudotas,

Būklė: naudotas,

Būklė: naudotas,

Būklė: geras (naudotas), Į komplektą įeina: 1 vnt. gilusis rėmo elementas, naudotas Medžiagos spalva: cinkuotas „Sendzimir“ būdu Bendras ilgis: apie 1250 mm skirtas lentynų gyliui: 1200 mm laisvas atramas atstumas: apie 1100 mm skersinių atrama: apie 50 mm atramos kampas: L: apie 80 x 80 mm bendras plotis: apie 860 mm vidinis plotis: apie 855 mm medžiagos storis: apie 3 mm Klsdpfx Asr Dr Sujc Njw Šoninis rėmas: Ilgis: apie 1245–1070 mm priekyje – įstrižai Plotis: apie 200 mm Aukštis: apie 195 mm Galinis stabdys: Plotis: apie 200 mm Aukštis: apie 195 mm Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas Andre Evering Ponas Mario Klöver Ponas Falk Deutsch Bendroji informacija apie prekę: Tai naudota prekė, ant jos gali būti įbrėžimų, įlenkimų ir kitų naudojimo žymių. Ši prekė siūloma tik atsiėmimui. Jei pageidaujate, kad prekė būtų pristatyta, taip pat galimas siuntimas, tačiau tai kainuos papildomai. Kainą priklausomai nuo pristatymo vietos arba pristatymo apimties galima sužinoti atskirai.

Būklė: geras (naudotas), Included in the scope of delivery: 01x Rear wall mesh panel, used Material color: cream white Overall width: approx. 2,200 mm Overall height: approx. 1,200 mm Mesh size: approx. 60 x 50 mm Frame profile dimensions (width): approx. 20 x 20 mm Frame profile dimensions (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Kjdpfx Acem E I Nve Nolw Weight per piece: approx. 8.14 kg Internal designation: RW-2

Būklė: geras (naudotas), Jūsų kontaktai mūsų įmonėje: Ponas: Andre Evering Klsdpsx Huh Asfx Ac New Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiėmimui vietoje. Jei pageidaujama prekės transportavimo ar siuntimo, taikomi papildomi mokesčiai, kuriuos galima atskirai sužinoti pagal pristatymo vietą ar apimtį.

Būklė: labai geros būklės (naudotas), Technical data for the picking rack: Rack system: Dexion Type: HI280 Technical data for setup: Number of rack rows: 01 pc. Rack length: approx. 1,340 mm Number of bays / rack row: 01 pc. at 1,290 mm Number of levels incl. base level: 06 pcs. Note: The advantage of a packing table or a picking rack is that all tools and accessories required for product assembly are always within easy reach. Ksdpjn Smvhsfx Ac Nelw Scope of delivery includes: 02x upright frames, used Material finish: Sendzimir galvanized Frame profile dimension: 50 x 55 mm Adjustment pitch: 25 mm incl. horizontal and diagonal bracing Weight / pc.: approx. 5.50 kg The uprights are pre-assembled 1,200 mm high 610 mm deep 06x shelf panels, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pc.: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x shelf beams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight / pc.: approx. 0.84 kg Material finish: Sendzimir galvanized 48x open front storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight / pc.: approx. 0.785 kg 01x load capacity sign with field and shelf load specifications, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Note: Please note that these are used goods. Damage, surface rust or similar may be present. General information about the item: This item is only offered for collection. If transport or shipping of this item is desired, additional costs will apply. These can be requested from us separately depending on place of delivery and scope of delivery.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany Kledpfsmhhypsx Ac Nsw - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard Kedemhh Dhepfx Ac Njlw - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) Kedpfx Asmhhx Iec Njlw - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Klsdpsmhh Anjfx Ac Nsw - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm Klsdpfx Acoh Ek Das New - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. Ksdomhhf Sspfx Ac Njlw We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Kledpfemhhl Hex Ac New Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany Kodpfjmidyfjx Ac Nelw - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. Klsdpfxomkixws Ac Njw The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Kodpfomhh Dtsx Ac Nslw Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: naudotas, Gamybos metai: 2022,

Būklė: naujas, 🧰 Produkto ypatybės • Būklė: nauja • Spalva: pilka • Medžiaga: metalas • Išoriniai matmenys: 124 x 83,5 x 97 cm • Vidiniai matmenys: 120 x 80 x 80 cm • Apkrova: 1500 kg • Sukrauta apkrova: 6000 kg • Svoris: 78 kg • Priekinė pusė: atlenkiama • Dugnas: lakštinio metalo su medine įdėkle 💰 Kaina: 149 € be PVM perkant nuo 50 vnt. – 129 € be PVM • Kiekio nuolaida: pagal užklausą • Pristatymo išlaidos: visoje Europoje pagal užklausą • Pristatymo laikas: galima pristatyti iš karto Kjdpodiyhxofx Ac Nslw • Apžiūra ir atsiėmimas: galima bet kada su išankstiniu susitarimu Nuolat sandėlyje daugiau nei 5000 lfm padėklinių stelažų iš įvairių gamintojų (Techniniai duomenys, informacija ir kainos gali būti keičiami, galimi netikslumai! Žr. mūsų bendrąsias sąlygas, visos kainos be PVM, atsiimant iš sandėlio.)

Būklė: naudotas, ---- Modelis: MS03 Ksdpfx Aszkzdcjc Nslw Pjovimo plotis: 600 mm

Būklė: geras (naudotas), - 1 pc. Jaw Crusher Metso / Lokomo MK 120, 1,200 x 900 mm. With feed hopper. With drive. Including spare parts: pitman, flywheels, jaws, cheek plates, bearings, springs, etc. More detailed information can be found in the PDF below. Kljdpfx Acslf Iqco Now

Būklė: naujas, We offer you here a new workbench from the manufacturer Metal Sistem for purchase. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Klsdshq Txhopfx Ac Now Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench uprights, new Material finish: fully galvanized Upright type: TS4 incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) 723 mm height 700 mm depth 04x workbench beams, new Beam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material finish: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimension: 900 x 1,200 mm Material color: black 03x steel shelf inserts, new Dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x braked swivel castors, new 01x angle bracket set, new for mounting the worktop 08x safety hooks, new Material finish: fully galvanized

Būklė: naujas, We offer you here a new workbench from the manufacturer Metal Sistem for purchase. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Scope of delivery includes: 02x workbench stands, new Material color: fully galvanized Stand type: TS4 incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 888 mm high 700 mm deep 04x workbench beams, new Beam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimension: 900 x 1,200 mm Ksdpjhq Twysfx Ac Nolw Material color: black 03x steel shelves, new Dimension: 300 x 700 mm Type: H29/D 01x angle bracket set, new for mounting the worktop 08x safety hooks, new Material color: fully galvanized