Beco Pz2 pirkti naudotą (217)

Būklė: naudotas, Gamybos metai: 2012, Transnorm Belt Curve Conveyor, right-hand 90°-885-700-IR400 RA1830 The Transnorm belt curve conveyor is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curve conveyors are frequently used in intralogistics for the in-house transport of unit goods and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are easily managed. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. Technical Data: Dwjdpfxsqy Sgce Aaioa Model: Belt curve conveyor Conveying length (middle radius, NL): 1178 mm Frame width (NB): 885 mm Belt width (GuB): 700 mm Motor height (MH): 370 mm Overall height (BH): 170 mm Inner radius (IR): 400 mm Conveying angle: 90° Conveying speed (v m/s): 0.217 m/s Drive: SEW geared motor Electrical data: 50Hz V230/400, kW 0.25 /S1 Belt: (wear condition as seen in images) Year of manufacture: 2012 Optionally available: Support stands Single-sided and double-sided side guides Frequency converter Prices are net, plus VAT, ex central warehouse of Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For individual, professional advice, please contact us. Reach out via phone or email. We are happy to support you in planning and implementing your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Būklė: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery, but are optionally available upon request. Belt curves are frequently used in intralogistics for in-plant transport of unit goods and have become indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are not a problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken in its installed state in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length, middle radius (NL): 3900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Conveyor height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Special features / accessories: side guides included on both sides Optionally available: - Support stands - Side guide on one or both sides Dwedpsk Aa T Rsfx Aaisa Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you with the planning and realization of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG your expert partner for intralogistics.

Būklė: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor 70° Left GKF 70°-770-600 IR600 RA1415 The Transnorm belt curve is in good (used) condition and fully operational. It is equipped with a SEW brand geared motor. Support stands are not included but are available as an optional extra upon request. Belt curve conveyors are commonly used in intralogistics for in-plant transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for performance and reliability. Thanks to low-tension drive across the entire belt width, long operating hours are not an issue. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. Technical data: - Conveyor length (center radius – NL): 1100 mm - Frame width (NB): 770 mm (with motor: 940 mm) - Belt width (GuB): 600 mm - Overall height (BH): 210 mm - Inner radius (IR): 600 mm - Conveyor angle: 70° - Support feet: optionally available - Conveyor speed (v m/s): 0.8 m/s, frequency converter available at extra cost - Drive: SEW geared motor SA47/T DT80N4 - Electrical data: 50Hz V220-240, kW 0.75 / S1 - Year of manufacture: 2001 Dedpfxjk Abf Uo Aaijwa - Special feature / accessories: single-sided side guides included Optionally available: - Support stands Prices are net plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, please feel free to contact us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact partner for intralogistics

Būklė: naudotas, Gamybos metai: 1996, RA1019 Djdpfx Aajk Aa Acsijwa Transnorm belt curves are frequently used in intralogistics for in-house transport of unit loads and have become indispensable in modern distribution centers. They stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, extended operating times are no issue. Tapered drums and a specially designed belt guiding system ensure maximum running smoothness. For tailored, professional advice, simply get in touch with us. Contact us by phone or email—we will be happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team – Your Specialist and Point of Contact for Intralogistics

Būklė: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor, Left-Hand GKF 45°-750-550 IR700 RA1390 The Transnorm belt curve conveyor is in good condition (used) and is fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are available as an option on request. Belt curves are frequently used in intralogistics for internal transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-strain drive across the entire belt width, they are designed for prolonged operating times. Conical drums and a specially developed belt guidance system ensure maximum running smoothness. The images shown depict the conveyor system in its installed condition in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 766 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 700 mm Djdpfsk Aa T Hex Aaiswa Conveying angle: 45° Support legs: optionally available Conveying speed (V m/s): 0.03–1.05 m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz, v380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Optional extras: Supports Side guides (single-sided or double-sided) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, please do not hesitate to contact us directly by phone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Team at Dr. Sonntag GmbH & Co. KG Your partner and specialist for intralogistics

Būklė: paruoštas naudoti (naudotas), Gamintojas: Beck -Išoriniai matmenys: 1700x1010x1400 mm -Praeinamas skerspjūvis: 540x240 mm -Temperatūros diapazonas: 0–400 °C Dwodeu Nuyijpfx Aaisa

Būklė: naujas, Gamybos metai: 2025, PLA-65A PLASMA CUTTING MACHINE Dodpfefwmrpsx Aaijwa A machine capable of fast, precise, and high-quality cutting up to 25 mm, specifically developed for manufacturers of ventilation ducts, sign makers, and customers working with thin sheet metals. Combined with its economical price, this CNC plasma cutting machine, equipped with ergonomic features, has become an indispensable aid for most customers in this industry. Technical Specifications: Plasma Source: Hypertherm Powermax Power: 65A Maximum Power Consumption: 11 kW Cutting Speed: 20 m/min Working Area X/Y/Z: 1500 x 3000 mm Weight: 1000 kg Noise Level: 69 dB(A) Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source – Hypertherm Powermax 65A CNC Controller + THC PC Computer

Gamybos metai: 2026, būklė: naujas, Working width 950 mm Workpiece thickness - max. 1.0 - 50 mm Abrasive belt width 970 mm Abrasive belt length 1900 mm Dwedpfx Aevfhm Doaioa Machine weight approx. 1.8 t The SMD 123 RE is a universal entry-level machine for deburring, all-round uniform edge rounding, and surface grinding of sheet metal in dry processing. * Suitable for processing steel, stainless steel, and aluminum. * The non-slip conveyor belt ensures safe transport and processing even of small workpieces. * The two rotor heads guarantee all-round consistent edge rounding and a non-directional finish. * Intuitive operation via touchscreen enables any user to quickly become familiar with the machine. * SMD 1 models can be installed and put into operation in a short time. * The compact design saves valuable production space. * Low acquisition and operating costs lead to short payback periods and guarantee economical processing of your workpieces. Consisting of: - SMD 123 RE grinding machine (kit): - SMD 123 RE conveyor belt cleaning system - SMx xx3 - abrasive belt +120 Cubitron II, W=970, L=1900 - SMD 1x3 set of 3-piece brush roller drums P120 - DDE 3002 dry extraction unit - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data available on request. The machine is available immediately from stock Niederlangen.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 120 kg, bendras ilgis: 900 mm, bendras plotis: 1 500 mm, bendras aukštis: 2 050 mm, įėjimo įtampa: 230 V, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, kartojimo tikslumas: 0,01 mm, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, Įranga: USB jungtis, apšvietimas, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a broad range of marking applications. With its integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, laser technology has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and part numbers can be automatically incremented by the software once previously set. In addition, the software can read data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with a Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side-mounted arms for long workpieces, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes optional) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic determination of focal distance • Optional: extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp for operating status indication • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and adjustable keyboard tray Dwodsyxccrjpfx Aaija • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Connection 230V • Dimensions approx. 900 x 800 x 1900 mm (LxWxH) • Weight approx. 120 kg

Gamybos metai: 2026, būklė: naujas, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous Capacity: 400 kg/h Dwedpfxsflpnyj Aaioa The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our belt press is ~75 %. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Dedpfx Ajfz A Ilsaiswa Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Dwsdpfxofzktzs Aaija Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. Dedpfx Aofz I Eheaiowa From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Gamybos metai: 2020, būklė: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Dwodpfxsfz A Iwj Aaisa Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Būklė: geras (naudotas), Gamybos metai: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used - : Price ex location: €23,500 (net)! Manufacturer: MECANUMERIC Model: MECA EASY 1510 Year of manufacture: 2015, former DEMONSTRATION MACHINE Three-axis milling machine in flatbed gantry design. Travel distances X-, Y-, Z-axis: 1,050 / 1,550 / 200 mm. Machine table frame (gantry): Constructed as a robust, stress-relieved, fully welded steel structure, powder-coated. Heavy-duty table substructure for supporting the VAC-CAISSON vacuum table, cassette type design, air passage boreholes in a 10 mm grid pattern. Feed speed: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Linear guide rails, carriage units with preloaded recirculating ball bearings. Drive: Precision recirculating ball screw drives Ball screw drive on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeatability: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Dwjdpszbybiefx Aaisa Machine operation via a 10” touchscreen display Complete design and CE Declaration of Conformity according to the essential safety and health requirements of the EC Machinery Directive. Vacuum table 1,020 x 1,500 mm Carrier working table designed as a closed aluminium plate, with vacuum through holes in a 10 mm grid across the surface. The table is divided into 2 main zones, which can be activated manually. Vacuum is generated by a (1) two-stage, high-performance side channel vacuum blower. Motor power 4.5 kW, suction capacity 320 m³/h, filter and silencer included. Due to the size and possible heat generation, the pumps are situated outside the machine frame. Electrical controls and safety switches for pump and valves are integrated in the machine control cabinet and operator panel. Milling spindle HF40-ATC24 ENC Retrofitting Module APSG-A Vacuum generation is via a (1) two-stage, high-performance side channel vacuum blower. Motor power 4.5 kW, suction capacity 320 m³/h, with filter and silencer. Because of the overall size and potential heat development, pump installation is outside the machine frame. All electrical control and safeguarding functions for pump and valves are integrated into the machine control cabinet and operator panel. High-frequency spindle motor 4 kW Power: 4 kW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool clamping capacity: shank diameter 2-16 mm. Cooled by compressed air 6 bar, 20 m³/h This position includes inverters and switching components. Safety enclosure of the machine Front side with door and safety lock - PROTCHOC position omitted - Preparation of electrical control and switching elements and the output socket for a high-performance industrial vacuum cleaner. Tool changer CH 6 S Condition: good Availability: immediately Location: Delmenhorst

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Gamintojas: Grafisk Maskinfabrik A/S, Danija Modelis: GM DC330 V8-BX Pavadinimas: Konversijos linija Pagaminimo metai: 2019 Medžiagos plotis: 333 mm Maksimalus greitis: apytiksliai 50 m/min Įtampa: 3 x 400 V + N + PE Maksimali apkrova: 32 A Dažnis: 50/60 Hz CE atitikties sertifikatas: Taip Vieta: Vokietija Prieinamumas: 2026 m. rugsėjo pabaiga Pagrindinė konfigūracija: • Atvyniavimo įrenginys, 3 colių šerdis / 76 mm • Tinklelio valdymo sistema • Fleksografinis spausdinimo / lako dengimo įrenginys • Laminavimo įrenginys • Folijos dengimo įrenginys • GEW UV džiovinimo įrenginys • Išankstinio pašildymo įrenginys tonerio naudojimui / siekiant sumažinti tonerio įtrūkimus • Pusiau rotacinis štampavimo įrenginys su „Kocher & Beck GAP“ funkcija • Apytiksliai 25 colių magnetinis cilindrų sistemą, naudojamas formatas apytiksliai 22 coliai • Matricos atvyniavimas • Atbulinis įspaudimas • Pjovimo įrenginys su žirklėmis • Du atvyniavimo velenai, 3 coliai • Valdymas per lietimui skirtą ekraną • Tinka nepertraukiamai veikiančiai gamybai (nuo ritinio iki ritinio) Djdozkarrspfx Aaijwa Papildoma įranga: GM buferis • Būklė: Vizualinė būklė: 8/10 Techninė būklė: 8/10 Šiuo metu mašina vis dar veikia ir gali būti apžiūrėta, kai ji įjungta. Remiantis turimomis nuotrakomis ir informacija, mašina atrodo geros, švarios ir gerai prižiūrėtos būklės. Prieš perkant rekomenduojama atlikti galutinę techninę apžiūrą ir bandomąjį paleidimą.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, 1 pc. Used IML system with extraction unit, deposit onto conveyor belt for horizontal stacking Manufacturer: Beck Automation AG Model: B32 Dwedpswuln Njfx Aaioa Year of manufacture: 2019

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 6 000 kW (8 157,72 AG), bendras svoris: 3 700 kg, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, It’s time to boost your production efficiency by 1.5 times! The Wattsan 1530 Tablechange laser cutter can process materials up to 15 mm thick, including stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. Dodoiicv Sopfx Aaijwa This CNC metal laser cutter is equipped with two interchangeable worktables, each measuring 1500x3000 mm. The precision Wattsan 1530 loading rollers make material handling easy. Overall, manufacturing efficiency is increased, as there is no wasted time loading and unloading parts. For more details, feel free to call our managers! Features of the Wattsan 1530 Tablechange: Work area: 1500x3000 mm Laser power: up to 6000 W Weight: 3600 kg Virmer not only offers top-quality machines, but also provides service and delivery. Our engineers and managers are ready to answer any questions and offer video support as needed. In addition, Wattsan device owners receive lifetime online support. Virmer is based in the Netherlands and operates all across Europe. Virmer is the official supplier of Wattsan. Our portfolio includes not only laser engravers, but also metal cutters, welding machines, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and constantly evolves thanks to customer feedback. With over 50 upgrades implemented based on user input, Wattsan machines have become more reliable, precise, and powerful—so you can take your business to the next level. CONTACT US BY PHONE OR EMAIL! WE WILL CHOOSE THE RIGHT MACHINE FOR YOUR TASK Are you looking for the right laser or CNC milling machine? We are happy to assist you. We offer a wide selection of laser machines and equipment: CO2 laser machine; metal laser cutter; metal laser cutting machine; fiber metal laser; fiber laser engraving machine for metal; CNC metal milling machine; wood milling machine; CNC milling machine; laser engraving machine; laser engraver; plywood laser cutting machine; laser engraver; laser metal cutting machine; CNC milling machine; laser marker; lenses; chillers; machine cooling systems; S&A chillers; IPG laser, MAX Photonics, Raycus; compressor; rotary device; laser machine mirrors.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 4,5 kW (6,12 AG), ašių skaičius: 3, bendras svoris: 880 kg, stalo ilgis: 2 500 mm, stalo plotis: 1 300 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, Universal CNC router for cutting, engraving, and 3D milling of any desired shape. This model is capable of producing half of the furniture components needed for kitchens and living spaces. The user-friendly Wattsan CNC milling machine is ideal for medium to large-scale production, providing precise and reliable operation. The planetary gearbox of the Wattsan M1 1325 allows for easy machining of hardwood and soft metals. Additionally, a vacuum table can be installed to ensure rock-solid workpiece fixation. With a Wattsan milling machine, you can process metal, hardwood, plastic, foam, aluminum, and acrylic glass. Contact our managers for more details! Features of the Wattsan M1 1325: - Working area: 1300x2500 mm - Spindle: 4.5 kW - Machine dimensions: 2080 x 3100 x 1890 mm - Weight: 690 kg Virmer not only provides top-quality machines, but also offers service and delivery. Our engineers and managers are ready to answer any of your questions and can provide video support if needed. Additionally, owners of Wattsan equipment receive lifetime online support. Dwodpforywfnox Aaija Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We offer not only laser engravers, but also metal cutters, welding equipment, marking machines, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years and continues to improve its products with the help of customer feedback. Thanks to over 50 customer-driven upgrades, Wattsan machines have become more reliable, precise, and powerful, allowing you to elevate your business to the next level. YOU CAN CALL OR WRITE TO US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR REQUIREMENTS If you are looking for the right laser or CNC milling machine, we are happy to assist you. You will find a wide selection of laser machines and equipment with us: CO2 laser machines; metal laser cutting machines; metal laser cutters; fiber metal lasers; fiber metal laser engraving machines; CNC milling machines for metal; woodworking milling machines; CNC routers; laser engraving machines; laser engravers; plywood laser cutters; laser engravers; metal laser cutting machines; CNC milling machines; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary devices; mirrors for laser machines.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 4,5 kW (6,12 AG), ašių skaičius: 3, bendras svoris: 730 kg, stalo ilgis: 1 600 mm, stalo plotis: 1 600 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, This is a mid-sized CNC router designed for cutting, engraving, and 3D milling applications. It is capable of processing plywood, wood, MDF, chipboard, acrylic glass, plastic, non-ferrous metals, and aluminum. This equipment ensures efficient operation around the clock. The Wattsan M1 1616 comes standard with a 4.5 kW spindle. The machine features a working table of 1600x1600x200 mm. Its reinforced gantry allows the use of 1 to 12 spindles, enabling the machining of even heavy workpieces. For further details, please contact our managers! Features of the Wattsan M1 1616: - Working area: 1600x1600 mm - Spindle: 4.5 kW Dwsdjrywhujpfx Aaioa - Machine dimensions: 2300x2140x1780 mm - Weight: 590 kg Virmer not only supplies top-class machinery but also provides full service and delivery. Our engineers and managers are available to answer all your questions and can provide video support if required. Additionally, owners of Wattsan equipment benefit from lifelong online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan equipment. We supply not only laser engravers, but also metal cutters, welding machines, markers, and cleaning equipment. Wattsan is a Chinese manufacturer with nearly 15 years of experience in laser machinery, constantly improving its products based on customer feedback. With more than 50 upgrades thanks to client input, Wattsan machines have become more reliable, precise, and powerful, enabling you to take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION If you are looking for the right laser or CNC milling machine, we are happy to assist you. You will find a wide range of laser machines and accessories with us: CO2 laser machine; metal laser cutting machine; laser metal cutter; fiber laser; fiber laser engraving machine; CNC milling machine for metal; woodworking milling machine; CNC router; laser engraving machine; laser engraver; laser cutting machine for plywood; laser engraver; metal laser cutting machine; CNC milling machine; laser marker; optics; chillers; machine cooling systems; S&A chiller; IPG Laser, MAX Photonics, Raycus; compressor; rotary device; mirrors for laser machine.

Gamybos metai: 1991, būklė: labai geros būklės (naudotas), Manufacturer: Beck HV600 Maximum Throughput: 650 x 300 mm Maximum Temperature: 350 °C Continuously variable speed adjustment, forward/reverse. 400V, 50Hz, 28A Housing dimensions: 2500 x 1100 x 1500 mm (L x W x H) Dwodpfxomv E Icj Aaioa

Gamybos metai: 1988, būklė: labai geros būklės (naudotas), Manufacturer: Beck Max. throughput: 660 x 180 mm Max. temperature: approx. 300 °C Infinitely variable speed adjustment, forward/reverse. 400V, 50Hz, 28A Dodpfx Asmv Hy Hsaijwa Housing dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Siūloma horizontali šoninio sandarinimo įvyniojimo mašina Hugo Beck. Plėvelės padavimas: ritinys, didž. plėvelės plotis: 500 mm, juostos plotis: 550 mm, didž. plėvelės ritinio skersmuo: 350 mm, min. gaminio ilgis: 100 mm, gaminio pločio intervalas: 10–450 mm, didž. gaminio aukštis: 250 mm, našumas: 100 ciklų/min, didž. mechaninis greitis: 28 m/min. Mašinos matmenys (I/P/A): apie 2250 mm / 1500 mm / 1300 mm, svoris: apie 750 kg. Dokumentacija yra. Apžiūra vietoje galima. Djdpfxezc Rfbe Aaijwa

Būklė: naujas, Gamybos metai: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free: Special offer exclusively for customers who participated in a demonstration before purchase – at the Otinus Machinery Showroom in Bydgoszcz. Handheld Laser Cleaner “3000W LCH-3000-N” The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to vaporize or dissolve. Laser cleaners are used across various industries, from automotive to heritage conservation. These devices stand out for their high efficiency, minimal waste output, and limited interference with the surface of the object being cleaned. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective. The following services are included in the machine price: A 1-day training and machine installation, up to 8 hours – installation and training on the control unit. Your Choice of: MAX Photonics The brand "MAX Photonics" was established in 2004. The company's roots are in the manufacture of light and optical sources for scientific institutes. Ensuring quality and product reliability was set as the top priority. The company quickly recognized that the future of laser technology is closely tied to fiber optics. Research and development initiated in 2007 led to the launch of their first 500-CW source in 2014. Since then, the company has been intensively developing its technologies in the areas of laser cutting, welding, marking, and engraving. MAX Photonics currently offers sources with power output up to 40,000 W, and is striving to become a leader in the production of ultra-high-power industrial lasers. Raycus The company “Wuhan Raycus Fiber Laser” was founded in 2007. It focused on independent research and development, benefitting from mergers with other companies. Raycus produces laser sources for a wide range of applications, including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries. Dsdjr Eqbyopfx Aaiowa

Būklė: naujas, Gamybos metai: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free: Special offer valid only for customers who participated in a demonstration before purchase – at the Otinus machine showroom in Bydgoszcz. Handheld Laser Cleaner "1500W LCH-1500-N" Dsdpfothitpsx Aaiswa The laser cleaner is an innovative machine for precise and effective surface cleaning. It focuses a laser beam on contaminations, causing them to evaporate or dissolve. Laser cleaners are used across various industries, from automotive to historical preservation. These machines are characterized by high efficiency, minimal waste, and limited interference with the surface of the cleaned object. Compared to traditional cleaning methods, a laser cleaner can be more precise and cost-effective. The following services are included in the machine price: A one-day training and machine installation, up to 8 hours – installation and training on the controller system. Choice of Options MAX Photonics The brand "MAX Photonics" was established in 2004. Its roots lie in the production of light and optical sources for scientific institutes. Product quality and operational stability have been set as their top priorities. The company soon realized that the future of laser technology is closely linked to fiber optics. Research and development started in 2007, leading to the market introduction of their first 500-CW source in 2014. Since then, the company has been intensively expanding its technologies in laser cutting, welding, marking, and engraving. Today, they offer sources with output up to 40,000 W. Currently, the company aspires to become a leader in the production of ultra-high-power industrial lasers. Raycus "Wuhan Raycus Fiber Laser" was founded in 2007. The company focuses on independent research and development, also drawing on its partnerships with other enterprises. They manufacture laser sources for a wide range of applications – including cutting, welding, soldering, marking, and engraving. Devices of this brand are utilized in the automotive, aerospace, medical, electronics, and advertising industries.