Užglaistymo mašina

LISSMAC SMD 123 RE

Būklė: naudotas, Gamybos metai: 2025, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SN078146, 12 mėnesių garantija / 1800 darbo valandų Fjdoxp Nd Iopfx Ahwopd

Būklė: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Fpsdjd Ev Upspfx Ahwod Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Svoris 4950 kg, bendras svoris 12000 kg Galia 5,5 kW Fjdpewpmcksfx Ahwepd

Būklė: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Fpjdsnah Taopfx Ahwjd This machine is suitable for heavy-duty applications. With its fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide-belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optional with magnetic holding system. By using 3250 mm long abrasive belts, you achieve a uniformly smooth surface and reduce consumable costs due to the belts’ longer service life. Thanks to the modular machine design, it is possible to offer the optimal configuration for the customer’s specific processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and surface finishing. Please contact us for more information and images via mail(at) or

Būklė: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Fedpfx Aod Ixadshwopd Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 550 mm, tekinimo skersmuo virš slankiojančio stalo: 1 550 mm, tekinimo skersmuo virš viršutinio vežimo: 1 220 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 600 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Fpodpfsv Ab Dqox Ahwsd Availability: Overhaul on order, delivery time 3.5 months from order confirmation. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Overall weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes with display, including installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post - Full-length rear safety guard - Inverter including soft-start function and potentiometer for stepless speed control

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, Mold carriers: 42, Additive mixing stations: 10, Mixing head type: MQ, max. operating pressure: 180 bar, pressure vessels: 330 bar. Foam types: rigid foam, integral rigid foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Complete documentation is available. An on-site inspection is possible. Fodpfxottbd Ns Ahwopd

Būklė: naujas, Gamybos metai: 2025, - TFON Kantenverrundungs- und Oberflächenreinigungssystem. -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl. Fjdpjhq A T Uofx Ahwspd -Arbeitsdickenbereich: Verarbeitet Materialstärken von 0 bis 120 mm. -Kantenverrundung: Erzielt eine Radius-2 Kantenverrundung für gleichmäßig glatte und sichere Kanten, die sowohl das Erscheinungsbild als auch die Funktionalität des Werkstücks verbessern. -Präzise Steuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für präzise und gleichbleibend genaue Prozesssteuerung. -Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielseitige Anwendungen – unterschiedliche Arbeitsschritte können gleichzeitig oder nacheinander ausgeführt werden. -Tischoptionen: Arbeitsbereiche mit 650 mm, 1000 mm oder 1300 mm Tischbreite, abgestimmt auf spezifische Produktionsanforderungen. -Tischtypen: Flexible Konfigurationen wie Magnet-, Vakuum- oder Magnet-Vakuum-Tische gewährleisten sicheren Halt unterschiedlichster Materialien und Werkstückgrößen. -Plasma- und Sauerstoff-Technologie: Modernste Plasma- und Sauerstoffverfahren sorgen für effektive Entfernung von starken Graten und Schlacke nach dem Schneiden und liefern sauberere, glattere Oberflächen. -Oberflächenreinigung: Entfernt effizient Oberflächenverunreinigungen wie Rost, Oxid und Zunder und bereitet die Teile optimal für weitere Bearbeitungsschritte vor. -Kantenverrundung für die Beschichtung: Ermöglicht eine perfekte Vorbereitung für Lackierung und Beschichtung durch eine einheitliche, fehlerfreie Oberfläche. -Einsatzbereiche: Ideal für Stahl-Service-Center, Energie-, Bergbau-, Bau- und Automobilbranche. Bietet individuelle Lösungen für anspruchsvolle Industrieanwendungen. -Uniforme Resultate: Sechs Lamellenräder sorgen für gleichmäßige, einheitliche Kantenradien an allen Werkstücken. -Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder durch reduzierten Verschleiß und gewährleistet dauerhaft konstante Ergebnisse.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 400 V, darbinis plotis: 1 100 mm, bendras svoris: 1 300 kg, ruošinio plotis (maks.): 600 mm, suslėgto oro jungtis: 6 juosta, maks. lakšto storis: 40 mm, ankstesnių savininkų skaičius: 1, aukščio reguliavimo tipas: elektrinis, stalo ilgis: 3 000 mm, stalo aukštis: 850 mm, stalo plotis: 600 mm, garantijos trukmė: 3 mėnesiai, Operating mode: dry Application description: deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating instructions: 1x manual Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Fjdpfxew U A Dms Ahwopd Planetary head station with 3 units: Planetary head design with 6 tools per unit, drive 1.3 kW per unit; speed frequency-controlled 100-300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (highly wear-resistant version) Workpiece thickness: 0.8 - 40 mm Constant working height: 850 mm Compressed air connection: 6-7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed 0.5–5 m/min, frequency controlled, automatic workpiece thickness adjustment with start switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit locking, belts replaced – machine is fully operational and in very good technical condition. Set according to the manufacturer's specifications/standards. Sale includes a 3-month mechanical functional warranty from delivery.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, FAT TUR 630AMN x 2000 CNC Siemens 840D Rok produkcji: 2010 Fsdpfsw Ecuuox Ahwopd Średnica toczenia: 630 mm Średnica toczenia nad suportem: 370 mm Długość toczenia: 2 000 mm