2011 Scm Sigma Impact 107 pirkti naudotą (3 876)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scoring unit Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system with magnetic strip and LCD display. Cross-cut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm 3200 Main saw blade diameter mm 450 Scoring blade diameter mm 120 Panel cuts with extendable fence mm 3200x3200 Tilting range degrees 0°/ +46° Max. saw blade cutting height at 90° mm 150 mm Max. saw blade cutting height at +45° mm 130 Saw blade speed rpm 2500, 3500, 5000 Scoring blade speed rpm 9000 Extraction port diameter mm 120 & 100 Main motor power Hz 50 kW 7.5 Scoring unit power Hz 50 kW 0.75 Djdjyftzkepfx Ahreuw Cutting width with parallel fence mm 1270 Weight approx. 1180 kg Note on used machines: • Errors in technical specifications and prior sale reserved. • The listed prices are ex works, loaded free of charge. • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no warranty whatsoever. Buyers are free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only respond to inquiries providing your address and telephone number!)

Būklė: naujas, Equipment: - 5-axis electronic control - Swiveling control panel over the table - Electronic adjustment of the scoring unit - Automatic parallel fence adjustment with spindle and linear ball bearing guide - Start/stop switch integrated into the outrigger table - “Quick Lock” crosscut frame, longitudinal fence with LCD displays “Full Support” - Sliding table with curved contact surfaces - 10-year warranty! - Telescopic arm with linear guide and ball bearing guidance Technical specifications: - Main saw blade diameter: 550 mm - Scoring blade diameter: 120 mm - Panel cutting length with extendable stop: 3200 x 3200 mm Djdpfxecrnm Nj Ahrjuw - Tilting range: 0 to +46° - Max. cutting height at 90°: 200 mm - Max. cutting height at +45°: 130 mm - Saw blade speed: 2500, 3500, 5000 rpm - Scoring blade speed: 8500 rpm - Extraction port diameter: 120 & 100 mm - Main motor power (50 Hz): 7.0 kW - Scoring unit motor power (50 Hz): 1.3 kW - Cutting width with parallel fence: 1500 mm Including the following OPTIONS: 570335 “Pro-Lock” system for fast clamping of the main saw blade with quick-release riving knife adjustment (no tools required)

Būklė: naujas, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and lift. Cast iron saw unit ensures torsional rigidity and vibration-free operation. Facilitated panel feed thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – the sliding table is guided precisely and smoothly using a long-proven ball contact system. Scoring unit is equipped with its own drive and is easily adjustable from the outside. Saw unit accommodates blade diameters up to 400 mm. Scoring saw blade diameter: 160 mm. 2-position manually adjustable saw blade guard. 3-axis control system. Motorized rip fence with electronic positioning. Includes: - Position display via encoder - Adjustment via ball screw - Stepless adjustment via switch or automatic positioning system - Incremental adjustment possible - Fence swiveling mechanism under the table - Cutting width: 1270 mm - Programmed movement of motorized adjustment and tilting for the saw unit UP version: - With swiveling control panel for maximum flexibility X version: - With Compex miter fence for quick and precise execution of miter cuts, with automatic stop position compensation (length compensation) - Extension arm with angle-adjustable telescopic crosscut fence - Optional degree scale division (Part No.: 5510403) - Rip fence with 2 LCD displays for fence position Includes options: Dedpfxjd Akyge Ahreuw - Version with max. sliding carriage travel 3200 mm - Integrated on/off switches for main saw blade and scoring unit motors in squaring carriage - Squaring frame with CompeX device - Version "READY 3 UP" - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with rip fence: 1270 mm Max. crosscut width left of saw blade: 3260 mm Saw blade tilt: -46° to +46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Max. cutting height at -45°: 60 mm (Main) saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Būklė: naujas, Tilting Spindle Moulder Simple and practical machining operations thanks to the ergonomic arrangement of controls on the front of the machine Digital display for height and tilt position of the spindle Spindle speed display Spindle rotation reversible (clockwise/anticlockwise) 8 speeds Spindle diameter: 30 mm Dedpjcuwptofx Ahrsuw Spindle clamping length: 125 mm Max. tool diameter under table: 240 x 80 mm Extraction port diameter: 2 x 120 mm INCLUDES OPTIONS: 57.02.63 "LL" version for profiling work with 2 table extensions 57.03.30 Motorised height and angle adjustment of the working unit with digital displays 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switch 57.00.76 Fence with handwheel adjustment - Fence with stepless adjustment via handwheels easily accessible from the front: – Adjustment of the entire fence relative to the tool – Adjustment of the front ruler to change chip removal – Mechanical digital displays – Wooden fence jaws and connector bars Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex-location – free loading! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only answer enquiries that include your address and telephone number!)

Būklė: naudotas, Gamybos metai: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length in pendulum operation mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed of X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum cups: 6 / 2 standard type Standard end stops / Position: 1 / rear Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles Std/Quantity/Speed rpm: 12 (8X-5Y) / 4000 Horizontal spindles Std/Quantity/Speed rpm: 6 (4X-2Y) / 4000 Integrated groove/sawing unit in X Ømm/rpm: 120 / 6000 Motor power kW (hp): 2.2 (3) ELECTROSPINDLE Motor power Std./Opt. (S6) kW (hp): 7.5 (10) / 11 (15) Max. speed rpm: 24,000 Traveling tool changer on the aggregate holder in X: 4 positions, pneumatic INSTALLATION Installed power KVA: 23÷28.5 Compressed air requirement Nl/min: 450 Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction connection diameter mm: 150+150 (200) Machine weight kg: 3000 * X: Distance between stops – Y: Cutter center as reference point; Z: Workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center in C-frame design and worktable with adjustable workpiece supports and vacuum cups, designed for: - Vertical drilling on the panel surface Dusdoyymz Ujpfx Ahrew - Horizontal drilling on all four panel sides - Grooving with disc cutter in the X direction - General milling operations Self-supporting structure and worktable Structure made of welded steel construction with control cabinet integrated in the machine frame. Available in two different lengths and with standard workpiece supports or TV-compatible aggregate holder. Box construction made of cold-rolled steel with internal reinforcement ribs, protective devices, consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Travel paths of the portal and the aggregate carrier Movement in X, Y, and Z axes is achieved on linear prismatic ball-bearing guides using preloaded drives. X-axis drive (moving column) via a preloaded, backlash-free helical rack and pinion system. Movement of the aggregate carrier in Y and Z directions via preloaded systems. Positioning of the working units and machine function control via AC brushless servomotors and digital drives. CNC CONTROL The control unit consists of a numerical controller for the milling and drilling machines, and a connected personal computer with graphical user interface "XILOG PLUS". PC-office system: Windows XP - 17" color LCD monitor - QWERTY keyboard - Swiveling control panel - Machine software: Xilog Plus Xilog Plus features Programming - Parametric, graphic and ISO programming - Import of DXF and ASCII files - Straight or circular interpolation in three axes, linear in space, or spiral in the selected plane - Supported programming assistants for graphics and syntax in drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option for workpiece zero-point offset to perform drilling on inclined or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) and AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - …

Būklė: naudotas, Gamybos metai: 2011, Naudojamas darbinis plotis: 520 mm Storio stalo matmenys: 520 x 900 mm Didžiausias darbinis aukštis: 300 mm Mažiausias darbinis aukštis: 3,5 mm Mažiausias ruošinio ilgis: 220 mm Didžiausias nuėmimo gylis: 8 mm Peilių veleno skersmuo (peilių skaičius): 120 mm (4 vnt.) Peilių veleno apsukos: 4500 aps./min Padavimo greitis: 5-8-12-18 m/min Variklio galia: 7 kW Nusiurbimo angos skersmuo: 150 mm Nusiurbimo tūris: 1300 m³/h Svoris: apie 680 kg Matmenys: 1150 x 1100 x 1250 mm Duodpfx Ahjzimbdsrsw Sandėliavimo vieta: Garbsen

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Platusis juostinis šlifuoklis SCM Sandya 10 SCM 1100 R+R+RT Specifikacija: • Būklė – naudotas, po kompleksinės apžiūros • Gamintojas – SCM • Modelis – Sandya 10 • Darbinis plotis – 1100 mm • Maksimalus darbinis aukštis – 160 mm • 4 šlifavimo agregatai iš eilės: - kalibruojantis plieninis velenas – 160 mm skersmens - kietos gumos velenas – 160 mm skersmens Djdpfx Ahszcy I Eersuw - kombinuotas agregatas (guminis velenas + sekcijinė batelio tipo šlifavimo galvutė su papildomos prispaudimo funkcija) - dulkių nuėmimo šepetys • Pagrindiniai varikliai – 18,5 ir 12/15 kW galingumo • 2 darbiniai greičiai (antrajame variklyje) • Transporterio greitis reguliuojamas tolygiai • Elektroninis šlifuojamo elemento storio indikatorius • Optinis svyravimas • 2-ojo ir 3-iojo agregatų nupūtimo funkcija • Galimybė kiekvieną agregatą nuleisti/pakelti atskirai • Šlifuojamo elemento storio matuoklis • Stalas paruoštas vakuumo siurbliui (siurblys į komplektą neįeina) • Šlifavimo juostos matmenys – 2150 x 1115 mm • Dulkių ištraukimo jungtys: 4 x 155 mm ir 4 x 120 mm • Svoris apie 1800 kg • Gamybos metai – 1995 • Bendrieji matmenys 215 x 170 x 210 cm (ilgis x plotis x aukštis) Papildoma informacija: • Mašina yra geros techninės būklės, paruošta tiesioginiam naudojimui • Nuotraukose pavaizduota faktinė parduodamo daikto būklė • Galima įjungti ir patikrinti įrenginį vietoje • Nemokamas mokymas dirbti su mašina (įmonės būstinėje) • Aukcione nurodyta kaina nurodyta be PVM ir transporto išlaidų Finansavimas ir transportas: • Organizuojame transportavimą su MDD autoparku, kurjerių įmonėmis ar išoriniais vežėjais • Teikiame finansavimo galimybes – lizingas arba lizingo paskola

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 240 mm, bendras ilgis: 5 240 mm, bendras plotis: 2 400 mm, Tuščioji masė: 2700 kg - Pagaminimo metai: 2013 m. - Dokumentacija: yra - CE žymėjimas: yra - CE sertifikatas: nėra - Serijos numeris: AA1/017355 - Frezavimo velenų skaičius [vnt.]: 1 - Frezavimo velenas Nr. 1: - Valdomų ašių skaičius [vnt.]: 3 - Maksimalus veleno sūkių skaičius [aps./min.]: 24 000 - Pagrindinio variklio galia [kW]: 9,5 - Frezavimo stalo tipas: balkinis stalas - Gręžimo įrankiai: yra - Horizontalūs gręžimo velenai [vnt.]: 6 - Vertikalūs gręžimo velenai [vnt.]: 12 Dujdpfx Aewnii Rshrsw - Pjovimo įrenginys: yra - Sistema/programinė įranga: SCM Maestro - Darbinis plotas X [mm]: 3050 - Darbinis plotas Y [mm]: 1250 - Z ašies darbinis plotas [mm]: 1810 - Y ašies maksimalus eiga [mm]: 1550 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 31 - Transportavimo matmenys: 5240 mm x 2400 mm x 2244 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 2700 kg - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: nurodyta kaina yra be PVM PVM / diferencinis apmokestinimas: įmonėms PVM galima atskaityti Pristatymas ir senos įrangos atpirkimas galimi bet kuriuo metu, visoms pramoninėms prekėms Glenn Smeets

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, working width 220 mm working height 120 mm 4 heads spindle diameter 40 mm variable feed speed control Dsdpfjyxlqxex Ahreuw star-delta start head adjustment in two axes electric adjustment of pressure beam spring-loaded feed roller clamps spindle speed 6000 rpm

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Dodpsxy Tmnsfx Ahrouw Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: naujas, Gamybos metai: 2025, Technical Data: Usable working width: 520 mm Total table length: 2310 mm Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm 4 knives: 35x3x520 mm Aluminium planer fence: 1200x190 mm Planer fence tilting range: from 90° to 45° Min./max. planing height: 3 / 250 mm Feed speed thicknessing: 5-8-12-18 m/min Extraction hood diameter (planing): 120 mm Extraction hood diameter (thicknessing): 120 mm Standard equipment: - Infeed table adjustment via parallelogram system, chip removal display via degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tipping device Dusdpen Sm Tiefx Ahrew - Quick-change system for switching between planing and thicknessing (CE version) via special support for opening the planer tables, and automatic pneumatic positioning system for the extraction hood, with hydraulic assistance - "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hour counter - Machine table height adjustment via 4 steel threaded spindles - Rubber-coated outfeed roller - Interchangeable feed rollers - Segmented pressure shoes at the infeed - Cutterblock and setting gauge for planer knives Including the following special accessories: "TERSA" cutterblock with disposable reversible knives, Tiltable auxiliary fence

Būklė: nepatikrintas (naudotas), Gamybos metai: 2003, Funkcionalumas: nepatikrintas, Prisijungimo galia 480V 42kW 108A, ištraukimo jungtis 5x120 + 2x150 mm, 1x ištisinio obliavimo agregatas, 2x vertikaliųjų velenų agregatai, 1x storinimo agregatas, 1x universalus viršutinis agregatas, 1x universalus apatinis agregatas, veleno skersmuo 40 mm, tepalo siurblys, pneumatiniu būdu valdomi spaudimo volai jungtis 6 bar, elektrinis tilto reguliavimas, centrinis tepimas, stepless tiektuvas per dažnio keitiklį, bendras ilgis 4200 mm, gylis 2000 mm, aukštis 1700 mm – grąžinta iš kliento Duedpfx Asx E T Dmehrow

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, SCM Wide Belt Calibrating and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (hp) Feed gearbox motor: 0.45/0.8 (0.6/1.1) kW (hp) Feed speed: 4.5 / 9 m/min Standard equipment: - R140/85 rubber-coated calibrating roller, 140 mm diameter, 85 Shore – 1st position - R160/45 rubber-coated sanding roller, 160 mm diameter, 45 Shore – 2nd position - Hard sanding pad with manual working height adjustment - Motor power for 1st unit: 11 kW (15 hp) - Electronic ammeter for main motor current display - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds (4.5 / 9 m/min) with gearbox motor Dusdpfetwqn Ssx Ahrew - Automatic belt tracking Including the following special accessories: 1 pc. Version “B” for RCS, including: pneumatic on/off switching of roller on 1st unit “R”, pneumatic on/off switching of roller on 2nd unit “CS”, “MESAR” elastic segmented sanding pad, pneumatic on/off switching of sanding pad unit, electronic programming unit “LOGIC 50”, electronic adjustment of working height 1 pc. CE safety compliance 1 pc. roller table at infeed and outfeed for long workpieces, fitted with 5 non-driven rollers 1 pc. “RA” skewed-ribbed steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. sanding belt wear optimizer 1 pc. LED internal lighting 1 pc. rear door with inspection window 1 pc. Logic SC control system

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Pagaminimo metai: 2013 Frezavimo galva Darbo zona X: 3000 Darbo zona Y: 900 Darbo zona Z: 50 Atskiri agregatai: 1 Vertikali gręžtuvas: 12 Horizontali gręžtuvas X: 4 Horizontali gręžtuvas Y: 2 Griovelių pjūklas: Taip Stacionarus įrenginys: Taip Dsdjw Npyqopfx Ahreuw Tvirtinimo sistema: Spaustuvai Apsauga: šviesos užtvara Valdymas ir programinė įranga SCM XILOG Minimali užimama vieta: 3920x1170x2150

Būklė: naudotas, Gamybos metai: 1996, Darbo plotis: 520 mm Obliavimo velenas: Tersa Peilių skaičius: 4 Obliavimo stalo ilgis: 2300 mm Obliavimo tvorelės kampo reguliavimas: taip Obliavimo stalų pakėlimas: pneumatinis Maksimali storapjūvio aukščio pravaža: 250 mm Storio stalo aukščio reguliavimas: elektrinis Obliavimo storio rodmuo: skaitmeninis Padavimo greitis: 5 / 8 / 12 / 19 m/min Įtraukimo volas: plienas Ištraukimo volas: guma Spaudimo sija: segmentinė Stalo volai: ne Variklio galia: 5,5 kW Variklio stabdis: taip, automatinis Nusiurbimo jungtis: 120 mm Staklių ilgis: 2300 mm Dodpsy A Hh Tsfx Ahrjuw Staklių plotis: 1100 mm Svoris: 980 kg

Būklė: naudotas, Gamybos metai: 1992, Darbinis plotis: 520 mm Obliavimo aukštis: 250 mm Obliavimo velenas: juostiniai peiliai Peilių skaičius: 4 Aukščio reguliavimas: elektrinis Obliavimo storio rodmuo: skalė Padavimo greitis: 2 greičiai Įtraukimo volas: plienas Duodpfjyt E Raex Ahrjw Ištraukimo volas: plienas Stalo volai: nėra Variklio galia: 5,5 kW Ištraukimo prijungimas: 140 mm Staklių ilgis: 1200 mm Staklių plotis: 1400 mm Svoris: apie 900 kg

Būklė: naudotas, Gamybos metai: 2005, Darbinis plotis: 180 mm Darbinis aukštis: 110 mm Darbiniai velenai: 4 Velenų išdėstymas: apačioje, dešinėje, kairėje, viršuje Variklio galia – apatinis & viršutinis velenas: 7,5 kW Variklio galia – dešinysis & kairysis velenas: 7,5 kW Apatinio veleno reguliavimas: - Dešinio veleno reguliavimas: - Kairio veleno reguliavimas: rankinis ratukas Viršutinio veleno reguliavimas: rankinis ratukas Obliaus galvos apačioje & viršuje: Centrolock Obliaus galvos kairėje ir dešinėje: Centrolock su profiliavimo galimybe Padavimo greitis: 2 Padavimo volų prispaudimas: spyruoklė Srovės sunaudojimas: 32,8 A Ištraukimo jungtis: Staklių ilgis: Staklių plotis: Dujdsyq R Aijpfx Ahrow Svoris:

Būklė: naudotas, Gamybos metai: 1999, Sliding table length: 3800 mm Cutting width at rip fence: 1500 mm Cutting width at crosscut fence: 3200 mm Duodpsvxi Ddefx Ahrsw Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Rip fence display: digital Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 80 mm and 120 mm Machine length: 3900 mm Machine width: 2200 mm Weight: 1000 kg

Būklė: naudotas, Techniniai duomenys: Vikšro plotis: 220 mm Maksimalus pjovimo aukštis: 120 mm Duodpfszd En Eox Ahrow Maksimalus pjūklo disko skersmuo: 350 mm Sklandus padavimo reguliavimas Automatinė tepimo sistema Atgalinio smūgio apsauga Vartytuvas Ištraukimo antgalis: 180 mm Saugos jungiklis Maitinimas: 380 V Pagrindinio variklio galia: 18,5 kW Bendri matmenys: Ilgis: 1700 mm Plotis: 1600 mm Aukštis: 1250 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, working area 2700x1250mm table size: 2700x1250 mm Z-axis travel: 160 mm rotary axis: C spindle motor power: 8.5 kW spindle speed: 24,000 rpm tool change magazine (auxiliary): 8 tools main tool magazine: 10 tools saw aggregate on X and Y axes Dusdpfx Aewp R Eijhrsw vertical drills in X-axis: 8 pcs vertical drills in Y-axis: 5 pcs horizontal drills in X-axis: 4 pcs horizontal drills in Y-axis: 4 pcs tool holder: HSK 63 central lubrication pump vacuum raster table edge milling unit in X-axis year of manufacture: 2011

Būklė: naudotas, Techniniai duomenys: Veleno skersmuo: 30 mm Veleno aukštis: 160 mm Pakreipiamas velenas: -10° - 45° Apsisukimai: 3000/4500/6000/8000/10000 aps./min Rankinis veleno aukščio ir kampo reguliavimas Veleno fiksatorius Darbo stalo matmenys: 760/2500x1000/1500 mm Reguliuojamos liniuotės rankenos Variklio galia: 4 kW Maitinimas: 380 V Bendri matmenys: Ilgis: 1500 mm Plotis: 2500 mm Duedpszd Ap Tefx Ahrew Aukštis: 1350 mm

Būklė: naudotas, Gamybos metai: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Travel of X axis mm 750 Max. traverse speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Quantity 7 (4X-4Y, one shared) Horizontal spindles (Y axis) Quantity 2 (1+1) Horizontal spindles (X axis) Quantity 1 Fixed grooving saw (direction) X Saw blade diameter mm 100 Max. saw blade thickness mm 5 Motor output kW (HP) 1.5 (2) Spindle speed rpm 3350 Saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air velocity m/sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill shank D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1+1 drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor output 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece positioning and aggregate drive A CNC-controlled vacuum suction system clamps and positions the workpiece sequentially under the working unit during machining. X and Y axis movement is on THK guides with transmission via reinforced toothed belts. Z axis movement is pneumatic on ball-bushing guides with positioning via adjustable stops. Positioning of working units is achieved with DC technology and drives. CNC CONTROL The control was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen functionality - Alphanumeric keyboard - Self-diagnosis and operator language-specific error or fault messages Programming - Programming via CN - automatic optimization of drilling operations - Option for panel zero-point shift - Storage and import of drilling programs via USB dongle - Import of drilling programs from external CAD/CAM software Configuration - User interface in same language as instruction manuals Graphical representation of unit configuration Vacuum suction system "B-Power" Vacuum suction cup with double vacuum connector, recommended for highly porous panels (e.g. light MDF). Machine operation interface Software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; multicore processor recommended - RAM: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The code includes a DVD for installation and a USB key) Xilog Maestro features Programming - parametric, graphical programming - Supported programming with graphics and syntax assistance for drilling operations - Ability to create and save machining macros Integrated additional functions - Self-diagnosis and operator-language error or fault messages - User interface in Dodpfxjvvi I Rs Ahrsuw

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Duodovwbp Aopfx Ahrow

Būklė: naudotas, Gamybos metai: 2011, Apdirbimo dydis X kryptimi: 2770 mm. Apdirbimo dydis Y kryptimi: 1220 mm. Apdirbimo storis (Z matmuo): 80 mm. Mašinos konstrukcija: portalo tipo staklės. Pagrindinio veleno galia: 11,0 kW. Pagrindinio veleno greitis: 1500–24000 aps./min. Vektoriškai valdomas velenas: taip. Tvirtinimo sistema: HSK 63 F. Veleno aušinimas: oro aušinimas. Ašių skaičius: 3. Įrankių keitiklis: taip, vnt. Įrankių keitimo vietų skaičius: 10 vnt. Rašomosios mašinėlės klaviatūra: taip. Pelė: taip. Programinė sistema: Xilog Plus. DXF sąsaja: taip. Galima prisijungti prie interneto: taip. CD-ROM įrenginys: taip. Stalo tipas: tinklelinis stalas. Atramų sistema: atraminiai cilindrai. Vakuuminių siurblių skaičius: 1. Vakuuminio siurblio galia: 250 m³/val. Apsauga: saugos kiliminiai takai. Sandėlio vieta: Sonnefeld Dedpfxevvi Hte Ahrjuw

Būklė: naudotas, Gamybos metai: 2004, Sandėlio vieta: Nattheim Duedjvvi Hyopfx Ahrsw