CNC apdirbimo centras

SCM morbidelli M 800

Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height)

MACHINE STRUCTURE
The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space.
Isdpfxsxy Tmnj Aaujia

The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages.

AXIS MOVEMENT
All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors.

Maximum axis speeds:
· X-axis = 90 m/min
· Y-axis = 90 m/min
· Z-axis = 30 m/min

Safety Device with Bumper and Light Curtain 1
Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable.

CE Certification for the Safety System 1
Safety protection fence 1
Protective fencing at the sides and rear

Automatic Central Lubrication controlled by CNC 1
Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine.

Central Extraction Connection 1
All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow.

Chip Conveyor 1

Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1"
5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle)
Speed: max. 20,000 rpm
Left/right rotation
Liquid cooling
Tool interface: HSK 63F

18 kW Inverter provides stepless, even power delivery
Max. rotation:
B-axis = 200° (±100°)
C-axis = 650°

Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.