Paviršiaus obliavimas ir storinimas

SCM L’invicibile FS 7

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Briquetting press machine, automatic, hydraulic model POR STANDARD Itodpfsw E Iyijx Af Ijb Used machine Condition: Excellent Briquette cutting system Hydraulic machine CE marking: Yes Hourly output: 60 / 90 kg/h Hydraulic pump motor: 7.5 HP Briquette diameter: 65 mm Maximum briquette length: 50–300 mm Voltage: 380V / 50 Hz Net weight: 800 kg Overall dimensions: 195 x 110 x 150 cm (H)

Sąlyga: labai geros būklės (naudotas), Motor power: 1.2 HP, 400 V, 50 Hz Speed: 2800 rpm Drill table size: 650 x 330 mm Cross adjustment: 300 mm Longitudinal adjustment: 150 mm Height adjustment: 170 mm Table height: 880 mm Iedpevzramofx Af Ietb Weight: approx. 280 kg

Sąlyga: naujas, mit Hobelwelle Typ: R-R-RP1300 Itedpfx Ajd H Sc Eof Ijb Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2024/121/47, pjūklo disko skersmuo: 420 mm, GRAULE Crosscut and Mitre Circular Saw Model ZS 170 N (tiltable) 400 Volt three-phase brake motor, 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Cutting height: 170 mm Blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Itsdpfotwz Tlox Af Iob Including the following accessories: 1 pc. machine, tiltable on both sides via hand crank from the rear, from 90° to 45° left and approx. 30° to about 60° right 1 pc. HM circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative rake, for wood 1 pc. machine stand

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Iedpfjgr Udvex Af Iotb Jointer table length: 2720 mm Jointer table adjustment: Lever Concave/convex joint adjustment: No Display for chip removal: Scale Display for concave/convex jointing: - Adjustable fence angle: Yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 870 kg

Sąlyga: naudotas, Gamybos metai: 2021, Travel paths (X, Y, Z): 4062, 2,922, 660 mm Number of vertical drilling head spindles: 13 pcs. Number of horizontal drilling head spindles: 6 pcs. Number of tools: 27 pcs. Number of milling units: 1 pc. Working area: 3200, 1500, 200 mm Motor power: 12 kW Control: BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine, year of manufacture 2021, immediately available, with manufacturer's warranty for new machines! 5-axis CNC machining center in gantry design for use in interior fitting, doors, stairs; optionally upgradable with solid wood clamp for frame processing and arched windows. Brief summary: ----- Working area: X = 3200 mm; Y = 1500 mm; Z = 200 mm 1 unit 5-axis high-performance spindle, 12 kW, HSK 63 F interface 1 unit fixed mounted drilling head with 19 spindles: 7 individually selectable vertical drilling spindles in X direction 6 individually selectable vertical drilling spindles in Y direction 2 double horizontal drilling spindles in X direction 1 double horizontal drilling spindle in Y direction Sawing unit integrated in drilling head 27 tool change positions: Carousel tool changer with 22 slots, 102 mm pitch Linear 5-tool magazine for large tool diameters Original SCHMALZ tubeless worktable. Console table with 6 beams Workpiece lifting device Automatic tool length measurement system. 12 pcs. Original Schmalz vacuum cups, 114 x 140 mm, height = 125 mm 1 Becker vacuum pump, 100 m³/h 1 chip conveyor Design software Masterwork: 2D-Wop for standard panel working/interior fitting, arched components, doors Master 3D Level 2: for more complex operations, optionally also available for full 5-axis interpolation Prepared for use of solid wood clamp (arched components), Clamps can be offered as an option if required later Technical details as per attached comprehensive description ----- Total price for this configuration ex stock Oberkochen: on request! ----- Transport and commissioning on request! Ijdpfxoxmk Ats Af Ijtb Options for frame/arched window production, subject to additional charges: ----- Reference ring for the attachment of chip deflection elements on 5-axis electrospindles with HSK 63F interface: €410.00 Basic kit for clamping of arched components - 6 pneumatic clamps with two movements for arched components: €7,090.00 (technical information according to manufacturer - no liability!) Chip deflection elements, price per unit: €460.00 All prices listed are net, plus VAT. (technical data as per manufacturer - no liability!)

Sąlyga: naujas, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electro-hydraulic frame press machine, type Super Options: Working widths from 3,000 mm up to 5,000 mm Working heights from 2,000 mm up to 3,000 mm Optional equipment such as center pressure beam, tilting sash device, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner joints available as option), CE specification The only fully automatic, self-adjusting high-performance frame press in which pre-positioning of the timber components is not required. Width and height adjustments are made automatically, without any time loss, immediately after direct insertion of the workpieces into the pressing area. No repositioning of the timbers is necessary. Base machine features a heavy-duty welded frame construction using oversized, thick-walled special profiles. Guideways of the press corners on the pressure beams are designed for minimal wear. Continuous counter bearing on the stop side for width pressing, built in a torsion-resistant design, mounted to the machine base. Continuous lower counter bearing in extremely robust, torsion-resistant design, connected to both the base frame and the machine. Insertion height 500 mm. All counter bearings are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on the right with rapid, motorized width adjustment, guaranteeing parallel travel, includes automatic hydraulic locking: Central drive for dimension adjustment both horizontally and vertically, with high adjustment and travel speed, and automatic width and height adjustment (opto-electronically controlled). 2 double-acting vertical pressure cylinders, piston diameter 50 mm, 250 mm stroke, adjustable pressure force from 400 to 2000 kg. 2 double-acting horizontal pressure cylinders, piston diameter 40 mm, 80 mm stroke, adjustable pressure force from 250 to 1250 kg. Itsdpfxjd Rzc Rj Af Isb Upper right press corners, heavy-duty, machined design with automatic corner positioning. Floating press corners Contact surfaces with adhesive-repellent finish. Counterbearing and pressure plate depth 100 mm. 8-way holding and positioning device for completely loose insertion of all single timber pieces into the press area (no pre-arranging or pre-positioning required). Each frame element is held and positioned twice. Automatic lifting function allows for ergonomic insertion of the upper transverse timber on tall frames at a user-friendly height. Increases work safety by enabling floor-level operation—no ladders or steps required. All frame members are placed directly into the pressing area. Program selection options: Manual, motor-driven via pushbutton, Fully automatic via optoelectronic measurement, including automatic pressing cycle combined with safety light barrier. Automatic, cycle-controlled pressing sequence via pulse input: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing. Control cabinet mounted on the left side of the base frame for easy servicing. Fast, optoelectronic dimension adjustment. Compact hydraulic unit, adjustable from 20 to 100 bar. Freely programmable electric manual control for efficient operation, especially with large or complex frame assemblies (...

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION Isdpfx Afjcggy So Ijtb - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets - Operating capacity (cycles/min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Itodsdqzcxepfx Af Iob Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Machining centre Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills, as well as a grooving saw, 6-position tool changer. The NC410 control unit is equipped with a floppy disk drive, colour screen, and offers basic, graphically assisted programming capabilities. The Rover 20 also already allows for pendulum (pendulum processing) operations. Itodpfx Afslc Dwno Iob Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Available immediately from site.