Traub** Mit Feineinstellung pirkti naudotą (9 451)

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, SCHEER TW 4 Stair Stringer Router + SCHEER HM 16 Router Iajdpfx Asyxr T Toatew Everything is in excellent optical and technical condition, almost like new; the equipment has seen very little use. Everything works flawlessly—ready for immediate operation. These are machines designed for professional, commercial use, not DIY store junk. SCHEER TW 4 Stair Stringer Router Allows you to mill stair treads and risers with high precision and accuracy. The handwheel enables you to process even curved joint surfaces; you can also use it for routing cutouts in other panel materials, such as countertops. Features hardened guide shafts on which the cross-slide with the router is mounted. Equipped with ball-bearing linear bushings, ensuring the unit moves smoothly, precisely, and safely. Secured to the stringer or similar workpieces with four screw clamps for stability. The cross-slide has two stops for both longitudinal and transverse directions. Comes with two alignment angles. Supplied with manual, tools, and all accessories. Travel length: 750mm longitudinal, and the transverse travel was increased from 75mm to 320mm, significantly expanding the range of possible applications. To increase the travel, a new base frame made from aluminum profiles was fabricated. All modifications were performed by a reputable machine engineering company. Everything functions perfectly; this is a truly unique machine. SCHEER HM 16 Router Very good condition, with minimal signs of use. Extremely robust due to its triple-bearing router spindle. Precision concentricity and flawless cutting finish. Accurate column guide and torsion-resistant router table. Maintains constant speed even under heavy load. High-performance motor (virtually no signs of fatigue during operation). Long service life, thanks to soft start (full-wave electronics). Bearings are in good condition. Designed for heavy-duty, continuous use. Excellent visibility of the router spindle; chips are efficiently removed by a powerful blower. 220V, 1800W. Speed: 18,000 rpm. Operates perfectly. Tool holder: M16 internal thread.

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8,000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum resolution C-axis: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6,400 [rpm] - Max. bar diameter: 30 [mm] - Minimum resolution C-axis: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total connected load: 28 [kW] WEIGHT AND DIMENSIONS - Floor space required: 3,870 x 1,670 [mm] - Machine height: 2,500 [mm] - Machine weight: 6,000 [kg] MACHINE OPERATING HOURS - Power-on hours: 23,240 [h] - Operating hours: 19,500 [h] EQUIPMENT / ACCESSORIES - CNC control: Traub TX 8i-p - 3-color status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Parts removal - Slat band conveyor Ijdpoypxqrefx Aatjaw - Bar feeder interface fitted

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] Iodpfx Aouhaxfjatjaw - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] EQUIPMENT - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: LNS TRYTON HYBRID

Būklė: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 mm - Y-axis travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 Iaodpeuhaw Uofx Aatow - Number of driven positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar loader: FMB Minimag

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of live positions: 6 - Travel path X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 - Number of live positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW Ijdpfeuhawzjx Aateaw ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal device - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of jaws and collets for bar feeder magazine - Set of spare parts

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z travel: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] Iaedjuhawuspfx Aatow ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar feeder magazine - Tool presetting device

Būklė: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 26,709 h SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 16,854 h - Number of turrets: 2 Iaedpfxjuhawho Aatjw UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 mm - Z stroke: 50 mm - Driven tool speed: 8,000 rpm LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 mm * Y travel: -9.5 / +28 mm - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 16 kVA WEIGHT AND DIMENSIONS - Required space: 2,850 x 1,100 mm - Machine height: 1,480 mm - Machine weight: 2,000 kg EQUIPMENT/ACCESSORIES - Control system: Traub TX 8i - Powered guide bushing - Parts catcher - Parts conveyor - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 l * with paper filter - Bar feeder: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor Isdjuhav Depfx Aateaw - Various fixed and driven tool holders

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW Isdpfjuhadzex Aatjaw - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2x HAINBUCH

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, 1 x automatinis tekinimo staklės Traub A 25 Įranga: Gręžimo priešgalvis Ilginio tekinimo įrenginys Iodpszcdp Hefx Aatjaw Strypų padavimo mechanizmas Graži, pilnai sukomplektuota staklė, techniškai nepriekaištingos būklės. Staklę galima apžiūrėti veikiant.

Gamybos metai: 1995, būklė: paruoštas naudoti (naudotas), Elektra jungtis: 75A, prijungimo galia: 35kW, valdymas: Traub SYSTEM TX 8F, svoris: apie 4,5t, darbo valandų skaičius: 84.126h, įranga turi problemų judant įstrižomis kryptimis. Galima apžiūrėti vietoje. Iajdpfsy Tx Rzsx Aatsw

Būklė: geras (naudotas), Gamybos metai: 2005, veikimo valandos: 32 870 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6030578, tekėjimo skersmuo: 32 mm, veleno greitis (maks.): 8 000 aps./min, Strypo skersmuo (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Iaedpjvldx Ajfx Aatjw Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Sub spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Barfeeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine includes a large number of fixed and driven toolholders – see the attached photo for the list.

Būklė: geras (naudotas), Gamybos metai: 2003, CNC turning machine TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64-bit) Flat panel display 10.4 inch Additional V24 RS232 in control cabinet MDE interface in control cabinet (machine operational, piece counter) Isdpfx Aaezaud Asteaw Tool breakage monitoring for thread cutting without compensation chuck Main spindle: spindle bore 36 mm, max. speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Hainbuch change parts installation aid base body Hainbuch manual quick-change system Sub spindle: Sub spindle as motor spindle C-axis Device for sub-spindle counter-pressure, workpiece ejector unit, Axfix chuck Hainbuch Upper tool turret for driven tools, electronic gearbox X3 cross axis for front attachment, 5-position front tool holder Driven tools Cut-off side machining station, driven tools Workpiece removal unit: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min Internal coolant supply 30 bar High pressure 120 bar at front and rear machining stations, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass, and steel) Rinse gun Hinged belt chip conveyor, discharge height 950 mm Prepared for the addition of a bar feeder (guide tubes D25, D36) Follow rest workpiece stop (shank 16x16) Collision monitoring Brankamp CMS 100 on main and sub spindle Machine with no known defects,

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001 degrees SUBSPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel path: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status light - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor Iasdpfx Aajyw H Szotow - Parts catcher - Parts conveyor belt

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Tilting Spindle Moulder MAKA SF 4510/GRIGGIO with Power Feed Very good condition, the machine comes from a small rural carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition, the machine runs very smoothly. Comes with a spindle fence, where one fence jaw can be adjusted in depth and offers fine adjustment with a scale, allowing jointing operations such as on a glue profile to be performed. The entire spindle fence can also be adjusted with a screw, enabling very precise settings. Spindle locking via clamping lever. Chips are efficiently extracted – both at the fence and on the machine there are two extraction ports, each 120 mm in diameter. Supplied with 30 mm spindle, steplessly tiltable from -5° to 45°; tilting is done using a handwheel, with a precise degree scale. Iedpfxsy Rh Nze Aatoaw Clockwise/Counterclockwise rotation. We personally deliver and demonstrate the machine anywhere in Germany for 220.00 Euros, providing a risk-free purchase for you. Delivery to other EU countries is also possible. Large table opening, adjustable with various rings (allowing the use of cutter heads with very large diameters, and safe operation with small cutters). Speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment also via handwheel with locking screw. Interchangeable spindle (a 40 mm spindle can also be fitted). Optimal power transmission via V-belt drive. Table size: 1070 mm wide and 940 mm deep. Ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. CE certification. Supplied with manual, motor brake, and emergency stop switch; fulfills all requirements of German woodworking trade association (Holz-BG). Additionally, you receive an HAFFNER 3-roller power feed with 8 speeds. Optimal, simple, quick, and safe operation.

Gamybos metai: 1997, veikimo valandos: 54 646 h, būklė: naudotas, Traub TNA500 SN 253 Iasdpfx Ajyt Slwjatjw Velenas 2800 aps./min 12-ių įrankių revolveris Yra pavaromi įrankiai Galia 46 kVA

Būklė: naudotas, Gamybos metai: 1994, Funkcionalumas: ribota funkcionalumas, veleno skylė: 42 mm, veleno greitis (maks.): 4 000 aps./min, ašies variklio galia: 7 500 W, Įrenginys nuolat naudojamas, gamina hidraulines jungtis iš 22 mm šešiakampio (automatinis plienas). Labai standi ir našiai dirbanti paprastų detalių gamybai skirta staklė. Įrenginyje yra FETTE prisukama sriegimo galvutė. Yra 2 tokie įrenginiai – vienas jų papildomai komplektuojamas su šoninio gręžimo adaptoriumi ir sriegio frezavimo įtaisu bei dideliu frezų komplektu. Komplekte – didelis įrankių ir tvirtinimo įmovų rinkinys. Kaina už abi mašinas – derybų klausimas. Isdpfjxq Rz Dex Aatjaw

Gamybos metai: 1982, būklė: paruoštas naudoti (naudotas), Parduodama universali CNC įstrižo pagrindo tekinimo staklė Traub. Įrankių vietų skaičius: 12, įrankių laikiklis: VDI40, tekinimo skersmuo: 180 mm, didžiausias apsisukimo skersmuo: 450 mm, maksimali tekinimo ilgis: 490 mm, strypo pralaidumas: 60 mm, X/Z eiga: 160 mm/490 mm, greita eiga: 15 m/min, padavimas: 10 m/min, staklių matmenys X/Y/Z: apie 3100 mm/2000 mm/1800 mm, svoris: apie 4250 kg, valdymas: Traub System TX-8. Galima apžiūra vietoje. Iodsy I Adbepfx Aatoaw

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 91130417, Gamybos metai: 2018, veikimo valandos: 320 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 5 000 mm, laisvas kėlimas: 1 550 mm, apkrovos centras: 600 mm, stiebo tipas: triplex, statybinis aukštis: 2 200 mm, akumuliatoriaus modelis: PzS, baterijos talpa: 465 Ah, akumuliatoriaus įtampa: 48 V, šakių ilgis: 1 150 mm, Įranga: UVV saugos patikra, Jungheinrich ETV 216 stumdomasis krautuvas su 500DZ triplex stiebu, labai gerai prižiūrėtos būklės. Įrenginys su mažai darbo valandų, integruotas šoninis poslinkis, pilnas laisvas kėlimas ir kompaktiškas aukštis. Geros techninės ir vizualinės būklės, paruoštas naudoti, įskaitant įkroviklį. Galimas eksportas ir transportavimas. Iasdpfxey Tpuks Aatow

Būklė: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Iasdpfx Aajt E Dbystew Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Būklė: naudotas, Gamybos metai: 1996, maks. strypo skersmuo: 65 mm maks. apsukimo skersmuo: 175 mm maks. strypo ilgis: 3.000 mm Valdymas: System TX 8F Eigos ilgis - x: 140 mm Iajdoxbtq Nepfx Aatjw Eigos ilgis - z: 520 mm CNC tekinimo staklės | TRAUB - TNC 42/65 DG su strypų padavėju. Staklės yra gerai prižiūrėtos būklės. Staklių vaizdo įrašus iš gamyklos galime pateikti jūsų užklausus.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. Iodpsh R Taqofx Aatjaw The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Iaodpfx Aemhhy Njatsw The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, CNC apdirbimo centras • Homag BOF 321, pagaminimo metai 1998 pritaikytas laiptų ir kitų komponentų gamybai. • Homag PC83 valdymo sistema • Darbo sritis X = 5200 mm • Darbo sritis Y = 1300 mm • Darbo sritis Z = 410 mm • Frezavimo galvučių skaičius: 2 • Frezavimo varikliai: 12 kW • Maksimalus apsisukimų skaičius: 24 000 aps./min Isdpex S Ewrjfx Aatsaw • Sukamoji svirtis: Taip • 4 ašių staklės • Įrankių tvirtinimo sistema: HSK-F63 • Du įrankių žurnalai: po 12 įrankių kiekviename • Dviguba darbo zona • Valdymo konsolių skaičius: 10 • Vakuuminiai siurbliai: 2 • Vakuuminio siurblio galia: 100 m³/val. • Apsaugos įranga: slėginis kilimėlis • CE ženklinimas: Taip

Būklė: nepatikrintas (naudotas), Volume: Approx. 6000 L Type: Vertical, standing on three legs Tank diameter: 2250 mm Heatable/coolable double jacket Enamelled tank Ijdpfshg Nk Dox Aateaw