Mütek Mhb; Mhz pirkti naudotą (110)

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Nsdpfx Aaefmqq Ee Dsld Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: Nlodpfx Aod Su Hxja Djd With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Overall plant footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. Nlsdpfxsdwktke Aa Djd + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: naujas, Gamybos metai: 2026, Ideali mašina minkštos medienos smulkinimui. . Variklis: 11/15 kW; 400 V - 50 Hz - 3 fazės, Rotoriaus skersmuo: 260 mm, hidrauliškai valdomas stūmiklis Kieto sieto angos pagal pageidavimą (12 - 40 mm) Nsdpfx Aswzarcsa Dsld Ištraukimo jungtis Ø 160 mm Svoris apie 1.100 kg Išmatavimai (ixpxa) apie 1805 x 1118 x 1650 mm Spalva: mėlyna / pilka Reikalavimai žaliavai: - Drėgmės kiekis (absoliutus) turi būti mažesnis kaip 30 % - Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir pan., sukelia padidintą susidėvėjimą. . Maloniai kviečiame atlikti nemokamą bandymą su Jūsų medžiaga. Kviečiame Jus atvykti į Neckartailfingen. Taip pat galima, kad atsiųstumėte savo medžiagą per siuntų tarnybą, o bandymo eigą užfiksuosime nuotraukomis ir vaizdo įrašais.

Būklė: naujas, Gamybos metai: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput capacity Options: Double blade row + €895 net Veneer and paper stripper + €970 net * Recommended for extremely thin materials with a thickness less than 3 mm Our mütek Single-Shaft Shredder MRZ 530 processes a variety of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine features a robust construction ensuring consistent quality in continuous operation. We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight forwarding and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume: approx. 0.4 m³, Throughput capacity: 1 - 5 hopper fillings/hour, Hydraulically operated pusher, Screen perforation as required (10 - 40 mm), Extraction connection Ø 160 mm, Weight: approx. 1,000 kg, Dimensions: approx. 1550 x 1100 x 1640 mm, Moisture content of raw material must be under 30% (absolutely dry). Standard equipment included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta starting • Automatic shut-off in case of rotor idle • Removable extraction chute • Speed 70 - 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (conveyor preparation): +€1,980 net - Angled conveyor belt: +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet: +€5,980 net - Control for conveyor belt and overband magnet: +€2,750 net (Start and stop each synchronized with the shredder) Requirements for input/raw material: Nledpfx Aaod Db N Io Dod - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Nodpfed Dgw Ujx Aa Deld Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multiple reversible Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star-delta start - fast hydraulic system - automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control for the hydraulic pusher - pertinax guides for the hydraulic pusher - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials (subject to testing and approval by the manufacturer) Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (upon arrival) must be below 30% - Installation temperature: heated indoor area, at least +5°C - Metal and mineral impurities such as sand, stones, etc., lead to increased wear

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Njdpfx Aaod Nnwls Djld Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net

Gamybos metai: 2025, būklė: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled plastic parts or for re-shredding wood chips. Further details can be provided after testing with your material. Our granulators are used for the size reduction of a wide range of materials such as plastics or wood. Shredders and granulators are suitable for diverse shredding tasks across various applications. For example, defective parts and sprues arising at injection moulding machines need to be reprocessed. In blow moulding operations, besides rejects, there are also waste pieces or startup hoses. Materials that can be processed include, among others, blow moulding materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above via a hopper into the cutting chamber of the granulator. The rotor inside is equipped with cutting knives. The material is shredded between the rotating blades and the stationary knives until it reaches a defined granulate size and passes through the screen beneath the rotor. *Optionally, the processed material can then be conveyed pneumatically to Big Bags, silos, or other containers. The price applies only to the granulator system as shown in Image 1 – fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput: up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Size reduction of PE 1000 plastic Input material: approx. 40 mm chip length Final granulate size: approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ For G 30 wood chip re-shredding, significantly higher throughputs are possible – up to max. 400 kg/h with a 10 mm screen. *Metered feed, e.g. via conveyor belt or auger. Details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Exhaust connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – additional screens available Nledpsd N Dn Defx Aa Djd Price per screen: €390 Price for spare knife set: €679 Suitable for, e.g.: - All types of plastic waste Materials such as HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Items from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optionally with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optionally with matching extraction/transport system --- The following information is required for machine configuration: - Length x Width x Height of input material? - Screen size required (to what granulate size)? - Desired hourly throughput in kg? - Wall thickness in mm? - Material description Photos may also be helpful.

Būklė: naujas, Gamybos metai: 2025, The ideal machine for shredding both hardwood and softwood. Another unit is now available (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 14+2 pieces, 40x40 mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated pusher Nodpfx Aed E R D Soa Dsld Screen perforation as required (12–40 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm The following options are available at extra charge: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor on all 4 sides + €2,170 net (prevents the pusher from jamming; recommended for material less than 3 mm thick) - Shredder raised by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely required; closed, extra sturdy rotor bearing. Worth considering for screens smaller than 15 mm or with a high proportion of fines. Not necessary if the bearings are lubricated with grease approx. every 2 weeks during operation) Raw material requirements: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via freight forwarding, and we will document the test with photos and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: - Double blade row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: - Mineral contaminants such as sand, stones, etc., cause increased wear. Nledpegmfa Ajfx Aa Djd We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Būklė: naujas, Gamybos metai: 2026, Extremely Powerful Industrial Magnet for Iron Separation Special price €990 net (Shipping €14.90 net) *Refer to image 2 for construction lengths The active side features a stainless steel end plate (material grade 1.4301). Threaded holes are provided on the rear side for mounting *Handle available upon request Block magnet systems can be used at operating temperatures up to max. +100°C. The magnetic surface should be routinely cleaned of collected ferrous materials. Pick-up heights for all versions, e.g.: Approx. 60 mm for an M5 steel nut Approx. 100 mm for an M5 x 30 screw Installation example 1: Mounted above a conveyor belt, the iron parts "jump" to the magnet’s active surface. Installation example 2: Integrated in a pipeline system with direct contact to the material flow. For maximum separation reliability, a cascade arrangement of multiple block magnets in series is possible. Njdpfx Aastqfhxo Dold Installation and safety instructions: During handling, unpacking, and installation, ensure no loose ferrous parts (such as tools or screws) are nearby. The magnetic force is extremely strong and can cause painful injuries if fingers are caught between ferrous parts and the active surface. No steel components should be present within a minimum distance of 400 mm beneath the active side.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine with Special Rotor Available immediately Advantages: Nsdpfx Ajdv Eu Hoa Deld + Special rotor with reduced blade projection + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour *(dependent on screen size and material). Significantly higher throughput for smaller wood remnants. Motor: 22 kW; 400 V - 50 Hz - 3 ph Screen: 15/20 mm Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction port Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: System color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown in case of rotor idle - Speed 70-90 rpm for high throughput - Interval control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *As shown in the last 2 images. - Additional blade row + €2,790 - Segmented floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (Consider for plastic shredding with screens smaller than 15 mm or high fines content. Not necessary if greasing the bearings with lubricant every ~4 weeks during operation) - Raise shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €5,980 net - Control unit for conveyor belt and overbelt magnet + €2,750 net (Start and stop synchronized with shredder) - Outward-stretched feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Material feed must be free of metals and mineral impurities. Damage to the tools and/or increased wear may occur as a result

Gamybos metai: 2024, būklė: naujas, Overview – of the various configurations *not every position is needed: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Nledpfjff Sbijx Aa Dsd Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) - max. 35 mm length

Būklė: geras (naudotas), Refurbished Used Machine *Options available at extra cost, see below with full 1-year warranty Available for delivery approx. 16 weeks after order Technical Specifications: Throughput capacity up to max. 1200 kg/h depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter 75 mm including 2 m press channel Main drive motor 45 kW Feed screw geared motor 2 x 2.2 kW Compactor screw 2 x 5.5 kW Distributor screw 2.2 kW Hydraulic pump motor 0.37 kW Total connected load 65 kW Control panel with plain text display for operational states and load indicator for main drive and feed screws PLC control Siemens S7/300 with hour meter in the control cabinet Machine has CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for one press of type MAP 1200) - Buffer silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT - Temperature control unit for press tools For maintaining temperature to achieve optimal briquette quality. Temperature control for pump, cooler, fan, pressostat Ready-wired for operation – mandatory for use including corresponding control system €7,850 net Nledpfo E Dqujx Aa Dsd - Guillotine for briquette length cutting Compressed air connection required on site €6,940 net plus VAT - Conveyor line / cooling section (Nominal value: 4x2m) per 2 meters €990 net Assembly / Commissioning (Nominal value per press approx. 2-3 days on site) Charged according to effort based on evidence, invoiced separately. The following rates apply: Service technician/mechatronics technician per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Per diem allowance per fitter per day: depending on country Per car/van and travel kilometer: €0.98 / km Arrival and accommodation expenses reimbursed by invoice or by fixed rate at the buyer's expense. Test with customer's own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net ---- Raw material requirements: - The (absolute dry) moisture content must be between a minimum of 6 and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room, minimum +5°C - Feedstock must be free of metals and mineral contaminants. Damage to the press tools and/or increased wear may otherwise occur.

Būklė: naudotas, Smulkinimo mašina MGZ 1330, 37 kW Darbo valandos: 275 Įskaičiuota: - 2-asis peilių eiliškumas - Greita hidraulika didesniam našumui - Paruošta konvejeriniam juostai Pasirenkama: - Konvejerinė juosta su automatiniu metalo separatoriumi Njdpfx Aajx Tfdhe Dsld Jūsų privalumai: + itin didelė pjovimo agregato anga; viršuje: 1300x1200 mm + specialus rotorius, tinkamas tiek kietmedžiui, tiek minkštmedžiui + energiją taupanti ir galinga su 37 kW paleidimo galia Techniniai duomenys: Pajungimo anga viršuje (mm): 1.300 x 1.200 Piltuvo talpa (m³): 1,6 Rotoriaus skersmuo (mm): 368 Rotoriaus greitis (aps/min): 65–125 Galingumo poreikis (kW): 37 Sieto skylės (mm): pagal susitarimą Įrankiai: 37/70 peilių Ištraukimo antgalio Ø (mm): 200 Matmenys: 2430x2410x1735 mm (ilgis x plotis x aukštis) Svoris (apytiksliai kg): 3.500 --- Reikalavimai žaliavai: - Drėgnumas (atro) turi būti mažesnis nei 20 % - Tiekiama medžiaga turi būti be metalo ir mineralinių priemaišų. Priešingu atveju gali kilti įrankių pažeidimų ir/ar padidėti susidėvėjimas.

Būklė: labai geros būklės (naudotas), Keysight / Agilent InfiniiVision MSO-X 3034A Gamintojas: Keysight Technologies / Agilent Technologies Tipas: MSO-X 3034A Serija: InfiniiVision Prietaiso tipas: Mišrių signalų osciliografas / Skaitmeninis atminties osciliografas Dažnių juosta: 350 MHz Parduodamas naudotas Keysight / Agilent InfiniiVision MSO-X 3034A mišrių signalų osciliografas. Osciliografas puikiai tinka tiksliems signalų ir matavimo uždaviniams kūrimo, laboratorijos, techninio aptarnavimo, mokymo, tyrimų bei pramoninės elektronikos ir kokybės užtikrinimo srityse. Su 4 analoginiais kanalais, 16 skaitmeninių kanalų ir maksimaliu ėminių ėmimo dažniu 4 GSa/s, įrenginys siūlo plačias naudojimo galimybes sudėtingiems matavimo uždaviniams. Techniniai duomenys Gamintojas: Keysight Technologies / Agilent Technologies Serija: InfiniiVision Tipas: MSO-X 3034A Prietaiso tipas: Mišrių signalų osciliografas / Skaitmeninis atminties osciliografas Dažnių juosta: 350 MHz Analoginiai kanalai: 4 Skaitmeniniai kanalai: 16 Maks. ėminių ėmimo dažnis: 4 GSa/s Ekranas: spalvotas ekranas MegaZoom technologija Įėjimai: 4 × BNC analoginiai Loginis / skaitmeninis įėjimas USB Host USB Device Trigger Out Išorinis trigeris / Kalibravimo jungtis Maitinimas: 100–240 V AC Dažnis: 50 / 60 Hz Didžiausia galia: max. 100 W Matmenys (P × A × G): apie 381 × 204 × 142 mm Svoris: apie 4 kg Įranga Nljdpfxszh I Dwj Aa Ded Didelis spalvotas ekranas Priekiniai valdymo mygtukai 4 analoginiai kanalai 16 skaitmeninių kanalų MegaZoom technologija USB Host USB Device Trigerio ir analizės funkcijos Matavimo, atminties ir spausdinimo funkcijos Nešimo rankena 3 zondai pagal nuotraukas Maitinimo laidas Priedai pagal nuotraukas Panaudojimo sritys Elektronikos kūrimas Laboratorija Servisas Gedimų diagnostika Signalo analizė Plokščių testavimas Mokymas Tyrimai ir plėtra Kokybės užtikrinimas Pramoninė elektronika Komplektacija Keysight / Agilent InfiniiVision MSO-X 3034A 3 zondai pagal nuotraukas Maitinimo laidas Priedai pagal nuotraukas Būklė Naudota. Optinė būklė pagal nuotraukas. Kontrolės / ženklinimo lipdukai matomi nuotraukose. Komplektacija pagal aprašymą ir nuotraukas. Galimi pakeitimai, klaidos ir tarpinis pardavimas.

Būklė: beveik kaip naujas (naudotas), Dente cavo per affilatrice per lame HM VOLLMER modello MHZ Nedpfshcw N Ejx Aa Dsld

Būklė: naujas, Gamybos metai: 2025, Matmenys (Ilgis/Plotis/Aukštis): 7600x1400x1800 mm Svoris: 2950 kg Bendra galia: 9,15 kW Ekstruderis MHB-1560 AUTOMATIK - Automatinis padavimas per transporto juostą Nedpovz Hu Eefx Aa Dold - Didžiausias presavimo ilgis: 6000 mm - Didžiausias ruošinio plotis: 150 mm - Didžiausias ruošinio aukštis: 80 mm - Didžiausias darbo slėgis: 7500 kg - Hidraulinio siurblio variklis: 4,0 kW - Padvimo variklis: 0,75 + 1,1 kW - Atpjovimo pjūklo variklis: 2,2 kW - Įtampa: 50 Hz, 400 V - Bendra galia: 8,05 kW - Pjūklo sūkių dažnis: 2800 aps./min - Pjūklo diskas Ø 350 mm, skylė 30 mm - Padvimo greitis: 30 - 60 m/min - Suspausto oro poreikis: 8 bar - Matmenys: I=7600, P=1400, A=1800 mm - Svoris: 2950 kg

Būklė: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis): 3960x1400x1800 mm Svoris: 1200 kg Bendra galia: 9,15 kW Ekstruderis MHB-1525 AUTOMATIK - Automatinis padavimas per konvejerinę juostą - Didžiausias presavimo ilgis: 2500 mm - Didžiausias ruošinio plotis: 100 mm - Didžiausias ruošinio aukštis: 80 mm - Didžiausias darbinis slėgis: 7500 kg - Hidraulinės pompos variklis: 4,0 kW - Padavimo variklis: 0,75 + 1,1 kW - Nupjovimo pjūklo variklis: 2,2 kW - Įtampa: 50 Hz, 400 V - Bendra galia: 9,15 kW - Pjūklo apsukos: 2800 aps./min Nlsdpfx Asx Emu Esa Dod - Pjūklo disko Ø 350 mm, skylė 30 mm - Padavimo greitis: 30 - 60 m/min - Suslėgto oro poreikis: 8 bar - Matmenys: I=3960, P=1400, A=1800 mm - Svoris: 1200 kg

Būklė: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis): 4600x1400x1800 mm Svoris: 2200 kg Bendroji galia: 9,15 kW Ekstruderis MHB-1531 AUTOMATIK - Automatinis padavimas per transporto juostą - Maksimali presavimo ilgis: 3100 mm - Maksimalus ruošinio plotis: 100 mm - Maksimalus ruošinio aukštis: 80 mm - Maksimalus darbinis slėgis: 7500 kg - Hidraulinės pompos variklis: 4,0 kW - Pasiūlos variklis: 0,75 + 1,1 kW - Nupjovimo pjūklo variklis: 2,2 kW - Įtampa: 50 Hz, 400 V - Bendroji galia: 9,15 kW - Pjūklo apsukos: 2800 aps./min - Pjūklo diskas: Ø 350 mm, kiaurymė 30 mm - Pasiūlos greitis: 30 - 60 m/min - Suspausto oro poreikis: 8 bar - Išmatavimai: I=4600 mm, P=1400 mm, A=1800 mm Nledpfx Ajx Emvcja Dod - Svoris: 2200 kg

Būklė: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis): 6000x1400x1800 mm Nlsdex Emu Sepfx Aa Djd Svoris: 2500 kg Bendra galia: 8,05 kW Ekstruderis MHB-1545 AUTOMATIK - Automatinis padavimas per transporto juostą - Didžiausias presavimo ilgis: 4500 mm - Didžiausias ruošinio plotis: 150 mm - Didžiausias ruošinio aukštis: 80 mm - Didžiausias darbinis slėgis: 7500 kg - Hidraulinės pompos variklis: 4,0 kW - Pavaros variklis: 0,75 + 1,1 kW - Pjūklo variklis: 2,2 kW - Įtampa: 50 Hz, 400 V - Bendra galia: 8,05 kW - Pjūklo sūkių dažnis: 2800 aps./min - Pjūklo skersmuo: 350 mm, vidinė skylė 30 mm - Pavaros greitis: 30 - 60 m/min - Suspausto oro poreikis: 8 bar - Išmatavimai: Ilgis=6000, Plotis=1400, Aukštis=1800 mm - Svoris: 2500 kg

Būklė: paruoštas naudoti (naudotas), Trumpf / Hüttinger 1456168 valdymo dėžė Flow 36-48kW SN: 200128104 - 13,56MHz E, naudota, geros būklės, 100% veikianti, komplektacija pagal nuotraukas Nledpsx Eu T Asfx Aa Djd

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Permissible total weight: 750 kg Unladen weight: 140 kg Payload capacity: 610 kg 1 axle, tyres: 13" Internal dimensions of the box: 2010 x 1255 x 330/430 mm Overall length: 3250 mm Nedped Eckxofx Aa Dold Overall width: 1700 mm Overall height: 920 mm

Būklė: naudotas, Gamybos metai: 2022, veikimo valandos: 150 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AMW200SM56T4002J, Mikrobangų atitirpinimo įrenginys, skirtas greitam ir be atliekų užšaldytų mėsos, paukštienos, žuvies blokų ir pan. atitirpinimui. Įrengtas kamera cikliniam darbui (užpildymas – atitirpinimas – išėmimas). Nljdpfx Aaox D Aqdo Dsd Idealiai tinka atšildyti užšaldytus blokus per kelias minutes (temperatūros pokytis nuo -20 °C iki -4/-2 °C). Blokai lieka pakankamai atvėsinti tolimesniam perdirbimui (smulkinimui). Atšildymo laikas nuo -20 °C iki -2 °C gali skirtis, priklausomai nuo blokų storio. Galia: 10 kW Įtampa: 3 x 400 V, 50/60 Hz Vienkartinis pakrovimas: iki 55 kg (pvz., 2 blokai po 600 x 400 x 200 mm) Atšildymo laikas: 4–15 min. (priklausomai nuo norimos būklės po atitirpinimo) Mikrobangų dažnis: 915 MHz Vandens slėgis: 4 barai Vandens sunaudojimas: 12 l/min esant 18–22 °C temperatūrai Oro sunaudojimas: 20 l/min Oro slėgis: 6 barai Dėl papildomos informacijos prašome kreiptis.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, mašinos/transporto priemonės numeris: MHG5202500000125, Apelsino žievės tipo griebtuvas metalo laužui Talpa: 600 litrų Modelis: 5 žnyplės Nsdpfx Aajxrymxo Dsld Bendras svoris: 1 150 kg