CNC universalios frezavimo staklės

Kunzmann WF 4/3

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, bendras aukštis: 2 100 mm, bendras plotis: 2 100 mm, bendras ilgis: 2 300 mm, stalo plotis: 450 mm, stalo ilgis: 750 mm, sukimosi greitis (maks.): 4 500 aps./min, sukimosi greitis (min.): 1 aps./min, bendras svoris: 1 900 kg, ruošinio svoris (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, speeds 1 - 4500 rpm, motor 4.5 kW, spindle SK 40, Heidenhain TNC 320 control, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Hodswb Erzepfx Acujfn

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1996, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: 340547, X ašies eiga: 400 mm, Y ašies eiga: 320 mm, Z ašies eigos atstumas: 400 mm, plunksnos brūkšnys: 60 mm, bendras svoris: 1 300 kg, stalo ilgis: 650 mm, ruošinio svoris (maks.): 250 kg, stalo plotis: 350 mm, galia: 10 kW (13,60 AG), valdiklio modelis: TNC 124, Įranga: sūkių greitis be galo kintamas, The listed milling machine is being sold as defective. Displayed error: Severe positioning error on the Z-axis. Otherwise, the machine is in good condition and was used exclusively for training purposes. The following parts have been newly installed by the service: - Supply module - Z-axis assembly with brake - Z-axis linear measurement system - Scrapers on all axes - Filter mats - Timing belts - X-axis linear measurement system - Signal converter for measurement system Total costs for maintenance and repair amounted to €15,000. The error is still present. Due to the age of the machine and modernization of the workshop, repairs have been discontinued. The machine can be inspected by arrangement. All information is provided without any warranty. Hfsdpfx Aswlqtfjcuon

Sąlyga: naudotas, Gamybos metai: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm Tool holder SK 40 Spindle speed 1.0 - 4,000 rpm Feed rates 0 - 2,000 mm/min Quill stroke 60.0 mm Table size 650 x 350 mm T-slots 14 H7 Hodpfx Acow U U Sijusfn Control unit TNC 124 Motor power 5.5 kW Weight 1,800 kg Required space approx. 2,000 x 1,000 x 2,100 mm Original price ~ €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swiveling control panel, positioned to the right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed: 0 - 2,000 mm/min - Y-axis feed: 0 - 2,000 mm/min - Z-axis feed: 0 - 2,000 mm/min - Centralized lubrication, electric - Coolant system - Chip tray - Operating manual for machine and control unit Special accessories included: - Hydraulic machine vice - Numerous tool holders - Electronic handwheel HEIDENHAIN HR 410

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Kunzmann WF4/3 Bed-type Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2002, Excellent CONDITION CE compliant!! Technical Data: - Year of manufacture: 2002 - Fixed angle table - Spindle speed: stepless up to 4000 rpm - Stepless feed rate in 3 axes from 0 to 2000 mm/min - Travel paths X/Y/Z: 400/350/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 taper - Hydraulic tool clamping system - Weight approx. 1700 kg - Required space approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Equipment and Accessories: - Heidenhain TNC 124 control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system About the Machine: For sale is a Kunzmann WF4/3 bed-type milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in excellent original condition. It comes from a facility where it was only rarely used for training purposes. The control is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple by tilting away the vertical head. The guides are lubricated regularly via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. You can find further milling machines from reputable manufacturers on our website. Hsdpfx Acjw U Exyouofn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year 2010, Excellent CONDITION with Tooling, CE-compliant! Technical Data: >> Year of manufacture: 2010 >> Fixed angle table >> Speed: infinitely variable up to 4000 rpm >> Feed rate, infinitely variable on 3 axes from 0 to 2000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Rapid traverse X/Y/Z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1700 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manuals, and programming examples >> Handwheels >> Coolant system >> Toolholders, hydraulic vise, clamping tools About the Machine: Hfjdpfx Aow Id Dzocuon Offered is a Kunzmann WF4/3 universal milling machine with Heidenhain TNC 124 control in outstanding original condition. The machine is from a facility where it was only lightly used for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal axes. Changing from vertical to horizontal operation is very simple thanks to the swivel-mounted vertical head. All guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested in our workshop. Take the opportunity to inspect and test the Kunzmann under power on site.

Sąlyga: naudotas, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture: 1998 Travel distances X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed range 40 - 2500 rpm Feed rates X, Y and Z axes 0 - 1000 mm/min, infinitely variable Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill travel vertical 60 mm Spindle drive power 3 kW Electrical connection 400 Volt, 50 Hz - CNC contouring control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable electronic variator drive - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet fixed to machine - Coolant tank with pump adjacent - Centralized lubrication system - Lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Hedpelvyrbefx Acuofn Weight 1300 kg In good condition

Gamybos metai: 2001, Sąlyga: paruoštas naudoti (naudotas), X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000 rpm, quill stroke: 60mm, max. feed rate: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not operational; recurring faults occur: issues with motion monitoring on the Z- and Y-axes, significant positioning error on the Z-axis, malfunctions when moving the control cabinet. The ready-to-operate controller is missing and an error is constantly displayed on startup. After several attempts, a reference run is possible. The spindle gearbox is worn out. An on-site inspection is possible. Hfsdpfx Aceuqacwjuon

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 2 542 h, Funkcionalumas: visiškai funkcionalus, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Hedpfx Acow D D Sfoujfn Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: ribota funkcionalumas, X ašies eiga: 400 mm, Y ašies eiga: 320 mm, Z ašies eigos atstumas: 400 mm, X ašies padavimo greitis: 2 000 m/min, Y ašies padavimo greitis: 2 000 m/min, padavimo greitis Z ašis: 2 000 m/min, plunksnos brūkšnys: 60 mm, greitas poslinkis X ašimi: 5 000 m/min, greitas poslinkis Y ašis: 5 000 m/min, greitasis eiga Z ašyje: 4 000 m/min, bendras aukštis: 2 000 mm, bendras plotis: 2 000 mm, bendras ilgis: 2 000 mm, stalo plotis: 650 mm, stalo ilgis: 350 mm, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 1 aps./min, stalo apkrova: 250 kg, bendras svoris: 2 000 kg, Įranga: dokumentacija / vadovas, Mašinos būklė: Mašina šiuo metu vis dar eksploatuojama ir yra veikianti. Privalumai: Paprastas valdymas per TNC124 valdiklį Mažai priežiūros reikalaujanti, tvirta konstrukcija Galima rankinė gręžyba (tik linijinis apdirbimas) Hfsdpfx Acjw Icwmjujn Apribojimai: Apribota mašinos geometrija (šiek tiek netiksli) Santykinai didelės alyvos sąnaudos Papildoma informacija: Yra visi mašinos dokumentai. Variklis 5 kW, SK40 velenas, valdiklis Heidenhain TNC124, Vertikalus ir horizontalus pjaustytuvas – SK40, centrinis tepimas, rankiniai ratukai, aušinimo sistema.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Very Good CONDITION, CE Compliant! Technical Data: >> Year of Manufacture: 2000, Machine No. 343030 >> Fixed Angle Table >> Infinitely variable spindle speed up to 4,000 rpm >> Stepless feed in 3 axes from 0 to 2,000 mm/min >> Travel X/Y/Z: 400/320/400 mm >> Table size: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal spindle – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Required floor space approx.: 2.3 x 2 x 2 m >> Motor power: 13 KVA Accessories & Equipment: Hodewzu Skopfx Acuofn >> Heidenhain TNC 124 Control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual and programming examples >> Handwheels >> Coolant unit About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good condition, coming from a facility where it was only lightly used for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal milling is straightforward by simply swiveling away the vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our facility. We invite you to view and test the Kunzmann under power on site.