Gręžimo staklės

Kunzmann WF4/3

Sąlyga: naudotas, Gamybos metai: 1995, - Heidenhain digital position display - Infinitely variable feed in all axes - Rapid traverse in all axes - Hydraulic clamping system - Fixed angle table Lajdpfxevhfqre Ad Tsi - Electric central lubrication - Coolant system - Workplace lighting - Machine leveling feet - Year of manufacture: 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - T-slots: 5 - Slot width: 14 H7 - Slot spacing: 63 mm - Max. load: 250 kg Working area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. distances: - Table top to horizontal spindle center: 140 - 540 mm - Table top to bottom edge of vertical head, max.: 430 mm Milling spindle: - Tool holder: SK40 - Spindle speeds vertical/horizontal: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head swivels both sides: 90° Feeds: - Longitudinal & cross feed: 0 - 1000 mm/min - Rapid traverse longitudinal & cross: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Sąlyga: naudotas, Gamybos metai: 1980, Technical details: X-axis travel: 850 mm y-axis travel: 280 mm z-axis travel: 355 mm Spindle taper ISO: SK 45 / SK 45 Tilting spindle head left and right: each 90° Speed range: 28 - 1400 rpm / 18 steps Distance table/horizontal spindle: min.: 60 / max.: 180 mm Table clamping surface: 1070 x 270 mm Table load: 1000 kg Table swivel range +/-: 45° each Feed rate: X+Y: 16 - 800 mm/min and Z: 5 - 250 mm/min Total power requirement: 8.0 kW Machine weight approx.: 3100 kg Machine dimensions approx. LxWxH: 2.1 x 1.8 x 2.15 m Ledpfxju Ndf Ij Ad Teai Control cabinet dimensions: L: 0.8 x W: 0.45 x H: 1.65 m Clamping surface: 315 x 1250 mm Manual horizontal beam adjustment: 650 mm Mounted on the table: clamping head with 3-jaw chuck, Ø 200 mm, with internal jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter Ø 80 x Ø 8 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain Digital Readout, Year of Manufacture 1994, Excellent Condition!! Technical Data: >> Year of manufacture: 1994 >> Fixed angle table >> Spindle speeds from 40 to 2550 rpm >> Infinitely variable feed rate in X, Y, Z axes from 0 to 2000 mm/min >> Travel paths X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Quill stroke (vertical): 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1500 kg Accessories and Equipment: Lasdevyr R Nepfx Ad Tsi >> 3-axis Heidenhain digital readout >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the Machine: Offered is a Kunzmann WF4/3 universal milling machine in very good condition. It comes from a government facility where it was only lightly used. Conversion from vertical to horizontal operation is very simple, thanks to the folding vertical head. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our premises.

Sąlyga: naudotas, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Ledpfxslvyrbs Ad Toai Machine No. 341020 Year of manufacture: 1998 Travel distances X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed range 40 - 2500 rpm Feed rates X, Y and Z axes 0 - 1000 mm/min, infinitely variable Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill travel vertical 60 mm Spindle drive power 3 kW Electrical connection 400 Volt, 50 Hz - CNC contouring control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable electronic variator drive - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet fixed to machine - Coolant tank with pump adjacent - Centralized lubrication system - Lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg In good condition

Sąlyga: naudotas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm, centering bore 30H6 Table load capacity: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total electrical power requirement: 15 kVA Spindle speed range – main spindle: 20 – 6,300 rpm Drive power – main spindle: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Swivel rotary table manual, C-axis = table rotation 360°, B-axis = swivel range +105°/ -15° - Direct path measuring system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 gear stages - Full enclosure with sliding door - Swivel operator’s panel - Coolant nozzles at the vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Footprint L x W x H 2000 x 2000 x 2100 mm Weight 1750 kg Ledpovt D D Uofx Ad Tjai In good condition

Sąlyga: beveik kaip naujas (naudotas), Machine as new, from laboratory X-travel: 400 mm y-travel: 320 mm z-travel: 400 mm Control: Heidenhain TNC124 Table size: 650 x 350 mm Tool holder: SK 40 Spindle speeds: 0–4,000 rpm Lsdpfou Nnaiex Ad Teai Quill stroke: 60 mm Vertical head swivels 90 degrees Total power requirement: 5.0 kW Machine weight: approx. 1.3 t Space requirement: approx. 2.00 x 2.00 x 2.00 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, bendras aukštis: 2 100 mm, bendras plotis: 2 100 mm, bendras ilgis: 2 300 mm, stalo plotis: 450 mm, stalo ilgis: 750 mm, sukimosi greitis (maks.): 4 500 aps./min, sukimosi greitis (min.): 1 aps./min, bendras svoris: 1 900 kg, ruošinio svoris (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, speeds 1 - 4500 rpm, motor 4.5 kW, spindle SK 40, Heidenhain TNC 320 control, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Lasdpfxowb Erzj Ad Tsi

Gamybos metai: 1983, Sąlyga: naudotas, Universal tool milling machine Hermle Model UWF 700 Lodpfx Adolqx Azs Teai Year of manufacture: 1983 Table size: 700 x 285 mm Travel (X / Y / Z): 400 / 290 / 380 mm Spindle taper: SK 40 Spindle speeds: 40 – 2000 rpm Quill stroke: 63 mm Drive power: 2.2 kW Digital readout Tailstock Weight: 1,500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition | CE Compliant | Ex-Training Workshop! Technical Data: >> Year of manufacture: 2010 | Machine No. 347283 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse: X and Y axis 5,000 mm/min | Z axis 4,000 mm/min >> Travel x/y/z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories & Equipment: Lasdpfx Adsxuppus Tji >> Heidenhain TNC 320 path control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts manuals, control unit operating instructions, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About This Machine: We offer here a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 path control unit. This machine is in excellent condition with very low operating hours, coming from an educational facility where it was used solely for training purposes. The TNC 320 features an intuitive, easy-to-use control interface. Both vertical and horizontal clamping are hydraulically operated. Changing from vertical to horizontal operation is extremely straightforward thanks to the pivoting vertical head. The machine’s guides are regularly lubricated by the central automatic lubrication system. This Kunzmann has been mechanically and electrically tested in our facility. Take advantage of the opportunity to inspect and test the Kunzmann powered up on-site. We currently have 7 units of the Kunzmann WF4/3 with Heidenhain TNC 320 milling machines available. The machines are immediately available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control, Excellent Condition, CE-Compliant, from Training Workshop!! Technical Data: >> Year of manufacture: 2010 Machine serial no.: 347281 >> Rigid angular table >> Spindle speed: infinitely variable up to 4500 rpm >> Feedrate: infinitely variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis: 5000 mm/min Z axis: 4000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg Lodexupd Sspfx Ad Tsai >> Space required approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contour control >> Hydraulic clamping, vertical and horizontal >> Central automatic lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very easy due to the folding vertical head. The guides are lubricated regularly by the central lubrication system. This Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann onsite under power. There are a total of 7 Kunzmann WF4/3 milling machines with the TNC 320 Heidenhain control available. The machines are immediately available.

Sąlyga: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 240 mm, Z ašies eigos atstumas: 340 mm, For sale is a 5-axis machining center from Deckel Maho, model DMU 35 M, equipped with 2 manual rotary axes. The machine is in very good, immediately operational condition and is particularly space-saving due to its compact design. Technical data: Year of manufacture: 1999 Laedpfx Adswal Aqe Tji Control: Siemens 840D ShopMill X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors for X, Y & Z axes Clamping area: Ø 400 x 280 mm Rotation range: 360° (mechanical) Table clamping range: +105/ -150 (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamping: pneumatic/mechanical Required space: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Electronic handwheel, chip tray Tool holders & vices are not included in the offer, but can be supplied at extra cost if required. On request, transport and loading can be organized Europe-wide for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machines purchase / sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or ways to contact us, please visit our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control in Excellent Condition – CE Compliant, from Training Workshop! Technical Data: >> Year of construction: 2010 Machine No.: 347284 >> Fixed angular table >> Speed: stepless up to 4,500 rpm >> Stepless feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Features and Accessories: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, control operating manual, and programming samples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring controller. This universal milling machine is in excellent condition, with only minimal operating hours, and originated from a facility where it was used solely for training purposes. The controller is particularly easy to operate. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple due to the swing-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann on-site under power. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control are available. Machines are in stock and immediately available. Ljdpfxoxupdls Ad Tjai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE-compliant, from a Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg >> Vertical quill travel: 60 mm Lsdpfx Adexupc Us Teai >> Vertical and horizontal spindle – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Power requirement: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 contour control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 contour control. This machine is in excellent condition with very low operating hours and was only used for training purposes. It features very user-friendly controls. The machine also offers hydraulic clamping in both vertical and horizontal orientations. Changing from vertical to horizontal mode is quick and simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the automatic central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to view and test the machine under power at our premises. There are 7 units of the Kunzmann WF4/3 with TNC 320 Heidenhain control available. The machines are ready for immediate delivery.

Sąlyga: geras (naudotas), Gamybos metai: 1991, Travel: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Number of gear steps: 3 Tool holder: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping surface: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, measuring probe (defective) Lsdpswvif Ujfx Ad Tsai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE compliant, from a training workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347285 - Fixed angular table - Infinitely variable spindle speed up to 4,500 rpm Lsdpfxexupczo Ad Tsai - Stepless feed in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min; Z axis: 4,000 mm/min - Travel X/Y/Z: 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic drawbar system - Weight approx. 1,800 kg - Required space approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Equipment: - Heidenhain TNC 320 contour control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare part lists, operating instructions for the control system and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Offered here is a Kunzmann WF4/3 toolroom milling machine with a Heidenhain TNC 320 control unit. This universal milling machine is in very good condition and has only seen limited operating hours. It comes from an establishment where it was used solely for training purposes. The control is very easy to use. The machine is equipped with vertical and horizontal hydraulic clamping. Switching between vertical and horizontal operation is very straightforward thanks to the fold-away vertical head. The linear guides are regularly lubricated through the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. Take the opportunity to view and test the Kunzmann under power at our facility. Seven units of the Kunzmann WF4/3 with TNC 320 Heidenhain control are available. The machines are immediately available.