Universalus NC įrankių frezavimo staklės su Heidenhain TNC 124, universalios frezavimo staklės

KUNZMANN WF 3/4

Sąlyga: naudotas, Gamybos metai: 1995, - Heidenhain digital position display - Infinitely variable feed in all axes - Rapid traverse in all axes - Hydraulic clamping system - Fixed angle table - Electric central lubrication - Coolant system - Workplace lighting - Machine leveling feet - Year of manufacture: 1995 Specifications Milling table: Njdpfevhfqrsx Agioku - Clamping surface: 650 x 350 mm - T-slots: 5 - Slot width: 14 H7 - Slot spacing: 63 mm - Max. load: 250 kg Working area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. distances: - Table top to horizontal spindle center: 140 - 540 mm - Table top to bottom edge of vertical head, max.: 430 mm Milling spindle: - Tool holder: SK40 - Spindle speeds vertical/horizontal: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head swivels both sides: 90° Feeds: - Longitudinal & cross feed: 0 - 1000 mm/min - Rapid traverse longitudinal & cross: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 Nkjdpfx Ageu Aa I Ssiou CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: naudotas, Gamybos metai: 2007, padavimo ilgis X ašis: 400 mm, padavimo eiga Y ašimi: 350 mm, padavimo ilgis Z ašis: 400 mm, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 400 mm, šilko eigos atstumas: 60 mm, stalo apkrova: 250 kg, Įranga: dokumentacija / vadovas, naudota universali frezavimo ir gręžimo staklė Kunzmann WF 4/3 Heidenhain sekimo valdymas TNC 124 Eigos X/Y/Z = 400/350/400 mm Sukimosi greitis 1–4000 aps./min be pakopų Velenas SK40 DIN 69871 (forma AD) su įtraukimo varžtu DIN 69872 Horizontali ir vertikali ašis Fiksuotas kampinis stalas 650 x 350 mm, 6 x 14 H7 T-formos grioveliai Nksdsya Hrlepfx Agiju Aušinimo skysčio sistema Elektrinis rankinis ratukas HEIDENHAIN HR 410 Jutiklio sistema HEIDENHAIN KW130 su kabeliu Drožlių purslų apsaugos kabina, hidraulinė įrankių tvirtinimo sistema, centrinis tepimas. Pridedamas mašinos aplankas su naudojimosi instrukcija ir valdymo vartotojo vadovu. Papildomus techninius duomenis suteiksime paprašius. Staklės randasi pas mus 71334 Waiblingen-Beinstein mieste, iš karto prieinamos ir gali būti apžiūrėtos. Prašome iš anksto susitarti dėl apsilankymo.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veleno greitis (maks.): 4 000 aps./min, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: TNC 124, ašių skaičius: 3, Šis 3 ašių KUNZMANN WF 4/3 buvo pagamintas 2001 m. Jame yra vertikalus suklys su pasukama galvute, CNC valdomos X, Y ir Z ašys ir SK40 suklio kūgis. Suklio sukimosi dažnis svyruoja nuo 0 iki 4 aps/min, o visų ašių greitaveika - iki 1 mm/min. Apsvarstykite galimybę įsigyti šį KUNZMANN WF 4/3 universalųjį apdirbimo centrą. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. • Pasukama galvutė: ±90° • Suklys ir pavaros (INDRAMAT): • Pagrindinis suklio variklis: 2AD104C-B050A1-CS06-A2N1 • Suklio kūgis: SK40 • Suklio skylė: 22 mm • Plunksnos skersmuo: 90 mm • Plunksnos eiga: 90 mm: Galvutės skersmuo: 60 mm • Ašių pavaros: • X / Y / Z variklio tipas: MKD071B-061-GG1-KN • Greitis ir pastūma: • Suklio greičiai: • I diapazonas: 0-1 aps./min (pakopinis) • II diapazonas: 1 001-4 aps./min (bepakopis) • Greita eiga: • X ašis: iki 1 mm/min. • Y ašis: iki 1 mm/min • Z ašis: iki 1 mm/min • Pastūmos jėga (X/Y/Z): apie 4 kN • Elektra ir valdymas (INDRAMAT): • Maitinimo moduliai: • Grynasis filtras: NFD03.1-480-030 • Kondensatoriaus modulis: FNDR.06F.06D.3: CZM01.3-02-07 • Valdikliai: • Sraigto valdiklis: DKC11.3-100-7-FW • Ašies valdiklis: Spindulys: DKC01.3-040-7-FW • Programinės įrangos versijos: • Suklys: 1: ESM 2.1-SMT-02V Nedpfx Asya D Svegisku • Ašys: ESM 2.1-SMT-02V Technical Specification Taper Size SK 40

Sąlyga: naujas, Gamybos metai: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with Coolant System B (Option 25) (comprising separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom-head emergency stop, reversing switch (for clockwise and counterclockwise operation), motor protection switch Stepless speed adjustment, digital speed display, Feed overload protection, protection class IP54, connection plug Spindle guard with electrical interlock Technical data: Drilling capacity steel E335 (St 60): 40 mm Tapping: Steel E335 (St 60): M24 Cast Iron EN-GJL-200 (GG20): M30 Short spindle: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable surface: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Nsdsd Hy Elspfx Agijku Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Universal milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Nsdpfx Ashikrrjgioku Machine no.: 344349 Warranty: 6 months Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as seen -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Very Good Condition, CE Certified! Technical Specifications: >> Year of Manufacture: 2006, Machine No. 348013 >> Fixed angular table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic tool clamping system >> Weight approx. 1,800 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Njdpfewrhxfsx Agisku Equipment and Accessories: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. Moreover, the machine features hydraulic clamping both vertically and horizontally. Switching between vertical and horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, TECHNICAL SPECIFICATIONS Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distance Between T-slots: 65 mm From spindle centre to underside of counterholder: 160 mm Nodpfswuurwex Agioku Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal: 4000 mm/min Cross: 4000 mm/min Vertical: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swivelling: 0-140° Spindle feed Quill diameter: 90 mm Quill travel: Manual Feed: 75 mm Weight: Approx. 2300 kg SCOPE OF SUPPLY Includes, among others (list not exhaustive): ABENE milling machine Heidenhain control Toolholder set Coolant pump Levelling feet Mounting block Complete operating documentation Exact scope of supply according to photo series.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE Compliant! Technical Data: - Year of manufacture: 2008 - Machine No.: 348084 - Fixed angle table - Speed: infinitely variable up to 4,500 rpm - Feed rate: stepless in 3 axes from 0 to 2,000 mm/min - Rapid traverse: - X and Y axis: 5,000 mm/min - Z axis: 4,000 mm/min - Travel X/Y/Z: 400/350/400 mm - Table surface: 650 x 350 mm Nkedpfx Agov Dut Ioiju - Table load: 250 kg - Vertical quill stroke: 60 mm - Both vertical and horizontal spindle with SK40 taper - Hydraulic clamping system - Approximate weight: 1,800 kg - Required space (LxWxH): approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual for the control, and programming samples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition. It comes from a facility where it was only used infrequently for training purposes. The control system is very user-friendly. In addition, the machine features hydraulic clamping for both vertical and horizontal operations. Changing from vertical to horizontal is very simple thanks to the pivoting vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann on site under power.

Sąlyga: naudotas, Gamybos metai: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm Tool holder SK 40 Spindle speed 1.0 - 4,000 rpm Feed rates 0 - 2,000 mm/min Nkodew U U Siopfx Agisu Quill stroke 60.0 mm Table size 650 x 350 mm T-slots 14 H7 Control unit TNC 124 Motor power 5.5 kW Weight 1,800 kg Required space approx. 2,000 x 1,000 x 2,100 mm Original price ~ €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swiveling control panel, positioned to the right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed: 0 - 2,000 mm/min - Y-axis feed: 0 - 2,000 mm/min - Z-axis feed: 0 - 2,000 mm/min - Centralized lubrication, electric - Coolant system - Chip tray - Operating manual for machine and control unit Special accessories included: - Hydraulic machine vice - Numerous tool holders - Electronic handwheel HEIDENHAIN HR 410

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 421159679, Mobile jaw crusher on crawler tracks The VULCANO crusher is the most advanced and compact machine of the latest generation in the 25-ton category. The feed hopper, with road-legal loading dimensions and the ability to fold the discharge conveyor, allowing transport even on trailers, makes it versatile for transportation and quick to commission. From arrival on site to the start of crushing operations, only the warm-up time is required. Equipped with state-of-the-art control and operation systems, it is simple, user-friendly, and environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the machine’s automatic operation, ensuring maximum profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and crusher provides the machine with the highest robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine components for maintenance. The GI CRUSHER VULCANO delivers convincing and unmatched performance—whether for natural stone, recycling or rental applications. Production output: approx. 190 t/h Nksdpfx Agshd I Sboiou Patented HCS system Proportional distributor with “load sensing” for system optimization and approx. 30% fuel savings Optional pre-screening available Gap setting hydraulically adjustable, even during crushing operation Fast wedge and folding cylinder locking system Discharge height: 2,750 mm Dust extraction Tank pump Magnetic separator Warranty: 1 year or up to maximum operating hours from commissioning Technical specifications: Jaw crusher: 830 x 580 mm Crushing gap: 30 to 160 mm Feed hopper: 3.5 m³ – 1800 x 2970 mm Grizzly feeder: 770 x 2750 mm Main conveyor: 800 x 8,700 mm 4-cylinder diesel engine, constant speed, 82 HP / 60 kW, emission stage V Control panel Crawler track: 400 x 2,920 mm Weight: kg Transport length: 10,850 mm or 9,170 mm with folding discharge conveyor Transport width: 2,520 mm Transport height: 3,100 mm Further information Application: construction Drive: crawler

Sąlyga: geras (naudotas), Horizontal milling attachment – Counterholder Nkjdpfxovr Stue Agiju for KUNZMANN milling machines, WF series. This was an accessory for a KUNZMANN WF 4/3 TNC 124. There are 2 units available. The current list price at Kunzmann is over €2,000 plus VAT. With an appropriate adapter plate, it should also fit other machines (e.g. EMCO, MIKRON, DECKEL, FPS, etc.). Net price ex stock.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, For sale is a milling machine from Kunzmann, model WF 4/3. The machine is fully functional and ready for immediate use. Technical specifications: Control: Heidenhain TNC 124 Year of manufacture: 1996 X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Rigid angle table, clamping surface: 650 x 350 mm Maximum load: 250 kg Nkjdpfxsvftrxe Agiju Main drive AC motor: 5.5 kW Feed drives: separate AC drives Infinitely variable feed rate: 0–2,000 mm/min Tool holder: SK 40 Speed range: 1–4,000 rpm Quill, vertical: stroke 60 mm Swivel range vertical milling head: ±90° Tool clamping: hydraulic Direct, distance-encoded linear measurement systems resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441: 0.015 mm Operating voltage: 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Transport and loading can be organized Europe-wide on request, subject to an additional charge. Prices are plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you! Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: GO 832 833, Demag ELKE overhead crane crane runway bridge crane indoor crane crane 2 units available!!! Load capacity / lifting capacity: 1.6 tons (1600 kg) Track gauge: 11,785 mm, external dimension approx. 12,000 mm Year of manufacture: 1997 with pendant control Lifting height: 3 m Overall height: from top edge of crane girder to bottom edge of hook approx. 900 mm End carriage length: approx. 200 cm The crane is dismantled and available immediately. Matching power rails can also be supplied. Please inquire. Nksdpfeum I Akjx Agiou Very good condition, inspection logbook is available. Column-mounted and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible – please provide postal code for quotation. Collection preferred.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control – Excellent Condition, CE Compliant! Technical Data: - Year of manufacture: 2003 Machine no.: 344174 - Rigid angle table - Spindle speed: stepless up to 4,000 rpm - Feed: infinitely variable in 3 axes from 0 to 2,000 mm/min Njdpfxox Elxpo Agieku - Travel (X/Y/Z): 400/320/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Quill stroke vertical: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic clamping system - Weight approx. 1,800 kg - Required space approx.: 2.3 x 2 x 2 m - Drive capacity: 12 kVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operation manual, and programming examples - Handwheels - Coolant system - Heidenhain electronic handwheel About the machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with the Heidenhain TNC 124 control. This universal milling machine is in excellent condition. It comes from a facility where it was used predominantly for training purposes and saw little actual machining. The control unit is very intuitive and user-friendly. The machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is extremely simple thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. Our team has mechanically and electrically inspected the Kunzmann. You are welcome to view and test the machine under power at our facility. The machine is immediately available.