Gręžimo staklės

KUNZMANN WF 4/3

Sąlyga: geras (naudotas), Horizontal milling attachment – Counterholder for KUNZMANN milling machines, WF series. This was an accessory for a KUNZMANN WF 4/3 TNC 124. There are 2 units available. Dedpfxjvr Stuj Ab Soul The current list price at Kunzmann is over €2,000 plus VAT. With an appropriate adapter plate, it should also fit other machines (e.g. EMCO, MIKRON, DECKEL, FPS, etc.). Net price ex stock.

Gamybos metai: 2014, Sąlyga: paruoštas naudoti (naudotas), A defective ABA CNC precision surface and profile grinding machine is available. Grinding length: 2500 mm, grinding width: 1020 mm, cross travel: 920 mm, cross feed intermittent: 750 mm/pulse, cross feed continuous: 5000 mm/min, table-to-spindle center distance: 1100 mm, magnetic chuck dimensions X/Y: 2500 mm/1000 mm, max. table load: 5000 kg, table speed: 60 m/min, spindle power: 26 kW, grinding wheel dimensions X/Y/Z: 500 mm/100 mm/203 mm, grinding wheel speed: 35 m/s. Machine dimensions X/Y/Z: approx. 8000 mm/4000 mm/3150 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840 D Solution Line, operating hours: approx. 1,000 h, cycle time: approx. 400 h. Includes Hyfra Sigma 13-S cooling unit, year of manufacture: 2014. The linear drive of the X-axis is defective and has been removed. Documentation available. Inspection on site possible. Djdpfx Aowi Tpksb Seul

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, For sale is a milling machine from Kunzmann, model WF 4/3. The machine is fully functional and ready for immediate use. Technical specifications: Control: Heidenhain TNC 124 Year of manufacture: 1996 X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Rigid angle table, clamping surface: 650 x 350 mm Maximum load: 250 kg Main drive AC motor: 5.5 kW Feed drives: separate AC drives Infinitely variable feed rate: 0–2,000 mm/min Tool holder: SK 40 Speed range: 1–4,000 rpm Quill, vertical: stroke 60 mm Swivel range vertical milling head: ±90° Tool clamping: hydraulic Direct, distance-encoded linear measurement systems resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441: 0.015 mm Operating voltage: 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Transport and loading can be organized Europe-wide on request, subject to an additional charge. Prices are plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you! Trade-in or exchange possible! Machinery purchase & sale Duodpfx Abovftrxj Sel PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control – Excellent Condition, CE Compliant! Technical Data: - Year of manufacture: 2003 Machine no.: 344174 - Rigid angle table - Spindle speed: stepless up to 4,000 rpm - Feed: infinitely variable in 3 axes from 0 to 2,000 mm/min - Travel (X/Y/Z): 400/320/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Quill stroke vertical: 60 mm - Vertical and horizontal quill – SK40 taper - Hydraulic clamping system - Weight approx. 1,800 kg - Required space approx.: 2.3 x 2 x 2 m - Drive capacity: 12 kVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operation manual, and programming examples - Handwheels - Coolant system - Heidenhain electronic handwheel About the machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with the Heidenhain TNC 124 control. This universal milling machine is in excellent condition. It comes from a facility where it was used predominantly for training purposes and saw little actual machining. The control unit is very intuitive and user-friendly. The machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is extremely simple thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. Our team has mechanically and electrically inspected the Kunzmann. You are welcome to view and test the machine under power at our facility. The machine is immediately available. Dodpox Elxpefx Ab Ssul

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Space requirements approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included. Duedpfx Aeunt Eyjb Sjl

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1998, Bendrieji duomenys Matmenys plotis: 2000 mm Matmenys gylis: 2000 mm Matmenys aukštis: 2000 mm Judėjimas X ašies eiga: 400 mm Y ašies eiga: 320 mm Z ašies eiga: 400 mm Įrankiai Duedpfx Ajx D Er Rob Sel Įrankio laikiklio tipas: SK40 Ši KUNZMANN WF4/3 universali frezavimo staklė pagaminta 1998 metais. Ji turi prispaudimo paviršių 650 x 350 mm, maksimali apkrova – 250 kg, įrankio laikiklis – SK40. Greičio diapazonas nuo 40 iki 2500 aps./min, cilindro eiga – 60 mm. Staklė komplektuojama su valdymo spintele, sveria apie 1300 kg. Idealiai tinka tiksliems frezavimo darbams. Susisiekite dėl išsamesnės informacijos apie šias stakles. Taikymo sritys: Frezavimas

Sąlyga: naudotas, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture: 1998 Travel distances X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed range 40 - 2500 rpm Feed rates X, Y and Z axes 0 - 1000 mm/min, infinitely variable Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill travel vertical 60 mm Spindle drive power 3 kW Electrical connection 400 Volt, 50 Hz - CNC contouring control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable electronic variator drive - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet fixed to machine - Coolant tank with pump adjacent - Centralized lubrication system - Lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Dedpfx Aelvyrbob Seul In good condition

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, CNC Milling Machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Condition: Used Control unit: Heidenhain TNC 426 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Dedpfx Abshlp Iwe Seul Tool changer with 40 positions Tool holder: ISO 40 Spindle speed: 8,000 rpm Overall dimensions: L 3,200 x W 2,100 x H 2,900 mm Weight: 6,200 kg Shipping possible throughout Germany and Austria. Surcharge €1,000 Sale excludes warranty.

Sąlyga: naudotas, Gamybos metai: 1996, x-travel 400 mm y-travel 350 mm Dodpew U U Siefx Ab Sjul z-travel 400 mm Tool holder SK 40 Spindle speed 1.0 - 4,000 rpm Feed rates 0 - 2,000 mm/min Quill stroke 60.0 mm Table size 650 x 350 mm T-slots 14 H7 Control unit TNC 124 Motor power 5.5 kW Weight 1,800 kg Required space approx. 2,000 x 1,000 x 2,100 mm Original price ~ €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swiveling control panel, positioned to the right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed: 0 - 2,000 mm/min - Y-axis feed: 0 - 2,000 mm/min - Z-axis feed: 0 - 2,000 mm/min - Centralized lubrication, electric - Coolant system - Chip tray - Operating manual for machine and control unit Special accessories included: - Hydraulic machine vice - Numerous tool holders - Electronic handwheel HEIDENHAIN HR 410

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain Digital Readout, Year of Manufacture 1994, Excellent Condition!! Technical Data: >> Year of manufacture: 1994 >> Fixed angle table >> Spindle speeds from 40 to 2550 rpm >> Infinitely variable feed rate in X, Y, Z axes from 0 to 2000 mm/min >> Travel paths X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Quill stroke (vertical): 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Electric central lubrication Dsdpfxevyr R No Ab Soul >> Machine feet >> Handwheels >> Coolant system About the Machine: Offered is a Kunzmann WF4/3 universal milling machine in very good condition. It comes from a government facility where it was only lightly used. Conversion from vertical to horizontal operation is very simple, thanks to the folding vertical head. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our premises.

Sąlyga: naujas, plieno lakšto storis (maks.): 4 mm, - Capacity: 4 mm Dodpfogg Nq Hex Ab Sjul - Hydraulic roll adjustment - Foot switch - Brake motor - Equipped with 4 sets of rolls - Emergency stop - 400V

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition | CE Compliant | Ex-Training Workshop! Technical Data: >> Year of manufacture: 2010 | Machine No. 347283 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse: X and Y axis 5,000 mm/min | Z axis 4,000 mm/min >> Travel x/y/z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories & Equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts manuals, control unit operating instructions, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About This Machine: Duedpsxuppuofx Ab Ssl We offer here a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 path control unit. This machine is in excellent condition with very low operating hours, coming from an educational facility where it was used solely for training purposes. The TNC 320 features an intuitive, easy-to-use control interface. Both vertical and horizontal clamping are hydraulically operated. Changing from vertical to horizontal operation is extremely straightforward thanks to the pivoting vertical head. The machine’s guides are regularly lubricated by the central automatic lubrication system. This Kunzmann has been mechanically and electrically tested in our facility. Take advantage of the opportunity to inspect and test the Kunzmann powered up on-site. We currently have 7 units of the Kunzmann WF4/3 with Heidenhain TNC 320 milling machines available. The machines are immediately available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control in Excellent Condition – CE Compliant, from Training Workshop! Technical Data: >> Year of construction: 2010 Machine No.: 347284 >> Fixed angular table >> Speed: stepless up to 4,500 rpm >> Stepless feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Features and Accessories: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, control operating manual, and programming samples >> Handwheels >> Coolant system >> Electronic handwheel HR410 Djdpfx Abjxupdlj Seul About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring controller. This universal milling machine is in excellent condition, with only minimal operating hours, and originated from a facility where it was used solely for training purposes. The controller is particularly easy to operate. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple due to the swing-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann on-site under power. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control are available. Machines are in stock and immediately available.

Sąlyga: geras (naudotas), Gamybos metai: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travels: X-axis: 160 mm Z-axis: 450 mm Feeds: Rapid traverse X: 60 m/min Duedev Drigepfx Ab Ssl Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Connected load Machine weight approx.: 3.7 t Space requirement approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE-compliant, from a Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Power requirement: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 contour control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 contour control. This machine is in excellent condition with very low operating hours and was only used for training purposes. It features very user-friendly controls. The machine also offers hydraulic clamping in both vertical and horizontal orientations. Changing from vertical to horizontal mode is quick and simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the automatic central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to view and test the machine under power at our premises. Dujdpjxupc Ujfx Ab Sjl There are 7 units of the Kunzmann WF4/3 with TNC 320 Heidenhain control available. The machines are ready for immediate delivery.