Horizontalus frezavimo įtaisas - priešlaikis

Kunzmann WF 4 / 3

Sąlyga: naudotas, Gamybos metai: 1995, - Heidenhain digital position display - Infinitely variable feed in all axes - Rapid traverse in all axes - Hydraulic clamping system - Fixed angle table - Electric central lubrication - Coolant system Cedpfx Aevhfqrsdmjaa - Workplace lighting - Machine leveling feet - Year of manufacture: 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - T-slots: 5 - Slot width: 14 H7 - Slot spacing: 63 mm - Max. load: 250 kg Working area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. distances: - Table top to horizontal spindle center: 140 - 540 mm - Table top to bottom edge of vertical head, max.: 430 mm Milling spindle: - Tool holder: SK40 - Spindle speeds vertical/horizontal: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head swivels both sides: 90° Feeds: - Longitudinal & cross feed: 0 - 1000 mm/min - Rapid traverse longitudinal & cross: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain Digital Readout, Year of Manufacture 1994, Excellent Condition!! Technical Data: >> Year of manufacture: 1994 >> Fixed angle table >> Spindle speeds from 40 to 2550 rpm >> Infinitely variable feed rate in X, Y, Z axes from 0 to 2000 mm/min >> Travel paths X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Quill stroke (vertical): 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Electric central lubrication >> Machine feet >> Handwheels Caodjvyr R Nspfx Admoa >> Coolant system About the Machine: Offered is a Kunzmann WF4/3 universal milling machine in very good condition. It comes from a government facility where it was only lightly used. Conversion from vertical to horizontal operation is very simple, thanks to the folding vertical head. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our premises.

Sąlyga: naudotas, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture: 1998 Travel distances X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed range 40 - 2500 rpm Feed rates X, Y and Z axes 0 - 1000 mm/min, infinitely variable Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill travel vertical 60 mm Spindle drive power 3 kW Electrical connection 400 Volt, 50 Hz Cajdpfx Aslvyrbjdmsa - CNC contouring control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable electronic variator drive - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet fixed to machine - Coolant tank with pump adjacent - Centralized lubrication system - Lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg In good condition

Sąlyga: beveik kaip naujas (naudotas), Machine as new, from laboratory X-travel: 400 mm y-travel: 320 mm z-travel: 400 mm Control: Heidenhain TNC124 Table size: 650 x 350 mm Tool holder: SK 40 Codpeu Nnaijfx Admjaa Spindle speeds: 0–4,000 rpm Quill stroke: 60 mm Vertical head swivels 90 degrees Total power requirement: 5.0 kW Machine weight: approx. 1.3 t Space requirement: approx. 2.00 x 2.00 x 2.00 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition | CE Compliant | Ex-Training Workshop! Technical Data: Cajdpfx Asxuppuedmea >> Year of manufacture: 2010 | Machine No. 347283 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse: X and Y axis 5,000 mm/min | Z axis 4,000 mm/min >> Travel x/y/z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories & Equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts manuals, control unit operating instructions, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About This Machine: We offer here a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 path control unit. This machine is in excellent condition with very low operating hours, coming from an educational facility where it was used solely for training purposes. The TNC 320 features an intuitive, easy-to-use control interface. Both vertical and horizontal clamping are hydraulically operated. Changing from vertical to horizontal operation is extremely straightforward thanks to the pivoting vertical head. The machine’s guides are regularly lubricated by the central automatic lubrication system. This Kunzmann has been mechanically and electrically tested in our facility. Take advantage of the opportunity to inspect and test the Kunzmann powered up on-site. We currently have 7 units of the Kunzmann WF4/3 with Heidenhain TNC 320 milling machines available. The machines are immediately available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Kunzmann WF4/3 Bed-type Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2002, Excellent CONDITION CE compliant!! Technical Data: - Year of manufacture: 2002 - Fixed angle table - Spindle speed: stepless up to 4000 rpm - Stepless feed rate in 3 axes from 0 to 2000 mm/min - Travel paths X/Y/Z: 400/350/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm Cedpfjw U Exyjx Admoaa - Vertical and horizontal quill - SK40 taper - Hydraulic tool clamping system - Weight approx. 1700 kg - Required space approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Equipment and Accessories: - Heidenhain TNC 124 control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples - Handwheels - Coolant system About the Machine: For sale is a Kunzmann WF4/3 bed-type milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in excellent original condition. It comes from a facility where it was only rarely used for training purposes. The control is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple by tilting away the vertical head. The guides are lubricated regularly via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. You can find further milling machines from reputable manufacturers on our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control, Excellent Condition, CE-Compliant, from Training Workshop!! Technical Data: >> Year of manufacture: 2010 Machine serial no.: 347281 >> Rigid angular table >> Spindle speed: infinitely variable up to 4500 rpm >> Feedrate: infinitely variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis: 5000 mm/min Z axis: 4000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space required approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contour control >> Hydraulic clamping, vertical and horizontal >> Central automatic lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very easy due to the folding vertical head. The guides are lubricated regularly by the central lubrication system. This Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann onsite under power. There are a total of 7 Kunzmann WF4/3 milling machines with the TNC 320 Heidenhain control available. The machines are immediately available. Caedpfx Aexupd Sedmsa

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control in Excellent Condition – CE Compliant, from Training Workshop! Casdpoxupdlsfx Admsa Technical Data: >> Year of construction: 2010 Machine No.: 347284 >> Fixed angular table >> Speed: stepless up to 4,500 rpm >> Stepless feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Features and Accessories: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, control operating manual, and programming samples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring controller. This universal milling machine is in excellent condition, with only minimal operating hours, and originated from a facility where it was used solely for training purposes. The controller is particularly easy to operate. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple due to the swing-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann on-site under power. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control are available. Machines are in stock and immediately available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE-compliant, from a Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Power requirement: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 contour control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system, and programming examples >> Handwheels Csdpfx Adjxupc Uemsaa >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 contour control. This machine is in excellent condition with very low operating hours and was only used for training purposes. It features very user-friendly controls. The machine also offers hydraulic clamping in both vertical and horizontal orientations. Changing from vertical to horizontal mode is quick and simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the automatic central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to view and test the machine under power at our premises. There are 7 units of the Kunzmann WF4/3 with TNC 320 Heidenhain control available. The machines are ready for immediate delivery.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE compliant, from a training workshop! Technical Data: - Year of manufacture: 2010, Machine No. 347285 - Fixed angular table - Infinitely variable spindle speed up to 4,500 rpm - Stepless feed in 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min; Z axis: 4,000 mm/min - Travel X/Y/Z: 400/350/400 mm Caedpfx Aoxupczedmoa - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic drawbar system - Weight approx. 1,800 kg - Required space approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Equipment: - Heidenhain TNC 320 contour control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare part lists, operating instructions for the control system and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Offered here is a Kunzmann WF4/3 toolroom milling machine with a Heidenhain TNC 320 control unit. This universal milling machine is in very good condition and has only seen limited operating hours. It comes from an establishment where it was used solely for training purposes. The control is very easy to use. The machine is equipped with vertical and horizontal hydraulic clamping. Switching between vertical and horizontal operation is very straightforward thanks to the fold-away vertical head. The linear guides are regularly lubricated through the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. Take the opportunity to view and test the Kunzmann under power at our facility. Seven units of the Kunzmann WF4/3 with TNC 320 Heidenhain control are available. The machines are immediately available.