Gręžimo staklės

Kunzmann WF 4/3

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, bendras aukštis: 2 100 mm, bendras plotis: 2 100 mm, bendras ilgis: 2 300 mm, stalo plotis: 450 mm, stalo ilgis: 750 mm, sukimosi greitis (maks.): 4 500 aps./min, sukimosi greitis (min.): 1 aps./min, bendras svoris: 1 900 kg, ruošinio svoris (maks.): 500 kg, Traverse paths X/Y/Z 400/350/300 mm, speeds 1 - 4500 rpm, motor 4.5 kW, spindle SK 40, Heidenhain TNC 320 control, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Fgodowb Erzjpfx Acujh

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1996, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: 340547, X ašies eiga: 400 mm, Y ašies eiga: 320 mm, Z ašies eigos atstumas: 400 mm, plunksnos brūkšnys: 60 mm, bendras svoris: 1 300 kg, stalo ilgis: 650 mm, ruošinio svoris (maks.): 250 kg, stalo plotis: 350 mm, galia: 10 kW (13,60 AG), valdiklio modelis: TNC 124, Įranga: sūkių greitis be galo kintamas, The listed milling machine is being sold as defective. Displayed error: Severe positioning error on the Z-axis. Otherwise, the machine is in good condition and was used exclusively for training purposes. Fodpfowlqtfjx Acuogh The following parts have been newly installed by the service: - Supply module - Z-axis assembly with brake - Z-axis linear measurement system - Scrapers on all axes - Filter mats - Timing belts - X-axis linear measurement system - Signal converter for measurement system Total costs for maintenance and repair amounted to €15,000. The error is still present. Due to the age of the machine and modernization of the workshop, repairs have been discontinued. The machine can be inspected by arrangement. All information is provided without any warranty.

Sąlyga: naudotas, Gamybos metai: 2005, Heidenhain TNC 310 control Dimensions (L x W x H): 2000 x 2000 x 2000 mm Machine weight: approx. 2.0 t Kunzmann Universal Milling and Drilling Machine WF 4/3 – equipped with Heidenhain TNC 310 control unit The milling and drilling machine allows for a wide range of machining operations, such as milling and drilling. Preferred materials are those commonly used in mechanical engineering, e.g. steel, cast iron (GG), and aluminium. Materials such as paper, graphite, minerals, or magnesium cannot be machined, or only with appropriate protective equipment. --> Technical Data Milling Table: --> Clamping surface: 650 x 350 mm --> T-slots: 5 --> T-slot width: 14 mm --> T-slot spacing: 63 mm --> Max. load: 250 kg --> Working Area --> X-axis: 400 mm --> Y-axis: 350 mm --> Z-axis: 400 mm --> Maximum Distances --> Table top to horizontal spindle centre: 540 mm --> Table top to lower edge of vertical head max.: 430 mm --> Milling Spindle Fgedpjwwl Inefx Acueh --> Tool holder: SK 40 --> Speeds horizontal: 5 – 4500 rpm --> Speeds vertical: 5 – 4500 rpm --> Quill stroke vertical: 60 mm --> Vertical head swivels both sides: 90° --> Feed (potentiometer 100%) longitudinal and cross: 0 – 2000 mm/min --> Rapid traverse longitudinal and cross: 5000 mm/min --> Feed vertical: 0 – 2000 mm/min --> Rapid traverse vertical: 4000 mm/min --> Drive Power --> Power at 100% duty cycle: 8.0 kW --> Power at 44% duty cycle (operating time 5 min): 9.3 kW

Sąlyga: naudotas, Gamybos metai: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm Tool holder SK 40 Spindle speed 1.0 - 4,000 rpm Feed rates 0 - 2,000 mm/min Quill stroke 60.0 mm Table size 650 x 350 mm T-slots 14 H7 Control unit TNC 124 Motor power 5.5 kW Weight 1,800 kg Required space approx. 2,000 x 1,000 x 2,100 mm Original price ~ €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swiveling control panel, positioned to the right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed: 0 - 2,000 mm/min - Y-axis feed: 0 - 2,000 mm/min - Z-axis feed: 0 - 2,000 mm/min - Centralized lubrication, electric - Coolant system - Chip tray - Operating manual for machine and control unit Special accessories included: Fodpfx Aow U U Sijcujgh - Hydraulic machine vice - Numerous tool holders - Electronic handwheel HEIDENHAIN HR 410

Sąlyga: naudotas, Gamybos metai: 2000, Used universal milling and drilling machine Kunzmann WF 4/3 with Heidenhain TNC 124 path control Travel X/Y/Z = 400/350/400 mm Speed 1-4000 rpm Vertical head with 60 mm quill Fixed angle table 650x350 mm Spindle SK40 with hydraulic tool clamping Accessories: - Heidenhain HR 410 electronic handwheel Fgjdpew U D Sxjfx Acush - Chip splash guard enclosure - Machine lamp - Coolant system - Machine mounts The machine is located with us in 71334 Waiblingen-Beinstein, is available immediately, and can be inspected at any time by appointment.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Kunzmann WF4/3 Bed-type Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2002, Excellent CONDITION CE compliant!! Technical Data: - Year of manufacture: 2002 - Fixed angle table - Spindle speed: stepless up to 4000 rpm - Stepless feed rate in 3 axes from 0 to 2000 mm/min - Travel paths X/Y/Z: 400/350/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 taper - Hydraulic tool clamping system - Weight approx. 1700 kg - Required space approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Equipment and Accessories: - Heidenhain TNC 124 control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual and programming examples Fgodpfx Aew U Exyecujh - Handwheels - Coolant system About the Machine: For sale is a Kunzmann WF4/3 bed-type milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in excellent original condition. It comes from a facility where it was only rarely used for training purposes. The control is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple by tilting away the vertical head. The guides are lubricated regularly via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location. You can find further milling machines from reputable manufacturers on our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year 2010, Excellent CONDITION with Tooling, CE-compliant! Technical Data: >> Year of manufacture: 2010 >> Fixed angle table >> Speed: infinitely variable up to 4000 rpm >> Feed rate, infinitely variable on 3 axes from 0 to 2000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Rapid traverse X/Y/Z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1700 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manuals, and programming examples Fgjdpjw Id Dzsfx Acush >> Handwheels >> Coolant system >> Toolholders, hydraulic vise, clamping tools About the Machine: Offered is a Kunzmann WF4/3 universal milling machine with Heidenhain TNC 124 control in outstanding original condition. The machine is from a facility where it was only lightly used for training purposes. The control is very easy to operate. Additionally, the machine features hydraulic clamping for both vertical and horizontal axes. Changing from vertical to horizontal operation is very simple thanks to the swivel-mounted vertical head. All guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested in our workshop. Take the opportunity to inspect and test the Kunzmann under power on site.

Sąlyga: naudotas, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture: 1998 Travel distances X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed range 40 - 2500 rpm Feed rates X, Y and Z axes 0 - 1000 mm/min, infinitely variable Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill travel vertical 60 mm Spindle drive power 3 kW Electrical connection 400 Volt, 50 Hz - CNC contouring control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable electronic variator drive - Vertical milling head swivels +/- 90° Fjdpfx Acjlvyrbsujgh - Hydraulic tool clamping - Fixed angle table - Control cabinet fixed to machine - Coolant tank with pump adjacent - Centralized lubrication system - Lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg In good condition

Gamybos metai: 2001, Sąlyga: paruoštas naudoti (naudotas), X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000 rpm, quill stroke: 60mm, max. feed rate: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not operational; recurring faults occur: issues with motion monitoring on the Z- and Y-axes, significant positioning error on the Z-axis, malfunctions when moving the control cabinet. The ready-to-operate controller is missing and an error is constantly displayed on startup. After several attempts, a reference run is possible. The spindle gearbox is worn out. An on-site inspection is possible. Fedpfxjuqacwj Acuogh

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 2 542 h, Funkcionalumas: visiškai funkcionalus, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Fodpfxsw D D Sfj Acuegh Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp